Specification No.42/2019-20

Amount

Earth work excavation in hard gravelly soil with an initial lead of 10 m and lift of 2 m etc.for foundation

A) In hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders.

B) In SDR ( Not requiring blasting) , laterite, soft rock or kankar.

Supply and filling the basement with M sand for foundation and basement including watering consolidation etc., complete.

Supply and filling the basement with gravel for foundation and basement including watering consolidation etc., complete.

PCC 1:4:8 using 40m HB stone for foundation including cost of all materials and labour etc., complete.

RCC 1:1.5:3 using 12- 20mm HB stone with form work for footing concrete including cost of cement, all materials lead and lifts etc., complete.

RCC 1:1.5:3 using 20mm HB stone with form work for RCC column portions including cost of cement, all materials lead and lifts etc., complete

RCC 1:1.5:3 using 20mm HB stone with form work for grade beam and plinth beam including cost of cement, all materials lead and lifts etc., complete

Brick Work in Cement mortar 1:6 using chamber burnt bricks of standard size including cost of all materials,labour lead ,lift etc complete

a) Substructure

b) Superstructure

RCC 1:1.5:3 using 20mm HB stone with form work for lintels, lofts and sunshade including cost of cement, all materials lead and lifts etc., complete

RCC 1:1.5:3 using 20mm HB stone with form work for roof concrete including cost of cement, all materials lead and lifts etc., complete

RCC 1:2:4 using 20mm HB stone without form work for plinth protection including cost of cement, all materials lead and lifts etc., complete

Providing steel reinforcements for RCC works including cost of steel, binding wire and labour for cutting bending tying and placing in position etc., complete.

Transporting of excavated soil away from the site to the local dumping yard approved by local panchayat authorities including loading, unloading charges etc., complete.

Providing anti-termite treatment as per standard specifications alround the building including all materials, labour, lead, lift etc., complete.

Damp proof course with CM 1:4,12 mm thick at basement level with best approved waterproofing compound including cost of all materials,lead,lift etc complete.

Supplying and fixing ornamental grills using MS flats of required size as instructed by the Engineer at site including painting two coats of enamel painting over one coat of primer etc complete.

Fabrication,Supply & Fixing of steel framed single leaf door using required angles for door frame, and shutters with suitable panels as instructed by the Engineer at site including cost of all materials, labour, lead, lift etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side pre laminated MDF board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings average anatic film thickness of 15 microns etc., complete. (With automatic door closure and hinges)

Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Two track sliding window with Aluminium sections with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labour, etc., for an average anodic film thickness 15 microns etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish fixed glazing of Aluminium partition with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised powder coating of required colour prelaminated board of Aluminium partition of size 2.70m x2.10 m with required rubber beading etc, including necessary dismantling holes in RCC column, masonry wherever in necessary as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns etc., complete.

Supplying and fixing of N type Glazes ventilator with outer steel frame using required angles including cost of all materials labour,lead,lift etc complete.

Supplying and fixing of PVC panelled door shutters including cost of necessary hinges and other furniture fittings, cost of all labour, lead, lift etc., complete.

Plastering the walls with CM 1:5, 12mm thick including cost of all materials,labour,lead,lift etc complete.

Ceiling Plastering with CM 1:3, 15mm thick including cost of all materials,labour,lead,lift etc complete.

Flooring with approved vitrified of non slippery type tiles over cement mortor 1:3 20mm thick including pointing with white cement and finishing the joints flush pointing the surface etc ., complete.

Flooring with good quality ceramic tiles/Non slippery tiles of size 305 mmx 305 mmx 6mm laid over 20mm thick CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,

Dadooing walls with printed design colour glazed tiles of size 300 x 200 x 6 mm laid in cement mortar 1 : 2 , 10 mm thick and pointing with white cement using 0.4 Kg / m2 including finishing the joint and pointing flush with tiles surface etc., complete.

Providing weathering course with one course of pressed tiles of size 23x23x2cm. Embeded in CM 1:3 12mm thick & pointed with same mortor mixed with crude oil 10% weight of cement used over a bed of brickjelly, lime concrete of 80mm thick with ratio of 32:12.5 cft, (no sand) with the required slope and beaten with wooden beaters including cost of all materials, curing, etc., complete.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as brackets, waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixing of PVC / Fiber glass framed 5.5 mm thick mirror of size 600 mm x 450 mm including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixing of PVC down fall pipe of 110 mm dia, 4 kg / cm2 with necessary, leads, lift etc complete.

Supplying, fixing and laying of PVC pipe 10 Kg/cm2 for water supply arrangement including cost of all materials, labour, lead, lift etc complete.

a) 40mm PVC pipes

b) 32mm PVC Pipes

c) 20mm PVC Pipes

Supplying, fixing and laying of 110 mm dia PVC pipe 6 Kg/cm2 for sanitary arrangements including cost of all materials labour lead,lift etc complete.

Supplying and fixing of PVC screw down tap including cost of all materials, labour lead, lift, etc., complete.

Supply & fixing of GM gate valve including cost of all materials, all labour, lead, lift etc., complete.

Supplying & fixing of PVC water tank of 500 litres capacity of reputed make as per the instructon of Engineer-in-charge including cost of tank, transport and fixing charges etc., complete.

Supplying and fixing of 20mm tk cudappa slab for cupboard and shelves including cost of all materials, labour for fixing etc., complete

Providing manhole of the following sizes including cost of EWE, Sand filling, PCC , Brick work, plastering and providing with suitable CI Manhole cover etc., complete.

450x450 mm size

300 x 300 mm size

Providing projected border of required size including cost of all materilas, labour, lead, lift etc., complete.

Supply and fixing of 75mm dia 4 Kg per sq.cm PVC ventilating shaft inclinding cost of all materials lead lift etc complete.

Supplying and fixing with 40mm HB stone inside the dispersion trench including cost of all materils lead lift etc complete.

White washing two coats with white cement including cost of all materials,labour lead,lift etc complete

Exterior painting with two coats of approved Plastic emulsion over one coat of white cement primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Interior painting with two coats with approved quality distember including cost of all materials,lead,lift etc complete.

Providing Rainwater Soak pit with approved good quality with 5 Nos. RCC Well Rings of size 4' outer dia and 1' height with approved quality RCC circular cover slab of size 4' dia and 3" thickness, using 40mm HB stone as filter, including cost of all materials, lead, lift, labour, etc,.complete as directed by the engineer at site.

Wiring with 2x1.5sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC wire for open PVC light point/ Fan point.

a) Light Points

b) Fan point

Wiring with 2x1.5 sq mm PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW Switch box for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Wiring with 2 x 4 sq mm PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3 mm thick hylem sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.

Supplying and Fixing of Single box type 4’ 40W flu. Fitting complete with electronic choke and condenser with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing of 1200 mm (48”) AC ceiling fan complete with stepped electronic 300W regulator with 300 mm down rod on the existing clamp.

Supply and fixing of TNEB meter Board suitable for 3 Phase 63 A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6 mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63 A fuse units(500V), Neutral links,copper earth flat of size 1"x1/4" with inter connection of EB meter to fuse unit by 7/16 PVC insulated copper wire with earth connection complete.

Supply and run of 4 of 4 Sqmm(56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains.

Supply and run of 4 of 4 Sqmm(56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V Grade in 25mm dia GI pipe(Class B) bent at both ends with necessary angle iron up right and end supports for mains.

Supply and fixing of WT bulk head fitting with guard suitable for 60W bulb.

Earthing as per PWD standard with an earth electrode of 2m, class B GI pipe of dia. not less than 32mm complete with necessary masonry work.

PERUMAL.S.K