Routine Maintenance of Niljipatra to RD road from ch.0.000 to 1.450 km for the year 2026-27

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area etc. complete as per direction of the Engineer in charge.

Cleaning the existing black topped surface with removal of foreign materials with brooms soft brushes and finaly dusting with old gunny bags or compressed air to receive bituminous treatment as per direction of EIC.

Providing and laying moorum on shoulder / Berm including all cost and conveyance of all materials and labour charges etc complete for finished item of work as per the direction of EIC.

White washing two coats on parapet walls and tree trunks including cost of white washing and preparation of surface by cleaning scrapping etc; complete as per specification and direction of the Engineer-in-charge.

Providing Rainforced Cement Concrete of (1:2.5:5) with 20mm to 40mm size stone aggregate in foundations upto a depth of 1.5m below ground level and upto a height of 1.5m above ground level / bed level including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C .Km Stone

Providing Rainforced Cement Concrete of (1:2.5:5) with 20mm to 40mm size stone aggregate in foundations upto a depth of 1.5m below ground level and upto a height of 1.5m above ground level / bed level including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C. 200 m Stone

Providing and apppying tack coat with bitumen Emulsion using emulsion pressure distributer at the rate of 0.30kg per sqm on the prepared bituminous/granular surface etc complete

Providing, laying, scraping, cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm and laying 75mm thick built up spray grouting in one layers 37.5mm thick each layer using 0.45cum of 25mm to 40mm size hard granite metal and 12.00Kg penetration grade of bitumen for 10 Sqm in each layer with 0.12cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries including cost and conveyance of bitumen, metal and chips complete as per specification and direction of Engineer-in-Charge

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision)