REPAIR MAINT OF PUMP SET MOTORS STARTER CLARIFOCCULATOR INCLUDING PANEL BOARDS AND MISC WORKS AT WATER SUPPLY INSTALLATIONS AT NORTH OF RAILWAY LINE UNDER GE MISSAMRI

Servicing/Overhauling of 3 Phase 415 Volts 1440 RPM 75 HP capacity Induction Motor (MAKE : KIRLOSKAR/ JYOTI) installed at Old Pump House alongwith following others repairs :- (a) Taking out Motor from its Position by decoupling from Pump and disconnecting all Cable Connections. (b) Dismantling of induction Motor complete Part by Part carefully, testing all Coils, degreasing bearing and display all the Parts without damaging any portion for inspection of Engineer-in-Charge to ascertain the Serviceability of existing Parts. (c) Heating & Varnishing to Stator with super quality varnish and dried out properely with external heat as ordered and as directed. (d) Reassembeling the Motor complete with all existing Serviceable Parts obtained , greasing the Bearing with bearing grease and new Parts as ordered by Engineer-in-Charge (New Parts shall be measured and paid separately under relevant Item here-in after) (e) Reinstall the Motor at its existing Position, couple with the Pump connecting all Cable connections and testing on completion complete all as specified and as directed. Note :- (i). Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (ii). .Any unforeseen minor repair and minor parts ( Total cost less than Rs 200 ) that are not covered under Item No-1 to 5 but required to complete the repair work / smooth functioning of Motor shall be deemed to be included with the unit rate .Transportation of Stator / Rotor parts for machining , rewinding at lathe shop at Tezpur / Rangapara is also deemed to be included with unit rate. (iii). Rewinding of stator / rotor of motor, any machine work where involved shall be measured and paid separetely against relevant item of this schedule. (iv) Documentry proof for repair of motor like photos of unservicable and new part, Gatepass shall be submit for claim of payment.

Supply only DE ( Driver End ) Bearing No- NU318C3 or as per existing size suitable for 75 HP Motor against Item No. 1 here-in-above, complete all as specified and as directed.

Supply only NDE ( Non Driver End ) Bearing No- 6314C3 or as per existing suitable for 75 HP Motor against Item No. 1 here-in-above, complete all as specified and as directed.

Supply only Bakelite connection terminal plate with brass nuts bolts and washers suitable for 75 HP Motor against Item No. 1 here-in-above, complete all as specified and as directed.

Rewinding burnt coils of Induction Motor stator of capacity 75 HP obtained from Item Ser No-1 here-in-above with super enamelled copper winding wire as per existing size and guage to achieve the required /specified RPM including taking out old unserviceable winding, cleaning/ repairing damaged slots, complete all as specified and as directed.

Servicing / Overhauling of Electric driven Vertical / Horizontal NC split casing Pump-set having discharge 50000 GPH/ 60000 GPH, H 61-M ( Make- Kirloskar ) coupled with induction Motor 125HP/ 150 HP capacity installed at old Jalkendra, Intermediate Pump house along with following others repairs :- a). Taking out Pump from its Position by decoupling from Motor and disconnecting all suction /delivery water connections , setting aside Pump from base plate , b). Dismantling of Pump complete part by part carefully , degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in-Charge to ascertain the serviceability of existing parts. c). Replacement of Gasket set and gland packing rope. d). Reassembeling the Pump complete with all existing serviceable parts obtained, greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge.( New parts shall be measured and paid separately under appropraite Item here-in-after) e) Reinstall the Pump at its existing Position, couple with the Motor and connecting all suction delivery water connections and testing on completion complete all as specified and as directed. Note :- (i). Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (ii). Any unforeseen minor repair and minor parts ( Total cost less than Rs 200 ) that are not covered under Item No-7 to 16 but required to complete the repair work / smooth functioning of Motor shall be deemed to be included with the unit rate .Transportation of Stator / Rotor parts for machining , rewinding at lathe shop at Tezpur / Rangapara is also deemed to be included with unit rate. iii). Rewinding of stator / rotor of motor, any machine work where involved shall be measured and paid separetely against relevant item of this schedule.

Supply only NDE ( Non Driver End ) bearing as per existing size (Heavy Duty), of Horizontal Split casing Pump to incorporate against each Item No.6 here-in-above complete all as specied and as directed.

Supply only NDE ( Non Driver End ) bearing as per existing size (Heavy Duty), of Horizontal Split casing Pump to incorporate against each Item No.6 here-in-above complete all as specied and as directed.

Supply only SS Pump Shaft sleeve for Pump shaft of Horizontal Split casing Pump to incorporate against each Item No.6 here-in-above complete all as specied and as directed.

Supply only Rubber tyre Coupling of Horizontal Split casing Pump to incorporate against each Item No.6 here-in-above complete all as specied and as directed.