Raising Machine hole using diamond cut method on various main roads in Isanpur Ward South Zone

19 2.00 Providing and laying cement concrete work 1:2:4 (1-Cement:2- 3,093.30 Cmt

Coarsesand:4-graded stone aggregates 20mm nominal size) and

curing complete excluding cost of formwork and rein for cement

for reinforced concrete work in (A)Foundations,footings,Base or

columns and Mass concrete (upto 10 ton) (Based on Building

SOR 2021-22) It.NO.05010AA, Pg.No.74

20 100.00 Barricading the entire break down or excavated area on rental 79.99 Rmt

basis using wooden ballies / M.S.angles at max. 2.00 meter

centre to centre, C.G.I. Sheet, reflective paint / Board out side to

avoid accident & for smooth traffic diversion & movement

including cautionary board etc. Item also includes for making

temporary sufficient nos of lighting arrangement through out the

work with necessary required arrangement. ..The same shall be

removed after completion of work. (Only for break down work

from start to complete) (AMC Drainage SOR-Jan-2016)

21 15.00 Providing and operation dewatering Pump including fuel charges 535.71 Shift

& operator Charges etc. as directed etc. comp. (Shift for Eight

Hour) (For Each Pump Set, No payment should be allowed for

non working condition of machinery) (Based on Previously

approved rate by C E sir ) (AMC Drainage SOR-Jan-2016)

22 300.00 Dewatering by pumping set of required capacity including 18.32 H.P/Hr

temporary platform, carting pumping at site and fixing the same

in position including all accessories and fuel and labour

etc.complete (GWSSB SOR 2022-23) Part-2 E (Misc) It.No.1,

23 3.00 Hiring and operating the 20 KV 3 Phase Electric Generator for 2,500.00 Shift

operating desilting machinery, and lighting and other

requirements with Arranging diesel to run the D.G. Set Do As

Directed. 8 Hrs Shift. (No payment should be allowed for non

working condition of machinery ) (Based on Previously approved

rate by C E sir ) (AMC Drainage SOR-Jan-2016)

24 5.00 Providing & Supplying JCB Machine on rental basis in case of 535.71 Hour

emergency situation and break down type work & also during

unavoidable condition as per instruction of engg.incharge, rate

includes all nece. shifting, fuel and operating charges and

stacking of useful & non-useful materials separately up to store.

(No payment should be allowed for non working condition of

machinery and for pipe line excavation and laying work)

(Based on Previously approved rate by CE sir ) (AMC Drainage

25 5.00 Supplying electric breaker machine for RCC slab or asphalt 1,071.42 Shift

demolishing work on site by using operator, fuel, power supply

etc.complete as directed. (no payment should be allowed for non

working condition of machinery and for pipe line excavation and

M.H. work. Allowed only for break down work) (Based on

Previously approved rate by CE sir ) (AMC Drainage SOR-Jan-

26 5.00 Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt 535.71 Hr

Demolishing Work on site by using Operator, fuel, power Supply

etc. Complete as Directed. (No payment should be allowed for

non working condition of machinery and for pipe line excavation

and M.H. work. Allowed only for break down work) (Based on

Previously approved rate by C E sir ) (AMC Drainage SOR-Jan-

27 3.00 Hiring of tractor with trolley considering 8 Hrs. as working day 2,104.09 Day

hours incl.Driver (GWSSB SOR 2022-23) Part-2 E (Misc) It.No.7,

28 2.00 Levelling or orientation of existing gully trap chamber incl. Nece. 71.42 No.

masonry in CM 1:6 and plaster in CM 1:3 etc. using old G.T.stone

and cover etc. comp. (AMC Drainage SOR-Jan-2016)

29 10.00 Constructing Bombay Pattern Type Catch Pit of size 0.60 x 0.60 3,125.00 No.

depth up to 1 mt including excavation, B.B.C.C. (1:5:10), 23 cms

thick brick maso. wall in the prop. of CM (1:6) with 40 mm thick

IPS flooring in the prop M15 at bottom and 15 mm thick cement

plaster inside the catch pit in the proportion of CM (1:3) with out

jali etc. comp. as directed. (As per R.A. Based on Building SOR

2015-16) (AMC Drainage SOR-Jan-2016)

30 Demolition incl. stacking of serviceable materials & disposal of -

unserviceable materials with all lead and lift.

