Airport Tenders in West Bengal

HYDRAULIC MOTOR SEAL 1385

Enamel, Synthetic, Exterior (A) Under Coating (B) Finishing Paint (V3) Confirming to IS 2932 (Q3)

Enamel, Synthetic, Exterior (A) Undercoating (B) Finishing (V4) Confirming to IS 2932 (Q3) ( ( 3 3 ))

PROP FLOW CONT VALVE, 42 GPM - 1349

OIL PRESSURE SWITCH 1120

Lead Acid starter Batteries (Q3) MSE Exemption for Years of Experience and Turnover

Refrigerant Gas (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Past Performance 20 % Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6059146 Dated : 15-03-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

AIR CLEANER P/N: P537452 MAKE: DONALDSON (Q3)

Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply Marked to IS 15636 (Q2) MSE Exemption for Turnover Yes | Complete Startup Exemption for Turnover Yes | Complete Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 2 Bid Number : GEM/2025/B/6574699 Dated : 14-08-2025 Bid Document 1/7 Past Performance 20 % Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Stationary Valve Regulated Lead Acid Batteries (V2) as per IS 15549 (Q3)

Cold Forged Steel Rivets For Cold Closing-IS:2998 (Q4) MSE Exemption for Turnover Yes | Complete Startup Exemption for Turnover Yes | Complete Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 4 Bid Number : GEM/2025/B/6434069 Dated : 09-07-2025 Bid Document 1/6 Past Performance 20 % Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Lead Acid starter Batteries (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Past Performance 20 % Bid to RA enabled No Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6303803 Dated : 03-06-2025 Bid Document 1/6 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value INR 50000 Evaluation Method Total value wise evaluation Bid Details EMD Detail Required No ePBG Detail Required No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

CONTROLLER P/N: 02931346 1401

EGT THERMOCOUPLE P/N: 9480-101-22543

SPARES PUSHBACK TRACTOR - 1425

Pushback Axle spares

15w - 40 Diesel Engine Oil (Q3)

SHUTDOWN DEVICE for Pushback Tractor

1494_ VOLVO SPARES

INDIVIDUAL PUMP and INJECTORS

MASTER CYLINDER ASSEMBLY

INJECTOR SERVICING AND OVERHAULING WITH 'O' RING 1335

Pneumatic Tyres For Passenger Car Vehicles - Diagonal And Radial Ply Marked to IS 15633 (Q2) MSE Exemption for Years Of Experience Yes | Partial | Experience - 2 year (s) Startup Exemption for Years Of Experience Yes | Partial | Experience - 2 year (s) Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 2 Bid to RA enabled No Bid Number : GEM/2025/B/6464197 Dated : 17-07-2025 Bid Document 1/6 ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Industrial Safety Gloves - Leather and Cotton (Q3)

GPU SPARES MAKE DEUTZ

AIR FILTER INNER & OUTER

Pushback Filters

Axle Oil as per IS 1628 (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Past Performance 20 % Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6070460 Dated : 19-03-2025 Bid Document 1/6 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 50000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

ALTERNATOR BELT & NARROW V BELT

HOBART GPU SPARES MAKE DUETZ

Lead Acid starter Batteries (Q3)

Carpet shampooing vacuum motor

Fevi Stick, Rubber Band, Binder clip, Stapler, Stapler Pin, Arch File

Ear Plugs as per IS 9167 (Q3)

Lead Acid starter Batteries (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Past Performance 20 % Bid to RA enabled No Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6247422 Dated : 19-05-2025 Bid Document 1/6 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Bid Details EMD Detail Required No ePBG Detail Required No 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Automotive Vehicles - Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply as per IS 15636 (Q2)

CHECK VALVE-1359

15w - 40 Diesel Engine Oil (Q3)

Oil Cooler Box

Ball Bearings as per IS 6455 (Q3)

Automotive Vehicles - Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply as per IS 15636 (Q2) MSE Exemption for Years Of Experience Yes | Partial | Experience - 3 year (s) Startup Exemption for Years Of Experience Yes | Partial | Experience - 3 year (s) Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Past Performance 20 % Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Bid Number : GEM/2025/B/6341924 Dated : 13-06-2025 Bid Document 1/6 Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 97500 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Rubber Grommet (Q3) MSE Exemption for Years Of Experience Yes | Partial | Experience - 3 year (s) Startup Exemption for Years Of Experience Yes | Partial | Experience - 3 year (s) Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6495685 Dated : 25-07-2025 Bid Document 1/6 Past Performance 20 % Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

STARTER MOTOR P/N: 04131847

AMC/CMC of Fire Extinguishers - AMC/CMC of Fire Extinguishers-As PER BUYER ATC:AS PER BUYER ATC; AMC CMC of Fire Extinguishers-As PER BUYER ATC:AS PER BUYER ATC

Hiring of Packaged Drinking Water Bottle - Normal; 20 Litre

Goods and Transport Service for Over Dimensional Cargo (ODC) - GROUND SUPPORT EQUIPMENT; GROUND SUPPORT EQUIPMENT; ANY SUITABLE VEHICLE THAT SHOULD NOT DAMAGE OUR EQUIPMENT; Outside state; 501 - 1000 Kms

Goods Transport Service – Per KM Based Service - TRACTOR ENGINE REQUIRES FOR TRACTORS; ANY SUITABLE VEHICLE WHIC WILL NOT DAMAGE THE EQUIPMENT; ANY SUITABLE VEHICLE WHIC WILL NOT DAMAGE THE EQUIPMENT

Monthly Basis Cab & Taxi Hiring Services - Premium SUV; AS PER BUYER REQUIRMENT; Local 24*7

Custom Bid for Services - ZF TRANSMISSION INSPECTION AND SNAG IDENTIFICATION Similar Category Repair and Overhauling Service

Goods and Transport Service for Over Dimensional Cargo (ODC) - AIR STARTER UNIT FOR AIRCRAFT HANDLING; ANY SUITABLE VEHICLE WHICH WILL NOT DAMAGE THE EQUIPMENT; ANY SUITABLE VEHICLE WHICH WILL NOT DAMAGE THE EQUIPMENT; Outside state; More than 1000 K..