Repair and renovation of Collectorate building face lift and Durbar Hall in the District of Keonjhar as per Revenue and DM Deptt. Lr. No. 42152 dt. 07.11.2025 Buildings.

CIVIL WORKS (PART-I) Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. a) Ground Floor

Dismantling and removing old tiles flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead complete including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. a) Ground Floor

Dismantling and removing R.C.C. Colums, Beams, Slab, staircase, landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead etc.as per direction of Engineer-in-charge. complete including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. a) Ground Floor

Dismantling double Nuria tileroofing (Tiles only) including stacking the useful materials for reuse and removing the debris within 50m lead complete including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. a) 1st Floor

Dismantling Wood Work wrought framed and fixed in frames of trusses upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials and stacking the serviceable material with all lifts and lead of 1000 metres complete including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. a) 1st Floor

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. a) Ground Floor

Providing lifting , hoisting and laying Reinforced Cement Concrete of M 25 grade(using branded cement) to the following structural member or in places as shown in the drawing for all floors with 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth (if required by grouting / providing plaster with cement mortar 1:4 wherever necesary without any extra cost) scaffolding, including watering and curing for the required period including providing strong, rigid, levelled and plumbed centring and shuttering to required shape and size, for floors with wood/Steel centring materials, with all necessary bracing and ties and supports pockets for electrical conduits, pipes, PH pipes, for hooks or boxes, switchboards and insert plates, clamps and extension bars, etc, including dismantling the same after the required interval from the date of casting, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering,curing, sundries. tools and plants etc. complete as per direction of the engineer-in-charge, but excluding cost of steel reinforcement. i) R.C.C Windows Sill a) Ground Floor

b) 1st Floor

Supplying steel i.e. Tor Steel / HYSD Bars conforming IS-1786 including straightening, cutting, bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight of tor steel / HYSD bars for all heights) complete as per specification & direction of Engineer-in-charge. a) Ground Floor

b) 1st Floor

Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand),(using branded cement) immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) (Using Branded Cement) with screened and washed sharp sand for mortar and finished smooth to the inside rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves or beads where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. a) Ground Floor

b) 1st Floor

Supplying, fitting and fixing vitrified tile of size 600mm x 1200mm of approved make a shade (Orient Bell, Somany, Kajaria, Johnson) in floor on 20mm thick bed of C.M. (1:4) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge. a) Ground Floor

b) 1st Floor

Providing, fitting, fixing vitrified tiles of size 600mm x 1200mm of approved make (Orient Bell, Somany, Kajaria, Johnson) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) (Using Branded Cement) jointed with neat cement mixed with pigment to match the shades of the tiles including washing and cleaning with oxalic acid and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects as per specification & direction of Engineer-in-charge. a) Ground Floor

b) 1st Floor

Supplying, fitting and fixing Industrial vitrified tiles in floor treads or steps and landing of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 of approved make on 20mm thick bed of C.M. (1:4) (Using Branded Cement) including cost of all materials, taxes, cess, labour, T&P etc. required for the work in all respect as per specification & direction of Engineer-in-charge. a) Ground Floor

Providing Granite Tiles of sizes Above 0.40 Sqm. (20mm thick) of approved make and shade, dressed, rubbed and polished, bottom coated with neat cement slurry in Stair case, Tread, Riser, Landing, Kitchen Slab Floors fixed with neat cement slurry, over 25 mm thick cement mortar (1:1)(1 cement : 1 sand) (Using Branded Cement) to masonry or concrete surfaces to proper level / slope and joints filled with cement mixed with matching colour in required proportion, polishing, washing and acid cleaning, including cost of all materials, conveyance, royalties, taxes, cess, labour, scaffolding, watering, curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Providing Granite Tiles of sizes Above 0.40 Sqm. (20mm thick) of approved make and shade, dressed, rubbed and polished, bottom coated with neat cement slurry in dado skirting & risers of steps fixed with neat cement slurry, on 12 mm thick cement mortar (1:3)(1 cement : 3 sand) (Using Branded Cement) to masonry or concrete surfaces to proper level / slope and jointed with cement slurry mixed with matching colour in required proportion, polishing, washing and acid cleaning, including cost of all materials, conveyance, royalties, taxes, cess, labour, scaffolding, watering, curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Providing and fixing 32 mm local teak wood panelled shutter moulded panels with all labour and fittings and wooden hinged cleats etc. fiitted and fixed complete excluding the cost of Iron fittings. a) Ground Floor