5.00 (b) Brick work in cement mortar (20.11,page 217) (R & B SOR 324.37 Cmt

5.00 (c) Dismentaling tiled of stone floors laid in mortar including 28.12 Smt

stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (20.11,page 217) (R & B SOR

31 Providing F.R.C. MH seat cover incl. carting to the work site etc. -

comp. Directed.(Based On Rate Of Central Store Circular

a 2.00 (SET cover and frame) F.R.C. Extra Heavy Duty [EHD-35] 2,843.00 Set

Machinehole Covers & Frame- 560mm ø clear opening, The

dimension of frame and cover as per mentioned in Amend No.1

to IS 12592 : 2002 table

a1 2.00 ( Only Cover ) F.R.C. Extra Heavy Duty [EHD-35] Machinehole 1,500.00 No.

Covers & Frame- 560mm ø clear opening, The dimension of

frame and cover as per mentioned in Amend No.1 to IS 12592 :

a2 2.00 (Only Frame ) F.R.C. Extra Heavy Duty [EHD-35] Machinehole 1,492.00 No.

Covers & Frame- 560mm ø clear opening, The dimension of

frame and cover as per mentioned in Amend No.1 to IS 12592 :

b 1.00 (SET cover and frame) F.R.C. Heavy Duty [HD-20] Machinehole 2,759.00 Set

Covers & Frames- 560mm ø clear opening, The dimension of

frame and cover as per mentioned in Amend No.1 to IS 12592 :

b1 1.00 (Only Cover) F.R.C. Heavy Duty [HD-20] Machinehole Covers & 1,458.00 No.

Frames- 560mm ø clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 : 2002 table

b2 1.00 (Only Frame ) F.R.C. Heavy Duty [HD- 20] Machinehole Covers & 1,450.00 No.

Frames- 560mm ø clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 : 2002 table

c 1.00 (SET cover and frame) F.R.C. Medium Duty [MD-10] 1,996.00 Set

Machinehole Covers & Frames- 560mm ø clear opening, The

dimension of frame and cover as per mentioned in Amend No.1

to IS 12592 : 2002 table 1 (SET cover and frame)

c1 1.00 (Only Cover ) F.R.C. Medium Duty [MD- 10] Machinehole Covers 1,064.00 No.

& Frames- 560mm ø clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 : 2002 table

c2 1.00 (Only Frame ) F.R.C. Medium Duty [MD- 10] Machinehole 1,021.00 No.

Covers & Frames- 560mm ø clear opening, The dimension of

frame and cover as per mentioned in Amend No.1 to IS 12592 :

d 1.00 (SET cover and frame) F.R.C. Medium Duty [MD-10] Chamber 1,911.00 Set

Covers & Frame- 600 x 450 mm clear opening, The dimension of

frame and cover as per mentioned in Amend No.1 to IS 12592 :

d1 1.00 (Only Cover ) F.R.C. Medium Duty [MD- 10] Chamber Covers & 1,021.00 No.

Frame- 600 x 450 mm clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 : 2002 table

d2 1.00 (Only Frame ) F.R.C. Medium Duty [MD- 10] Chamber Covers & 1,013.00 No.

Frame- 600 x 450 mm clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 : 2002 table

e 1.00 (SET cover and frame) F.R.C. Light Duty [LD-2.5] Chamber Cover 1,631.00 Set

& Frame - 600 x 450mm clear opening,The dimension of frame

and cover as per mentioned in Amend No.1 to IS 12592 :

e1 1.00 (Only Cover ) F.R.C. Light Duty [LD-2.5] Chamber Cover & Frame 847.00 No.

- 600 x 450mm clear opening,The dimension of frame and cover

as per mentioned in Amend No.1 to IS 12592 : 2002 table

e2 1.00 (Only Frame ) F.R.C. Light Duty [LD-2.5] Chamber Cover & Frame 839.00 No.

- 600 x 450mm clear opening,The dimension of frame and cover

as per mentioned in Amend No.1 to IS 12592 : 2002 table

32 1.00 Set F.R.C. Strom Water Grating Grating(Jali): 740 x 740 x 90mm 2,127.00 Set

square jali, 10:00 MT load design, 90x2mm MS flat allround,

Frame: 600 x 600mm clear opening, outer size- 900 x 900 x

mm. On the upper periphery of frame 25 x 3mm wide MS flat

should be well embded in concrete to protect the edges of frame

(Based on Central Store Rate)

33 190.00 Labour charge of Cutting in bituminous pavement Cutting to be 125.00 Rmt

done with heavy duty tandom cutting machine consist of

diamond blade. Minimum cutting depth shall be 75mm from the

finished level. Cutting shall be perfecty in line. The width and

depth of the removal of asphalt towards kerb stone shall be as

per the drawing. Bitumen shall be carefully removed so that the

the cutting edge towards the road should no be disturbed. The

work of removal of the asphalt will be considered in this item as

running meter of the cutting done by achine. One cutting line will

be considered per length of the kerb stone

Contractor’s Quoted Rate: -

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Addl. City Engineer

Date: (South Zone)