Building Works

Name of Work :: Construction of E-2 type Bunglow for Principal District Judge near District court compound at Nadiad, Dist. Kheda

Bill of Quantities (BOQ)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[1] Excavation for foundation upto 1.5 m depth including sorting out 895.00 Cum 117.08

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

[2] Excavation for foundation for depth from 1.5 m to 3.0 m including 257.00 Cum 162.38

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

[3] Filling available excavated earth (excluding rock) in trenches. 745.00 Cum 130.39

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

[4] Filling in foundation and plinth with murrum or selected soil in 53.00 Cum 282.02

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

[5] Filling in plinth with sand under floors including watering 44.00 Cum 460.18

ramming, consolidating and dressing complete

[6] Applying general insecticide pest control treatment to floors, 637.00 Sqm 89.28

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration

by mass) is recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

[7] Providing and laying controlled cement concrete M.150 for curing 57.00 Cum 3860.16

complete excluding cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings,Base of

columns and Mass concrete

[8] Providing and laying controlled C.C.M.250 & curing complete 117.00 Cum 4502.04

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in foundation,

footing bases of columns and the like and mass concrete

[9] Providing and laying controlled C.C. M.250 & curing complete 31.00 Cum 7604.02

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work including all .in

Columns upto Plinth

[10] Providing and laying controlled cement concrete M-250 and 68.00 Cum 5800.73

curing complete including the cost of form work but excluding the

cost of reinforcement for reinforced concrete work in Plinth

[11] Providing and laying cement concrete 1:3:6 ( 1 cement: 3 coarse 267.00 Cum 3172.71

sand: 6 crushed stone aggregate 40 mm nominal size ) and curing

complete excluding cost of form work & including all in

foundation and plinth.

[12] Providing and laying controlled cement concrete M.150 for curing 66.00 Cum 3860.15

complete excluding cost of formwork and reinforcement for

reinforced concrete work in Plinth slab

[13] Providing and laying controlled C.C. M.200 & curing complete 28.00 Cum 7549.79

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns for

[14] Providing and laying controlled C.C. M.200 & curing complete 6.00 Cum 7589.58

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns for First

[15] Providing and laying controlled cement concrete M.200 and curing 50.00 Cum 6073.26

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in Beams

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[16] Providing and laying controlled cement concrete M.200 and curing 11.00 Cum 6113.05

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in Beams First

[17] Providing and laying controlled cement concrete M.200 and curing 24.00 Cum 7446.85

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in Lintel /

Coping Ground Floor

[18] Providing and laying controlled cement concrete M.200 and curing 3.00 Cum 7486.64

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in Lintel /

Coping First Floor

[19] Providing and laying controlled cement concrete M.200 and curing 3.30 Cum 8069.37

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in CHHAJJA

including finishing coat CM (1:3) for chhajja plaster Ground Floor

[20] Providing and laying controlled cement concrete M.200 and curing 1.00 Cum 8109.16

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in CHHAJJA

including finishing coat CM (1:3) for chhajja plaster First Floor

[21] Providing and laying controlled cement concrete M.200 and curing 60.00 Cum 6128.46

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in SLAB

[22] Providing and laying controlled cement concrete M.200 and curing 13.00 Cum 6168.26

complete including the cost of formwork and but excluding the

cost of reinforcement for reinforced concrete work in SLAB First

[23] Providing and laying controlled cement concrete M.200 and curing 2.00 Cum 6651.55

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Staircase Ground

[24] Providing TMT Bar FE 500D reinforcement for R.C.C. work 48921.00 Kg 76.21

including bending, binding and placing in position complete upto

Ground Floor level

[25] Providing TMT Bar FE 500D reinforcement for R.C.C. work 4210.00 Kg 77.21

including bending, binding and placing in position complete upto

First Floor level

[26] Brick work using common burnt clay building bricks having 172.00 Cum 4021.02

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

[27] Brick work using common burnt clay building bricks having 250.00 Cum 4289.32

crushing strength not less than 35 kg./Sq.Cm. in Super Structure

superstructure above plinth level in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) (B) Conventional for Ground Floor

[28] Brick work using common burnt clay building bricks having 76.00 Cum 4329.51

crushing strength not less than 35 kg./Sq.Cm. in Super Structure

superstructure above plinth level in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) (B) Conventional for First Floor

[29] Half brick masonry in common brunt clay building bricks having 48.00 Sqm 641.16

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:5 (1- Cement : 5 -coarse sand ) in superstructure above plinth

level (B) Conventional for Ground Floor

[30] Half brick masonry in common brunt clay building bricks having 4.00 Sqm 647.16

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:5 (1- Cement : 5 -coarse sand ) in superstructure above plinth

level (B) Conventional for First Floor

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[31] Providing and fixing G.I. hexagonal chickenmesh of size 20mm x 135.00 Sqm 178.45

20mm of 24 gauge at junction of concrete and brick work or

between different materials after making "V" grove between two

different material surface and filled with rich cement mortar and

@ 100mm on each side of surfaces including necessary "U" nails /

screws / washers with cleats for fixing, overlaps, scaffolding at all

floors / all levels / all heights / all shapes etc. complete as per

drawing / specifications and direction of Engineer-in-charge.

[32] Providing and fixing 35 mm thick single shutter flush door (with 30.00 Sqm 3405.01

pattern laminate on both side in situ lamination work) , solid core

construction with frame of first class hardwood with cross board

and face veneer or plywood face panels, lipping with teak wood

battens 25 mm minimum depth on all edges of flush door

shutters, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters , Shutters

with both side Decorative 1 mm thick Laminated sheet, pattern

and design is to be approved by the Engineer In Charge with SS

handle, Tower Bolt, magnetic door catcher,6 lever Mortise lock

with two key set etc. complete as directed by Engineer In Charge.

[33] Providing and fixing 35 mm thick double shutter flush door (with 8.00 Sqm 2826.70

pattern laminate on both side in situ lamination work) , solid core

construction with frame of first class hardwood with cross board

and face veneer or plywood face panels, lipping with teak wood

battens 25 mm minimum depth on all edges of flush door

shutters, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters , Shutters

with both side Decorative 1 mm thick Laminated sheet, pattern

and design is to be approved by the Engineer In Charge with 4 SS

handle, 2 Tower Bolt, 2 door stopper, 2 heavy duty aldrop etc.

complete as directed by Engineer In Charge.

[34] Providing and fixing FRP of 35mm thick Fiber Glass shutter with 19.00 Sqm 1269.63

1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed

panel design having extra reinforcement on sides & edges & in Gel

coat finish. The core of the shutter is to be filled up with injected

retardent grade polyurethane foam done in situ alongwith

embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof

,weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings.