b) 1st Floor

Providing, fitting, fixing Dressed seasoned sal wood work framed and fixed (wrought and putup) confirming to IS specification & as per drawing & design, fixed to walls & colums with grouted clamps in frames of doors & windows, ventilabours in all floors including cost,conveyance royalities & all taxes of all materials and cost of labour for fitting, cess, fixing etc.complete as per specification & direction of Engineer-in-Charge. a) Ground Floor

b) 1st Floor

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete as per direction of Engineer-in-Charge. (100x75x3.50 mm)

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete as per direction of Engineer-in-Charge. (250x10 mm)

Providing and fixing bright finished brass handles with screws etc. complete as per direction of Engineer-in-Charge. (125 mm)

Manufacturing, Providing and Installation of GFRC Cornice (Glass Fiber Reinforced Concrete), Make SAMUDYAM of size 230 x 225 mm, with Pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate SS Pipe & Cleats frame work, using fasteners, and necessary hardware etc including MS scaffolding(Client Scope). in Building Façade. The element shall be made from 53 grade Portland Cement , Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make Owens Corning or equivalent, Super plasticizers / Additives make by BASF or equivalent, Polymers make BASF or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make BAYFERROX (Germany) or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ Reckli or equivalent. a) All Floor

Supplying, Fitting & Fixing M.S. Grill, Grills gates, MS gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of MS Square bar / flat including stair case hand railing with 40mm dia GI pipe etc. including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge. a) Ground Floor

Finishing wall surface of walls with Acrylic wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with,cost of all materials, taxes, cess, labour, conveyance, royalties, watering, curing, tools and plants, etc. complete, as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Finishing wall surface with painting two coats with Weather coat paint (1st quality) exterior grade over a coat of Cement Primer (Water based) of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cess, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. a) Ground Floor

Providing and applying painting over the plastered surfaces with 2 coats of Plastic emulsion paint over a coat of Cement primer of approved quality and shade, using the required quantity of Plastic emulsion paint as specified by the manufacturer to give an even shade including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Painting two coats with Synthetic enamel paint of approved quality and shade over a coat of primer (Red Oxide Primer) on surfaces as specified below Steel Surface) to give an even shade with 2 coats of approved quality paint, including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding. watering, curing, sundries. tools and plants, etc., complete as per the direction of the Engineer-in-charge. a) Ground Floor

b) 1st Floor

Melamine polishing to wood work one or more coats including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. a) Ground Floor

Supply & laying of 12 mm laminated Wooden flooring of AC5 grade with 100 hours of water resistance, scratch proof, antibacterial quality, anti static flooring of eco friendly with plank size of 1234 x 196mm of reputed brand such as (Lamiwood/ SKIPPER) of design/shade Butterscotch walnut 6026. Rate includes complete installation with backing foam, necessary adhesive etc. including the cost of all materials, cost of all labour, conveyance, loading & unloading, and T&P, etc. complete in all respect as per direction of the Engineer in Charge. a) 1st Floor

Supply & laying of 20 mm Monier tile of size of 430x330mm of reputed . Rate includes complete installation with charges excluding GST etc. including the cost of all materials, cost of all labour, conveyance, loading & unloading, and T&P, etc. complete in all respect as per direction of the Engineer in Charge. a) 1st Floor

Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling (600MMX600MM) 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95 percent, NRC 0.85 to 0.95 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance greater than or equal 88% as per ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90 degree edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85 percent.INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications above) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum.(Make-Armstrong/Hunter Douglus). a) Ground Floor

Providing and fixing False ceiling as per Saint Gobain Specifications made of standard G.I. Sections and 12mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, complete with putty, primer and painting of approved make and colour. Cost includes cutouts for electrical fittings, materials, labour, T&P etc complete as per direction of the Engineer-in-charge. a) Ground Floor

Providing and Fixing Knauf Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a Helmholtz fluted perforation with consecutive 3mm wide groove followed by 13mm of visible pane. The edges of the panel shall be tongue-and-grooved to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70 percentage with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Knauf and approved by the Architect/ Engineer-in-Charge INSTALLATION: An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturers recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface for fixing Knauf Keel. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per Knauf recommended procedure. a) Ground Floor

