Consultancy Tenders in Maharashtra

Request for Proposal for Detailed Engineering Design and Project Management Consultancy for Construction of foot over bridges and pedestrian underpasses along Metro Line 4 4A and 9 Packge2

EXPRESSION OF INTEREST CUM REQUEST FOR PROPOSALS for engagement of Consultancy organization/firm/agency to carry out Impact cum Evaluation analysis of Amended Technology Upgradation Fund Scheme (ATUFS)

Request for Proposal for Detailed Engineering Design and Project Management Consultancy for Construction of foot over bridges and pedestrian underpasses along Metro Line 4 4A and 9 Packge1

Invitation of Expression of Interest for appointment of Consultant for the work of Feassibility study and construction of solar Photo Voltaic Power Plants at various places within the jurisdication of Nagpur Municipal Corporation Nagpur

Invitation of Bids for Appointment of Project Consultant for conducting survey and mapping of slum areas within Yawal Municipal Council limits, and for regularization of encroached land leases upon approval from the Competent Authority.

Ms. Datta Sai Multi State Co.op Milk And Milk Products Ltd. Chilwadi Tq. Dist. Osmanabad. Under the Rashtriya Krushi Vikas Yojana Raftar PPPAID Scheme Project.

as per tender

Custom Bid for Services - Vetting of Tender document to On boarding of contractor for SMARTSEZ work, Custom Bid for Services - PMC Project Management Consultancy for SMART SEZ Tender work

REQUEST FOR PROPOSAL RFP For Selection of Project management Consultant For Peer Review of all reports and Construction work supervision For work of DESIGN and BUILT TURNKEY CONTRACT FOR DEVELOPMENT OF 18.30 M D.P Road

Appointing Design Consultant for Estimation andWorks Progress Monitoring for Providing Complete Lift and Car Lift System Work of New Charity Commissioner Bhavan at Dr. Annie Basent Worli, Mumbai. (2 Basement Ground floor First floor Seco

Appointing design consultant for Estimation and works progress monitoring for providing complete Fire Fighting and Air Conditioning system work of New Charity commissioner Bhavan at Dr. Annie Basent Worli, Mumbai. (2 Basement Ground floor Fir

Appointment of consultant for providing assistance in land acquisition proceedings up to award stage for rehabilitation and upgradation of Revas Reddi coastal highway msh04 to four two lane with paved shoulder in state of Maharashtra

Custom Bid for Services - Engineer Site Visit, Custom Bid for Services - Electrical Engineering Consultancy, Custom Bid for Services - Consul Mech Piping Dia, Custom Bid for Services - Consul Arch Struc Civil

JOB WORK FOR ARCHITECTURAL AND STRUCTURAL CONSULTANCY DRAWINGS PROVISION OF BRIEFING CUM ASSEMBLY AREA AT HQ MC BLDG AT VSN NAGPUR (JOB NO-MC/MC(U) /CAP/05/2019-20)

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; TO APPOINT A CONSULTANT FOR PREPARATION OF ENGINEERING SCALE PLAN ESP FOR THE RCF SIDING STARTING FROM PEN STATION UP TO TVSG YARD; Buyer

E.No. 0850 of 19-20 Prov. MEP Design consultant for MEP designing estimation and works progress monitoring of HVAC system for various sections at Currency Note Press - Central Government Undertaking Jail Road, Tal. and Dist. Nashik.

Appointment of Project Management Consultant for Preparation of Detailed Project Report, Submission to Government, Technical Assistance in Getting Approvals and for supervision on the approved project under GoI/ GoM Funded Schemes for the Work of Und

PRE-BID and POST BID TIE-UP THROUGH MOU WITH ENGINEERING ASSOCIATE/ CONSULTANT FOR CARRYING OUT DESIGN AND DETAIL ENGINEERING FOR CONSTRUCTION OF REFRIGERATED D.W.S.T. FOR DEBOTTLENECKING and AUGMENTATION OF CRYOGENIC FACILITIES AT BPCL LPG TERMINAL,

Custom Bid for Services - Custom Bid for Services - Obtaining Statutory Permission from Central Railways, Survey and Investigation for HDD crossing at Asangaon Railway Track, District Thane Similar Category GIS related Survey Services Hiring of ... of Consultants - ...

