Construction of Anganwadi Building at Kumaramangalam Panchayat

Amount

Name of the Work : Construction of Anganwadi Building at Kumaramangalam Panchayat

Earthwork excavation for foundation in all claues of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc., complete complying with standard specification

Supplying and Sand Filling from Approved Sources including cost and Conveyance of all materials etc., Complete

Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification

Brick Work cm 1:5 mix (One Cement anf Five Sand) using Country bricks ground maded of size 23x11x7 cm including curing, finishing and cost & Conveyance of all materials etc.,

Supplying and Filling of conveyed earth with a lead of 5Km for basement filling including all materials to site and all labour charges etc.,

Supplying and erecting centering for sided centering for soffits of RCC Slabs of plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S. angles of size 25mm X 25mm

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wirw also in all floors etc., complete

RCC 1:1/2:3 mix using 20mm ISS HBG metal for RCC items of work excluding items of works excluding centering, shuttering and cost of reinforcement grill, out including curing etc., complete and also including fixing fan clamps and mixtures in RCC works.

Plastering with cm 1:5 mix(One Cement and five Sand) to 12mm thick including cost and conveyance of all materials in all floors etc., as directed by departmental officers etc.,

Plastering surfaces of RCC items such as slabs, beams, sunshadeds with cement mortar 1:3-10mm thick including packing, providing cement mortar beading for sunshades staircase, steps, lands slabs etc., as directed by departmental officers etc.,

Supplying and fixing PVC rain water down fall pipe of 110mm dia with necessary Shoes, bends ^ Clamps etc.,

Providing Weathering Course with best quality of brick Jelly 20mm gauge in pure slaked lime(No sand to be added) over roof slab, the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thicknes

Finishing top roof mix one course machine pressed tiles of size 20cmx20cmx2cm approved quality with CM.1:3 12mm thick mixed with WPC at 12% by weight of cement used and top pointed with the same mortal etc.,

Supplying and fixing of cudappah slab 50mm including cost and conveyance and all labour charges etc., complete

Supplying and fixing in position Baby Pan, white glazed earthern ware of approved quality with 'P' trap or 'S trap confirming to IS:2556-part XII with sand cushion and forming the closet using 40mm broken brick jelly in lim

Supplying and fixing position ordinary colour galzed Eropean water Closet of best quality and approved make with 100mm "p" or "S" trap with double flapped rigit PVC seat Level flushing tank with 10 litres PVC low lwvwl Flushing tank with all internal fittings etc., complete complying with standard specification

Providing granolethic floor finish in cEment Concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc., complete

Supplying and paving the floor with vetrified tiles 0.60mx0.60mx0.08m for approved quality cost and conveyance of all materials to site and all labour charges etc.,

Paving the flooring with special type of flooring tiles (Cement based Hydraulically Pressed Anti Skid tiles (20mm thick) in CM 1:3, 20mm thick including cost and conveyance of all materials to site and all labour charges etc.,

Dadooing of walls with colou galzed tiles of size 300x200x6mm of best quality including cost and conveyance of all materials to site and all labour charges etc.,

Distembering two coats of oil bound distember using one coat of primer coat including cost & Conveyance to size and all labour charges etc., complete

Painting two coats with ready mixed Exterior Emulsion paint of approved quality and colour over a priming coat, including through scrapping, clean removel of dirt etc., complete

Painting two Coats of new iron work with best quality synthetic enamel paint of approved quality and colour with primimg coat including the cost of all materials etc., in all floors

Fabricating supply and fixing and Position of MS door with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6mm, MS angle intermediate stiffner will be 35x35x6mm with cross stiffner 25x25x5mm flats covered. door 1.00m X 2.10m

Fabricating supply and fixing and Position of MS Windows with two leave. The Window outer frame will be35x35x6mm MS angle, the shutter frame will be 25x25x6mm, MS angle intermediate stiffener will be 25x25x6 with cross stiffner 25x25x6mm with cross stiffner 25x25x5mm flats covered Window size 1.20m x 1.30m

Ventilator 0.90m x 0.45m

Supplying and fixing Following Electrical Arrangements

Wiring with 2x1.5 sq.mm(22/0.3) PVC insulated SC, Unsheathed Cu. Conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/fan point. SD 17

Supply and fixing tube light fittings and all labour charges etc complete (SD 87)

Supply and fixing CFL bulb and all labour charges (SD 83)

Supply and fixing of PVC PLUG POINT and all labour charges etc Complete (SD 39)

Supply and Fixing of single type dtreet light Flu. Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheated copper leads from terminals to the fittings for Street light (SD 94)

Supply and runoff 2*1.5mm2 PVC insulated SC unsheathed Cu. Conductor of 1100V garde in 25mm dia GI pipe (Class B) suitably bent at both end with necessary angle iron upright and end support for mains

Supply and runoff 2 of 6 mm2 (84/0.3) OVC insulated SC unsheathed Cu.conductor of 1100v on 7/20 GI bearer wire for service connection main SD 64

Supplying and fixing of 16AMS DPI Switch of 500 volt with fuse and Neutral (Side handle) on suitable TW/PWD Earthing SD135 Service main

Supplying and fixing of 1200mm (40") AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp SD106

Supplying and fixing of Excauste fan with stepped electronic 300W regulator with 1m down rod on the existing clamp

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Sivakumar