Supplying and fixing of wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete in all respect as per direction of the Engineer in Charge. a) Ground Floor

Supply & installation of Slats in wall panelling are made of pinewood E1 grade fiberboard, Melamine laminated finish, groove perforated slats L16-3/L23-3/L32-3/Customized (3mm grooves Slats @16mm centres) back lined with black acoustical fleece, tongue groove edge for a seamless look, of size 192 & 128x2440x15/17mm thick having base density 700Kg to 800 Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC25with the help of fasteners at every 400mm centres. Slats of size 192 & 128x 2430x15/17mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs both ways. Panels shall be back lined with acoustical infill of 1000gsm x 50mm thick adhered to the wall using Stick adhesive Technical Parameters: Core Variants Wood Core E1 Fibreboard Fire Class A Acoustics NRC up to 0.75 Climate (OC RH) 50, 70 Green (RC percent) 25 Strength, Load capacity (Kg) Ball-Impact inatallation as per direction of EIC. (Make-Armstrong/Hunter Douglus/Anutone). a) Ground Floor

Providing and laying in position 10.5mm thick Bruce Engineered wood Flooring of approved shade of size 1820mm x 190mm having smart lock tongue and groove joints to secure long lasting joint. The material comprising of three layers, Top layer is of genuine hardwood surface, the middle layer is of pine or spurce ribs laid transversely and the third layer is stabilizing bottom layer. The floor is finished on top with three course of formaldehyde free oil or five course of UV curved formaldehyde free lacquer. The boards are installed on foam and plastic on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories (corner beading, Door sill). a) Ground Floor

Manufacturing, Providing and Installation of GFRC Cornice (Glass Fiber Reinforced Concrete), Make SAMUDYAM of size 230 x 225 mm, with Pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate SS Pipe & Cleats frame work, using fasteners, and necessary hardware etc including MS scaffolding(Client Scope). in Building Façade. The element shall be made from 53 grade Portland Cement , Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make Owens Corning or equivalent, Super plasticizers / Additives make by BASF or equivalent, Polymers make BASF or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make BAYFERROX (Germany) or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ Reckli or equivalent. a) Ground Floor

Supplying & fitting, fixing of Un-plasticised poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three track three panel sliding window-60-series duly Manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost & conveyance of all materials acessories labour charges, Cess, taxes of all materials & product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards. a) Ground Floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture complete etc including cost of all materials, hardware fittings, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. a) Ground Floor

Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 to 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50 percent void space. The screens should be made from 53 grade White Portland Cement t, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by N.E.G JAPAN or equivalent, Super Plasticizers manufactured by BASF or equivalent, Polymers manufactured by BASF or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be Dry fixing i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti/ Fischer. a) Ground Floor

Supplying and fixing of Wall paper vinyl coated ,paper based ,textured , embossed wth thickness 0 .3 mm min. of approved design fixed with adhesive over wall surface finished with putty and primer including cost of all material and labour etc. Complete as per the direction of Engineer-in-charge. a) Ground Floor

Supplying & fitting, fixing of Un-plasticised poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator / Top Hung-60-series duly Manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement Windows Sash Profile capable of mounting single glazing system structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost & conveyance of all materials acessories labour charges, Cess, taxes of all materials & product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards. a) Ground Floor

Earthwork in excavation of foundation in all kind of soil (Hard Soil & Ordinary Soil) within 50m initial lead and 1.5m, initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge a) Ground Floor

Supplying and filling in foundation and plinths with sand well watered and compacted including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, watering, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.

Providing and laying plain cement concrete (1:3:6)(using branded cement) in foundation using 40 mm size hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) (Using Branded Cement) in foundation & plinth using Fly Ash bricks of 25x12x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge.

E.I. WORKS (PART-III) Wiring Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Single light point control by one 10A switch or first light point of group control-216 Group C

Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/-Schneider(Zencelo)//PANASONIC(VISION)

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X6+1X2.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years

Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year

Supplying and fixing 63Amps 4P 415 volts MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..Warranty on MCB is 1 years.

