Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC BEING THE LOWEST BIDDER | |
| 2 | L2₹36.9 L+₹4.3 L (13.2%)Rejected-Finance 200 NAVAGAM NAVAGAM TA SAYLA SURENDRA NAGAR GUJARAT 363430 | SURENDRANAGAR | GUJARAT | 363430 | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹37.5 L+₹4.9 L (14.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹34.1 L
EMD Value
₹68,160
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Chiloda
GE (AF) Chiloda, Lekawada Patia, PO CRPF Campus, Gandhinagar (Gujarat)-382042
ADDN/ALTN TO WASHROOMS AND TOILETS OF SNCOS MESS WITH CERTAIN ALLIED B AND R WORKS SERVICES, PROVN OF XBIS CUM ACS ROOM NEAR SECURITY SECTION AND PROVISION OF RAIN WATER HARVESTING AT GT GROUND ALONG WITH MISC B/R WORK SERVICES AT GANDHINAGAR
2024_MES_635209_1
8998/23-24/E8
Open Tender
Civil Works
Item Rate
240 days
VAYU SHAKTI NAGAR CHILODA GANDHINAGAR
AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (AF) Chiloda
₹68,160
Yes
12 Mar 2024
1 Jan 2024
29 Jan 2024
1 Jan 2024
27 Jan 2024
15 Jan 2024
1 Jan 2024 - 14 Jan 2024
Amount
Excavation in trenches,n.exc. 1.5m wide and n.exc. 1.5m in depth for foundations etc. n.exc. 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation,floor complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed.
M&L Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L Brick work with fly ash brick, old size half bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L Reinforced Cement concrete (nominal mix)1:2:4 type B1 using 20 mm graded stone aggregate as in foundation footing complete all as specified and as directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat surface and rough finished surfaces of concrete complete all as specfied and as directed
M&L Reinforced Cement concrete (nominal mix)1:2:4 type B1 using 20 mm graded stone aggregate for column, pillars, piers, posts and struts etc complete all as specfied and as directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in Square, rectangular and rough surface complete all as specfied and as directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. in flat and rough surface also splays between floors and beams, etc complete all as specified and as directed.
M&L Reinforced Cement concrete (nominal mix)1:2:4 type B1using 20 mm graded stone aggregate as in Beams, cantilevers, bressumm?ers, lintels over 1.5m span complete all as specified and directed .
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in flat and rough surface complete all as specified.
M&L Reinforced Cement concrete (nominal mix) 1:2:4 type B1using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, shelves, complete all as specified and as directed.
M&L MS TMT bars 10 mm and above, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and as directed.
M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.
M & L for Hardcore broken stone or bouldersof gauge n exc. 63 mm, depos-ited, spread and lev-elled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L cement concrete type B1 1:3:6 (20mm graded aggregate) for plinth protection etc complete all as specified and directed.
M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and as directed.
Removing excavated material soils n exc 50m and depositing where directed at a leval n exc 1.5m above the starting point complete all as specified and as directed.
M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and as directed.
M&L for 10mm thick cement plaster in CM 1:3 as in ceiling, brick masonary/concrete surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for cement plaster on external surface of wall 15 mm thick in two layer 10 mm thick in first layer and 5 mm thick second layer with WPC as manufactures instructions on brick or concrete surfaces in cement mortar (1:4) finished even & fair without using extra cement work complete all as specified and as directed. Note : WPC shall be measured and paid separately.
M & L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of Chalk whiting complete all as specified and as directed.
M & L preparing new surface of ceiling and applying two coat of oil emulsion distemper over a coat of Chalk whiting complete all as specified and as directed.
M & L preparing new surface of wall and applying two coat of cement base paint over a coat of Chalk whiting complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mmx30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer intergral skin wih suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent srews holding strength to fix hinges and hold doors properly foa a long life) complete all as specified and directed.
S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with C type GI or 40x20x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.
S&F aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.
S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed.
S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 150mm complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directed.
S&F Frosted glass ordinary quality 4mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F 20 mm outer side dia Laying of CPVC Pipes & fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F modular Wardrobe sliding type including drower,18mm MR grade plywood anti termite decorative type with 1mm laminated for interrior including all fittings/accessaries complete all as specified and directed.
