Construction of City Civic Centre in South Zone (Ratanpar) of Surendranagar Municipal Corporation, Surendranagar (3rd Attampt)

Total Amount without GST

BILL OF QUANTITIES (City Civic Centre, Ratanpar)

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

Demolition & Dismantling work

1.0 Credit Material of All Type Material Include in -1.00 JOB 150,000.00 -150000.00

2.0 Excavation for foundation up to 1.5 mt depth in soft 150.00 Cu-mt 115.92

and loose soil including sorting out and stacking of

useful materials and disposing of the excavated stuff

up to 50mt lead. A Loose ar soft soil.

3.0 Excavation for foundation For depth 1.5mt to 3.0mt 228.00 Cu-mt 128.52

including sorting out and stacking of useful

materials and disposing of the excavated stuff up to

50mt lead. A Loose ar soft soil

4.0 Filling available excavated earth (excluding rock) in 46.56 Cu-mt 129.10

trenches, plinth, sides of foundations etc. in layers

not exceeding 20cm in depth consolidating each

deposited layer by ramming & watering.

5.0 Filling foundation and plinth with murmur or 106.83 Cu-mt 279.23

selected soil in layers of 20 cm. thickness including

watering, ramming and consolidation etc.

6.0 Filling in plinth with sand under floors including 35.61 Cu-mt 420.69

watering, ramming, consolidating and dressing etc.

completed to 10 ton

7.0 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived RO Cu-mt

from natural sources : 8 graded stone aggregate

mm nominal size derived from natural sources) -

For Foundation PCC

8.0 Providing and laying cement concrete1:3:6 (1- 4.32 Cu-mt 2,926.96

Cement:3-coarses and:6-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

9.0 Providing and laying in position ready mixed or site

batched design mix cement concrete M250 for

reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural

sources, Portland Pozzolana / Ordinary Portland

/Portland Slag ceme

A ( A ) Providing and laying controlled cement 43.26 Cu-mt 4,172.90

concrete M.250 and curing complete excluding the

cost of formwork and reinforcement for reinforced

concrete worki n ( A )Foundations,footings,Base of

columns and Mass concrete.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

B (C) Slabs,landing,shelves,Balconies, Lintels, Beams, 53.71 Cu-mt 4,430.94

Girders and Cantilever upto floor two level.

C (A) Foundations, footings, Base or columns and 5.10 SQ.M 173.25

Mass concrete - Rate including Form work but

excluding Reinforcement M25

D (G) Columns PillarsPosts and struts. (1) Square 40.80 SQ.M 297.68

Rectangular Polygonal in plan.

E (H) (1) Sides and soffits of Beams Beam Haunchings 128.61 SQ.M 193.73

cantilevers Girders Bressumers and Lintels not

exceeding 1 M. in Depth.

10.0 Providing and laying in position site batched design

mix cement concrete for reinforced cement

concrete work; using coarse aggregate and fine

aggregate derived from natural sources, admixtures

in recommended proportions as per IS:9103 to

accelerate /retard setting of concrete, to improve

durability and workability without impairing

strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but INCLUDING

the cost of centering, shuttering, finishing and

EXCLUDING THE COST OF reinforcement as per

direction of the engineer-in-charge; for the

following grades of concrete. Note- Extra cement up

to 10% of the minimum cement content in design

mix shall be payble separately. In case the cement

content in design mix is more than 110% of the

specified minimum cement content the contractor

shall have discretion to either re-design Concrete of

M25 grade with minimum cement All works above

plinth level up to floor V level

A ( A ) Providing and laying controlled cement 10.00 Cu-mt 4,528.77

concrete M.250 and curing complete excluding the

cost of form work and reinforcement for reinforced

concrete work in (D)Columns, Pillars posts and

struts, upto floor two level.

B (C)Slabs, landing, shelves, 31.93 Cu-mt 4,430.94

Balconies,Lintels,Beams,Girdersand Cantilever upto

floor two level.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

11.0 Drilling suitable holes in reinforced or plain cement

concrete with power driven drill machine to a

minimum depth of 100mm upto 200mm in RCC

beams, lintels, columns and slabs to introduce steel

bars for sunshades/balconies including fixing the

steel bars in position using epoxy resin anchor grout

of approved make but excluding the cost of

reinforcement, all complete as per direction of

Engineer-In-Charge.

a 8mm Dia in 80mm deep & 12 mm Dia drilling 18.00 Each 183.52

b 10mm Dia in 100mm deep & 14 mm Dia drilling 36.00 Each 263.66

12.0 Brick work using common burnt clay building bricks 24.84 Cu-mt 4,011.66

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Lime Mortar 1:1.5 (1-

Lime putty :1.5 -fine sand)(B) Conventional

13.0 Brick work using common burnt clay building bricks 36.82 Cu-mt 4,277.31

having crushing strength not less than

35kg./Sq.Cm.in foundation and plinth in Cement

Mortar 1:5.(1-Cement: 5 -fine sand) (B)

Conventional + Extra for brick work insuperstructure

above plinth level upto floor two level (B)

14.0 Extra for brick work in superstructure above floor 10.00 Cu-mt 265.65

two level Item No. 1(6.12) (B) Conventional

15.0 (i) Half brick masonry in common brunt clay building 19.32 SQ.M 593.90

bricks having crushing strength not less than

Kg/Sq.Cm. In Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (B)

16.0 Extra for brick work in superstructure above floor 5.00 SQ.M 40.09

two level Item No. 5 (B) Coventional

17.0 Providing 20mm thick cement plaster in single coat 385.83 SQ.M 206.33

on single or half brick walls for interior plastering

upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand)

18.0 20 mm thick send face cement plaster on wall up 208.35 sQ.M 322.88

to height 10meters above ground level consisting of

12mm thick backing coat of C.M.1:3 ( 1 cement :3

sand ) and 8mm thick finishing coat of c.m 1:1 (

cement :1 sand etc. Complete.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

19.0 Providing and laying Vitrified tiles 8 to10mm thick, 93.25 sQ.M 1,062.50

24''x24'' in skrting risers of steps and dedo on10mm

thick cement plaster 1:3(1-cement:3-

coarsesand)and jointed with white cement slurry

20.0 Providing and laying coloured glazed tiles of the size 95.76 sQ.M 1,403.33

mm in skirting, risers of steps and dido on 10 mm.

thick cement plaster 1:3 (1 cement :3 coarse sand)

& jointed with white cement slurry.

21.0 Providing and laying Kota stone slab flooring over 20 35.90 SQ.M 962.33

mm (average) thick base of cement mortar 1 : 6 (1

cement : 6 course sand) or L.M. 1 : 1.5 laid over and

jointed with Grey cement slurry mixed with pigment

to match the shade of slab including rubbing and

polishing etc. complete (A) 25 mm thick.

22.0 Providing and laying Ceramic tiles 6mm thick in 50.00 SQ.M 935.55

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishingwith flush pointing in white

23.0 Providing and laying one sided polished granite slab 95.10 SQ.M 3,006.60

of thickness (15 to 18mm) for door and windows

jambs with approved shade and size,colour,texture

laid over 15mm thick base cement mortar 1:3

(1Cement :3 fiine sand) joint treated with cement

mixed with matching pigment inlcuding

rubbing,curing, moulding and polish to edge to give

high gloss finish etc complete at all levels. As per

technical specification of the tender,etc complete,

as per drawings and design supplied by architect

and instructions given by authority and EIC.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

24.0 Providing and fixing window having extruded 31.50 SQ.M 1,568.27

aluminum Colour anodized section frame main

outer size 95mm x24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to

frameas per details etc

25.0 Providing and fixing window having extruded 5.40 sQ.M 1,696.93

aluminum Colour anodized section frame main

63.50x38.10x1.95mm,@Wt1.094Kg/Rmt,horizontal

two track member size

[email protected]

0.695Kg/mt,vertical member of size

61.85mmx31.75mmx1.30mm@ wt. of 0.659Kg/mt

with sliding shutters of horizontal member size

40mmx18mmx1.29mm @wt. of 0.456Kg/mt,vertical

member of size 40mmx18mmx1.29mm @ wt.of

0.456Kg/mt,@Wt.0.457Kg/mt with 5mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fitting sand fixtures and

transparent silicon sealant glass fixing to frame as

per details etc complete for window.