Supplying and fixing 40Amps 4P 415 volts MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..Warranty on MCB is 1 years.

Supplying and fixing 6 amps 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year.

Supplying and fixing 10 amps 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year.

Supplying and fixing 16 amps 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year.

SITC of 2W/mtr profile RGB LED light with extruded Aluminium housing material, 12/24V in complete as per direction Eng-in-charge.Make-Leksa/Canara/PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT

Supplying and fixing of Energy efficient surface /recess mounted square /round shape 10 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years

Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient wall FAN 600 MM Air Delivery Wall Fan Motor Speed: 1440 RPM Power Consumption: 180 W Blade Sweep Size: 600 mm Number of Speed Settings: 1 Material: Metal..Dominarie wall Fan complete with Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet complete as required and as per the Direction of Engineer-In-ChargeMake-USHA /Havells/ ALmonard/ Crompton/Orient/Bajaj

Supply of LED WALL WASHER LIGHT (12W), enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature-resistant lenses,1000MM surface mounted beam angle 15°/30°. luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with Die-cast aluminium housing, powder-coated finish , Power consumption should be 12W at steady state full intensity with Color rendering index CRI greater than or equal 80 for white LEDSs and power factor of complete luminaire greater than or equal 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit, Rated input supply of AC 220V, Lumen maintenance of at least L70@50,000 burning hours at 25°C. Output color should be 3000K, Ingress Protection greater than or equal IP 66. Impact resistance level greater than or equal IK 06. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : 25°C to +45°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified & similar to JAQUAR cat No. FLWWL018WW0015AO/FLWWL018WW0030AO or equivalent of Phillips, Trilux, Regent,LT * Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM /NICHIA.

Supply of LED FLOOD LIGHT (12W) , enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature-resistant lenses, Dimension L139xH173xW78mm surface mounted beam angle 15° luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with Die-cast aluminium housing, powder-coated finish , Power consumption should be 12W at steady state full intensity with LED efficacy minimum lumens 35Lm/W, Color rendering index CRI greater than or equal 80 for white LEDSs and power factor of complete luminaire greater than or equal 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit, Rated input supply of AC 220V ,Lumen maintenance of at least L70@50,000 burning hours at 25°C. Output color should be 3000K, Ingress Protection greater than or equal IP 66. Impact resistance level greater than or equal IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : 25°C to +45°C, THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified & similar to JAQUAR cat No FLFLS018WW0015AO or equivalent of Phillips, Trilux, Regent,LT * Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM /NICHIA.

Supply of Neon Flex,Homogeneous Dot free LED Flexible Linear Light Wattage 12W/m with high quality circuit design for stable and reliable performance, surface material should be made of Silicon with aluminium extrusion linear profile and other connecting accessories, Surface mounted flexible linear light suitable for facade edge lighting, Symmetric distribution. luminaire should have diffuse silicone based cover for soft illumination. Rated input supply of DC 24V constant voltage with external LED Driver, External ballast as accessory must be provided separately, Output color should be 3000K. The luminaire should have versatile optics : 120 deg, Mean rated service life L70(tq 25 °C) = 50,000 h. Ingress protection rating : IP66, impact resistance level should be suitable to site condition. The LED system with control gear unit is suitable for operation on direct voltage supply grids. The luminaire should be provided with Electrical safety class I. Power Efficiency : greater than 85%, Operating Temperature : (-25°C to +60°C) , Dimension L12xH12mm, Housing to have customised base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Must Be BIS Certified &similar to JAQUAR cat No FLNF12WWTB05MTDO or equivalent of Phillips, Trilux, Regent,LT * Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM /NICHIA.

Alluminium profile 12mmx12mm size, 1Mtr. for mounting neon flex light.