S & F vitreous china wash down water closet pan (pedestal pattern ) p or s trap (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.
S&F 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.
S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and directed.
S & F Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).
S&F CP Urinal spreaders complete all as specified and directed.
S & F Vitreous china table top wash basin of size 650x380x110mm catmax snow white colour including all fittings complete all as specified and directed.
S&F waste coupling with ceramic pop-up full thread 32mm for WHB complete all as specified and directed.
S&F Angle valve/ stop valves fancy type cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified and directed.
S&F Pillar taps fancy type , cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.
S&F CP wall mixer 3-in-1 with wall flange complete with all fittings as specified and directed.
S&F 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings complete all as specified and directed.
S&F CP Overhead rain shower - ABS type Square 180x180mm complete with complete with all fittings as specified and directed.
S&F CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and directed.
S&F Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified and directed.
S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S & F toilet paper holder complete all as specified and directed.
S&F in repairs brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.
S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified and directed.
S&F Rain Water Pipe of 110 mm (4") Dia. Vertical Fixed line: Plumbing Pipe Clamping Support made of Profile Bracket (A2 - 75 mm wall distance)+ Low Carbon Continuous Slotted C Channel (L3) size 10 inch. + U bolt (F2 - 110 mm dia. pipe). Profile Bracket (A2) / Continuous Slotted C Channel (L3) size 10" made of Low Carbon Deep Draw Hot Roll Gauge Corrected Mild Steel with Ribs and Notches and Hot Dip (> 65 micron) + Zn Al Flake coated ensuring Salt Spray Test of above 2000 Hours; with Flange Bolt & Flange Nut having natural serration - Zn Al Flake coated for fixing Profile Bracket and C Channel. The U bolts are made of Low Carbon Mild Steel with Rod diameter > 7 mm; Zn Al Flake coated with Semi Transparent Ribbed Silicon Rub Sleeve; with Flange nuts set having natural serration - Zn AlFlake coated. Refer Technical Drawing - TD 46 R1 for details. Note :- Profile Bracket (A2 - 100 mm Wall Distance) - 2 Nos; 2. Continuous Slotted C Channel - 10" size 1 No.; 3. U Bolt for 160 mm Pipe Dia. - 1 No.; 4. Justi Khilla 2" size Zn coated - 4 nos per set.
M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non wove fabric (wt. not less than 150 gms/sqm) laid over primed / tack coat of paving bitumen 85/25 @ 1.2 kg per sqm on roof surfaced by forced applicaion including cleaning surface complete all as specified and directed.
M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wall mixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed. Note - WPC shall be measured and paid separately.
Supply only integral water proofing compound.
M&L for preparing of old surfaces of walls incl complete removal of existing treatment and applying two coats of distemper oil emulsion complete all as specified and directed.
M&L for preparing of old surfaces of wall/chequered tiles floor and applying one coat of exterior emulsion paint complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base etc. complete all as specified and directed.
M&L for Rubber moulded Chequered cement concrete tiles with grey cement and pigments 20 cm x 20 cm x 25 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc with grey cement and pigment (Coloured Tiles) complete all as specified and directed.
Surface excavtion n.exc 30 cm deep and averaging 15 cm deep soft and loose soil complete all as specified and directed.
M&L for hardcore using broken stone or boulders not exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.
M & L for Sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed by Engineer-in-Charge.
M& L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and directed.
Removal of excavated soil to a distance exc. 50 m and not exc 250 m and deposited where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling of Corrugated, Semi corrugated, steel, fibre sheets in roof coverings complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 Sqm each complete all as specified and directed.
Excavating over areas, not exc 1.5 m deep and getting out soft /loose soil complete all as specified and directed.
Excavating over areas, exc 1.5 m but not exc 3.00 m deep and getting out soft /loose soil complete all as specified and directed.
M&L Reinforced Cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specfied and as directed.
M&L Reinforced Cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate for column, pillars, piers, posts and struts etc complete all as specfied and as directed.
M&L Reinforced Cement concrete M-25 (Design Mix)using 20 mm graded stone aggregate For Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L Reinforced Cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate for Chajja complete all as specified and directed.
M&L for formwork for Chajjas in flat surface and rough finished surfaces of concrete complete all as specified and directed.
M&L Brick work with fly ash bricks, old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.