[35] Providing and fixing rolling shutters of approved make made of 80 29.00 Sqm 3503.40

mm wide M.S. laths inter-locked together through their entire

length and jointed together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates, guide channels

and arragements for inside and outside locking with push-pull

operation including the cost of hood cover and spring etc.

complete.(A) Shutters having width below 3.5 M.

[36] Providing and fixing Hood cover for rolling shutters (A) Shutters 6.00 Rmt 121.23

having width below 3.5 meters

[37] Providing and fixing M.S. grills of required pattern to wooden / 5234.00 Kg 107.36

stone frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed bolts

and nuts or by screws including one coat of primer and two coats

of matt finished oil painting etc complete.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[38] Providing and fixing four track standard extruded colour anodized 21.00 Sqm 4674.37

aluminum section of best quality brand equivalent to JINDAL

Series E (30 mm) section numbers are shutter top & bottom-

20993, shutter inter lock - 20550, shutter side (handle) -

frame-bottom with gutter- 21198, frame top & side - 21204 with

three shutters with 5 mm thick transparent bronze colour tinted

float glass and One shutter with Stainless Steel wire net with

rubber gasket,air lock strip and finishing joints with silicon sealant,

with standard extruded colour anodized aluminum coated fittings

and fixture with mosquito net shutter etc. complete as per

instruction of Engineer In Charge for Window.

[39] Providing and fixing three track standard extruded colour 13.00 Sqm 4288.75

anodized aluminum section of best quality brand equivalent to

JINDAL Series E (30 mm) section numbers are shutter top &

bottom- 20993, shutter inter lock - 20550, shutter side (handle) -

20553, frame-bottom with gutter- 21203, frame top & side -

20837 with three shutters with 5 mm thick transparent bronze

colour tinted float glass and One shutter with Stainless Steel wire

net with rubber gasket,air lock strip and finishing joints with

silicon sealant, with standard extruded colour anodized aluminum

coated fittings and fixture with mosquito net shutter etc.

complete as per instruction of Engineer In Charge for Window.

[40] Providing and fixing glazed louvered glass windows and ventilators 4.40 Sqm 4143.56

with teak wood frame 10cm. x 7cm. Size including 3 coats of oil

painting to wood work etc.complete.

[41] Providing and fixing Mirror polished GRANITE stone slab 18 mm 108.00 Sqm 3150.36

thick (selected colour and shade) for For Doors / WIndows cill &

Jambs Clading as per design incl. full moulded round both edge on

10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand )

jointed with grey cement slurry including rubbing and polishing

etc. complete as per instruction of Engineer In Charge.

[42] Providing and laying polished GRANITE stone slab 18 mm thick 7.70 Sqm 2279.37

with moulded edge (selected colour and shade) slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

[43] Providing & Laying G.V.T. 600X600 MM & 10 MM THK GLOSSY tile 199.00 Sqm 1248.74

flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete

[44] Providing and laying G.V.T. 600X600 MM & 10 MM THK GLOSSY 30.00 Sqm 1141.45

tiles matching with flooring in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry etc. complete as per instruction

of Engineer In Charge.

[45] Providing & Laying 600X600 MM & 10 MM THK MATT FINISH 14.50 Sqm 1397.82

G.V.T. TILES over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[46] Providing and laying 600X600 MM & 10 MM THK MATT FINISH 1.60 Sqm 1141.45

G.V.T. TILES matching with flooring in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry etc. complete as per

instruction of Engineer In Charge.

[47] Providing & filling 3-4 mm wide groove filled with Epoxy grout of 150.00 Rmt 48.08

best quality Brand as directed by Engineer In Charge.

[48] Providing and laying Hand dressed polished Kota stone slab 17.00 Sqm 1090.44

flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

[49] Providing and laying polished kota stone slab 25mm thick in risers 5.00 Sqm 1127.84

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

[50] Providing and laying 300X300 MM & 10 MM THK MATT FINISHED 36.00 Sqm 908.32

GLAZED TILES in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

[51] Providing and laying 300X900 MM & 10 MM THK GLAZED TILES 149.00 Sqm 1033.83

DADO in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

[52] Providing and Fixing Polished Kota Stone Slab Green. 30 mm thick 4.00 Sqm 595.83

shelves resting on wall fix and jointed with white cement slurry

including rubbing, polishing, labour charges, finishing etc.

complete as directed.

[53] Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 358.00 Sqm 686.90

concrete Designer Paver block (Similar to VYARA) 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

[54] Providing and fixing pre-cast concrete kerb stone of gray cement 191.00 Rmt 384.96

based concrete block 30cm length,30cm height and 15cm thick of

M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

[55] Providing 15mm thick mala cement plaster in single coat on Rough 1327.00 Sqm 194.07

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand) for Ground Floor level

[56] Providing 15mm thick mala cement plaster in single coat on Rough 295.00 Sqm 216.82

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand) for First Floor level

[57] Providing 10mm thick cement plaster in single coat on 338.00 Sqm 169.25

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

cement:3-sand) for plastering on ceilings and sofits of stairs

Ground Floor Level

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[58] Providing 10mm thick cement plaster in single coat on 71.00 Sqm 192.01

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

cement:3-sand) for plastering on ceilings and sofits of stairs First

[59] 20mm thick sand faced cement plaster on walls upto height 10 1396.00 Sqm 335.65

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

[60] Applying two coats of putty & two coats of water based primer of 1644.00 Sqm 40.59

approved brand and manufacture on new wall surface to give an

even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

[61] Wall painting (three coats) with plastic emulsion paint (shade and 1168.00 Sqm 119.42

colour to approved by chief architect office,gandhinagar )of

approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth.

[62] Wall painting (three coats) with plastic emulsion paint (shade and 409.00 Sqm 124.68

colour to approved by chief architect office,gandhinagar )of

approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth.

for painting on ceilings and sloping roofs.

