Building Construction Tenders in Gujarat

Quick connect fittings and flexible hoses as per attached specifications

MOUNTED CONTINUOUSLY VARIABLW ND-FILTER AS PER ATTACHED SPECIFICATIONS

25 mm Glass Window 3 mm Thickness Part No 84-455, 25 mm Glass Window 5 mm Thickness Part No 11-890, 50 mm Glass Window 6 mm Thickness Part No 36-956, 75 mm Glass Window 5 mm Thickness Part No 36-966, 100 mm Diameter Protected Silver Coated Mirror Part No 84-447, 100 mm Focal Length Achromatic Doublet Lens Part No 49- 360, Johnson-Bessel Broadband Bandpass Filters Pack of 5 Part No 21-126, 50 mm Diameter Longpass Filter Part No 84-750

PROASIC A3PE1500-PQG208I IC FPGA 147 I/O 208QFP

Simcenter 3D software modules

COPPER ALLOY (C111 GRADE)

Upgradation of ANSYS Mechanical Software as per attached Specifications

Customised high-voltage electrical feedthrough flange as per drawing no. NIMS-01-01-01-00-0001& Specs, Customised high-voltage electrical feedthrough flange as per drawing no. NIMS-01-01-01-00-0002& Specs

Honeywell Micro switch: 11HM1(MS27216-5) Series as per attached specification

UVBRI BESSEL FILTER SET 2" ROUND UNMOUNT

GLEANAIR MAKE MICRO D CONNECTORS AS PER ATTACHED LIST AND SPECIFICATIONS

LAB OPTO MECHANICAL MOUNT

Laser AT 775 NM

USB 7 position Filter wheel as per attached specification

Mounted Microlens Array

high performance power supplies (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6117783 Dated : 08-04-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Temperature controlled soldering station (Q3) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6387684 Dated : 26-06-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

RESIDUAL GAS ANALYSER 200 AMU FARADAY CUP AND EM

2 Inch Protected Aluminium Mirror, Glan Taylor Prism, 2 Inch Protected Aluminium Elliptical Mirror, 100 mm Focal Length Achromatic Lens, 180 mm Focal Length Achromatic Lens, 30 mm Focal Length Achromatic Lens, 250 mm Focal Length Achromatic Lens, 25 mm Focal Length C-Mount Lens, 50 mm Focal Length C Mount Lens, 100 mm Focal Length C Mount Lens, 1 Inch Protected Aluminium Mirror

PASSIVELY COOLED MONOCHROME SCMOS CAMERA AS PER ATTACHED SPECIFICATIONS

Achromatic Lenses

Submersible Pump Set (Three Phase) (V2) as per IS 8034:2018 (Q2) MSE Exemption for Years of Experience and Turnover

High End Laptop - Notebook (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6970824 Dated : 10-12-2025 Bid Document 1/8 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

PCB connectors as per attached specifications

Microchip FPGA A3PE1500-PQG208I as per attached specifications

FFU UNIT RECTIFICATION _EACH 2NOS, MINIPLEATE HEPA FILTER 1220X610X70 MM, GARMENT CUBICAL SLIDING DOOR AND WHEELS, DOOR LIMIT SWITCH AND DOOR CLOSER, AIR SHOWER PUSH BUTTONS, DOOR BOTTOM SEAL, ENTRY DOUBLE DOOR EXIT BUTTON, AIR SHOWER BLUE INDICATION LIGHT, LED LIGHT 2X2, CLEAN ROOM FLOORING TILES 8.3X6.2 METER_ 8.3X4.1 METER, FFU UNIT REGULATOR, SERVICING AND INSTALLATION

S.S. 304 ROUND BAR 6 MM X 1000 MM, S.S. 304 ROUND BAR 12 MM X 1000 MM, S.S. 304 ROUND BAR 16 MM X 1000 MM, S.S. 304 ROUND BAR 20 MM X 1000 MM, S.S. 304 ROUND BAR 40 MM X 1000 MM, S.S. 304 ROUND BAR 70 MM X 300 MM, S.S. 304 ROUND BAR 90 MM X 300 MM, SS 304 HEX ROD 6 MM X 1000 MM, SS 304 HEX ROD 12 MM X 1000 MM, SS 304 HEX ROD 16 MM X 1000 MM, SS 304 HEX ROD 25 MM X 1000 MM, SS 304 HEX ROD 30 MM X 1000 MM, SS 304 HEX ROD 41 MM X 1000 MM, SS 304 FLAT BAR 25 MM X 10 MM X 1000 MM, SS 304 FLAT BAR 40 MM X 16 MM X 1000 MM, SS 304 SQUARE ROD 10MM X 10MM X 1000 MM, SS 304 SQUARE ROD 12MM X 12MM X 1000 MM