M&L Reinforced Cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate for Slabs supported on walls, beams and columns in floors etc complete all as specified and directed.
M&L Reinforced Cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate For Fins, fascias, louvres, parapets, and railings exc. 60cm in height complete all as specified and directed.
M&L for formwork to fins, louvers, fascia in flat surface and rough finished surfaces of concrete complete all as specified and directed.
M&L for 5 mm thick cement plaster in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of primer and 3 mm thick wall care putty complete all as specified and directed.
M&L preparing new surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L preparing new surface of wall and applying two coat of cement based paint over a coat of wall primer complete all as specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and directed.
All as per item No 111 here in before but on vertical surfaces/skirting.
M&L for Cement Concrete 25mm Thick 1:2:4 Type B0 (12.5 mm graded aggregate) as in sub base complete all a specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
S&F 5.5 mm thick ordinary quality glass fixed to aluminum frame work with rubber beading gasket exc 0.5 sq. m in each pane complete all as specified and directed.
S&F aluminium extruded section body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F brass mortice lock vertical type 4 lever of size 100 mm long with handle including taking down old mortice lock complete all as specified and directed.
S&F 200 mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
M&L 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to aluminum frame work complete all as specified and directed.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.
Site Clearance in Soft/loose soil complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (40mm graded broken stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement inclding form moulds mitred /stopped ends etc complete all as specified and directed.
M&L for Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping including weathering, slightly rounded or charmfered angles and throating as directed including necessary form work complete all as specified and directed.
M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:6 incl necessary form work and demolition complete all as specified and as directed by Engr in charge.
M&L for brick work with fly ash brick curved on plan to any radius for main hole, septic tank, soakwell ec in sewer work in CM 1:3 complete all as specified and as directed.
M&L for Salt glazed stone ware drain pipes grade 'A' laid to slope in trenches jointed in cement mortar (1:1) and tested complete for size of 150mm dia complete all as specified and as directed.
M&L for plain cement concrete type 1:3:6 type C2 using 40mm graded stone aggregate as concrete bed to drain pipes of 150mm bore including packing under and haunching the sides of pipes after they are laid and tested complete all as specified and as directed.
Supply and fix mild steel bars TMT 8mm dia and over, cut to length bent to shape reqd,incl cranking bending spirally for hooping of columns,hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips quality controlling as directed.
Cutting into existing manholes for connecting new drains of internal dia 150mm,making good to pipe and rendering,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished,and reforming benching as required complete all as specified and directed.
S&F for 25 mm dia galvanized steel (GI) tubing 'medium grade' with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Labour only for boring under road/ drain by manual method for inserting the GI tubing up to 40mm dia complete all as specified and as directed by Engineer-in-Charge.
S&F bronze ball valve with handle, screwed both ends suitable for 25 mm dia iron pipe complete all as specified and as directed.
M&L for drilling hole in existing water mains upto 80mm dia of any type for tapping branch connections of 20 mm dia including GI Saddle tee of suitable size complete all as specified and as directed.
M&L Loose filling with aggregates with broken stone or boulders of gauge 80 to 150 mm in soakage pits, soakage wells and Recharge pits etc complete all as specified and as directed.
M&L Loose filling with aggregates with broken stone or boulders of gauge 40 mm to 80 mm in soakage pits, soakage wells and Recharge pits etc complete all as specified and as directed.
M&L Loose filling with aggregates with broken stone or boulders of gauge 6 mm to 20 mm in soakage pits, soakage wells and Recharge pits etc complete all as specified and as directed.
M&L Cement concrete type B0 1:2:4 (12.5mm graded aggreded) in benching, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as specified and as directed.
Demolition Concrete of any description and in any position not otherwise specifically provided for Cement concrete (unreinforced) complete all as specified and directed.
Taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
M & L Rendering 15mm thick on fair faces brick surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
Boring holes 300mm diameter & 25 m depth in soil for recharge pits and getting out and Removing/disposal of soil to a distance of n exc. 50 m complete all as specified and directed by Engineer in charge.
S&F 150mm bore PVC (SWR) slotted pipes Grade B single/double socketed, in any length with rubber ring joints, laid in bore holes for recharge pits complete all as specified & directed by Engineer in charge.