26.0 Providing and fixing standared extruded of 1.35 sQ.M 1,163.92

alluminium section of size 63mmx38.10mmx1.2mm

@Wt.0.643 Kg/mt with colour anodized alluminium

frame for ventilation with 5mm thick frosted glass

as details etc complete for Ventilation

27.0 Providing and fixing M.S. Grills of required pattern 688.50 KG 100.17

to wooden frames of window etc. with m.s plate at

required spacing and frame around square or round

bars with round headed bolts and nuts of by screws

(A) Plain grill

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

28.0 Providing and fixing 35 mm thick shutters for Doors, 28.08 SQ.M 5,285.45

windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings

including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

29.0 Providing and fixing FRP frame size 125x65 mm and 7.56 SQ.M 1,999.98

35mm thick FRP shutter having extra reinforcement

on sides & edges in polish finish. The core of the

shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener

30.0 Providing and fixing in position collapsible steel 19.16 quintal 5,767.65

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with

top and bottom rails of T_tin 40x 40 x 6 mm with

38mm dia, steel pulleys complete with bolts, nuts,

lock locking arrangements, stoppers, handles

including applying a priming coat of red lead paint.

31.0 Wall painting (two coats) with plastic emulsion paint 771.66 SQ.M 78.12

of approved brand and manufacture on

undecorated wall surfaces to give an even shade

including thoroughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth

32.0 Ceiling Paint (two coats) with plastic emulsion paint 1506.40 SQ.M 78.12

of approved brand and manufacture on wall

surfaces to give an even shade including thoroughly

brushing the surface free from mortar droppings

and other foreign matter and sand papered

33.0 Applying priming coat over new steel and other 50.74 SQ.M 34.65

metel surface after and including preparing the

surface by throughly cleaning, oil, grease, dirt and

other foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

34.0 Painting two coats(excluding priming coat)on new 50.00 SQ.M 86.94

steel and other metal surface with enamel

paint,brushing,interior to give an even shade

including cleaning the surface an even shade

including clean icn the surface of all dirt, dust and

other foreign matter.

35.0 Applying two coats of putty & two coats of primer of 2278.06 SQ.M 40.19

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

36.0 Providing and fixing concealed center point to wall 50.00 rmt 165.21

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.

37.0 Providing and fixing concealed center point to wall 100.00 rmt 202.97

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[B] 20 mm

38.0 Providing and fixing concealed center point to wall 150.00 rmt 247.25

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[C] 25 mm

39.0 Providing and fixing concealed center point to wall 250.00 rmt 330.36

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[D] 32 mm

40.0 Providing and fixing concealed center point to wall 100.00 rmt 437.66

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[E] 40 mm

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

41.0 Providing and fixing concealed center point to wall 70.00 rmt 647.30

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[E] 50 mm

42.0 Providing and fixing Gun metal check or non-return 5.00 each 656.86

fullway wheel valve.(E) 40mm dia.

43.0 Providing and fixing Gun meta check or non-return 2.00 each 416.47

full way wheel valve.(C) 25mm dia.

44.0 Providing and fixing Gun meta check or non-return 5.00 Each 311.61

full way wheel valve.(C) 32mm dia.

45.0 Providing and fixing chromium plated brass half trun 5.00 Each 261.16

flush cock of approved quality including fixing in

pipe line etc. complete.(ii) 25mm dia.

46.0 Providing and fixing pillar tap, capstan head screw 7.00 Each 351.18

down high pressure with screws shanks and back

nuts.(20 mm dia)

47.0 Providing and fixing wash down water closet 5.00 Each 1,290.80

European type W.C. pan with integral “P” or “S”

trap including jointing the trap with soil pipe in

cement mortar 1 : 1 (1 cement : 1 find sand) (seat

and cover to be measured and paid for separately)

(A) Vitreous China Pattern:(i) in white colour

48.0 Providing and fixing12.5 Litres low level flushing 5.00 each 2,321.21

cistern with a pair,of C.I.or Mild brackets,complete

with fittings such as lead valve less syphon,15mm

nom.nal size brass ball valve with polythene

float,C.P brass handle unions and couplings for

connections,with inlet,outlet and over flow

pipes,40mm dia.porcelain enamelled flush bend

including cutting holes in walls and making good the

same connecting the flush bend with cistern and

closet(over flow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

49.0 Providing and fixing plastic seat and cover for wash 5.00 each 288.45

down water closer with C.P.brass hinges and rubber

buffers. (B) Black plastic seal and cover.

50.0 Providing and fixing in position with clamps 15.00 RMT 259.88

etc.32mm nominal internal dia meter galvanised

steel tube flush pipe for high level flushing cistern

including connecting the flush pipe with cistern and

closet and making good the walls and floors.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

51.0 Providing and fixing water closet squatting Pan 2.00 each 927.68

(Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, foot reste and trap Rate included ) (A)

Vitreous China.(I) Long pattern = White colour

52.0 Providing and fixing white Wash basin with single 7.00 Each 1,400.18

hole for pillar tap,with C.I. Or M.S. bracket painted

white including cutting holes and making good the

same but excluding fittings (A) vitreous china Flat

back washbasin 550mm x 400mm size in white col

53.0 Providing and fixing C.P.brass waste for wash basin 7.00 each 67.24

or sink. (A) 32mm dia.

54.0 Providing and fixing M.I. fisher union for wash basin 10.00 each 77.97

or sink. (A) 32mm dia.

55.0 Providing and fixing Urinal of approved quality 4.00 each 1,026.01

including conecting the Urinal with waste pipe,tap

etc.complete.(A) White earthenware flat back or

corner type size 430mm x 260mm x 350mm.

56.0 Providing and fixing Urinal of approved quality 4.00 Each 1,538.78

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

57.0 GRANITE PARTITIONS FOR URINALS -Providing and 1.08 Sq-Mt 3,922.20

fixing of double side polished approved granite

urinal partition of size 600mmx 900mm H formed

out of 19mm th approved shade granite fixed as per

detailed drawing. Granite partition to be ground on

the edges As per technical specification of the

tender,etc complete, as per drawings and design

supplied by architect and instructions given by

authority and EIC.

58.0 Providing and fixing approved company made 5.00 Each 414.53

Providing and fixing toilet paper holder (A) C.P Brass

59.0 Providing and fixing chromium plated, bottle trap 8.00 Each 292.87

with necessary couplings of approved quality for

wash basin, Urinal

60.0 Providing and fixing brass screw down stop tap.(A) 8.00 Each 203.79

61.0 Providing and fixing PVC SWR Nahni trap IS 14735 10.00 each 552.83

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

62.0 Health Fauset Heavy duty with hook with fitting 5.00 Each 576.27

63.0 Providing and fixing bib cock two way XM-2109 with 5.00 Each 1,539.00

wall flange of 15mm dia. Of Jaquare or ISI mark or

its equivalent brand as directed etc. complete.

64.0 Providing and fixing S.W. gully trap with C.I. grating 4.00 each 1,234.57

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (A) 100mm

x 100mm size P type (A) 100mm x 100mm size-P

65.0 Providing and fixing 600mmx450mm beveled edge 4.00 Each 825.48

mirror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet & fixing to wooden plugs

with C.P. screws and washers.

66.0 Providing & laying ( to level or slopes ) & jointing 10.00 Ra-mt 302.03

with stuff mixtures of cement mortar in proportion

1:1 salt glazed stone ware pipes nominal internal

diameter including testing of pipes and joints etc

complete (B) 150mm dia

67.0 Providing and fixing C.P. brass towel rail comlete 4.00 Each 597.22

with C.P.brass brackets fixed to wooden plugs with

C.P.brass scews.(B) 600mm x 20mm size.

