Construction of Assistant Engineer Office Cum Residence at Bir HPPWD Bir Under Division Baijnath

Amount

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeters) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Excavation in drains and channels etc. in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in all floor level including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors all level and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed/broken stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed/broken stone aggregate 40mm (fourty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated plain cement concrete work grade M-20 with cement contents and not less than 320 Kg/m3 (three hundred twenty) kilograme per cubic meters and curring complete. Excluding the cost of form work in foundation and plinth including entire carriage of material with all lead and lifts and other incidental as per specification, approved drawings design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. from foundation upto all floor level and curing complete including entire carriage of material within all leads, lifts and other incidental as per specification, approved drawing, design and as directed by Engineer-in-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level and curing complete including carriage of material within all leads, lifts and other incidental as per approved drawing, specification, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:5 (one cement isto five sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per the direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level and curing complete including carriage of material within all leads, lifts and other incidental as per approved drawing, specification, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts upto floor all level and curing complete as per specification, approved drawing, desing, including carriage of material within all leads, lifts and other incidental and as directed by Engineer-in-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compreasive strength of M-20 N/mm2 with cement contents not less than of 330kg/m3 (three hundred thirty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, basis of columns and the like mass concrete in all depth / thickness upto all floor level and curing complete including entire carriage of material within all leads, lifts and other incidental as per approved specificatioin, drawing, design as per direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compreasive strength of M-20 N/mm2 with cement contents not less than of 330kg/m3 (three hundred thirty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, basis of columns and the like mass concrete in all depth / thickness upto all floor level and curing complete including entire carriage of material within all leads, lifts and other incidental as per approved specificatioin, drawing, design as per direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto all floor level and curing complete including carriage of material within all leads, lifts and other incidental as per approved specification, drawing design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320 Kg/m3 (three hundred twenty kilogramme per cubic metre) mechanically mixed and vivrated and curring complete for reinforced cement concrete in chajjas for all thickness in all floor level up to all heights including finishing the exposed surface with cement motor 1:3 (one cement is to three sand) to give a smooth and even surface including centiring, form work but excluding the cost of reinforcement. As per specification, approved drawing, desing including entire carriage of material with in all lead and lift and other incidential as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in String courses, copings, bed plates, anchor blocks, plain windows sills and the like and curing complete including carriage of material within all leads, lifts and other incidental as per approved specification, drawing design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing tor steel of Sail, Tisco reinforcement for reinforced cement concrete work including bending, binding cutting strengthening including placing in position complete, cost of binding wire up to floor all level as per specification, approved drawing, design as per entire satisfaction of Engineer-In-Charge including carriage of material with all lead and lift and other incidental. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying damp proof course 38mm (thirty eight milimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four aggregate) graded crushed/broken stone aggregate 12.5mm (tewelve decimal five milimeter) nominal size mechanically mixed and curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) or equivalent using 1.70 kg (one decimal seven zero) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in foundation and plinth and curring complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure up to any floor level and curring complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Second class half brick work using common burnt clay building bricks in cement mortar 1:4 (one cement isto four sand) with hoop iron in super structure up to any floor level and curing complete including carriage of material with in all lead, lift and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing woodwork in Second class deodar wood in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 40mm (fourty milimeter) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clearstory windows including bright finished black enamelled iron hings with necessary screws as per PWD specification drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 12 mm (tweleve milimeter) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (fourty milimeter) thick frame including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 30mm (thirty milimeter) factory made PVC pannel per door shutter consisting frame made out of M.S. Tube and 19 Gauge (Ninteen gauge) thickness and size of 19x19mm (Ninteen by Ninteen milimeter) for single and 15x15mm (fifteen by fifteen milimeter) for top and botton rails code of 9.120 of Rajshri or to equvalant as per PWD specification drawing and design.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 19mm thick (Ninteen milimeter) thick commericial board water proof shutter of century ply / kit ply / dura ply / Morino ply (ISI marked) with hard wood edging in shelves/box for cup board with butt joints & fixing with nails & screws etc complete as per PWD Specification drawing and design. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 4mm (four milimeter) thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) as per PWD Specification drawing and design. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 12mm thick (tweleve milimeter) water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) as per PWD Specification drawing and design. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm dia (twenty five milimeter diameter) and brackets of first class deodar wood (actuallenght) of rails of be measured complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing plain grills of required pattern in steel frames of windows etc. with M.S. flats, square or round bars with round head bolts and nuts or by screw. plain grill as per PWD specification drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. 300x16mm (Three hundred into sixteen milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. 250x16mm (Two hundred fifty into sixteen milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 250x10mm (Two hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 150x10mm (One hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 150mm (One hundred fifty milimeter) size aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (One hundred milimeter) size aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 75mm (Seventy five milimeter) size aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing bright 250mm (two hundred fifty milimeter) finished hard drawn hooks and eyes. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing bright finished brass fan light pivot with necessary screws etc. complete . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 150mm (One hundred fifty milimeter) M.S. single acting spring hinges bright finished with necessary screws etc. complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing 1mm thick M.S. piano hinges brightfinished with nickel plating flange being 35mm (thirty five milimeter) wide fixing with necessary screws.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing bright finished brass ball catcher 10 mm dia (ten milimeter diameter). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 150mm (One hundred fifty milimeter) M.S. double acting spring hinges bright finished with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (One hundred milimeter) bright finished brass rim latch and lock a pair of knobs with necessary screws etc. complete (indian make of approved quality) as per PWD Specification drawing and design. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (one hundred milimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete (Indian make of approved quality) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 10 mm (ten milimeter) thick antiskid water proof stain and impact resistant heavy duty vetrified tiles (600x600mmx10mm) (six hundred into six hundred into ten milimeter) of Kajaria / Swastik / Somany/Bell Tiles in grey/coloured of required shade in skirting up to all heights on 12mm thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 40mm (fourty milimeter) Kota stone slab flooring over 20 mm (twenty milimeter) (average) thick base of cement mortor 1:4 (one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying spartic ceremic tiles 5.5mm (five point five milimeter)thick in flooring 300 x300 mm (three hundred by three hundred milimeter) size treads of steps laid on a bed of 12mm. (tweleve milimeter)thick cement mortar 1:3(one cement isto three sand) finished with flush pointing in white cement complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 200x300mm / 300x300mm (two hundred into three hundred / three hundred into three hundred) millimeter white glazed tiles 6 mm (Six milimeter) thick in skirting risers of steps and dado up to all heights of Kajaria / Swastik / Somany / Bell on 12 mm (tweleve milimeter) thick with cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry with pigment to match the shade of tiles as required complete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) (three hundred by three hundred by ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (tweleve milimeter)thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying granite stone in flooring 20mm (twenty milimeter)(average)thickness base of cement mortar 1:3(one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm (twenty milimeter) thick as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 0.60 mm (zero point sixty) millimeter thick prepainted steel sheeting of TATA / SAIL Jindal steel in roofing (ISI marked Z120) over steel trussed, pre painted galvanized steel and hot dip metallic zink coat sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron and back coating of polyster 5 micron over 5 micron primer coating including fixing necessary iron J or L hooks, bolt nuts 6mm (six) millimeter dia with prepainted limpat and rubber washers complete with all accessories as per approved speficiation drawing and design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 0.60mm (zero point six zero) millimeter thick pre-painted sheet ridge or hips 60cm (sixty centimetre) of TATA / Sail / Jindal steel roofing with hot dipped metalic zinc coat sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron and back coating of polyster 5 micron over 5 micron primer coating including fixing necessary iron J or L hooks, bolt nuts 6mm (six) millimeter dia with prepainted limpat and rubber washers complete with all accessories as per approved speficiation drawing and design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing pre-painted sheet valleys 90cm (ninety centimetre) over all of kotar metal single skin trapezoidal profiled sheet 0.60 mm (zero point sixty milimetre) thickness sheet in roofing of TATA / Sail / Jindal steel roofing with hot dipped metalic zinc coat sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron and back coating of polyster 5 micron over 5 micron primer coating including fixing necessary iron J or L hooks, bolt nuts 6mm (six) millimeter dia with prepainted limpat and rubber washers complete with all accessories as per approved speficiation drawing and design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 150 mm(one hundred fifty milimeter) wide and 450mm (four hundred fifty millimeters) deep over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.60mm (zero decimal sixty milimeter) thick sheet including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing plaing M.S. B.P. sheet 2.00 cm (two point zero) centimeter thick in evels board/ Facia / Sofit / Ceilling including cutting fixing jointing with /electric welding to steel roofs members and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) rain water pipes of supreme / finolex / princ working pressure not less than 4.5 kg (four decimal five kilogram) per square centimeter including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) rain water pipes of supreme / finolex / princ working pressure not less than 4.5 kg (four decimal five kilogram) per square centimeter including filling the joints with approved adhesive complete 150 mm (one hundred fifty milimeter) dia. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) supreme / pinolex / princ of accessories for rain water pipes including filling the joints with approved adhesive complete 110mm (one hundred ten milimeter) dia PVC plain bend. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110mm (one hundred ten milimeter) dia plain shoes as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) supreme / pinolex / princ of accessories for rain water pipes including filling the joints with approved adhesive complete 150mm (one hundred fifty milimeter) dia PVC plain bend. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm (ten by ten by ten centimeter) of 1:2:4:mix (one cement isto two sand four stone graded stone aggregate 20 mm (twenty milimeter) nominal size) 110mm (one hundred ten milimeter) and cost of cutting holes and making good the wall etc. as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying priming coat over new wood and wood based surfaces with ready mixed paint brushing wood pink primer after and including preparing the surface by throughly cleanin oil, grease, dirt and other foreign sand papering and knotting complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Painting two or more coats (excluding priming costs) on new wood and wood based surfacess with white readymixed paint of asian / nerolac to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Painting two or more coats (excluding priming costs) on new steel and other metal surfaces with enamel paint of asian / nerolac to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