[63] Wall painting (three coats) with plastic emulsion paint IN SPECIAL 67.00 Sqm 249.18

EFFECT (ROYAL PLAY) (shade and colour to approved by chief

architect office,gandhinagar )of approved brand and manufacture

on wall surfaces to give an even shade including thoroughly

brushing the surface free from mortar dropings and other foreign

matter and sand papered smooth

[64] Applying one coat of Exterior Primer of approved brand and 2356.00 Sqm 67.84

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

[65] Finishing wall with TWO COATS OF 100% WEATHER PROOF 2356.00 Sqm 114.53

ACRYLIC EMULSION WATER REPELLANT PAINT (shade and colour

to approved by chief architect office,gandhinagar ) on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

[66] Providing and laying water proofing treatment with china mosaic 361.00 Sqm 1125.04

tiles flooring over avg. 50 mm thick C.C. 1:2:4 {1 Cement : 2 sand :

4 Kapachi / Gritt 6 to 12 mm size} bedding for maintaining slope

for plain and curve surface & 12 mm to 20 mm of broken piece of

seramic / glazed tiles ( one for more color as directed ) to be laid

over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

containg one Kg of water proofing materials per bag of O P C at

plain or / and slops and to be tempered to bring mortar ceramic

up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm

along the wall and curing with bends any pattens or design as per

drawing and cleaning by using oxalic acid etc complete.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[67] Providing laying and jointing in true line and level 15mm dia. 50.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[68] Providing laying and jointing in true line and level 25mm dia. 80.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[69] Providing laying and jointing in true line and level 50mm dia. 240.00 Rmt 195.66

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[70] Providing, laying and jointing in true line and level 110 diametre 180.00 Rmt 835.15

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[71] Providing and fixing concealed center point to wall ceiling & floor 40.00 Rmt 166.86

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

[72] Providing and fixing concealed center point to wall ceiling & floor 55.00 Rmt 249.72

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

[73] Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 60.00 Rmt 277.43

working pressure polythene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clipsetc. including making good the wall ceiling and

[74] Providing laying (to level or slopes) and jointing reinforced 60.00 Rmt 240.21

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete.(B) 150mm

[75] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 20.00 Each 558.36

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

[76] Providing and fixing screw down bib taps of following size.(B) 20.00 No 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[77] Providing and Fixing C.P. Pillar cock 15 mm Ø Heavy duty swan 11.00 Each 799.45

neck including fixing with CP brass nipple including all labour &

material etc. complete as per instruction of Engineer In Charge.

[78] Providing and Fixing C.P. Angle stop cock 15 mm Heavy duty with 20.00 Each 558.92

cap including all labour & material etc. complete as per instruction

of Engineer In Charge.

[79] Providing and fixing COUNTER WASH BASIN-COLMID SNOW 3.00 Each 6195.79

WHITE COLOUR-500 X 395 X 135 MM with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting holes

and making good the same with brass union and CP brass wall

discharge pipe with flanges and cap of best quality brand , Waste

Pipe for Wash basin C.P. 32 mm dia with fittings up to floor trap,

32mm dia CP brass waste coupline with CP chain and rubber plug,

washer and CP brass cap complete in all respects including

cutting and making good the walls RCC work as directed and

making good the same etc. complete.

[80] Providing and fixing WALL HUNG EWC: CUTINA (WITH DUROPLAST 5.00 Each 16525.06

SLIM SOFT CLOSE SEAT COVER) SNOW WHITE COLOUR-550 X

X 375 MM with integral "P" and "S" trap including jointing the tra

best quality brand including providing and fixing plastic seat cover

for wash down WC with CP brass hinges and rubber buffers back

plastic seat and including providing 12.50 Litres low level flushing

cisten with a "P" air of CI or MS bracket with complete fitting such

as lead valve Sipron 15mm dia brass ball valve with polythene

float CP brass handle, unions and couplings for connection with

inlet outlet and overflow pipes 40mm dia porcelain enamelled

flush bend, including jet spray operated with necessary valve of

best quality brand including cutting holes in walls and making

good the same connecting the flush bend with cistern and closet

vitreous china etc. complete.

[81] Providing and fixing COUNTER WASH BASIN - CLIFF SNOW WHITE 6.00 Each 4030.35

COLOUR-550 X 460 X 185 MM with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same with brass union and CP brass wall

discharge pipe with flanges and cap of best quality brand , Waste

Pipe for Wash basin C.P. 32 mm dia with fittings up to floor trap,

32mm dia CP brass waste coupline with CP chain and rubber plug,

washer and CP brass cap complete in all respects including

cutting and making good the walls RCC work as directed and

making good the same etc. complete.

[82] Providing and fixing WALL HUNG EWC: CORDO (WITH CROFT 4.00 Each 8727.86

SOFT CLOSE SEAT COVER) SNOW WHITE COLOUR-535 X 360 X

MM with integral "P" and "S" trap including jointing the tra best

quality brand including providing and fixing plastic seat cover for

wash down WC with CP brass hinges and rubber buffers back

plastic seat and including providing 12.50 Litres low level flushing

cisten with a "P" air of CI or MS bracket with complete fitting such

as lead valve Sipron 15mm dia brass ball valve with polythene

float CP brass handle, unions and couplings for connection with

inlet outlet and overflow pipes 40mm dia porcelain enamelled

flush bend, including jet spray operated with necessary valve of

best quality brand including cutting holes in walls and making

good the same connecting the flush bend with cistern and closet

vitreous china etc. complete.

[83] Providing and fixing C.P. Brass health faucet with rubbit cleaning 8.00 Each 1173.53

system 1.25 mt. long P.V.C. Flexible tubes and ABS wall hook with

angular stop cock with extension nipple 62 mm long etc. complete.

[84] Providing and fixing Concealed cock 15 mm Ø Heavy duty with cap 22.00 No 675.38

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[85] Constructing brick masonry chamber for underground C.I. 27.00 No 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

[86] Providing and fixing S.W. gully trap with C.I. grating brick masonry 8.00 Each 1292.19

chamber and water tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i) Square mouth traps.

(A) 100mm x 100mm size P type.

[87] Providing erecting and fixing double coated ISI water tank of 5000.00 Liter 3.95

required capacity each with all necessary fittings and connection

etc. complete on terrace

[88] Providing and fixing in position cowel went to pipes.(C) 100mm dia 8.00 No 501.87

[89] Providing and fixing C.P. brass shower rose with 15mm or 20mm 4.00 No 282.16

inlet.(A) 100mm dia. Each

[90] Providing and Fixing 18 mm thick in polished granite shelves / 3.00 Sqm 2008.65

Counter with extra outer edge 50 mm x 19 mm strip as per

drawing with full round moulded edge resting on wall fix and

jointed with white cement slurry including rubbing, polishing,

labour charges, finishing etc. complete as directed.

[91] Providing and fixing 600mm x 450mm bevelled edge mirrror of 9.00 No 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

[92] Providing and fixing C.P. brass towel rail comlete with C.P. brass 6.00 No 603.19

brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x

[93] Providing and fixing C.P. Towel Ring Square or round shape of 10.00 No 1352.74

Good Quality Brand as directed by Engineer in charge including

fixing as and where directed etc. complete.

[94] Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size 15.00 Each 958.17

having weight not less than 35Kg.