68.0 Providing laying and jointing in true line and level 50.00 rmt 146.65

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

69.0 Providing, laying and jointing in true line and level 50.00 rmt 826.80

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials

70.0 Providing and erecting & fixing double coated 2000.00 Litre 3.91

Syntax PVC( ISI ) water of require capacity each with

all necessary fitting and connection etc. complete

71.0 Providing composite water proofing treatment to 29.94 SQM 1,963.00

floor and walls of water tank, w.c. bath area,

through approved agencies preparing floor and wall

for water proofing work/ by chasing/ cutting as per

the companies requirement. First by providing and

applying cementitious crystalline based

waterproofing for concrete rafts, walls, water tanks,

slabs, concrete floors etc. with Epoxy coating. The

application to be done from positive side on a wet

open pore concrete surface with brush @ to

kg/Sqmt as per mfg.'s specification. After testing

with ponding after 7 days, a layer of plaster with

waterproofing compound/ admixture about 25 mm

thick in the floor/ depression and about 18 mm on

the side walls/ depression up to the floor level shall

be provided over the surface treated with crystalline

powder. The waterproof plaster about 18 mm thick

to be continued on the walls above the floor level

for a height of 900mm with surface suitable to

receive further finishing treatment all complete as

per companies specifications and instructions and

as directed for all heights and floors. The round vata

shall be included in this in sq. Mt and shall be taken

upto top of round on wall Providing & laying cement

water proofing of average 115 mm thick for terrace

slabs using cement mortar of 1:2:4As per

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

72.0 Providing and fixing pre-cast Rubber Dye/stee lDye 180.00 SQ.M 677.11

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS15658:2006 including 35mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

73.0 Providing TMT Bar FE 500D reinforcement for R.C.C. 67231.64 KG 75.46

Work including bending, binding and placing in

position complete upto floor two level

74.0 Providing and fixing stainless steel ( Grade 304) 30.80 RMT 4,463.00

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and

bolts.As per technical specification of the tender,etc

complete, as per drawings and design supplied by

architect and instructions given by authority and

75.0 Conveyance charges of earth, lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregate of any kind etc.

a Conveyance charges upto 1 km 100.00 cumt 47.57

b Conveyance charges upto 2 km 100.00 cumt 61.86

c Conveyance charges upto 5 km 150.00 cumt 102.24

d Conveyance charges upto 6 km 200.00 cumt 111.62

e Conveyance charges upto 7 km 100.00 cumt 111.62

f Conveyance charges Above 7 km 150.00 cumt 119.92

76.0 Providing and filling the wastage of lightweight 28.79 cumt 1,908.00

cement block as sample approved by engineer

incharge for toilet sunk slab.As per technical

specification of the tender,etc complete, as per

drawings and design supplied by architect and

instructions given by authority and EIC.

77.0 Providing & fixing Commander make grab bar made 1.00 Job 55,979.20

up of aluminium alloy for divyang toilet with EWC P

pr S concealed (710 x 370 x 810), Cistren, Curse

Special soft close seat cover, internal fittings,

washbasin 510 X 400m, Spatula lever faucet, 2 nos

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

78.0 Providing and fixing chicken mesh jali at R.C.C. 94.50 SQ.M 571.50

masonry joints at any height with all labour &

material etc. complete.As per technical specification

of the tender,etc complete, as per drawings and

design supplied by architect and instructions given

by authority and EIC.

79.0 Constructing brick masonry chamber for 5.00 each 2,903.89

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with

a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe

line. (more than 10 ton)

80.0 Constructing brick masonry chamber for 3.00 each 3,624.51

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with

a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line

with one or two inlets. (more than 10 ton)

81.0 Extra over items 84 for every additional depth of 4.00 each 239.99

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 455mm x 610mm

82.0 Extra over items 85 for every additional depth of 4.00 each 262.24

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(ii) for 500mm x 700mm

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

83.0 Providing and laying broken chine mosaic flooring 175.00 sqm 739.89

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white

cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing

with water and oxalic acid etc. as directed.

84.0 Providing and fixing exposed brick cladding with 220.41 sqm 1,500.00

approved quality facing bricks of specified size, colour,

and texture, laid in 1:4 cement-sand mortar over

backing wall, including stainless steel/GI anchor clamps

at 500 mm c/c, joint pointing with matching mortar,

curing, finishing, cleaning with acid wash, and applying

water-repellent sealant, complete as per drawings and

Engineer’s instructions.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

BILL OF QUANTITIES ( Compound wall & Paving )

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

1.0 Excavation for foundation up to 1.5 mt depth in soft 229.30 Cu-mt 115.92

and loose soil including sorting out and stacking of

useful materials and disposing of the excavated stuff

up to 50mt lead. A Loose ar soft soil.

2.0 Excavation for foundation For depth 1.5mt to 3.0mt RO Cu-mt

including sorting out and stacking of useful

materials and disposing of the excavated stuff up to

50mt lead. A Loose ar soft soil

3.0 Filling available excavated earth (excluding rock) in 187.86 Cu-mt 129.10

trenches, plinth, sides of foundations etc. in layers

not exceeding 20cm in depth consolidating each

deposited layer by ramming & watering.

4.0 Filling foundation and plinth with murmur or 50.00 Cu-mt 286.20

selected soil in layers of 20 cm. thickness including

watering, ramming and consolidation etc.

5.0 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived 12.15 Cu-mt 2,653.67

from natural sources : 8 graded stone aggregate

mm nominal size derived from natural sources) -

For Foundation PCC

6.0 Providing and laying cement concrete1:3:6 (1- 4.42 Cu-mt 2,976.00

Cement:3-coarses and:6-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

7.0 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland /Portland

A ( A ) Providing and laying controlled cement 25.31 Cu-mt 4,238.04

concrete M.250 and curing complete excluding the

cost of formwork and reinforcement for reinforced

concrete worki n ( A )Foundations,footings,Base of

columns and Mass concrete.

B (C) Slabs,landing,shelves,Balconies, Lintels, Beams, 20.35 Cu-mt 4,496.04

Girders and Cantilever upto floor two level.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

C (A) Foundations, footings, Base or columns and 33.75 Sq.mt. 171.68

Mass concrete - Rate including Form work but

excluding Reinforcement M25

D (G) Columns PillarsPosts and struts. (1) Square 46.13 Sq.mt. 297.68

Rectangular Polygonal in plan.

E ( A ) Providing and laying controlled cement 6.75 Cu-mt 4,593.91

concrete M.250 and curing complete excluding the

cost of form work and reinforcement for reinforced

concrete work in (D)Columns, Pillars posts and

struts, upto floor two level.

F (C)Slabs, landing, shelves, 5.69 Cu-mt 4,519.88

Balconies,Lintels,Beams,Girdersand Cantilever upto

floor two level.

G (G) Columns PillarsPosts and struts. (1) Square 22.50 Sq.mt. 297.68

Rectangular Polygonal in plan.

H (H) (1) Sides and soffits of Beams Beam Haunchings 24.75 Sq.mt. 192.15

cantilevers Girders Bressumers and Lintels not

exceeding 1 M. in Depth.

8.0 Brick work using common burnt clay building bricks 34.57 Cu-mt 3,981.21

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

9.0 Providing 20mm thick cement plaster in single coat 19.21 SQ.M 190.58

on single or half brick walls for interior plastering up

to floor two level and finished even and smooth in

(ii) Cement mortar 1:4 (1-cement :4-sand)

10.0 Providing 10mm thick cement plaster in single coat 10.00 SQ.M 137.34

on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

11.0 20 mm thick send face cement plaster on wall up 306.00 Sq-mt. 297.68

to height 10meters above ground level consisting of

12mm thick backing coat of C.M.1:3 ( 1 cement :3

sand ) and 8mm thick finishing coat of c.m 1:1 (

cement :1 sand etc. Complete.

12.0 Providing and laying polished Kota stone slab 10.00 Sq-mt 982.83

flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

(1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

13.0 Providing and laying one sided polished granite slab 10.00 SQ.M 3,006.00

of thickness (15 to 18mm) for door and windows

jambs with approved shade and size,colour,texture

laid over 15mm thick base cement mortar 1:3

(1Cement :3 fiine sand) joint treated with cement

mixed with matching pigment inlcuding

rubbing,curing, moulding and polish to edge to give

high gloss finish etc complete at all levels. As per

technical specification of the tender,etc complete,

as per drawings and design supplied by architect

and instructions given by authority and EIC.

14.0 Steel Work welded, in build up sections, framed 7.00 Quint 8,330.18

work including cutting, hoisting fixing in position and

applying a priming coat of red lead paint (A) In

beams and joints channels, angles tees , flats with

connecting plates of angle cleats as main and cro

15.0 Providing TMT Bar FE 500D reinforcement for R.C.C. 6506.45 KG 75.46

work including bending, binding and placing in

position complete upto floor two level

16.0 Painting two coats(excluding priming coat)on new 50.00 Sq-mt 86.94

steel and other metal surface with enamel

paint,brushing,interior to give an even shade

including cleaning the surface an even shade

including clean icn the surface of all dirt, dust and

other foreign matter.