20mm (twenty milimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

15mm (fifteen milimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, in fair side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

15mm (fifteen milimeters) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:3 (one cement isto three sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing plinth protection 50mm (fifty milimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six aggregate) 20mm (twenty milimeters) nominal size cushed/broken stone aggregate including finishing the top surfaces of concrete smooth including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing plinth protection 50mm (fifty milimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six aggregate) 20mm (twenty milimeters) nominal size cushed/broken stone aggregate including finishing the top surfaces of concrete smooth including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x23cms ( fifteen into twenty three centimeters) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement plaster 1:3 (one cement isto three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 ( one cement isto five sand isto ten aggregate) 40mm (forty milimeters) nominal size and 7.5cm (seven decimal five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four aggregate) 20mm (twenty milimeters) nominal size and finished with a floating cost of neat cement complete as per standard drawing and design including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing railing for stair case having balasterof 19 X 19 mm (ninteen by ninteen milimeter) solid square bar with a clear height of 85 cm (eighty five centimeter) and 60 cm c/c (sixty centimeter center to center) embedded in cement concrete steps and welded with electric gas at top alongwith handrail of hollow mild steel rectangular pipe 60x40mm (sixty by forty milimeter) (ISG-16) vertical baluster welded or jointed with each other with two row of mild steel flat 50x5mm (fifty by fifty milimeter) as per HPPWD specifications or as directed by Engineer-in-charge including applying a primer coat of with steel primer .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous china water closet squatting pan (Indian Type W.C. Pan) big pan No 20090 of size 53x41mm (fifty three by forty one millimeter) with low lewel PVC dual flushing Cistren of CERA / Hindware / Jaguar (earth work, bed concrete, foot rest and trap to be measured and paid for separately) Orrissa Pattern including entire carriage of materials within all leads and lifts as per direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous China wash down, water closet ordinary closet (European type. W.C. pan) of CERA / Hindware / Jaguar of size 57x35x35x39cm (fifty seven into thirty five in to thirty five into thirty nine centimeter) of star 5 No. 20087 with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) as per PWD specification. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing Vitreous China 100mm (One hundred millimeter) size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) sand cast iron including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 10.00 ltr. (ten liters) capasity PTMT Coloured / white low level duel flushing cistern of Hindware / CERA / Commondar / Diplomat with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing hollow Type plastic seat in Black or white plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing viterious pattern urinal of large No 60002 flat back type ( large) of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimeter) of Hindware / Jaquar / Cera including connection the urinal waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid sepertely) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing Vitreous China automatic flushing cistern 5 (five) litres capacity with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC floor trap of size 110 mm X 75 mm (one hundred ten by seventy five) ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. Complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 32mm (thirty two milimeter) nominal bore C.P. brass flush pipe / spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same Complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous china wash basin of 550x400mm (five hundred fifty into four hundred milimetre) of delta No. 10010 of Hindware / CERA / Jaguar with double hole for pillar tap with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting (Flat back) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing stainless steel kitchen sink of 610 x 510 mm (six hundred ten by five hundred ten milimeter) with bowl depth 200 mm (two hundred milimeter) size with approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters M.I. union for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two milimetres) diameters C.P. brass waste (Heavy duty make ISI marked) for wash basin or sink within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two milimetres) diameters C.P. Bottle Trap for wash basin and sink within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two milimetres) diameters P.V.C. waste pipe flexible (Coil type) length not less that 800 mm (eight hundred milimeter) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC collars of Phenolex / Vectus/ Reliance 75mm dia (seventy five milimeter diameter) including fixing with approved adhesive etc. complete.including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of Atul / Modi Guard /Goldenfish mounted on 6mm (six millimeter) thick A.C. Sheet or water proof sheet and fixed to plugs with C.P. screws and washers including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. Brass Towel rail of Kingstone / Jal / ESS size600mm x 20mmm (six hundred by twenty milimeter) complete with C.P. Brass brackets fixed to plugs with C.P. Brass screws complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 600 x 120mm (Six hundred into one hundred twenty milimetres) glass shelf with C.P. brass brackets and guard rail complete fixed to plugs with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing chromium plated brass soap dish of Kingstone / Jal/ ESS with C.P. brass brackets fixed to cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous china division plate for urinal 600x300mm (six hundred into three hundred millimetre) of Hindware / Jaquare / Cera complete in all respect including within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap with capstan head, of Kingstone / Jal / ESS, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. brass pillar tap with capstan head 15mm (fifteen millimetre) dia (Heavey duty makes of Kindston Gem / Parko / Jal / ESS / Jaguar / Sciko ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15mm (fifteen millimetre) Cansealed C.P. stop cocks with wheel of Kingston / Jal / ESS / Jaquar / Seilco including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing two hole basin mixing Faucet including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. brass angle valve 15mm (fifteen milimeter) without Nuts and pipe including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing brass ball valve (horizontal plunger type) High pressure with polythene plastic floats including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15mm (fifteen millimetre) C.P. Brass full way valve with wheel including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC water storage tank of Sintex having 500 Ltr (five hundred liters) capacity including G.I. (Galvanised Iron) inlet and outlet connection, 15mm (fifteen millimeter) bore ball value and mosquito proof PVC cover with locking arrangement including hosting up to all height above ground level including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. Brass shower rose with 15mm or 20mm inlet 150mm dia of Kingstone / Jal / ESS, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15 mm (fifteen milimetre) dia CP connection pipe brass union 450mm (four hundred fifty milimetre) length including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including with precast cement concrete cover 600mm (six hundred milimeter) diameter (medium duty) including frame with 300mm (three hundred milimetres) thick walls of brick masonry using cement dust clery building brick in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mm x 610mm (three hundred fifty five into six hundred ten milimeter) internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty milimeter) deep single pipe line. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm (twenty to fourty milimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing polythene aluminum polythene ( PE-AL-PE) composite pressure pipe of Kitec or its equivalent U.V. stabilized with carbon confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etc. but excluding the cost of fitting internal work pipe exposed on wall 1216-16 mm (Sixteen milimetre) O.D. pipe complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing polythene aluminum polythene ( PE-AL-PE) composite pressure pipe of Kitec or its equivalent U.V. stabilized with carbon confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etc. but excluding the cost of fitting internal work pipe exposed on wall 1620 - 20 mm (twenty milimetre) O.D. (outer diameter) pipe complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings equal tee 1216 as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings equal tee 1620 as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Reducing tee 1620 x all branches as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Female branch tee 1216 X 1216 X 15 (tweleve hundred sixteen by tweleve hundred sixteen by fifteen milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Female branch tee 1620 X 1620 X 20 (sixteen hundred twenty by sixteen hundred twenty by twenty milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Female