[95] Constructing Sandwitch Platform of 18 mm thick Polished Black 5.20 Sqm 6512.34

Granite at top & both end side vertical polished black granite of

height 4 - 5 ft, Front edge of 4" wide 18 mm thick Polished Black

Granite Edge, Wall side of 4" wide 18 mm thick Polished Black

Granite Edge and 30 mm thick Kota stone slab flooring fitting at

bottom with cementing Materials / adhsives including macking

necessary grooves in walls with Vertical Kotastone 30 mm x 2 No

sandwitch thick every 60 cm centre to centre including all labour

material of approved quality incl. full moulded round front edge

of granite & fixed in wall for partition and jointed with grey

cement slurry including rubbing and polishing etc. complete

[96] Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick 3.00 No 2643.47

with over all size 610 x 460 mm & bowl size 560 x 410 x 200 with

single hole for pillar tap Fixing in sandwich platform including

cutting holes and making goods the same, necessary fixtures,

connections and waste pipes etc complete

[97] Providing and fixing Heavy Handle valve of aprroved brand & 10.00 Each 440.16

follwing internal dia of Brass including fixing in pipe lines

etc.complete (A) 15 mm Dia

[98] Providing and fixing Heavy Handle valve of aprroved brand & 10.00 Each 510.86

follwing internal dia of Brass including fixing in pipe lines

etc.complete (A) 25 mm Dia

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[99] Providing and fixing Heavy Handle valve of aprroved brand & 12.00 Each 682.56

follwing internal dia of Brass including fixing in pipe lines

etc.complete (A) 40 mm Dia

[100] Providing and fixing Butterfly valve of aprroved brand & follwing 12.00 Each 970.41

internal dia of Brass including fixing in pipe lines etc.complete (A)

[101] Providing and fixing stainless steel (Grade 304) railing made of 131.00 Kg 494.90

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and

bolts,brackets etc. complete including fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc. of required size, on the top of the floor or the side

of wall with suitable arrangement as per approval of Engineer-in-

charge( for payment purpose only weight of stainless steel

members shall be considered including all fixing accessories such

as nuts, bolts, fasteners etc.) Complete as directed.

[102] Providing and fixing Butterfly valve of aprroved brand & follwing 10.00 Each 1186.90

internal dia of Brass including fixing in pipe lines etc.complete (A)

[103] Provding P.V.C. 100 mm diameter water spouts including 19.00 Each 159.37

necessary iron gratings as per drawings.

[104] Clearing and grubbing road land including uprooting rank 0.86 Hectare 80243.79

vegetation grass bushes,shrubs,sapling and trees girth up to

mm removal of stumps of trees cut earlier and disposal of

unserviceable materials(A) By manual means in area of light jungle

[105] Providing, laying, spreading and compacting graded stone 23.40 Cum 1103.10

aggregate to Wet Mix Macadam (WMM) including Spreading the

stone aggregate for rolling including filling the interstices to

required camber and gradient

[106] Steel work, welded in built up sections framed work including 18.40 Qtl 9725.85

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (D) In trussses and trussed purlins, upto 25 M. span

and 15 M. ovarall height.

[107] Providing and fixing 0.90 m high fencing with M.S. angle posts of 165.00 Rmt 353.50

size 40 mm × 40 mm × 6 mm, fixed at 2.50 m centre-to-centre,

including three coats of oil painting. The fencing shall consist of

three horizontal lines and two diagonal lines of galvanised steel

barbed wire weighing 9.38 kg per 100 m, along with razor wire of

0.5 mm blade thickness and 2.5 mm core wire, with coil diameters

ranging from 300 mm to 1500 mm. The barbed wire and razor

wire shall be properly strained and fixed to the posts using G.I.

staples, including fixing the posts on the compound wall,

complete in all respects.

[108] Providing and laying controlled C.C. M.250 & curing complete 4.00 Cum 7615.57

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work including all .in RCC

[109] Providing cement vata (10cm. x 10 cm. size) quarter round in 21.00 Rmt 23.68

cement mortar 1:1 including neat cement finishing, watering etc.

[110] Excavation for foundation for depth from 3.0 m to 5.0 m including 16.00 Cum 308.38

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(D) Soft rock not requiring

[111] Box cutting the road surface to proper slope and camber for 333.00 Cum 104.20

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[112] Supplying and stacking of graded stone aggregate of following 169.00 Cum 1150.60

size (for W. B. M. ) including Spreading the stone aggregate for

rolling including filling the interstices to required camber and

Machine crushed stone aggregate 45 mm to 63 mm size

[113] Supplying and stacking of Soft murrum / Binding materials 43.00 Cum 669.71

including spreading road crust filling the gaps in metal and

leveling to camber and gradient as directed.

[114] Rolling and consolidating water bound macadam (except laterite 1125.00 Sqm 21.00

and Kankar) including watering not exceeding 150mm thickness

(Main layer including binding materials ) including filling in

depressions which occur during the process.(A) With power roller

exceeding 8 tonne and not exceeding 12 tonne.

[115] Providing and laying controlled C.C.M.250 road pavement & 167.00 Cum 5068.64

curing complete including the cost of form work but excluding the

cost of reinforcement for reinforced concrete work in RCC road

including Compaction and finishing of cement concrete road by

trimix process providing extra labour charges for the trimix vacum

dewatering service process on cement concrete road surface by

using vacum dewatering pump floater surface vibrator including

making grooves , filling grooves and rough finish to surface as per

in including levelling the complete etc. complete as per instruction

of Engineer In Charge.

[116] Supplying promoulded bituminous joint filler.(i) 12mm thick 2.00 Cum 553.79

[117] Providing and fixing PROFLEX type self Supported Roof {Arch 31.00 Sqm 1848.30

Type} using Cold rolled, Galvalume Steel colour coated sheet

mm thick conforming to ASTMA 653, A792 DIN, Alu Zinc Coating :

AZ150 and Regular Modified Polyester painting with epoxy primer

service coat at bottom, including necessary fixtures & fastenings

for Lighting arrangement in parking shade, design & shape as

approved by Engineer in charge etc. complete.

[118] Providing & Fixing filled New ABC Dry Chemical Powder type 2 Kg. 6.00 Each 1888.70

capacity fire extinguisher as per IS 2171 ISI mark including all

required accessories like hose pipe ,Belt, Valve, Pressure Meter,

horn etc.. Including all labour,material & carting etc complete as

per instruction of Engineer In Charge.

[119] Providing & Fixing filled New ABC Dry Chemical Powder type 6 Kg. 6.00 Each 3014.85

capacity fire extinguisher as per IS 2171 ISI mark including all

required accessories like hose pipe ,Valve, Pressure Meter, horn

etc.. Including all labour,material & carting etc complete as per

instruction of Engineer In Charge.

[120] Drilling of Tubewell by direct rotary rig in alluvial starta 100.00 Rmt 756.49

Drilling of Pilot bore hole in Alluvial strata by direct Rotary rig.of

size 250 mm diameter.