17.0 Finishing wall with weather proof (Apex ultimo of 601.20 Sq-mt 113.40

Asian, Jo-tun or equivalent) exterior emulsion paint

on wall surface (two Coats) to give of an required

shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

18.0 Providing and fixing pre-cast concrete kerb stone of 200.00 rmt 358.06

gray cement based concrete block 30cm length,30

cm height and 15cm thick of M250 grade concret as

per approved design and including excavationf or

fixing in proper line and level,filling the joint with

C:M 1:3(1cement:3finesand) etc complete.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

19.0 Providing and fixing pre-cast Rubber Dye/stee lDye 174.65 Sq-mt 680.10

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS15658:2006 including 35mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

20.0 Conveyance charges of earth, lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregate of any kind etc.

a Conveyance charges upto 1 km 100.00 Cu-mt 46.63

b Conveyance charges upto 2 km 50.00 Cu-mt 60.69

c Conveyance charges upto 5 km 150.00 Cu-mt 100.44

d Conveyance charges upto 6 km 150.00 Cu-mt 109.70

e Conveyance charges upto 7 km 150.00 Cu-mt 118.96

f Conveyance charges Above 7 km 150.00 Cu-mt 128.22

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

BILL OF QUANTITIES ( FIRE FIGHTING)

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

1.0 Supply, erection, testing & commissioning of 1.00 No 144,000.00

electrical motor driven MAIN PUMP of horizontal

centrifugal end suction back pull out type capable to

deliver 1680 LPM at 70 MWC.The pump shall be

coupled to TEFC motor with speed of 2900 RPM

and complete set

2.0 Supply, installation, testing & commissioning of 1.00 No 225,000.00

DIESEL ENGINE driven common stand by pump,

horizontal centrifugal end suction back pull out

type, capable to deliver 1680 LPM at 70MWC. The

pump will be coupled Diesel engine radiator water

cooled type with frame.

3.0 Supply, erection, testing & commissioning of 1.00 No 90,000.00

electrical motor driven JOCKEY PUMP of vertical

inline multistage type capable to deliver 180 LPM

at100MWC.The pump will be coupled to TEFC

motor with speed of 2900 RPM and complete set .

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

4.0 COMMON PUMP CONTROL Panel Fabricating & 1.00 No 45,000.00

Supply, installing, testing and commissioning of

compartmentalised common control panel for

Electrical motor driven pumps and Diesel engine

driven pumps.make -NEC INCOMING 1 no. 210 A

TPN MCCB (25 KA). 1 Set of 210 Amps. TPN Al. Bus

bars with colour coded heat shrinkable PVC sleeves.

1 Set of RYB indicating lamps with individual HRC

control fuses. 1 No. 144 Sq.mm 0-210- Amps.

Ammeter with selector selector switch and suitable

rated current transformers.1 No. 0-500 144 Sq.mm

Voltmeter with selector switch. OUTGOING Feeder

for main pump 1 No. 100 A TPN MCCB with back up

fuses Star Delta starter with over load relay, single

phase preventor and indicating lamps with ON / OFF

push buttons. Feeder for main pump -1 No.32 A

TPN MCCB with back up fuses DOL starter with over

load relay, single phase preventor and indicating

lamps with ON / OFF push buttons. 1 No.

Automanual selector switch All the components

shall be housed in a common cubical made of

swg. M.S. sheet with required stiffners ( if required).

The panel will be powder coated of approved colour

both inside & out side. The panel shall have both

bottom & top cable entry provision

5.0 1100 V GRADE POWER / CONTROL CABLES 30.00 Rmt 550.00

Supplying, laying, testing & commissioning of PVC

insulated PVC sheathed, steel armoured, aluminium

/ copper conductor, 100v grade power cables.The

cables shall be laid in tray / Hume pipe / in

trenches/on walls/ floor etc. as required. Make-

kirloskar 3.5C x Reqd sq.mm Aluminium for Main

6.0 1100 V GRADE POWER / CONTROL CABLES 20.00 Rmt 390.00

Supplying, laying, testing & commissioning of PVC

insulated PVC sheathed, steel armoured, aluminium

/ copper conductor, 100v grade power cables.The

cables shall be laid in tray / Hume pipe / in

trenches/on walls/ floor etc. as required. Make-

kirloskar 4 C x Reqd. Sqmm. Aluminium for Jockey

7.0 1100 V GRADE POWER / CONTROL CABLES 50.00 Rmt 105.00

Supplying, laying, testing & commissioning of PVC

insulated PVC sheathed, steel armoured, aluminium

/ copper conductor, 100v grade power cables.The

cables shall be laid in tray / Hume pipe / in

trenches/on walls/ floor etc. as required. Make-

kirloskar 2 C x 1.5 Sqmm. Copper Armoured for

Instrumentation

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

8.0 Supplying, installing, testing and commissioning of 4.00 No 1,350.00

Gun metal chrome finished BALL VALVES with

fittings of screwed end type.Make: Kartar/ Zoloto

9.0 Supplying and fixing of perforated G.I.sheet CABLE 30.00 Rmt. 550.00

TRAY with neccessory angle iron suspension

supports, anchor fasteners etc. complete. Maximum

height of suspension shall not exceed 500 mm.Size

of the tray is 40mm x 200mm x 40mm and 2mm

10.0 Supplying and fixing of perforated G.I.sheet CABLE 15.00 Rmt. 350.00

TRAY with neccessory angle iron suspension

supports, anchor fasteners etc. complete. Maximum

height of suspension shall not exceed 500 mm.Size

of the tray is 40mm x 75mm x 40mm and 2mm

11.0 G.I. EARTHING STRIPS of , strip shall be run on floor 20.00 Rmt. 115.00

/ ceiling / walls, from the equipment to the nearest

Earth pit with neccessory accessories as required. (

Earth pit shall be executed by other agencies).

25mm x 3mm thick

12.0 G.I. EARTHING STRIPS of , strip shall be run on floor 15.00 Rmt. 225.00

/ ceiling / walls, from the equipment to the nearest

Earth pit with neccessory accessories as required. (

Earth pit shall be executed by other agencies).

50mm x 6mm thick

13.0 Supplying, installing, testing and commissioning of 80.00 Rmt 650.00

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) & IS

3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawing. 150mm nominal dia

14.0 Supplying, installing, testing and commissioning of 80.00 Rmt 590.00

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) & IS

3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawing. 80mm nominal dia

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

15.0 Supplying, installing, testing and commissioning of 40.00 Rmt 500.00

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) & IS

3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawing. 50mm nominal dia

16.0 Supplying, installing, testing and commissioning of 2.00 No 6,500.00

C.I. CHECK VALVES as per API stds., swing check type

with required flanges, nuts, bolts and gaskets etc.

complete. 150 mm nominal dia

17.0 Supplying, installing, testing and commissioning of 2.00 No 5,100.00

C.I. CHECK VALVES as per API stds., swing check type

with required flanges, nuts, bolts and gaskets etc.

complete. 100 mm nominal dia

18.0 Supplying, installing, testing and commissioning of 2.00 No 3,800.00

C.I. CHECK VALVES as per API stds., swing check type

with required flanges, nuts, bolts and gaskets etc.