HQ DIAMOND IMP REAMER SHELL SHANK BLANK

Industrial Cooling Fan (Man Coolers) as per IS 6272 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6813849 Dated : 22-10-2025 Bid Document 1/7 Number of Auto Extension count 3 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause Yes ( Arbitration clause document ) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 Arbitration should not be routinely included in contracts Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Fused Tungsten Carbide Powder Size 100 - 200 mesh, Fused Tungsten Carbide Powder Size 200 - 300 mesh, Fused Tungsten Carbide Powder Size 400 - 600 mesh, Tungsten Metal Powder Size 2-3 Micron, Cobalt Powder Size 2-5 Micron, Nickel Powder Size 300 mesh

Nickel Bronze Metal Rod (Size: 4.5 X 4.5 X 25), TUNGSTEN CARBIDE TIP 2 x 2 x 6 MM

LED Luminaire for Floodlight (V2) Conforming to IS 10322 (Part 5/Section 5) (Q3) MSE Exemption for Years of Experience and Turnover

Tungsten Carbide Tips OCT 5.5 X 15MM, TUNGSTEN CARBIDE TIP OCT 7.5× 15 MM

Procurement of 12 inch Tendum Pulley Blank, Procurement of Hp Eye Bolt Blank, Procurement of Ws Cap Body Blank

MAINTENANCE TOOL TROLLEY

3 TPI stub ACME threading inserts

BLANK FOR NQ INNER TUBE CAP, BLANK FOR NQ LATCH BODY, BQ CB LATCH, NQ CB LATCH, NQ CB SPINDLE BEARING, NQ CB CHECK VALVE BODY, BLANK FOR NQ LATCH RETRACTING CASE, NQ CB VALVE ADJUSTING WASHER, BQ CB VALVE ADJUSTING WASHER, HQ CB VALVE ADJUSTING WASHER

Multi rate cylindrical rotational viscometer with sample cup, Mud mixer with container

NQ DIAMOND IMP BIT SHANK BLANK, HQ DIAMOND IMP REAMER SHELL SHANK BLANK, NQ DIAMOND IMP REAMER SHELL SHANK BLANK

Natural Processed Diamond Size: 100 - 200 SPC, Synthetic Impregnated Diamond Size: 30-40 US MESH, Natural Processed Diamond Size: 60 - 80 SPC

MEDIUM CARBON ALLOY STEEL TUBE 76 X 54 MM, MEDIUM CARBON ALLOY STEEL TUBE 80 X 40 MM, MEDIUM CARBON ALLOY STEEL TUBE 125 X 65 MM, MEDIUM CARBON ALLOY STEEL TUBE 92 X 73 MM, MEDIUM CARBON ALLOY STEEL TUBE 120 X 95 MM

Belt Oil skimmer (Q3) MSE Exemption for Years of Experience and Turnover

Parallel wall CDS Tube for converting to WLH drill rods, Parallel wall CDS Tube for converting to WLN drill rods, Parallel wall CDS Tube for converting to WLB drill rods

High Density Graphite Rod Diameter 60 mm X 12 inch, High Density Graphite Rod Diameter 4 inch X Length 12 inch, High Density Graphite Rod Diameter 5 inch X Length 12 inch, High Density Graphite Rod Diameter 6 inch X Length 12 inch, High Density Graphite Rod Diameter 7 inch X Length 12 inch

BLANK FOR BQ LATCH BODY, BLANK FOR BQ LATCH RETRACTING CASE, BLANK FOR HQ LATCH BODY, BLANK FOR HQ LATCH RETRACTING CASE, BLANK FOR NQ INNER TUBE CAP, BLANK FOR NQ LATCH BODY, BLANK FOR NQ LATCH RETRACTING CASE, NQ CB CHECK VALVE BODY, NQ CB SPINDLE BEARING

