Fabrication Tenders in Assam

Re-fabrication of In-situ glued joints against the sanctioned work: (i) Rangiya- Murkongselek-Provision of Track Machine Siding-11 stations. (Project Id: 08.04.31.24.3.53.003) (ii) RangiyaJn.-Majbat (SL) - TSR (P)-36.00 Tkm (Project Id: 08.04.31.25.1.53.001) (iii) Balipara-North Lakhimpur (SL)-Renewal of Conventional SEJ under the jurisdiction of ADEN/VNE (Project Id: 08.04.31.25.3.53.011)

Fabrication of IN-SITU "Glued Insulated joint" in 52/60 kg Rails as per RDSO's DRG No.T/2572 and conforming to the Manual for Glued Insulated rail joint 2024 (Revised) issued by Ministry of Railway's RDSO/Lucknow, 1160 Nos under jurisdiction of Sr.DEN/I/LMG in the section GHY-LMG under Lumding Division.

Please refer Tender documents.

Supply of welding portion against the sanctioned work: (i) Rangiya Jn.- Murkongselek (SL)-TBR-21.50Tkm (Project Id: 08.04.31.23.1.00.005) (ii) Provision of Track Machine siding 11(eleven) nos under DEN-III/ Rangiya Division (Project Id: 08.04.31.24.3.00.003) (iii) RNY-Division Renewal of Conventional SEJ-100 Nos. (Project Id: 08.04.31.24.3.53.021) (iv) Rangiya Jn.-Majbat (SL)- TSR(P)- 36.00Km. (Project Id: 08.04.31.25.1.53.001)

Automotive Vehicles - Retro - Reflective Sheets and Tapes (Traffic Safety) as per IS 14221 (Q4), Welding Rods and Filler Wire for Gas Shielded Arc Welding of Structural Steel as per IS 6419 (Q4), Pipe Cutter (Q4), Machine Needle (Q4), Glue Stick (V2) (Q4)

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF CABLE TRAYS (MT0-05)-LOT-2

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF CARTRIDGE FILTERS as per material requisition

Design, Fabrication, Supply and Installation of a Vacuum Chamber System with a Support Structure for Solenoid.

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF FASTENERS- MTO-5 as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF GASKET (NON-ASBESTOS) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF WROUGHT FITTINGS- (4.205) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF WROUGHT FITTINGS- (4.203) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF WROUGHT FITTINGS- (4.207) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF HV CABLE (MTO-5)- LOT-2

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF MV CABLE (MTO-5)- LOT-2

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF CABLE TRAYS (MT0-05)-LOT-1

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF FLAME ARRESTOR as per material requisition

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF WROUGHT FITTINGS - (4.196) as per MR

PLYWOOD FOR GENERAL PURPOSE, PLYWOOD GENERAL PURPOSE, ROD WELDING IRON, STEEL SHEET CARBON, SOLDER SOFT, BLADE HACK SAW

Paint White, Paint Aluminium, Paint Blue, Thinner, Steel Angles, Steel Welding Rod, Iron Sheet, Matal Diode, Sheet Cellular

AVR, Electroninc AVR, LT Wire, Welding Rod, Paint White, Insulation Tape, M Seal, Cloth Dasootie Cotton, Fevi Quick

Welding Cable (V2) as per IS 9857 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In ... category Welding Cable ...

G1 5340 003617 SEALS METALLIC LEAD 10MM, G1 5315 000186 PINS COTTER SPLIT STEEL 5.5 MM X 63 MM, G1 5305 003185 SCR CSH HEX PRE STL 8.8 PHOS M 22X85MM, G1 5315 000075 PINS COTTER SPLIT STEEL 2.5 MM X 40 MM, G1 5320 000334 RIVETS SNAP HEAD COPPER ... ROD WELDING HARD ... ROD WELDING SILICON ... ROD WELDING IRON ... ELECTRODES WELDING STEEL ... ELECTRODE WELDING CAST ... ROD WELDING IRON ... ROD WELDING HARD ...

Sheet Cellular, Elect Rodes Welding, Steel Angles, Iron Sheet, Controller Unit, AMP Meter, Volt Meter, Stop Solonoid, Metal Diode

Angles Steel 45x45x5 mm, Angles Steel 22x22x5 mm, Rod welding Steel Mild 3.15 mm, Brass Rod free cutting hexagoan

Safari Strome Matting, WD-40, Tape Insulation, Thread Tape, Wheel Cutter Big Size, Wheel Cutter Small Size, Welding Rod

INSULATION TAPE, ELECTRODS WELDING ROD, PLWOOD GEN PURPOSE, M SEAL, WASHER SPRING CLIP BOQ Title INSULATION TAPE BOQ BID

Leather Cloth Black, MS Sheet, WD-40, PCB Cleaner Spray, Steel Angle Iron, MS Pipe, MS Patti, Welding Rod

ANABOND, INSULATION TAPE BLACK, TERMINAL BTY NEGATIVE, TERMINAL BTY POSITIVE, ELEC WELDING ROD, ABRASIVES CLOTH EMERY, LEATHER CLOTH BLACK

Fiber Sheet 12 x 3, Iron Round Pipe 2inch, Welding Rol 10 Nos, Cutter Blade, Nut and Bolt, Washer

ignition switch, welding rod, m seal, brass rod free cutting, ply wood sheet BOQ Title ingnition switch boq bid

MS SHEET, ELECTRODES WELDING ROD, PLY WOOD GENERAL PURPOSE, PASTE FILLER, METAL PRIMER, LEAD SHEET BOQ Title BOQ ORD

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF NON STANDARD FLANGES as per material requisition

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF CAST VALVES- (MTO-5) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF MULTI-TYPE FLOWMETERS as per material requisition

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF CAST VALVES (MTO-5) - 4.119 asper MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF AS PIPES (MTO-05) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF SS PIPES (MTO-05) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF ANGLE TYPE GLOBE VALVE as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF HV CABLE (LOT 2) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF MV CABLE (LOT 2) as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF CHAIN PULLEY BLOCKS as per material requisition

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF BALL VALVES (MTO-5)- 4.132 asper MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF SIGHT FLOW GLASS as per material requisition

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF FORGED VALVES- (4.122 and 4.123)- MT0-5

Design, engineering, procurement, fabrication, inspection, testing, transportation, and SUPPLY OF FLANGES (CS)- MTO-5 as per MR

Design, engineering, procurement, fabrication, inspection, testing, transportation, and Supply of Wrought and Forged Fittings as per MR

Supply of Mechanical Jack lifting equipment 30-ton capacity confirming to IS 3832- 2005 the frame of the block shell be design for proper strength , The hardness of the pawl tip shell not be less then 40 hrc and that of Ratchet not less then 30 hrc. ... hrc. Welding shall ...

Thinner, Dendrite, Puttey, Paint Red Oxide, Elect Rodes Welding, Steel Angles, Iron Sheet, Wire Electric Copper, First Aid Kit, Beeding

Melamine wood polish, Self thred screw 1 inch, Welding rod, MS Round pipe 20mm x 20Ft, Cutting Blade 14 inch