elbows 1216 X 15 mm (tweleve hundred sixteen by fifteen milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Female elbows 1620X20 mm (tweleve hundred sixteen by fifteen milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Male thread connector 1216 X 15 mm (tweleve hundred sixteen by fifteen milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings Male thread connector 1620X20 mm (Sixteen hundred twenty by twenty milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings female thread connector 1216 X 15 mm (tweleve hundred sixteen by fifteen milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings female thread connector 1620X20 mm (Sixteen hundred twenty by twenty milimeter) thread as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings coupler 1216 as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings coupler 1620 as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing composite end seal compression fittings reducers 1620 x 1216 as per IS-15450-2004 for cold water supply with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 15mm (fifteen millimeters nominal bore/diameters to galvanized mild steel tubes (medium grade) in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters M.I. union for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15mm (fifteen milimetres) nominal size diameters G.I./M.I Union (where not included in the items), within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. (one point five meter) tube, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15 mm (fifteen milimetre) dia PVC connection pipe brass union 450mm (four hundred fifty milimetre) length including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying cement concrete 1:4:8 (One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimere) nominal size) in haunching of PVC pipes of the 150 mm (One hundred fifty millimetre) internal diameters including concrete for bedding necessary form work and curing complete. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) rain water pipes of supreme / finolex / princ working pressure not less than 4.5 kg (four decimal five kilogram) per square centimeter including filling the joints with approved adhesive complete 150 mm (one hundred fifty milimeter) dia. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) rain water pipes of supreme / finolex / princ working pressure not less than 4.5 kg (four decimal five kilogram) per square centimeter including filling the joints with approved adhesive complete 75 mm (Seventy five milimeter) dia. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 110 mm dia. (one hundred ten milimeter diameter)PVC plain “Y" junction ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 75 mm dia. (Seventy five milimeter diameter)PVC plain “Y" junction ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 110 mm dia. (one hundred ten milimeter diameter) PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 75 mm dia. (Seventy five milimeter diameter) PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC clamps 110 mm dia (One hundred ten milimeter diameter) ISI marked of approved design with steel screws and rawal plugs etc. Complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC clamps 75 mm dia. (Seventy five milimeter diameter) ISI marked of approved design with steel screws and rawal plugs etc. Complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 110 mm dia (One hundred ten milimeter diameter) PVC “Y" junction with oval access door, insertion rubber washer 3 mm (three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 75 mm dia. (Seventy five milimeter diameter) PVC “Y" junction with oval access door, insertion rubber washer 3 mm (three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 110 mm dia. (one hundred ten milimeter diameter)PVC plain “Y" junction ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 75 mm dia. (Seventy five milimeter diameter)PVC plain “Y" junction ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC reducer 110 mm X 75 mm dia. (one hundred ten by seventy five milimeter diameter) ISI marked including jointing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Supplying cast iron cover without frame for manholes for frame of internal dimension 455mmx610mm (four hundred fifty five by six hundred ten milimeteer) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg (twenty three kilogramme) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Brick bat/crushed stone aggrigate 40mm (fourty milimeter) in sock pit complete filling under sock pit Complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing of water lifting pump of 1.00 HP (horse power) of serex / kirloskar / Crompton / Wortington including all necessary fittings including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Shalabh Awasthi

Kapil Chand

AKSHAY THAKUR GOVT CONTRACTOR

Ghanshiam Singh Rana Govt. Contractor

Ashish Chauhan

YOG RAJ