AA6061T6 alloy square bar 6.35 mm x 6.35 mm x 5 feet length, AA6061T6 alloy square bar 10 mm x 10 mm x 5 feet long, AA6061T6 alloy square bar 12.7 mm x 12.7 mm 5 feet length, AA6061T6 alloy square bar 15.87 mm x 15.87 mm 5 feet length, AA6061T6 alloy square bar 50.80 mm x 50.80 mm 5 feet length, AA6061T6 alloy square bar 65 mm x 65 mm 5 feet length, AA6061T6 alloy square bar 76.20 mm x 76.20 mm 5 feet length, AA6061T6 alloy square bar 85 mm x 85 mm 5 feet length, AA6061T6 alloy square bar 101.60 mm x 101.60 mm 5 feet length, AA6061T6 alloy square bar 120 mm x 120 mm 5 feet length, AA6061T6 alloy square bar 140 mm x 140 mm 3 feet length, AA6061T6 alloy square bar 153 mm x 153 mm 3 feet length, AA6061T6 alloy square bar 178 mm x 178 mm 3 feet length, AA6061T6 alloy square bar 200 mm x 200 mm 3 feet length, AA6061T6 alloy square bar 225 mm x 225 mm 1 feet length, AA6061T6 alloy square bar 250 mm x 250 mm 1 feet length, AA6061T6 alloy square bar 275 mm x 275 mm 1 feet length, AA6061T6 alloy square bar 325 mm x 325 mm 1 feet length, AA6061T6 alloy square bar 350 mm x 350 mm 1 feet length

8.5 TR scroll compressor, 11.0 TR Copeland Scroll Compressor

EDMUND OPTICS MAKE IFU MIRRORS P/N: 84415 AS PER ATTACHED SPECIFICATIONS, EDMUND OPTICS MAKE IFU MIRRORS P/N: 39224 AS PER ATTACHED SPECIFICATIONS

VACUUM GAUGE WITH ACCESSORIES AS PER THE SPECIFICATION ATTACHED

Onsemi SiPM MICROFC-30035-SMT with custom test PCBs as per attached specifications

PARAS-2 upgraded flange, Fiber Feed Through, Tee, Vacuum Guage Servicing

RTP-1553-SIM-ANLY-01 (MIL-STD-1553 SIMULATOR & BUS ANALYZER) WITH REQUIRED SOFTWARE AND ACCESSORIES

4 channel laboratory benchtop, precision DC power supply as per attached Specs

Two-Inch CGH, f/# 1.0 for the figure measurement system of X-ray mirror substrates, Two-Inch CGH, f/# 1.5 for the figure measurement system of X-ray mirror substrates, Positioning Stage for the figure measurement system of X- ray substrate

INFRA-RED WINDOW AS PER ATTACHED SPECIFICATIONS

ADJUSTABLE FLIP PLATFORM, MODEL FP90/M

Xenon Short Arc Lamp Power Supply as per attached specification

Designing Software (V2) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6390261 Dated : 30-06-2025 Bid Document 1/8 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 3.00 ( ) Duration of ePBG required (Months). 39 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Accounts Officer Physical Research Laboratory, Opp. ATIRA, University Road, Navrangpura, Ahmedabad - 380 009 (Accounts Officer, Prl) Splitting

Controller: Single gauge controller, Pressure gauge, Rotary Vane Pump(RVP), Turbo molecular pump(TMP)

Silicon Photo Multiplier (SiPM)

Digital SPCe small Pump controller as per attached specifications

Plumbing materials as per attached specifications

Quantum Band pass as per attached specification, Band pass Filter as per attached specification, Anti Reflective Coating as per attached specification

PLUMBING MATERIALS AS PER ATTACHED LIST AND SPECIFICATIONS

Supply, Installation, Testing and Commissioning of Loop driver card 460 mA for Zx5Se Morley IAS Fire, New Loop card configuration, programming and integration with existing fire alarm control panel set

Planetary Ball Mill as per attached specifications (Q3)

PVC Laminated Gypsum Tiles as per attached specification

Computer Monitor (Q2) MSE Exemption for Years of Experience and Turnover