DC Drive 200w - FLPSMWXLG200 for DC power supply 200w for neon flex & DC products

Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. 3.5 core x 70 sq mm Aluminium armoured Cable.(FOR Sub-Panel incomer)

Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable. 3.5 core x 70 sq mm brass double compression gland and aluminium lugs

SITC of HD projector & Motorized Projector Screenof minimum size 24ft×12.6ft including all accessories as per thefollowing technical SpecificationHD projector projection system 3LCD Technology Colour light Output 3300 lumen 2400 lumen (economy) resolution full HDwall mount type, USB Display function 3 in 1: Image/Mouse/Sound, USB 2.0 Type A, USB 2.0 Type B, security Kensington lock, control panel lock, Security cable hole, Wireless LAN Security, Password protection AV mute site, Automatic keystone correction, Built-in speaker, DirectPower on/off, Horizontal and Vertical keystone correction,Wireless LAN capable, HDMI cable 1.8m, Power cable,Remote control incl. batteries etc.Warranty 3 years onsite, 1 year or 1,000 hours whichever is earlier Make: Epson, view sonic, Samsung

SITC of Projector, Brightness (ANSI lumens) 3300; Resolution 4K UHD (3840×2160); Native Aspect Ratio 16:9; Contrast Ratio (FOFO) 50,000:1; Display Color 30-bit (1.07 billion colors); Light Source Lamp; Light Source Life Normal 4000 hrs, SmartEco 15000 hrs, ECO 10000 hrs; Throw Ratio 1.13~1.47; Zoom Ratio 1.3x; Lens F/# = 1.9 - 2.47, f = 12 - 15.6 mm; Projection Offset (Full-Height) 100%; Keystone Adjustment 2D, (Auto) Vertical ± 30 degrees; Horizontal ± 30 degrees; Lens Shift Vertical +10% Make: Benq, Panasonic, Sony

Supply of 80 inch 4K UHD(3840 X 2160) Slim LED display, 500 Cd/m2, Android 9.0, Quad-Core ARM Cortex-A55 CPU, ARM Mali-G31 MP2 GPU, 2GB DDR4 memory, 16GB storage, HDMI 2.0 X 4, DP 1.2a X 1, USB- A 3.0 x 1, USB-A 2.0 x 1 USB-A 2.0 (Internal) x1, USB-C 3.0 x 1, HDMI Out x 1, RJ45 X 1, RS232 X 1, Audio IN X1, Audio Out x 1, Optic SPDIF, RJ12 x 1, 20W in built speaker, 24/7 operation, Built in Wifi & Bluetooth, HTML5 CMS Launcher, Android CMS Launcher, Scheduler, USB-Autoplay, Auto-Launch, HDMI-CEC, HDMI-Wakeup, OSD and UI Rotation, Video Rotation, NoSignalPowerOff, Pixel shift, Videowall support, Real Time Clock. with all its accessories including connector HDMI cable etc. Make: Delta/ Barco/Chirstie/LG/Samsung/Panasonic or equivalent

Supply of HDMI Cable. Should be minimum of 06 feet length or more passive, bidirectional HDMI to HDMI cable. Should have Male to Male HDMI connector. Suport Resolutions of Without DCS: up to 8K @ 30Hz 4:4:4 or 4K @ 120Hz 4:4:4, With DCS: up to 8K @ 120Hz 4:4:4, 8K60 4:4:4 video, 48 Gbps bandwidth, HDCP 2.3 or better, 24k gold-plated 19-pin Type A connectors or better, Thin and highly flexible CL2-rated cable, RoHS compliant Make: Crestron, Extron, Kramer or equivalent

Supply of Certified HDMI® Interface Cable, 18 Gbps, 20 ft (6.1 m) Make: Crestron, Extron, Kramer or equivalent

Supply of XLR Connector. Approved Make: MX or equivalent

Supply of 1000Base PoE Injector.Approved Make: Digisol/Netgear/Zyxel or equivalent

Installation, Commissioning, Programming, Testing and Training

AC Machine S/F of 2 ton Inverter split type AC machine ( 5 star rated) along with copper pipe, drain pipe, electrical connecting cable up to 2Mtr. & suitable bracket for out door unit of AC Machine ( Voltas-SAC 245V EAZZ/Carrier-superia PRO RED/Hitachi-I CONNECT-RAU518 MWD)

S/F of 5 KVA Voltage Stabilizer (90V to 300V) for A.C Machine (Make- Microtek,Model-EM5090 Plus)

Installation charges of AC Machine

Supply,installation & fabrication of Insulated drain water piping from indoor to nearest drain point separate to all and other nesessary material to complete the job.

Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable along with 25 mm weather proof closed cell nitrile insulation,complete with fitting of bends and other nesessary material to complete the job.

Please Enable Macros to View BoQ information