complete. 50 mm nominal dia

19.0 Supplying, Installing, testing and commissioning CI 2.00 No 4,500.00

Gate VALVES slim seal standared lever operated

type confirming to IS Standard with required

flanges, nuts, bolts etc. complete. 150mm nominal

20.0 Supplying, Installing, testing and commissioning CI 2.00 No 4,000.00

Gate VALVES slim seal standared lever operated

type confirming to IS Standard with required

flanges, nuts, bolts etc. complete. 100mm nominal

21.0 Supplying, Installing, testing and commissioning CI 1.00 No 6,500.00

Gate VALVES slim seal standared lever operated

type confirming to IS Standard with required

flanges, nuts, bolts etc. complete. 80mm nominal

22.0 Supplying, Installing, testing and commissioning CI 1.00 No 5,000.00

Gate VALVES slim seal standared lever operated

type confirming to IS Standard with required

flanges, nuts, bolts etc. complete. 50mm nominal

23.0 Supplying, installing and commissioning C.I. 2.00 No 6,000.00

FLANGED "Y" TYPE STRAINER with SS mesh, flanges,

nuts, bolts, gaskets etc. complete.(Kartar) 150mm

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

24.0 Supplying, installing and commissioning C.I. 2.00 No 4,000.00

FLANGED "Y" TYPE STRAINER with SS mesh, flanges,

nuts, bolts, gaskets etc. complete.(Kartar) 80mm

25.0 Supplying, fabricating, STRUCTURAL STEEL 400.00 Kg 80.00

SUPPORTS such as MS channels, angles, flats, rods

as required at site with anchor fasteners, clamps,

threaded rods, nuts, bolts, washers etc. complete

26.0 Supplying, installing, testing and commissioning of 150.00 Rmt 360.00

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) and

IS 3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawings. 80mm nominal

diaSupplying, installing, testing and

commissioning of M.S.G.I. PIPES 'C' class

confirming to IS 1239 (H) and IS 3589,6mm

thick, with specials such as Painting, Tees,

elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable

supports etc, as per drawings. 80mm

nominal diaSupplying, installing, testing

and commissioning of M.S.G.I. PIPES 'C'

class confirming to IS 1239 (H) and IS

3589,6mm thick, with specials such as

Painting, Tees, elbows, flanges. Including

cutting, Welding, fixing in / on walls, ceiling

by using suitable supports etc, as per

drawings. 80mm nominal dia

27.0 Supplying, installing, testing and commissioning of 150.00 Rmt 290.80

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) and

IS 3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawings. 65mm nominal

diaSupplying, installing, testing and

commissioning of M.S.G.I. PIPES 'C' class

confirming to IS 1239 (H) and IS 3589,6mm

thick, with specials such as Painting, Tees,

elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable

supports etc, as per drawings. 65mm

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

28.0 Supplying, installing, testing and commissioning of 140.00 Rmt 228.00

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) and

IS 3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawings. 50mm nominal

diaSupplying, installing, testing and

commissioning of M.S.G.I. PIPES 'C' class

confirming to IS 1239 (H) and IS 3589,6mm

thick, with specials such as Painting, Tees,

elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable

supports etc, as per drawings. 50mm

29.0 Supplying, installing, testing and commissioning of 140.00 Rmt 152.50

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) and

IS 3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawings. 40mm nominal

diaSupplying, installing, testing and

commissioning of M.S.G.I. PIPES 'C' class

confirming to IS 1239 (H) and IS 3589,6mm

thick, with specials such as Painting, Tees,

elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable

supports etc, as per drawings. 40mm

30.0 Supplying, installing, testing and commissioning of 140.00 Rmt 77.70

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) and

IS 3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawings. 32mm nominal

diaSupplying, installing, testing and

commissioning of M.S.G.I. PIPES 'C' class

confirming to IS 1239 (H) and IS 3589,6mm

thick, with specials such as Painting, Tees,

elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable

supports etc, as per drawings. 32mm

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

31.0 Supplying, installing, testing and commissioning of 100.00 Rmt 70.00

M.S.G.I. PIPES 'C' class confirming to IS 1239 (H) and

IS 3589,6mm thick, with specials such as Painting,

Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable supports

etc, as per drawings. 25mm nominal

diaSupplying, installing, testing and

commissioning of M.S.G.I. PIPES 'C' class

confirming to IS 1239 (H) and IS 3589,6mm

thick, with specials such as Painting, Tees,

elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable

supports etc, as per drawings. 25mm

32.0 Providing and fixing sprinkler of 15 NB quartzoid 180.00 No 203.00

type sprinkler head and set to operate at 68 deg

temperature of approved makes.Make-Tyco/ HD/

33.0 Stainless steel corrugated flexible pipe(hose) for 100.00 No 1,357.00

dropping sprinklers below false ceiling, pipe shall be

16 bar pressure rating and 1500 mm long 25 mm

dia with union / reducer collar, clamps etc. as

34.0 Supplying, installing and commissioning of FIRE 2.00 No 14,112.80

BRIGADE INLET connection of 4 way with 4 nos.

mm dia. . Pipe manifold and connected to mains.

35.0 Supplying and fixing approved make 25mm dia. 3.00 No 1,265.00

With automatic AIR RELEASE VALVE with unions

36.0 Supplying, fabricating, STRUCTURAL STEEL 400.00 Kg 400.00

SUPPORTS such as MS channels, angles, flats, rods

as required at site with anchor fasteners, clamps,

threaded rods, nuts, bolts, washers etc. complete

37.0 Pressure Gauge 3.00 No 1,725.00

38.0 Pressure Switch Make-indfoss 4.00 No 2,300.00

39.0 Saftey Valve 2.00 No 9,000.00

40.0 Supplying, erecting and commissioning of YARD/ 2.00 No 7,599.20

LANDING HYDRANTS comprising of the following in

the Fire duct; Make-Safe Guards / Omex 63mm dia

instantaneous pattern Single Headed Hydrant Valve

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

41.0 Supplying, erecting and commissioning of YARD/ 2.00 No 4,752.95

LANDING HYDRANTS comprising of the following in

the Fire duct; Make-Safe Guards / Omex 1 lengths

of 15 M long, 63mm dia RRL hose with couplings

and Hoses shall be rolled & hug tosuitable M.S.

structural support fixed inside the Fire duct wall.

42.0 Supplying, erecting and commissioning of YARD/ 2.00 No 5,750.00

LANDING HYDRANTS comprising of the following in

the Fire duct; Make-Safe Guards / Omex 1 no. Gun

metal Branch Pipe with nozzle

43.0 Supplying, erecting and commissioning of YARD/ 3.00 No 7,056.40

LANDING HYDRANTS comprising of the following in

the Fire duct; Make-Safe Guards / Omex Hose Reel

Drum of swinging type with 19mm dia Rubber

braided hose of 36.5M. length with Gate/BALL valve

and Shut off nozzle, complete.

44.0 Supplying, erecting and commissioning of YARD/ 1.00 No 17,030.35

LANDING HYDRANTS comprising of the following in

the Fire duct; Make-Safe Guards / Omex Hose

cabinet Door (Internal) made of 'M.S.Sheet with

powder coated finish of 2100mm x 900mm in size

and mounted on Wall.

45.0 Supplying, erecting and commissioning of YARD/ 2.00 No 4,025.00

LANDING HYDRANTS comprising of the following in

the Fire duct; Make-Safe Guards / Omex Extenal

yard hose cabinet made of 14 SWG 'M.S.Sheet with

powder coated finish of 750mm x 600mm x 250mm

in size and mounted on structural support.

46.0 SITC CO2 - 4.5 Kg Fire Extinguisher. 15.00 Nos. 4,500.00

47.0 SITC CO2 - 2 Kg Fire Extinguisher. 10.00 Nos. 2,700.00

48.0 SITC ABC- 5 Kg Powder-MAP-90 Fire Extinguisher. 15.00 Nos. 2,500.00

49.0 Supply, Installation, Testing & Commissioning of 15.00 Nos. 1,500.00

Fire Exit Sineges With Arrow. (4 INCH X 6 INCH)

50.0 (8) Providing & Fixing four bucket stand along with 15.00 Nos. 1,200.00

bucket compete.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

51.0 (1) Providing and fixing 2kg. Stored pressure type, 20.00 Nos. 2,000.00

pressure gauge, gross weight 4.9kg, empty weight

2.9kg, can height 440mm, diameter 140mm,

discharge time less than 9 sec., controllable

discharge mechanism (squeeze grip with easy snap

safety seal), range minimum 4 meters, applicable on

class A,B and electrically started fire, very effective

on class B fire, B Rating 144B, can construction:

deep drawn & co., Mig welded , valve construction:

Forging and Mechining, Internal coating of powder

coating, sheet metal thickness: 1.60mm, 5 years

warranty. with installer system with superior quality

EPDM rubber hosepipe etc., complete. ( 2kg.

Monnex Powder) ABC

52.0 (2) Providing & fixing 4kg. Stored pressure type, 20.00 Nos. 4,000.00

pressure gauge, gross weight 7.4kg, empty weight

3.4kg, can height 480mm, diameter 160mm,

discharge time less than 13 sec., controllable

discharge mechanism (squeeze grip with easy snap

safety seal), range minimum 4 meters, applicable on

class A,B and electrically started fire, very effective

on class B fire, B Rating 144B, can construction:

deep drawn & co., Mig welded , valve construction:

Forging and Mechining, Internal coating of powder

coating, sheet metal thickness: 1.60mm, 5 years

warranty. with installer system with superior quality

EPDM rubber hosepipe etc., complete. ( 4kg.

