GENERAL

Clock tower civil works

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel , including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Roof Slab 150mm Thk

Roof Slab 150mm Thk

Roof Slab 150mm Thk

Roof Slab 150mm Thk

Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).

Supply and installation of NUVOCOTTO or equivalent make Four Petal Jally tiles, including necessary adhesives and metal paste. The tiles shall be of Four Petal Jally type, measuring 8 inches x 8 inches with a thickness of 75 mm. The work shall involve the use of NUVOCOTTO or equivalent brand Polimer Tile adhesive in 0.2 kg/sqm packs and FLEX metal paste in 5-litre cans for proper fixing and finishing. The quoted rate shall be inclusive of the cost of all materials, transportation to the site, labour, operational and incidental expenses, and all other charges required to complete the work in accordance with the specifications and as directed by the Engineer-in-Charge.

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc

Flooring with Telephone Black Granite 16 to 18 mm thick up to 8'-00 (2.43 M) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Providing Cladding with Jaipur Sand Stone 20 to 25 mm thick up to 8'-00 (2.43 M) thick set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Stone tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats.

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-V.10

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections and MS Flat, MS Square Bars etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

ANALOG CLOCK-3 Nos

The GPS Tower Clock system consists of a 2-meter diameter clock of 3 numbers with GPS-synchronized time, weatherproof mechanism, and LED backlit dial for night visibility, designed for long life and low maintenance. Alongside, a programmable digital bell system with multiple scheduling options and automatic synchronization is provided. The scope also covers installation, erection, commissioning, testing, synchronization, and on-site training. Transportation to site, including safe handling and delivery, is included to ensure the complete system is supplied, installed, and handed over as per approved design.

Junction improvement civil works

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - R.C.C. work, including all sundries, all incidental and operational charges,and all labour charges etc.complete for finished item of work or as directed by the Engineer-inCharge.

Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts and lead upto 1000 m.

Dismantling of flexible pavements by mechanical means and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately as directed by the Engineer-in-Charge and as per MoRTH specification 202 II (5th revision)

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel , including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

RCC Wall-150mm thick

Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.

Brick Masonry work in CM (1:6) proportion with manufactured Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 225 x 140 mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 75kg/sqm for walls for Superstructure walls.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work BLD-CSTN 10-25 P.No.71

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc

Flooring with Telephone Black Granite 16 to 18 mm thick up to 8'-00 (2.43 M) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Providing Cladding with Jaipur Sand Stone 20 to 25 mm thick up to 8'-00 (2.43 M) thick set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Stone tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-V.10

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections and MS Flat, MS Square Bars etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997

Iland development works

Dismantling of flexible pavements by mechanical means and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately as directed by the Engineer-in-Charge and as per MoRTH specification 202 II (5th revision)

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel , including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.

Brick Masonry work in CM (1:6) proportion with manufactured Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 225 x 140 mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 75kg/sqm for walls for Superstructure walls.

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc

Flooring with Telephone Black Granite 16 to 18 mm thick up to 8'-00 (2.43 M) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Providing Cladding with Jaipur Sand Stone 20 to 25 mm thick up to 8'-00 (2.43 M) thick set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Stone tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-V.10

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections and MS Flat, MS Square Bars etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats.

Junction improvement medians

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - R.C.C. work, including all sundries, all incidental and operational charges,and all labour charges etc.complete for finished item of work or as directed by the Engineer-inCharge.

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel , including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

RCC Wall-200 mm Thick

Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc

Flooring with Telephone Black Granite 16 to 18 mm thick up to 8'-00 (2.43 M) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Supply and delivery of hard granite stone of size 0.15 x 0.30 with 60 mm thickness including cutting and fixing it to the face of the divider wall with set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with full depth, including cost of all materials like stones, cement, sand and water and labour charges and incidental charges etc., complete for finished item of work as directed by the Engineer-in-charge of work.etc., complete for finished item of work.(APSS No.701 &707) (R&B Pulivendula approved data 2020-21 SSR)

Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-V.10

Traffic Light retro fittings

Retrofit led for traffic pole (Qty 1 pcs x 3000/mtr)

Power Supply for each pole

Installation Cost (Retrofit installation charges per pole)

Pipes Work: Supply of CPVC pipe conforming to IS::9001:2015; Suitable for the respective working pressures without all fittings & accessories like Ts, Couplings, Bends, Reducers, screwed adapters, flanged tailpieces etc.

