Providing 11KV Feeder Line from 33/11KV Sub-Station Sector-168 to Sector-161, Noida

Supply of steel tubular pole 11 Metre long designated 410 SP-56 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect UPREC P-30

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre DSR Electrical 2018/I.No. 11.3.4

Supply of 185 sq. mm 3 core high conductivity aluminum strand compacted circular conductor XLPE armoured 11 KV(E) Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment complete in all respects as per direction of E/I. . (Polycab/Havells/Diatron/KEI/Gloster) AOR P-19(A)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required..(DSR elect 2018 Item.N. 8.3.2 Above 120 Sqmm and upto 400 Sqmm

S/F of jointing of following sizes outdoor/indoor type 11 KV jointing kit heat Shrinkable type for 11 KV Cable including cost of all material, labour, T&P etc. for proper completion of the E/I. (Raychem/Denson Make) uperc Pg-41 185 Sqmm

Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects P.S. No. 627

Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. P.S. No. 628

Supply & erection of hexagonal / cradle type gaused of G.I. wire no. 8 to 4 SWG including binding etc. complete in all respect. P.S. No. 629

Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay nsulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.. P.S. No. 630

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing ead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (B)

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.PS No. 717

Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. PS No. 1109

S/Laying of heavy density poly ethylene pipes ISI marked anti rediant grade OD 160mm dia PN-8 PE 100 (PE 400) grade as per IS code 4984 with excavation at a depth of 1.20 Mtr below ground level i/c the cost of cutting of pipes for making up to length and making joints complete all respects as per direction of E/I. (AOR) (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required . DSR Electrical2018 item No. 12.10

S/f of 11 KV Disc insulator 70 KN and fitting B&S heavy duty with clamp of cross arm fixed on ht pole BHEL/ Jai shree / WS/RR make UPERC 19 P No 24 I No 9

S/f of 11 KV Pin 12 long with insulator of Jai shree/BHEL on cross arm fixed on HT pole including all T/P etc UPERC P No 26 I No 7

S/F of straight MS channel 50x100 mm (9.2 per kg) 1.5 mtrs long including S/E of suitable clamp made of MS flat 50x6 mm including all nuts and bolts fixing on pole. T off channel UPERC P-48

Supply of Top MS Channel 100x50x2240mm as per design complete in all respects UPERC P-39

Numbering of poles with combination of yellow and black colour paint etc. complete in all respects as per direction of E/I (AOR)

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. PS No. 634

Providing and laying of 200mm dia 6mm thickness through trenchless method including jointing of pipe, excavation of thrust pit and receiving pit of required size with all T & P and the excavation & back filling with compaction complete as per specification for road crossing by H.D.D machine method pipoe will be installed at minumum depth 2M to 3 m below the ground surface or downward as per site condition in required slope.(AOR)

Supply and laying 90 mm dia DWC ( Double wall corrugated pipe across the road by Trenchless method (Manual). Complete in all respect as per direction of E/I. (AOR) (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

S/Making of Straight through joint suitable for 185 sq.mm x 3 core 11 KV armoured cable as per ISS & complete as per the direction and satisfaction of E/I (Raychem, Denson, Cabseal Make) UPERC 2019 Pg-29

11 KV RMU Panel (3 Way RMU):-Design manufacture testing at works supply, installation testing & commissioning of 3 panel Board 11KV, Indoor tree standing, floor mounting totally enclosed mela clad VCB insulated comprising of 1 Nos 11KV isolater load break switch and 2 Nos Vaccum circuit breaker as outgoing enclosed in robotically laser weided non-extensible type stainless steel SF6 VCB enclosre with Self Powered relay (IDMTL O/C +E/F) as HT switchgear including suitable transformer protection relays, metering, indicators push buttons, copper busbars, etc as per the requirement complete as required The fault with stand capacity shall be minimum 20KA for 1 second including four cable entries for two incoming cable and two outgoning cable glands and lugs suitable for 2x 240/185 sqmm XLPE armoure cable. Incomer shall be provided with 630A Manual Load Bread / Fault Make switch, integral Earthing Switch with making switch, "Live Cable" Indicating LEDs energized thru Capacitive Voltage Deviders, Transparent Viewing window for verification of Earthing, Right Angle terminal protectors / Boots, Electrical & mechanical indications as required, Outgoing feeders: Two nos. Vaccum circuit breakers with the following

SF-6 insulated 630A Circuit Breaker, integral Earthing Switch with making switch, Emergency Trip Push Button, Electrical & mechanical indications as required, Shunt Trip coil for external trip signal, "Live Cable" Indicating LEDs energized thru Capacitive Voltage Dididers, Transparent Viewing window for verification of Earthing, Right Angle terminal protectors /Boots, IDMT relay for Circuit Breakers self powered, Merlin Gerin type VIP35 or equivalent with required protection CTs of suitable ratio, Cable box for incoming and outgoing shall be suitable for icrminating, 11KV, XLPE insulated Aluminium conductor armoured cables, One set inbuilt DC power pack , Transformer protection relays as required as per SLD. Complete in all respects (AOR) (Make-ABB, Schiender, CG Power, Seimens)

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required..(DSR elect 2018 Item.N. 7.9/P30)

Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I.No. 5.07/S.N. 279

Cement Concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I.No. 5.08/S.N. 281

Demolishing Cement Concrete manually by mechanical means including disposal of material within 50 mtr lead as per direction of Engineer-in-Charge, Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR Civil 15.2.1 (AOR)

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate moorum screening, red bajri and labour required. i) bituminious portion (AOR)

water bound macadam (AOR)

Please Enable Macros to View BoQ information

CAPABILITY STATEMENT

*It is compasury for the bidder to fill this statement and the bidder must upload only those documents that support this statement.

Reference No 18/GM(E/M)/Sr.Manager/E&M-IV/2025-26

Tender-

Name of Tenderer

TOTAL NIT COST OF PROJECT (In Rs.)

Minimum Value

SOLVENCY (Issued within a period of minimum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years) Along with affidavite (UDIN No. Mandatory)

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive financial years

Required technical staff

Required machinery

licence (A) Class approved issued by the director electrical safety to UP Govt.

Copy of GST Registration

Power of Attomey in case of the firm

Copy of partnership deep in case of the firm

Blood relation affidavit on Rs. 100.00 stamp paper.

Lo?kkS"k.kk 'kiFk i= :0 100-00 ek= ds LVkEi isij ij