Monnex Powder) ABC

53.0 Providian’s Escape Signage:- Photoluminescent rigid 20.00 Nos. 517.50

plastic, 2mm thickness, printed on high quality glass

paint with UV resistance, 5 year warranty, material

used-non radioactive, nonphophorous, non toxic

and lead free. Available in different types & sizes,

time after removing the light source (in minutes):-

60 minutes, luminescent intensity(milicandelas*per

square metermcd/ sqm):30 mcd/sqm. Luminescent

intensity greater than 0.32 mcd/sqm, period of light

decay* (in minutes) :3100 (1) “Fire Exits” ( Size 365 x

119 x 84 mm or nearest )

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

54.0 (2)Fire exit signs of standard size ( Size 450 x 200 x 10.00 Nos. 314.82

84 mm or nearest )(photoluminous type.(glowing in

dark type)Providing and fixing portable fire

extinguishers of approved make ISI marked of

following Capacity at the places shown on Drawing

&mentioned in CFO letter

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

BILL OF QUANTITIES ( ELECTRICAL WORK)

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

1.0 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR/HRFR PVC insulated

multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories 62.00 Pt. 505.05

erected concealed in wall/ceiling complete

2.0 Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with earth

continuity and necessary connection with primary light

with accessories erected on Metal / PVC / wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic

sheet for open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories 69.00 Pt. 174.30

erected concealed in wall/ceiling complete

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

3.0 Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade ZHFR/HRFR PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories 30.00 Pt. 701.40

erected concealed in wall/ceiling complete

4.0 Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type

of accessories.

4.1 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories 20.00 Pt. 530.25

erected concealed in wall/ceiling complete Cat. III

4.2 [II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories 24.00 Pt. 774.90

erected concealed in wall/ceiling complete Cat. III

4.3 [III] For 16A Plug and 16 amp switch with 2-4

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories 1.00 Pt. 906.15

erected concealed in wall/ceiling complete Cat. III

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

5.0 Point wiring for on board Looped Plug with 6A 17.00 Pt. 267.75

Modular type switch & 5 pin socket erected on PVC

/ Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with

following type accessories Cat. III

6.0 Point wiring for Two Way Controlled Light Point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of .ISI marked 1.1 KV grade ZHFR/HRFR

PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories 4.00 Pt. 627.90

erected concealed in wall/ceiling complete Cat. III

7.0 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge.

7.1 (1)One No. SP 6 Amp.

Cat.III 2.00 each 157.50

7.2 (2) One No 5 pin plug

Cat.III 2.00 each 157.50

7.3 (5) Electronic hum Free four or more steps EME Fan

Cat.III 25.00 each 414.75

7.4 (9) 16 Amp. SP one way switch

Cat.III 4.00 each 187.95

7.5 (10) 6/16Amp. Universal socket

Cat.III 4.00 each 207.90

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

8.0 Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base

frame covered with textured/metallic /white front

plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Cat.III 20.00 Ea. 1,178.10

Section :- 1- 3 / Conduits & Pipes

9.0 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in

approved manner as directed

10.0 Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes.

UPVC TRUNKING SYSTEM

11.0 Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof

confirming BS with necessary end caps Internal and

external bend, flat bends, coupler, tee etc..All

necessary accessories and measuring of following

a (1) 75 mm x 50 mm trunking 4.00 rmt 275.00

b (2) 100 mm x 50 mm trunking 20.00 rmt 424.00

12.0 Supply,Installation,Testing and Commissioning of 10.00 Ea. 1,250.00

250X250X50MM Floor Juction Box With SS Floor

Plate as per engineer in charge.

Section 1-4 Mains & Wires

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

13.0 Providing and erecting Mains with 1.1 KV grade

ZHFR/HRFR PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor ZHFR/HRFR PVC

insulated stranded wire of green colour for earth

continuity of following size

(A) With medium class Rigid PVC pipe and

a (a) 2 wire 1.5 sq. mm 800.00 rmt 65.10

b (b) 2 wire 2.5 sq. mm 1350.00 rmt 86.10

14.0 providing and erecting Mains with 1.1 KV grade

ZHFR/HRFR PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor ZHFR/HRFR PVC insulated

stranded wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and

a (a) 2 wire 4 sq. mm 350.00 rmt 116.55

b (g) 4 wire 4 sq. mm 10.00 rmt 187.95

c (h) 4 wire 6 sq. mm 35.00 rmt 270.90

15.0 providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required.

a (e) One wire 6.00 sq. mm 70.00 rmt 56.00

b (i) One wire 35.00 sq. mm 30.00 rmt 298.00

16.0 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

a (e) 1.50 Sq.mm 3 core round PVC sheathed 200.00 rmt 46.00

b (h) 2.50 Sq.mm 3 core round PVC sheathed 200.00 rmt 75.00

SECTION 3-1 SWITCHGEARS WITH REWIRABLE

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

17.0 Providing and erecting Approved make Four pole 2.00 each 6,112.00

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only

18.0 Providing and erecting Approved make Earth fault

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing

19.0 Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS

(C)100-125A Cat-lll 1.00 each 7,713.00

SECTION 3-10 / MINIATURE CIRCUIT BREAKERS.

20.0 providing and erecting Miniature circuit breaker 50.00 each 111.00

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

21.0 Providing & erecting 240 V MCB double pole switch

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity

a (A) 6 to 32 Amp. Cat.III 2.00 each 297.00

b (B) 40 Amp. Cat.III 5.00 each 327.00

22.0 Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity

a (b)40 Amp. Cat.III 1.00 each 662.00

b (c)63 Amp. Cat.III 7.00 each 730.00

23.0 Providing & erecting 415 V MCB three Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity

a (b)40 Amp. Cat.III 1.00 each 641.00

b (c)63 Amp. Cat.III 0.00 each

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

SECTION 3-11 / MCB DISTRIBUTION BOARDS

24.0 Half / One Module Blanking Plate of Standard Size. 10.00 each 9.00

25.0 Plastic enclosure fitted with DIN rail suitable for 2.00 each 107.00

incorporating Three /Four nos. MCB

26.0 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

A (A) single phase incoming and horizontal single

(b) sheet steel double door (IP-43)

(iv)12 way 2.00 each 1,478.00

B (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type

(b) sheet steel double door

(iii)8 way 1.00 each 3,379.00

SECTION 3-12 EARTH LEAKAGE CIRCUIT BREAKERS

27.0 Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having

characteristic of quick action & tripping with all

advance feature &

a (i) 25 Amps.DP 4.00 each 1,950.00

b (iii) 63 Amps. DP Cat. III 4.00 each 2,628.00

28.0 Approved make ELCBs / RCCBs conforming to IS: 2.00 each 3,010.00

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on 3 phase and neutral 415V. having

characteristic of quick action & tripping with all

advance feat (iii) 63 Amps. FP

SECTION 3-13 / DANGER NOTICE BOARDS.

29.0 Providing and erecting metallic vitrified danger 3.00 each 69.00

notice board for MEDIUM VOLTAGE installation to

be erected as per IS.

SECTION 3-14 EARTHING

30.0 Providing and erecting required size HOT deep 90.00 kg 77.00

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc. using

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

31.0 Providing and erecting Annealed bare Copper wire 8 15.00 kg 787.00

32.0 Providing and erecting HOT deep Galvanised iron 19.79 kg 77.00

strip wire 8 to 16 SWG.

33.0 Supplying & erecting in earthpit of minimum bore

dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per

IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate including value of earth resistane of

A [C] For Electrical Installation covering Transformer 12.00 each 10,489.00

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other

than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

34.0 Providing one bag of 25 Kg. Additional Back Filling 12.00 each 700.00

Compound (BFC) suitable for safe earthing device.

SECTION 3-16 / CUPBOARDS.

35.0 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be

supplied with following approved manufacturers

with following size.

(B) The standard companies switch gear shall be

used and only manufacturers at CPRI approved

(i) with 350mm depth 6.28 sqm 14,755.00

36.0 Supplying and erecting approved make panel 1.00 Ea. 1,263.00

mounting type Digital Voltmeter having 3 digits LED

display, 0 to 750 AC Volts range erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

37.0 Supplying and erecting approved make panel 1.00 Ea. 1,543.00

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all connection,

wiring etc .with manufacturers calibration

38.0 Supplying and erecting Ammeter / Voltmeter 2.00 Ea. 314.00

selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections.