Alluvial area complete upto 300 m (kheda District)

[121] Reaming of 250/300 mm dia. pilot bore hole including assembling, 100.00 Rmt 465.61

lowering housing casing ,strainer pipes, gravel packing, clay

packing etc. 550 mm dia

[122] Providing and supplying in standard length ISI mark rigid 90.00 Rmt 920.11

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no. 4985/1988

including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores and including cost of

jointing meterial etc. complete.(3.1/B) Test Pressure 6 Kg/cm2 (9)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[123] Lowering and removing of 100 mm dia dropline and 32 mm dia 100.00 Rmt 149.48

airline for development of each water bearing Zones come across

up to full depth of Deep tubewell of size 200 mm/250 mm/300

mm dia for the tubewell having depth upto depth 186 Meter

depth through suitable air compressor. The job is for complete

period of development of tubewell.( where water is very deep and

2/3rd submersion is not achived.) All the required accessories,

machineries etc for above job will have to be provoded by

[124] Providing and lowering of 200 mm dia PVC Test Pressure 6 Kg/cm2 30.00 Rmt 404.00

slotted pipe etc complete as per instruction of Engineer In Charge.

[125] Clamp made from M.S. plate with 3 holes on either side with nuts 2.00 Per Pair 1643.98

& bolts of Std. Make and suitable size.

(g)750 mm X 75 mm X 16 mm flat to 200 mm dia.Pipe.

[126] Bore plug of 100 mm height made from MS plate with 3 holes at 1.00 No 782.56

equal distance on circumference for nut-bolts type, locking

arrangement with nutsbolts & lock nuts of standard make etc.

(B) From 5 thick M.S. Plate (For Top also)

(ii) Suitable for 200 mm dia pipe.

[127] Bail plug of length 0.45 meter made from MS medium class pipe 1.00 No 851.03

as per IS suitable for

(B) 200 mm dia pipe.

[128] Steel bent plate suitable to ERW pipe as detailed below ERW Pipe 1.00 No 67.25

Size in mm.(b) 200 mm dia. 150 X 150 X 6 mm

[129] Supply of best quality well sorted Sevaliya gravel of size ranging 15.00 Cum 2049.29

from 4 mm to 6mm.

[130] Electrologger charges (With carting) (B) For other dept. 1.00 Job 18180.00

[131] Air Compressor 1.00 LS 27603.30

Charges of air compressor for test of tube well by air compressor

of 900 CFM / 200 PSI capacity Upto clear water discharge

[132] Geophysical & geohydrological ground water investigation for 1.00 No 14428.86

finalisation of one pin point including vehicle charges.

[133] Manufacture, supply and delivery of 65 mm size CI pipe adaptor 1.00 Set 745.69

and pump adaptor for UPVC column pipes.

[134] Manufacture, supply and delivery of following ISI marked HDPE 150.00 Rmt 84.84

pipes (IS:4984/1985 with latest amendment) having material

Grade PE-80 in approximate 100 meter coil length or as per

GWSSB requirement with SS- 316 nipple at both ends having

TPI threads as per specifications, press fitted and bolted having

nominal diameter as under as per detailed technical

specifications.

iii)DN 50 PN-10

[135] Supply of nut bolt rubber packing and required materials and 1.00 LS 3030.00

dilevery connection for new bore.

[136] Providing Rain Water Harvesting 2 m. x 2 m x 4 m Pit for water 1.00 No 60612.70

logging with excavation in any strata up to 4 m depth, filling the

pit with brick bats in 0.6 m depth, 0.30 m depth with 10 mm To

mm Kapchi, 0.30 m depth with 6 to 10 mm grit and 2.00 m depth

with coarse sand in layers including making P.V.C. Pipes 10 kgf /

Sq.cm. 110 mm dia. line for water inlet etc. as directed, 300 mm

dia bore up to 50 Mtr. depth and 160 mm dia perforated PVC pipe

casing - 48 Mtr. length and making connections etc. complete as

directed for recharge well for rain water harvesting.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[137] Providing, laying and jointing in true line and level 160 diametre 120.00 Rmt 831.22

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[138] Providing and constructing a Filter Chamber of size 3.06 x 2.21 x 1.00 No 56283.44

1.20 mt. as including connecting of rain water pipes as per detail

drawing and as directed by Engineer-in-charge.

[139] Lawn Grass:- Supplying & Filling the area upto the depth of 30 cm. 7127.00 Sqm 242.40

with good quality of field fertile soil, preparing soil for planting by

supplying and mixing Farm yard Manure at the rate of 5 Cum per

100 Sq. Mtr. Area , providing and planting suckers of pure dharo

(doob) grass roughly at 10 cm X 10 cm distance and maintaining

till well established etc. complete. (about 90 days)

[140] Providing and plantation of Ornamental plants like areca palm, 36.00 No 681.75

bottle palm,adenium or equivalent etc. by digging of pit size

2x2x2 ft including DAP, Pestisides, plantation and saplings and

making proper Tree basin and putting proper support like bottle

palm,Areca Palm, Adenium or equivalent etc of 2ft to 6ft height

well growth or as directed by engineer in charge and maintaining

till well established etc. complete. (about 90 days)

[141] Providing and plantation of plants like Kadam, ,English Rose or 50.00 No 303.00

equivalent etc by digging of pit size 2x2x2 ft including DAP,

Pestisides, plantation and saplings and making proper Tree basin

and putting proper support of 2ft to 4ft height well growth or as

directed by engineer in charge and maintaining till well

established etc. complete. (about 90 days)

[142] Providing and plantation of Cycus by digging of pit size 2x2x2 ft 30.00 No 4040.00

including DAP, Pestisides, plantation and saplings and making

proper Tree basin and putting proper support like cycus plant of

3ft to 6ft height well growth or as directed by engineer in charge

and maintaining till well established etc. complete. (about 90 days)

[143] Providing and plantation of Decorative Plants with good quality 120.00 No 75.75

manure & Soil plant likes Canna,Mogra, Allamanda, Jasmine,Desi

Gulab,Parijaat,Ratrani etc or equivalent of well growth or as

directed by engineer in charge and maintaining till well

established etc. complete. (about 90 days)

[144] Providing tree plants having minimum 1.00 mt. height and healthy 80.00 No 252.50

growth of various kinds as like Platform gulmahore Kananj Ambla,

Ranitree, Saptaparni, Cherry, Cryjeliya, Spethodia, Paras Pipala,

Gromalo, Nem, Borsalli,Buch, Chompo, Asopalav and as suggested

etc. complete.as directed by engineer in charge and maintaining

till well established etc. complete. (about 90 days)

[145] Point wiring for Tissino / Modular secondary light point with 2-1.5 3.00 Pt. 120.19

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with earth continuity

and necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed.(j) in existing pipe erected concealed in wall/ceiling

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[146] Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 99.00 Pt. 410.06

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp holder with

adaptor/ceiling rose / H.D.Connector as directed.(j) in existing

pipe erected concealed in wall/ceiling complete.Cat.III

[147] Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 12.00 Pt. 556.51

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(j) in existing pipe erected concealed in

wall/ceiling complete.Cat.III

[148] Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 25.00 Pt. 425.21

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.[I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

db board.(j) in existing pipe erected concealed in wall/ceiling

complete.Cat.III

[149] Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 8.00 Pt. 567.62

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.(j) in existing pipe

erected concealed in wall/ceiling complete.[II] For 16A Plug and

16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

[150] Point wiring for on board Looped Plug with 6A Modular type 57.00 Pt. 257.55

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories.Cat.III

[151] Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm 12.00 Pt. 514.09

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.(j) in existing pipe erected concealed in

wall/ceiling complete.Cat.III

[152] Providing following type of Modular Type Accessories mounted 3.00 Each 398.95

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(5) Electronic hum Free steps EME Fan

regulator.cat-III

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[153] Providing following type of Modular Type Accessories mounted 55.00 Each 25.25

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(7) Blank Plate Single cat-III

[154] Providing following type of Modular Type Accessories mounted 10.00 Each 180.79

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(9) 16 Amp. SP one way switch.cat-III

[155] Providing following type of Modular Type Accessories mounted 15.00 Each 199.98

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(10) 6/16Amp. Universal socket cat-III

[156] Providing following type of Modular Type Accessories mounted 5.00 Each 410.06

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double

Pole Modular MCB Switch.Cat.III

[157] Providing and erecting ISI mark Medium class RIGID PVC PIPES of 1997.00 Rmt 24.24

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved

manner as directed (a)20 mm

[158] Providing & erecting PVC Corrugated Flexible Conduit with 30.00 Rmt 21.21

required nos. of coupling, PVC bushes, Check-nuts etc. complete

of following sizes.(2) 25 mm.

[159] Providing and erecting Mains with 1.1 KV grade FRLS PVC 890.00 Rmt 62.62

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size.(E) in

existing pipe.(b) 2 wire 2.5 sq. mm

[160] providing and erecting Mains with 1.1 KV grade FRLS PVC 100.00 Rmt 240.38

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size.(E) in existing pipe.(h)

4 wire 6 sq. mm

[161] Supplying and erecting Flexible PVC insulated multistrand 62.00 Rmt 46.46

multicore 1.1 kv grade ISI marked copper wires of following size to

be erected as directed. e) 1.50 Sq.mm 3 core round PVC sheathed

[162] Providing & Erecting approved make following size of TV Co-axial 210.00 Rmt 62.62

flexible cable comprising inner conductor of solid bare copper

insulated with Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.(e) RG-11

[163] Supplying & erecting approved make LAN cable of following size in 245.00 Rmt 47.47

existing pipe as per direction.[C] CAT -

[164] Providing & Erecting 3mm thick acrylic Sheet with grooving as 1000.00 Sq.Inches 3.03

[165] Providing & erecting Switch board for Computer or electric 1.00 Each 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed.1

no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch.3 nos. 6A 5 pin Plug.For Modular Type

Accessories.Cat.III

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[166] Decorative call bell Ting-tong box type 250 volts complete erected 3.00 Each 71.71

[167] Supplying & erecting Electronic Type Cordless Call Bell erected on 1.00 Each 250.48

PVC/Metal board having portable bell push working on D.C. & bell

on 230V A.C. supply with cells / battery

[168] Supplying and erecting LED indoor fittings with LEDs of wattage 8.00 Each 165.64

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,CCT

K to 6500K,Luminaire efficacy> 85 lumens/watt,LED driver

efficiency > 85 %,(fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)(A) Tube Light

with integral driver.(i) 5-10 Watts, Surge-2 KV, IP-20, conventional

1 to 2 feet.Cat.III

[169] Supplying and erecting LED indoor fittings with LEDs of wattage 8.00 Each 373.70

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,CCT

K to 6500K,Luminaire efficacy> 85 lumens/watt,LED driver

efficiency > 85 %,(fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)(A) Tube Light

with integral driver.(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet.Cat.III

[170] Supplying and erecting led lamps with following wattage capacity 5.00 Each 112.11

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5.(A) LED Lamps integral

type, with PC diffuser suitable LAMP holder.(ii) 5 to 8 watts.Cat.III

[171] Supplying and erecting LED indoor fittings with LEDs of wattage 54.00 Each 589.84

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 %,( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20.(iii) 16-20 watts, Surge-2

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[172] Supplying and erecting LED indoor fittings with LEDs of wattage 8.00 Each 758.51

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 %,( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20.(iv) 22-24 watts, Surge-2

[173] Supplying and erecting LED indoor fittings with LEDs of wattage 3.00 Each 573.68

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 %,( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(G) Step Light having Aluminium die

cast and ABS Plastic material.(i) 5 watts, Direct/Indirect

luminaire.Cat.III

[174] Supplying and erecting LED indoor fittings with LEDs of wattage 2.00 Each 1367.54

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 %,( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(F) Spot Light 425 Lumens, Surge-

2KV.(ii) 8 to 11 Watts.Cat.III

[175] Supplying and erecting LED indoor fittings with LEDs of wattage 5.00 Each 966.57

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 %,( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(I) Adjustable spot light with COB led

having aluminium reflector of following wattage.(ii)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[176] Supplying and erecting LED street light / Flood light fittings with 8.00 Each 4997.48

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection. (ii) above

48 to 60 WattsCat.III

[177] (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light 6.00 Each 5599.44

must have 440VAC line supply with over-voltage protection.(ii)

above 48 to 60 Watts.Cat.III

[178] Supplying and erecting LED street light / Flood light fittings with 2.00 Each 4819.72

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)(C)

Post Top Lantern LED fitting comprises of finish cast aluminum

spigot and spun aluminum canopy fixed with opal polycarbonate,

pipe arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65.(ii)32-40W.Cat.III

[179] Supplying and erecting LED street light / Flood light fittings with 8.00 Each 3161.30

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)(b)

LED Bollard fittings of minimum height 600 mm & dia.100mm

having polycarbonate clear/milky diffuser mounted on 3mm thick

aluminium finished powder coated pipe with base plate

160x160mm with erection by M8x75mm fastner with required

RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III

[180] Providing and erecting Approved make Four pole moulded case 1.00 Each 6173.12

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.ICS=100% of ICU only.Cat III

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[181] Providing and erecting Approved make Four pole moulded case 1.00 Each 6790.43

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected with 16 G.M.S. housing.ICS=100% of ICU only.Cat III

[182] Supplying & erecting approved make Four Pole 415V change over 1.00 Each 7790.13

switch interior for panel mounting with operating mechanism

A.C.23 duty confirming to IS for (C)100-125A.Cat.III

[183] providing and erecting Miniature circuit breaker single pole 0.5A 24.00 Each 270.68

to 2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.Cat.III

[184] Providing and Erecting Miniature circuit breaker single pole 6A to 60.00 Each 112.11

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat-III

[185] Providing & erecting 240 V MCB double pole switch for motor & 1.00 Each 299.97

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity.(A)

to 32 Amp.Cat.III

[186] Providing & erecting 415 V MCB Four Pole for Motor & Inductive 9.00 Each 737.30

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity.(C) 63 Amp.Cat.III

[187] Providing and erecting Sheet Steel powder coated MCB 3.00 Each 2806.99

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

for.(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI).(b) sheet steel double

door (IP-43). (I) 4 way(Concealed)

[188] Providing and erecting Sheet Steel powder coated MCB 1.00 Each 629.23

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

for.(A) single phase incoming and horizontal single phase

outgoing(b) sheet steel double door (IP-43)(i)4 way.

[189] Providing and erecting Sheet Steel powder coated MCB 1.00 Each 1382.89

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

for.(A) single phase incoming and horizontal single phase

outgoing(b) sheet steel double door (IP-43)(iii)8 way (Concealed)

[190] Providing and erecting Sheet Steel powder coated Vertical MCB 1.00 Each 7796.80

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with copper insulated busbar, isolated neutral bar,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three

phase outgoing as per following .(The DBs should be used of

same company of MCB to be used) (B)6 way outgoing. (Concealed)

[191] providing and erecting Approved make RCCBs conforming to IS: 15.00 Each 2235.13

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed.(ii) 40 Amps.

[192] Providing and erecting Annealed bare Copper wire 8 SWG. 6.00 Kg 794.87

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[193] Providing and erecting required size Copper strip for earthing of 10.00 Kg 794.87

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

[194] Supplying & erecting earth pit of minimum bore dia.150mm size 7.00 Each 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil,Length of pipe -

[195] Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 300.00 Rmt 126.25

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables (b) 4 core 6 Sq. mm

[196] Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 80.00 Rmt 510.05

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.(C) 4 core 6 Sq. mm

[197] Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 160.00 Rmt 987.78

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.(A) 4 core 16 Sq. mm.

[198] Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 30.00 Rmt 318.15

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.(D) 8 core 2.5 sq.mm.

[199] Making trench in soft soil of suitable width of 90 cm deep for 300.00 Rmt 55.55

laying cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

[200] Supplying following size of Light duty “A” Class G.I . Pipe & 10.00 Rmt 300.98

erecting as directed by Engineer-in-charge. (B) 50 mm dia

[201] Providing & laying approved make Double walled corrugated 32.00 Rmt 62.62

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable.(A)50 mm outer dia.

[202] Providing & laying approved make ISI marked HDPE 6Kg / cm2 300.00 Rmt 163.62

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing

on or floor as directed for laying of cable. The pipes as following

size of dia & weight per 6 mtr.(B) 50 mm inner Dia.

[203] Providing and, fixing heavy duty flange type brass cable gland with 16.00 Each 38.38

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.(b) 2 to

[204] Providing and, fixing heavy duty flange type brass cable gland with 10.00 Each 47.47

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.(D) 2 to

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[205] Solderless crimping type Aluminium lugs conforming to IS suitable 120.00 Each 6.06

for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

[206] Solder less crimping type Copper lugs conforming to IS suitable for 40.00 Each 12.12

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (C) 16 Sq.mm

[208] Providing & erecting Approved make Ceiling Fan with double ball 15.00 Each 2311.89

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm

sweep complete having 3 blades aluminium body and blade sets

having ornamental design shanks , canopy erected with earthing.

[ Make shall be approved by Engineer in Charge]

[209] Supplying and erecting 19 / 20 mm. nominal bore Medium Class 15.00 Rmt 108.07

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

[210] Supplying & erecting fan hook box of 10 mm M.S. round bar 15.00 Each 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

[211] Providing 2.5mm.thick laminated acrylic sheet to cover the fan 15.00 Each 18.18

hook or Fan box.

[212] Supplying & erecting approved make low noise decorative exhaust 10.00 Each 1366.53

fan having square frame ABS body with inbuilt lowers & square

frame.250mm with 1350 RPM Cat.II

[213] Supplying and erecting approved make oscillating type bracket fan 5.00 Each 2534.09

A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height

adjustment and rotary tilting device complete with guard, flexible

Core plug top complete erected with lead wires as directed.Cat.III

[214] Supplying and erecting approved make Octagonal pole made from 8.00 Each 6874.06

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.(C) 5 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 46 kg.

[215] Supplying & erecting approved make SMC press moulded 8.00 Each 898.90

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box.(A) 300mm x 200mm x 100mm [deep]

[216] Providing and erecting street light pole bracket comprising main B 8.00 Each 561.56

Class MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition & suitable

welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of

arms.[A] Single Arm bracket 1 Mtr

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[217] Supplying & erecting approved make Digital time switch having 2.00 Each 3168.37

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

[218] Supplying & erecting power contactor ,AC3 duty for time switch 2.00 Each 2782.55

complete erected as per direction. [D] 4 pole 440V 40 Amp. Cat III

[219] Providing and erecting Inverter based approved make split air- 8.00 Each 55189.43

conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco Friendly green gas

charging and 15A plug top & Remote Control & MS Stand) with

necessary core cutting.(2)For ISEER Range (KWH/KWH)(4.0 to

4.49).(B) for 1.5 ton capacity- Premium Cat.

[220] Supplying and erecting insulated pair of soft copper tubing open 43.00 Rmt 965.56

or concealed including power and control cable,necessary PVC

drain pipes for Split AC machine up to 4 TR capacity

[221] Supply and Erecting of Static Stabilizer suitable for following 8.00 Each 3030.00

capacity of A.C Machine the Stabilizer Must have Minimum

Technical Specification are Input working Single Phase Voltage

Range Up to 150V-280V.50Hz, Output Voltage Range Up to 200V-

240V,50Hz,Autoreset Facility,LED Display for Indicating

Voltage,Spike/Surge Protection,Time Delay Facility,Proper Wall

Mount Facility with Required Accessries & on site 3 year

Replacement/Repairing Warranty.

(1) For 1.5Ton Thermal Overload Protection 12 Amp.

[222] Supplying and erecting horizontal / vertical mounting type storage 5.00 Each 9513.19

water heater with copper container housed in M.S./S.S./ABS body

insulated with glass wool/puff complete with heating

elements,adjustable thermostats 300C to 850C, indicating lamp,

safety valve, fusible plug, etc.complete erected with coach bolts,

nuts. washers & cementation.(B)15 Ltr-.with 2 /3K.W. heating

element.Premium Category.

[223] Providing & erecting open well type horizontal mono block pump 1.00 Each 9613.18

set with stainless steel body having following specification.(C)

H.P. single phase open well motor pump set suitable for 185 LPM

discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe

with control panel.Cat.II

[224] Supplying & erecting approved make 3 phase motor control 1.00 Each 12993.65

cubical panel ( Star - Delta) made from16 G. CRCA sheet duly

painted with epoxy powder painted inside and outside with

hinged doors and locking arrangement, consisting of suitable size

of ON- OFF isolator (AC - 3/23 duty) main fuses, single phasing

preventer cum water level. Guard (Complete unit), Toggle switch

to by pass Single phase preventer cum WLG, indicating lamps for

R- Y- B phases, over load relay, Automatic water level controller,

Ammeter & Voltmeter each with two way selector switch

incoming wires duly socket Crimped, Panel to be erected on

angle iron frame grouted on wall as directed. Star Delta & main

contactor, overload relay, thermal / Electronic Star delta cutoff

timer, start - stop push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer make only. Panel to

be erected on angle iron frame ground on wall.(A)S/D up to

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[225] S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or 1.00 Each 35590.38

more having three phase motor capacity not more than 7.5 H.P.

with following capacity . Lifting and Lowering taken extra.(A) (12

stage) 280 to 240 LPM discharge at 90 to 104 mtrs. head

respectively suitable for 50mm dia. delivery pipe.Cat.III

[226] Lowering of submersible motor pump set at the depth of 1.00 Job 856.48

following ,complete with required. Nos. and size of casing pipes

erected by means of proper chain pulley block & pipe wrenches

after checking of threads of each pipe with coupling to take the

load of the pump set and pipe assembly filled up with

water.(d)For Open well Horizontal submersible pump set for sump

well. (i) 1 HP to 5 HP

[227] Lowering of submersible motor pump set at the depth of 1.00 Job 2568.43

following ,complete with required. Nos. and size of casing pipes

erected by means of proper chain pulley block & pipe wrenches

after checking of threads of each pipe with coupling to take the

load of the pump set and pipe assembly filled up with

water.(B)Above 60 mtrs. and Up to 120 mtrs. .

[228] Providing and erecting ISI marked PVC insulated PVC Sheathed 25.00 Rmt 146.45

Flat flexible Submersible copper cable approved make of

following Size.(C) 3 Core x 4 Sq. mm.

[229] Providing and erecting ISI marked PVC insulated PVC Sheathed 120.00 Rmt 172.71

Flat flexible Submersible copper cable approved make of

following Size.(D) 3 Core x 6 Sq. mm.

[230] Providing Water proof straight Joint in PVC insulated flat flexible 3.00 Each 189.88

copper cable by using insulating material, water proofing material,

& making the joint complete. (A) Up to 10Sq. mm

[231] Supplying of following size of HEAVY UPVC column pipe with 80.00 Rmt 493.89

coupler and wire lock.[C] 65 mm dia.

[232] Supply of following size of TOP & BOTTOM accessories i.e. 1.00 Per set 1900.82

Adaptor set (CI) long, pump guard set, starter pipe Rubber ring for

submersible pump & UPVC column pipe as directed by Engineer -

in - charge with necessary plumbing as desired.[E] 65 mm dia

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[233] Supplying and erecting, commissioning and testing of Diesel 1.00 Each 675844.53

Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply

comprising of a totally enclosed air/water cooled diesel engine

with multi-cylinders developing suitable BHP not less than

following capacity at 1500 RPM with 10% overload for one hour in

24 hours with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and lubricating

oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners,

screw drivers, cylinder head to cover, joint cylinder head to

exhaust, element lube oil filter, 12 / 24 volts electric starting

equipment complete with standard heavy duty battery, dynamo,

cut-outs, ammeter, necessary wiring, pressure gauge, starter etc

and heavy duty Residential type exhaust silencer (With DEF

System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of

required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self

regulated, screen protected, with excitation system, capable of

delivering the rated system output at 415 volts, 3 phase, 0.8 PF,

Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with

voltage regulation +/- 5% of rated voltage from no load to full

load. Both the engine and alternator fitted on a common

fabricated steel base plate with antivibration mounting engine

and alternator both connected to each other by flexible flange

coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB /

MCCB / MCB of adequate capacity, indicator lamps duly wired

with HRC fuses. The alternator & control panel shall be connected

with provided suitable capacity armoured cable and complete

with Acoustic enclosure (canopy) made out of 16 SWG CRCA

Sheet, sound absorbing material Rockwool of 64 density &

mm thick conforming to IS:8183 / PU Foam of 40 Density - at least

40 mm. The resin bonded rockwool covered from inside the

canopy by perforated sheet with 3/4 mm holes, sound level not

more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set

should have in built fuel tank capacity of minimum 8 hrs of

continous running capacity on full load .

Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel (minimum up to the 80% of

fuel tank capacity), oil, etc. with guarantee / Warrantee of

complete system for Two years. & with obtaining all necessary

certificate from Electrical Inspector. The Capacity and Ratings of

DG sets are as below. (As per new CPCB4+ Emission norms

Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS

(Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR

(Selective Catalytic Reduction), Integrated wiring harness

connected to ECU .) (I) Continuous Rating of 62.5 KVA ,BHP not

less than 76 BHP

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[234] Providing & erecting approved make AMF control panel suitable 1.00 Each 97320.57

for following size of 3 phase, 415 V., 50 cycles, A.C. diesel

generating set complete of scope as detailed below:1) Power

module: A pair of electromechanically interlocked contactors (for

mains & generator) Overload relay for generator contactor

Neutral contactor for mains and generator Power socket for

connections 2) Control and metering module: Line voltage

monitor. Generator voltage monitor Ammeter 3 items attempt

start facility. Air circuit reakers/MCB/MCCB of suitable rating for

auto/manual operation. Auto/manual switch. Emergency stop

push buttons. Manual start push button. frequency meter. Engine

hour meter. Two earthing studs.3) Protection module: The engine

shutdown in the unlikely event of Low lube oil pressure High

cylinder head temperature. V belt failure.4) Indicators with alarm

Load on generator.5) Indicators Load on mains Engine fails to start

. Emergency stop battery charger.The AMF Panel of following

capacity(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set.

Two Crore Eighteen Lakh Twenty Four Thousand Eight Hundred Sixty Rupees and Fourty Nine Paisa Only

I/We am/are willing to carry out the work at…………………………………………….% above/below percent (Should be written in figures and words)

of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct…………………………% below Add…………………………% Above

In Worlds In Worlds

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Credit of dismantled materials of amount of Rs. 0.00/- must be recovered from contractor's 1st R.A. bill.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be

included in the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

Dated Signature of Dy. Executive Engineer Executive Engineer

the Contractor. R & B Sub Division R & B Division