Dissolve Acetylene Gas as per IS 308 (Q3), Compressed Oxygen Gas (V2) as per IS 309 (Q3) MSE Exemption for Years of Experience and Turnover

NQ CORE BARREL OUTER TUBING SAE 1541, NQ CORE BARREL INNER TUBING SAE 1541

EN24 ROUND BAR DIA 30 MM, EN24 ROUND BAR DIA 45 MM, EN24 ROUND BAR DIA 60 MM, EN24 ROUND BAR DIA 57 MM, EN47 ROUND BAR DIA 55 MM, EN8 ROUND BAR DIA 30 MM, EN24 ROUND BAR DIA 110 MM, GUN METAL DIA 70 MM, GUN METAL BAR DIA 110 MM

THRUST BALL BEARING 51204, STEEL BALL POLISHED DIA. 5 by 8 inch, STEEL BALL POLISHED DIA. 7 by 8 inch by 22 MM, SLOTTED PIN 10 X 55 B ISO 8752, THRUST BALL BEARING 51305, COMPRESSION SPRING 1.4 X 10 X 40, COMPRESSION SPRING 8 X 36 X 7 X 65, HEX SELF LOCK NUT 3 by 4 inch BSW 10 TPI RHT, LATCH SPRING 2 X 19 X 39 X100 DEG., NYLON ROD DIA-2 1 by 4 inch, SLOTTED PIN 10 X 28 B ISO 8752, SLOTTED PIN 12 X 55 B ISO 8752, SLOTTED PIN 12 X 40 B ISO 8752, SLOTTED PIN M6 X 26 MM, LOCKNUT 1 1 by 4 INCH, COMPRESSION SPRING FLAT 48 X 4.5 X 40, O-RING 70 X 6 MM, O-RING 35 X 2.8 MM, LOCK WASHER MB10, PACKING SET MM, SPACER OD 62.8 X ID 51.5 X 1.5 THK, 3210 ZZ DOUBLE ROW DGBB, 51113 SINGLE THRUST BALL BEARING, WS HEXAGONAL NIPPLE

Procurement of Nickel Bronze Metal Rod

Est. No. MESD/MS/1302/2026-27 Appointing MEP Design Consultant for MEP Designing. Estimation and Works Progress Monitoring for proposed work of renovation,addition and alterations to E.I., LAN networking, Air Conditioning System, Lifts,Fire alarming

Custom Bid for Services - QUANTITATIVE RISK ASSESSMENT AND HAZARD AND OPERABILITY STUDY OF BPCL MUPL, KJPL & KHPL Pipelines Similar Category Energy Audit Service - Lumpsum Based Hiring of Safety Consultant Safety and Emergency Response Training Services (Version 2)

Empanelment of Project Management Consultancy for Preparation of Detailed Project Report, Estimates, Design and Supervision for Road, Buildings, Bridges, Garden, Landscape, Electrical Works and Other Development Works for Kalwan Nagarpanchayat Kalwan

Appointing MEP Design Consultant for MEP Designing Estimation and Works Progress Monitoring for Providing Complete Internal and External E I Fire Fighting System AC system CCTV with allied work of CITRUS ESTATE at Taluka phal rop vatika Paithan

Appointing MEP Design Consultant for MEP Designing, Estimation and work progress Monitoring for proposed New Metropolition Magistrate Court Building Work on new CTS No. 356 A/2 Plot No.1 at Kannamvar Nagar, Vikhroli East, Mumbai. (2nd Call)

Construction of Multi Storied/High Rise Building for the Transit Cum Training and Facilitation Centre for Haj Pilgrims at Kharghar, Navi Mumbai under Haj Committee of India, Ministry of Minority Affairs, Govt. of India

As per NIT

Refer Tender Notice and Tender Terms of Reference