39.0 Providing & erecting L.T. Current Transformer with 4.00 Ea. 272.00

bar primary 50/5 to 1000/5 ratio 15 VA burden

erected in existing CRCA box duly secured with

insulating materials connected to the meter

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

40.0 Supplying & erecting approved make Power Factor 1.00 Ea. 5,052.00

Meter 150mm dia flush/projection type/ balanced &

unbalanced load to work with appropriately

provided CT’s 100/5A to 400/5A ratio & other

accessories complete erected in M.S. box &

connected to the circuit by means of PVC copper

41.0 Supplying and erecting approved make suitable 9.00 Ea. 43.00

panel indicator LED type lamp, lens cover, complete

erected with necessary connections.

42.0 Providing , erecting , fabricating the M.S. structure 100.00 kg 77.00

as per requirement on site incorporating proper size

of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide

with erection on site as per direction of engineer in

charge with necessary grouting, cementing,

plastering & finishing complete.

SECTION 4-3 / ARMOURED ALUMINIUM CABLES

43.0 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

A (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 80.00 rmt 182.00

B (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 60.00 rmt 375.00

SECTION 4-4 ARMOURED COPPER CABLES

44.0 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

A (A) 4 core 2.5 Sq. mm 150.00 rmt 269.00

B (C) 4 core 6 Sq. mm 85.00 rmt 505.00

SECTION 4-6 / CABLE GLANDS.

45.0 Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

B (B) 2 to 4 core 6 Sq. mm 4.00 Ea. 38.00

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

46.0 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following

size of cables.

SECTION 4-7 CABLE LUGS.

47.0 Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

48.0 Solderless crimping type Copper lugs conforming to

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner.

SECTION 4-5 / MISCELLANEOUS.

49.0 Making trench in soft soil of suitable width of 90 cm 20.00 rmt 55.00

deep for laying cable or locating the fault all over

the run and back filling the same and making the

surface as normal ground.

50.0 Covering of cable with second class bricks or cement 20.00 rmt 139.00

tiles laid cover the cable crosswise & also on both

sides with covering of 7. 5 Cm. layer of sand above

& below cable (16 bricks per meter)

51.0 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable

A (A)50 mm outer dia 20.00 rmt 62.00

SECTION 4-11 METAL PERFORATED CABLE TRAYS

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

52.0 Providing and fixing approved make Perforated C

type cable tray. Made from sheet steel. The cable

tray should be single or double bended as per

required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS 2629/4759.

with max 17.5% perforation with coupler plate /

Fish plate and GI hardware like nut - bolt and

washers etc. erection with necessary support(

included) as per Specification and as per instruction

of engineer in charge..

SECTION 5-1 / CEILING FANS AND ACCESSORIES

53.0 Providing and erecting Approved make Ceiling fan 25.00 each 1,581.00

with double ball bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in

SECTION 5-2 FAN ACCESSORIES

54.0 Supplying and erecting 19 / 20 mm. nominal bore 25.00 Mtr. 107.00

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

55.0 Supplying & erecting Fan Hook of 10 mm M.S. 25.00 each 43.00

Round bar grouted in RCC slab with Making the site

56.0 Supplying & erecting fan hook box of 10 mm M.S. 25.00 each 107.00

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

57.0 Providing Fan clamp of 30 x 5 mm flat of required 25.00 each 98.00

length & 10 mm M.S. Bolt & Nuts erected with

necessary hook of 10 mm M.S. Round Bar.

58.0 Providing 2.5mm.thick laminated acrylic sheet to 25.00 each 18.00

cover the fan hook or Fan box.

59.0 Supplying & erecting approved make low noise 5.00 each 1,353.00

decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame. 200mm

with 1350RPM Cat.II

60.0 Providing suitable M.S. louver shutter of the Exhaust 5.00 each 365.00

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

61.0 Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium

duty having following dia size and maximum speed

[A] 305 mm dia 900 RPM Cat.II 2.00 each 2,034.00

SECTION 8-10 / POWER CAPACITORS

62.0 Supplying & erecting bank of all polypropylene 20.00 KVAR 690.00

condenser (APP type) with standard capacity of

2,3,5,7, 10,12.5 & 15 KVAR units of P.F. correction

for operation on 3 phase 50 c/s, 400 /440V (+ / -

10%) with externally discharging resistance,

earthing terminal & built on angle iron of channel

iron frame work and provided with terminal cover

box. Complete erected on provided iron bracket or

on floor duly tested by license.

SECTION 2-16 / LED LUMINARIES

63.0 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

A (A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

Cat-lll 10.00 EACH 370.00

B (v) 36-40 Watts, Surge-2 KV, IP-20, conventional

Cat-lll 8.00 EACH 530.00

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

64.0 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

A (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

Cat-lll 61.00 Ea. 584.00

B (B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

(H) Mirror Light 9 Watts, wall mounted minimum 1 8.00 Ea. 309.00

65.0 Providing and erecting decorative wall bracket 25.00 Ea. 1,696.00

fittings complete with LED lamp and rust free

fittings components mounted in chrome finish

housing with holder ,clear/opaque glass diffuser

complete erected with lead wires with minimum

wattage capacity as per instruction engineer

incharge/architect/authority .cat-III

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

66.0 Supplying and erecting LED indoor fittings with LEDs 21.00 Ea. 4,850.00

of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

1200MM Long Linear type Hanging light with

mounting arrangement etc.

STREET LIGHTING

67.0 Supplying and erecting B class galvanised iron pipe 10.00 Ea. 340.00

32 mm outside dia 45 cm long duly welded on

cm x 20 cm x 3 mm thick M.S. base plate, erected

on wall or corner for mounting street light luminaire

with necessary hardware materials duly painted.

68.0 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

A (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(i) above 36 to 48 watts 5.00 Ea. 3,312.00

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

B (B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(vi) above 160 to 200 watts 5.00 Ea. 9,552.00

69.0 Supplying & erecting approved make Digital time 1.00 Ea. 3,137.00

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

70.0 Supplying & erecting power contactor ,AC3 duty for

time switch complete erected as per direction Cat III

CCTV Surveillance & Networking System

71.0 SITC of 2 MP IP BASED FIXED DOME CAMERA: 8.00 Nos 4,782.00

Dome camera, 1/2.8" CMOS, F2.0, Fixed Iris, Digital

WDR, 30m IR, 0.02Lux, 1920x1080@30fps, Fixed 2.8mm

Lens, Built-in Mic, IP66, PoE, Metal+Plastic housing,

Support tripwire and perimeter with Back box and

mounting accessories

72.0 SITC of 2 MP IP BASED FIXED BULLET CAMERA: 6.00 Nos 5,249.07

Bullet camera,1/2.8" CMOS, F2.0, Fixed Iris, Digital WDR,

50m IR,Fixed 4 mm Lens, 0.02Lux, 1920x1080@30fps,

Built-in Mic, IP67, PoE, Metal+Plastic housing,Support

tripwire and perimeter with Back box and mounting

73.0 SITC of 16 Ch 4 SATA Supported NVR: 1.00 Nos 18,200.00

16-ch, 400Mbps/400Mbps, recording resolution up to 12MP,

decoding ability 3×12MP, 4*8MP, 16*1080p, 32*720p, video

output: 1 HDMI & 1VGA simultaneous output, alarm I/O 16/4,

USB interface: 1xUSB 3.0 1xUSB 2.0, RAID:

JBOD,RAID0/1/5/6/10, ANR, N+M

74.0 SITC of Hard disk -8 TB ( for Recording 24 hour , 30 1.00 Ea. 21,136.11

75.0 Supplying & erecting approved make LAN cable of

following size in existing pipe as per directionSupplying

& erecting approved make LAN cable of following size in

existing pipe as per direction

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

76.0 SITC of Face Plate - Single (Keystone Jack,square) 10.00 Ea. 90.00

[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

77.0 SITC of Jack Cat 6 Keystone UTP 20.00 Ea. 100.00

[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

78.0 SITC of Jack Cat 6 Keystone UTP. 50.00 Ea. 160.00

79.0 SITC of Patch Panel Cat 6 UTP Keystone Type- 24 3.00 Ea. 4,357.00

Port-Fully Loaded.

80.0 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 50.00 Ea. 155.00

30U' Snag less .

81.0 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 50.00 Ea. 199.00

[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

82.0 SITC of 24 x 10/100/1000BASE-T PoE ports 3.00 Ea. 31,680.00

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode”

management user interface

193 W PoE budget .

83.0 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate 1M , modules

erected with necessary connections as per site

situation directed by Engineer In charge.

(8) Computer RJ-45 socket Cat.III 50.00 Ea. 152.00

84.0 Supply, Installation Testing & Commissioning 5 Mtr. 1.00 Ea. 820.00

HDMI Interface Cable as per the detailed

Specifications supports transmission of 4K Signals as

per the detailed Specifications

85.0 Supply, Installation Testing & Commissioning 15 2.00 Ea. 1,760.00

Mtr. HDMI Interface Cable as per the detailed

Specifications supports transmission of 4K Signals as

per the detailed Specifications

86.0 Supply,Installation,Testing and Commissioning of 32 1.00 Ea. 16,500.00

inch LED monitor.

87.0 Supply,Installation,Testing and Commissioning of 9U 1.00 Ea. 8,500.00

Network rack with 5 socket power strip & 2 Nos

Exust fan and standard hardware set etc.

FIRE ALARM SYSTEM

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

88.0 SITC of Microprocessor based Net-workable 1.00 Nos 105,800.00

Analogue Addressable Fire Alarm Control Panel.

The Panel shall be compliant with EN54-2, EN54-4

and approved by LPCB. The Fire Alarm Control Panel

shall have inbuilt one loop and expandable capacity

upto 2 loops. The Panel must have large graphic

display. The Panel must also have the capability to

take Addressable Intelligent Wired and Wireless

Devices on same loop. Each loop shall have a

capacity of 127 analogue Addressable devices and

127 Base sounders/Base Sounder Beacons. The

Panel shall have 240 V AC power supply along with

automatic Battery Charger.

Approved by LPCB.

89.0 SITC of Analogue Addressable Multi- Sensor which 24.00 Nos 2,650.00

is fully compatible with Analogue Addressable

Protocol,having removable high performance

chamber with Twin fire LED's allow 360 degree

viewing, User selectable sensitivity modes 1% to

4.5% obs/m, Incorporate Optical and dual Heat

elements, lock mechanism (sensor to base),

Electronically addressed, Pulsing/non-pulsing

controlled from panel. Approved by LPCB & VdS. .

90.0 SITC of sensor common mounting base, includes 24.00 Nos 360.00

stainless steel contacts, slim profile - only 8mm,

quick connection via square cable clamps, facility for

remote indicator, Approved by LPCB.

91.0 SITC of Intelligent Loop Powered Wall Sounder 4.00 Nos 7,400.00

Beacon, Variable Sound Output 90 ~ 102 dB(A) (±2

dB(A)) output at 1 metre, High Intensity LED

technology, 51 User-Selectable Tones (all tones

EN54-3 compatible). Approved by LPCB & VdS.

92.0 SITC of Analogue Addressable Single Input Module. 2.00 Nos 3,850.00

which Includes a single monitored input, flying leads

for easy installation. Electronically addressed,

Approved by LPCB & Vds..

93.0 SITC of Analogue Addressable Single Output Module 2.00 Nos 3,450.00

. which Includes a single output, flying leads for easy

installation. Electronically addressed, Approved by

94.0 SITC of Manual Call Point approved to EN54- 4.00 Nos 3,850.00

11:2001, Approved by LPCB Easy to install, push-fit

wiring terminals.

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

95.0 Supply installation of ISI Marked 2 core x 1.5 mm2, 710.00 mtr 110.00

Multistrand Copper, FRLS Armoured cable, RED in

Colour, laid on surface with GI saddle-spacers every

0.3 meters. Complete with GI Junction Box, lugs,

cable compression glands, cable tags and Ferruling.

96.0 Providing & erecting water cooler having storage 2.00 Ea. 55,340.00

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet

& outlet connection. The body of water cooler will

be made from Stainless Steel.

97.0 Supply and erecting of 35 watt Water Purifier with 2.00 Ea. 18,500.00

Intelligent purity sensor system: it continuously

scans the water to give 100 percent safe water, E-

boiling: this technology purifies water completely

and destroys all known disease-causing bacteria and

virus to make every drop as safe and pure, High

flow rate: the aquaguard hiflo delivers a high flow

rate of 3 litres per minute delivering more water in

lesser time, Mineral preserver system: electronic

impulses are produced to prevent scaling of the

quartz tube, thereby ensuring that precious

minerals and nutrients are retained in the water,

Power: 35 watts; operating voltage: 230 volts,

SEFTY EQUIPMENTS

98.0 Providing and fixing printed instruction chart both in 1.00 Ea. 129.00

English and Gujarati and duly framed with front

glasses, for treatment of person suffering from

Electric shock with minimum 50" diagonally size.

99.0 Supplying rubber matting of following thickness as

per IS:15652/IEC

(a)3mm 2.00 Sq.Mtr 763.00

100.0 Supplying stand first AID box with antiseptic cream, 2.00 Ea. 297.00

medicine for use on wounds due burn, crepe

bandage, gauge bandage, medicated ready to use

bandage (Band-aid) adhesive tape for medicinal

user, Scissors, anti-septic solution (Savlon or similar)

etc. (All above contents shall be of standard makes)

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

101.0 Supplying FIRE bucket round bottom of 9 litres 2.00 Ea. 212.00

capacity made out of 24 gauge G.I. sheet with extra

handle at bottom duly painted white inside and Red

out side with FIRE mark, filled with dry-sand and

kept on existing stand provided or hung on wall

102.0 Wall hook 22 to 25 cms. projection for keeping fire 2.00 Ea. 60.00

buckets made out of 15 mm dia. M.S rod grouted in

wall to a depth of minimum 15 cms.

103.0 Supplying & erecting D.C.P. type fire extinguisher for

following capacity cartridge type with gun metal cap

150 gram CO2 gas cartridge, powder and brackets

confirming to IS 2171 1985 and complete erected

with necessary clamps made from 50 x 6 mm M S

Flat with nuts and bolts grouted in wall complete.

[A] For 5 Kg Capacity 1.00 Ea. 1,696.00

104.0 Supplying & erecting carbon dioxide (CO2) fire

extinguisher user of following capacity with

necessary clamps made from 50 x 6 mm M.S. Flat

with nut & bolts grouted in wall complete.

[A] For 4.5 Kg Capacity 1.00 Ea. 6,526.00

105.0 S.I.T.C. submersible pump set suitable for bore of

100 mm. dia. or more having three phase motor

capacity not more than 3 H.P. of different range

with following capacity . Lifting and Lowering taken

A (A) (20 stage) 170 to 185 LPM discharge at 57 to 48 1.00 Ea. 20,695.00

mtrs. Respectively head suitable for 50 mm dia.

delivery pipe Cat.III

106.0 Providing & erecting open well horizontal mono

block pump set with cast iron body, complete for

three phase submersible motor having

A [A] For 1.5 HP 3 phase open well horizontal mono 2.00 Ea. 10,183.00

block pump set suitable for 190 LPM @ 20 mtr head

suitable for 40 mm dia delivery pipe

Item Description of Item (With brief Quantities Unit Rs In Amount

No. specificationand reference to Figures

book of Specifications)

107.0 Supplying and erecting Direct on line starter with 30 3.00 Ea. 2,147.00

Amp. (resistive @ 230v) power relay and with 2 to

5/ 4 to 10 / 8 to 20 amp. Range C.T. Operated

electronic overload relay in engineering grade

plastic enclosure for 3 ph 415v 50 HZ A.C. motor up

to 7.5 HP with high voltage protection (above 480 v)

and under voltage protection (below 330 v) current

sensing single phasing protection. Reverse phasing

protection, inverse current characteristic overload

protection with indication for On, OL, HV,LV SPP in a

single unit with feather touch start / stop push

button, high temperature with standing Bakelite

terminals complete erected on P.W. Block with

necessary connection. [Cat.II]

Liason / Follow UP with Supply Co.

108.0 Liason / Follow UP with Supply Co. 1.00 Job 5,000.00

Filling the necessary application to supply co.

following up and getting the supply filling the

necessary test report to the supply co. inclusive. All

official fees including security deposits will be paid

by the client and out of pocket expenses shall be of