Material and labour for point wiring for one light point or one fan point or one bell point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core,FRLS PVC insulated & unsheathed cable, 1100 volts grade drawn through concealed PVC conduit and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly factory made GI sheet sunken box complete all as specified and directed.
All as per Serial item No 145 here-in-before but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on same board.
All as per Serial item No 145 here-in-before but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on independent board.
All as per Serial item No 145 here-in-before but point wiring for one 6 pin switch socket outlet combination, 5/15 amps (independent) with using 2.5 sq.mm (nominal area) copper PVC insulated unsheathed stranded copper conductor as continuous earth wire on independent board for one socket outlet 3 pin 15 amps.
Supply and fixing for switch piano flush type, 5 amps, single pole, one way, 230 volts AC complete all as specified and as directed.
Supply and fixing for Bell push flush type, 5 Amps, single pole, 230 volts AC complete all as specified and as directed.
S & F for call bell AC, 230 volts, single pole complete all as specified and as directed.
S & F for socket outlet, five pin, 5 amps, flush type, 230 volts AC complete all as specified and as directed.
S & F for switch socket outlet combination, five pin, 5 amps, flush type, 230 volts AC complete all as specified and as directed.
S & F for switch socket outlet combination, multipurpose, 3 pin, 15 amps and 3 pin 5 amps controlled by one switch, flush type, 230 volts AC complete all as specified and as directed.
S & F for ceiling rose surface bakelite, three terminals complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 250 mm complete all as specified & directed
Supply, fixing, connecting and testing sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 8 way with having copper bus bars suitable for 200 amps rating including taking down old unserviceable one complete all as specified & as directed
All as per item No 157 here in before but 4 way.
S & F MCB single pole & neutral (SP&N), 16 to 32 Amps, 240 volts, 10KA, ‘C’ series, with proper connections complete all as specified & as directed
S & F MCB single pole (SP) 6 to 32 Amps, 240 volts, 10KA, ‘B’ series, complete all as specified & as directed.
S & F Surface and wall mounted high efficacy 1x20 watt LED batten, aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver CRI >80, Beam Angle120° complete with all accessories internally pre wired and including connection up with twin core flexible copper conductior cable complete all as specified and as directed.
S & F LED light fitting mirror type with high out put diffuser 2 feet, 11/12 watt 220 V AC Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square shape, CRI >80, Beam Angle 120° including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F for outdoor type IP66, Energy saving LED street light fitting 30 Watt 230 V AC with PDC Aluminium body & Secondary optical lens for superior light distribution. Efficacy >110 Lm/W. with high pressure die cast aluminum hosing and heat resistant LED street light fitting with driver, complete all as specified and directed.
S & F fan regulator step type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 60/100Watt complete all as specified & directed.
Supply and fixing BLDC ceiling fans with three blade, down rod, accessories 230V, 1200mm sweep, Five star rated with brushless direct current motor complete all as specified & directed
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as per shown in electrical plate No. 5 of MES Schedule Part-I with connected to earth test point main switch board with including necessary earth work and Pre- cast RCC earth pit with cover and including dismantling/taking out of old unserviceable earthing of any position complete all as specified and directed.
Supply, installation and testing for electric driven single phase hi wall Digital Inverter 4 -in-1 convertible 1.5 TR, 5 star rating split AC, eco frendly refrigerant with indoor & outdoor unit with copper condenser, cordless remote, 3D air flow, anti-dust PM 2.5 air filter, copper pipe, mounting stand etc. complete all as specified and directed. (Note: indoor and out dooor unit connection copper pipe and cable are included in this item rate.)
Supply & Fixing for wall mounted 15 Amp capacity digital voltage stabilizer, for automatic voltage correction single phase, naturally air cooled, indoor type, designed for or input voltage of 170 V to 270 V and output voltage stabilized between 230 V with accuracy of 2.5% complete all as specified and directed.
Supply & Fixing industrial type sheet metal enclosures with a two pin and earth plug and socket, 250 volts with including 20 Amp SPN MCB complete all as specified and directed.
Material and labour for point wiring for one 15 amps, independent, with cables 4 sq. mm size (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade drawn through concealed PVC conduit and one run of FRLS PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm as earth continuity conductor complete all as specified and directed.
ARTI CONSTRUCTION
SNEH TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .