Palakkad division-Provision of new standard height gauge at Limited Use Subways/ Road under bridges (16 nos).

Vol.I & Vol .II ) except reinforcement steel

Item- 01 Provision of ht gauge

S No. Item Description of Item Unit Qty Rate Amount

13.0 FINISHING

13.44S EXTERIOR FINISHING

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

Schedule C-List of Items of Works covered by the SRUSSOR - 2021 for TVC & PGT Division except

Schedule Cement & Reinforcement steel for which tenderer has to quote percentage rate over, below or at

par to the SRUSSOR 2021 rate.

Item- 01 Provision of ht gauge

S No. Item Description of Item Unit Qty Rate Amount

Earthwork in excavation by mechanical means

(Hydraulic Excavator)/Manual Means for

foundations and floors of the bridges, retaining

walls etc. including setting out, dressing of

sides, ramming of bottom, getting out the

excavated material, back filling in layers with

approved material and consolidation of the

layers by ramming and watering etc. including

all lift, disposal of surplus soil up to a lead of

300m, all types of shoring and strutting with all

labour and material complete as per drawing

and technical specification as directed by

Engineer in charge. Note: This item will be used

for excavation work in connection with other

miscellaneous works also like side drains,

foundation for OHE masts and other

miscellaneous structures in connection with

Gauge Conversion, Doubling, New lines.

PALAKKAD DIVISION-ENGINEERING/SOUTHERN RLY

2 022040 Providing and laying in position machine cum 188.00 4994.99 939058.12

batched, machine mixed and machine vibrated

Cement Concrete of specified grade as per

approved Design Mix (mixed in Mobile Concrete

Batching/Mixing Plant at site or RMC from

approved plants) using 20mm graded crushed

stone aggregate and coarse sand of approved

quality in RCC raft foundation & Pile cap

including finishing, using Plasticiser in approved

proportions (as per IS:9103), to modify

workability without impairing strength and

durability complete as per specifications and

direction of the Engineer in charge. Note: 1.

Payment for cement, reinforcement and

shuttering shall be made extra under relevant

item. 2. Plasticiser shall invariably be used in

approved proportion to increase workability

with minimum possible quantity of cement for

all grade of Design Mix Concrete unless it is

specifically approved citing reasons for not

using plasticiser at the stage of Mix Design and

in that case deduction shall be made as per

3 022060 Providing and laying Plain Cement Concrete cum 32.00 5190.51 166096.32

1:3:6 with graded stone aggregate of 40mm

nominal size, in foundation and floors, retaining

walls of bridges including mechanical mixing,

vibrating, pumping and bailing out water where

ever required with all materials and labour

complete but excluding the cost of cement and

shuttering as per drawings and technical

specifications as directed by Engineer.

Centering and shuttering including strutting,

propping etc. and removal of form for :

4 025031 All types of bridge sub-structures, e.g. pier, Sqm 735.00 853.04 626984.40

abutment, wing wall, retaining wall, RCC box

type foundations, Abutment cap, Pier Cap,

Inspection Platform & Pedestal over Pier cap,

Fender wall, Diaphragm wall etc. up to 5m

above ground level

Providing and fixing various size HTS holding

down bolts conforming to relevant

Codes/Specification in concrete column or in

other structures with proper nuts, bolts,

washers/plates, grouting of holes with cement

or epoxy concrete with all material, labour, T&P

as a complete job.

5 041071 With Cement Grout. Cost of cement shall be Kg 4064.00 172.77 702137.28

6 041370 Supplying fabricating and erecting welded MT 92.00 140659.15 12940641.80

and/or bolted and/or riveted steel work in built

up sections, trusses and framed work, staging,

racks, Height Gauge etc. for Steel Structures

other than bridge girders, using RSJ, tees,

angles and channels/flats, plates, gussets,

round or square bars, cleats, bolts etc., with

contractors own steel including cutting,

bending, straightening, drilling, riveting,

hoisting, fixing, erecting, welding, bolting etc.,

with Providing stiffeners wherever required as

per approved drawing including applying a

priming coat of a approved steel primer with all

contractor's materials, labour, tools & plants,

lead & lift including crossing of tracks if

required etc., complete as per specification and

as directed by Engineer-in-charge. Note: The

payment shall be made on the theoretical

weight of main components and gusset plates

PALAKKAD DIVISION-ENGINEERING/SOUTHERN RLY

7 181030 Dismantling exiting Rail Height Gauge carefully Each 26.00 4365.86 113512.36

and stacking the released material in countable

m a n n e r , free from any infringements as

directed by Engineer in-Charge including

removal of cement concrete foundation and

making surface clean.