CPVC PIPE SIZE 63MM

CPVC ball valve with fittings

Supply and Installation of ms Ring Fountain 63mm with Nozzles

Supply and Installation of Open Well Submersible Pump with Starter and valves

Supply and Installation of warm white light mode with Transformer

Installation and supervision and transports charges

External Electrical Works

Supply,fabrication ,transportation and erection of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands. Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Supply, transportation and erection of 200w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply, transportation and erection of 60w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply, transportation and Installation of UNDER WATER LIGHTS Equivalent to Havells Cool White Waterproof LED Light, For Swimming Pool Makes : Bajaj / Crompton / Surya / VIN / Havells / Green Lights / Insta Power.

Supply, transportation and Installation of 5W STRIP LIGHTS Equivalent to Havells Led Ecstatic SL SQ 5 W 3000 K Anthracite Makes : Bajaj / Crompton / Surya / VIN / Havells / Green Lights / Insta Power.

Weather proof Junction box Supply, fabrication, installation of Weather proof Junction box with suitable terminals, MCB , connections as per site conditions MCCB MAKE: L&T ( DSINE), ABB(TMAX)

FEEDER PILLAR PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

3 Core 2.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3.5 Core 25 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

3 Core 2.5 Sqmm Copper cable

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size: Makes:Dowels/Comet/SMI

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

3 Core 2.5 Sqmm Copper cable

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required.

300mm dia NP2 RCC Hume pipe

150mm dia NP2 RCC Hume pipe

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excacvation including all soils for trench,

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984-2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Supply, transportation and Installation of Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser. Makes: Bajaj / Crompton / Surya / VIN / Havells / Green Lights Insta Power.

Supply, transportation and Installation of SPIKE LIGHTS Equivalent to HAVELLS LYCUS SPIKE LIGHT 9-WATT 3000K Makes: Bajaj / Crompton / Surya / VIN / Havells / Green Lights /Insta Power.

Supply, transportation and Installation of 5W FOOT LIGHTS Equivalent to Havells Led Ecstatic SL SQ 5 W 3000 K Anthracite Makes: Bajaj / Crompton / Surya / VIN / Havells / Green Lights /Insta Power

Landscape Works

Clearing the Medium and Dense Shrub /Besharam / Rubber plants uprooting wild vegetation, grass, bushes,saplings and disposal of unserviceable materials and stacking of serviceable material including removal, disposal and overheads & contractors profit complete for finished item of work

Bed preparation for Dibbling for Bermuda/Doob/ Shade Grass :-Dressing the surface to the desired shape, laying 150 mm (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, compacting to 4" thickness by hand roller including cost of red garden soil, sand and labour charges etc. complete for bed preparation and dibbling rooted slips of grass @2" apart and ramming including slipping of grass, racking the soil before dibbling, watering and ramming complete etc., for finished item of work excluding cost of dibbling grass and fertilizer for 1 sqm Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystaline, porous and friable, fertlie, slightly acidic or neutral

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., complete for finished item of work excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) complete for item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (*10 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) complete for item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (*6 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Digging of 0.45x0.45x0.45 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Maintenance of lawns: Watering 10 to 15 ltrs /per Sqmt/per day basing on season and weather conditions (30 watering is required in a month to maintain sub-soil moisture continuously), application of fertilizers, insecticides, Fungicides (once in a month) by manual excluding cost of fertilizers & water.

Maintenace of lawn

Maintenace of Shrub

Maintenance of Palms/Tree planting: watering (once in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture continuously) by manually, but excluding cost of water including all operational, incidental ,labour charges for complete of work.

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7" x 8" of plant height not less than 1.0 feet, 8" x 10" of plant height not less than 3.0 feet, 13" x 13" of Tree/Palm height not less than 5 feet, 13" x 13" of plant (Hedges & Shrub) height not less than 2 feet, 15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 8 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 10 feet, bottom dia of the stem is 1'' and above. Heights mentioned above are excluding bag height. All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plants, loading, transportation to the site, and unloading, labour charges for handling & complete for finished item of work.

For paspalum grass

for korean grass

Ophiopogon-jaburan-variegata(8"x10")

buxus microphylla(8"x10")

Potentilla(8"x10")

Tecomaria capensis(13"x13')

hymenocallis(13"x13')

heliconia-flower-plant(13"x13')

jatropha-integerrima-flower-(13"x13')

Ficus-Multi-Head(18"x18")

Plumeria (18"x18")

terminalia mantaly(21"x21")

round wood plant(21"x21")

Transportation of Lawn from kadiyum to guntur (Actual payment will paid for the actual work done subjected to approval of the rates by the competent authority)

Transportation of Bag plants from kadiyum to guntur (Actual payment will paid for the actual work done subjected to approval of the rates by the competent authority)

Cost of Fertilisers& Pesticides and unforeseen items

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for Shifting Utilities

Provision for Replacing and Replacement of Existing Statues

Provision for TPQA @ 0.739 %

Unforeseen item