Loading
Loading…
Loading…
30 live16 closing this weekmost from Central Coalfields Limited and Bharat Coking Coal Limited
30 results • Best match
Custom Bid for Services - Electrical and Fabrication Works during Chhath Puja 2026 at DVC CTPS Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations
Rubber Welding Hoses as per IS 447 (Q3)
Repairing of boom foundation mounting base eye, dipper stick eye, and bucket eye including material build-up, fabrication of bushes, machining, and line boring. Repairing of BABC and connecting rod by welding and machining. Repairing of cracked chass
Welding Cable ISI Marked To IS 9857 (V2) (Q2) (3 (3 ))
Fabrication of Electrical Panel (IP55) at Nehru Complex and Guest House of Koyla Nagar
Fabrication and Erection of Structures and Replacement of pipes at various elevation of Silo and ESP.
Fabrication and Installation of 02 Nos. Temporary Shed and Chain Link Fencing at different locations under Birsa Project.
Repairing welding of both side LH and RH Main arm mounting bracket and blade support arm an cross arm, tilt cylinder mounting and tilt cylinder cover an brace arm and its mounting, both side boss sprocket oval hole, both side LH n RH cutting edge end
Fabrication and Fitting of Fan Blade, Fan Cover and Terminal Box of 300 HP Motor at Dobari Colliery Under ABDKGC.
For fabrication and erection of Iron shed 25 feet x 12 feet for EnM installations Pump switch Gears Etc. at Kankanee colliery. (B) and fabrication and erection of Iron shed 20 feet x 12 feet for 1.5 MVA 11 KVA/3.3 KV indoor type power transforme
Fabrication and Errection of Refill Station in T Shape and Making of Short Piece Bend Jointing of Valve etc, at KOCP under ABDKC
Fabrication and erection of radium base ACP sheet board for guidelines issued for road weighbridges and checkpost of Topa Project under Kuju Area.
Custom Bid for Services - IRC for Design and Fabrication of Safety Signages and Safety Boards across Offices, Operational Locations in Jharkhand Region Similar Category Non Paper Printing Services - Quantity Based Non Paper Printing Services - Area Based
Repairing of HT motor opening, bearing opening bearing portion welding and machining and all item refitting Gayathri crusher PS-1 ROM section at Madhuban Coal Washery under Block-II Area, BCCL.
Manufacture/Fabrication and Supply of Gas Collecting Mains and Cross Over with Suction Mains required for Installation of Stamp Charged Battery No.-12 COB-12 of IISCO Steel Plant SAIL-ISP at Burnpur, Asansol.
Design, Manufacture / Fabrication, Assembly, Inspection, Testing, Delivery F.O.R. IISCO Steel Plant site basis and supervision of erection, trial run, commissioning and demonstration of performance parameters Pkg. SS-991 required for installation of Stamp Charged Battery No.-12 of IISCO Steel Plant SAIL-ISP at Burnpur, Asansol WB .
Providing and fixing of AMP digital meter also fabrication of new panel box for fixing of meters in control room, VFD panel room, starter room (DH3 DH4) at Rajmahal CHP
Design, Manufacture / Fabrication, Assembly, Inspection, Testing, Delivery of Gantry Crane With Grab Bucket and EOT Cranes and Supervision during erection , testing and commissioning of equipment _Pkg. SS-930_ on behalf of M/s SMS_I_ for Installation of Stamp Charged Battery No.-12 of IISCO Steel Plant _SAIL-ISP_ at Burnpur, Asansol _WB_.
Reconditioning of wheel-burnt/scabbed rails/cupped welds by using RDSO approved technology such as Micro Flow metal spray powder technique or robotic welding technology under the jurisdiction of Sr. DEN (West)/CKP (2nd Call).
Replacement of mounting pad, repairing of transmission guard,fabrication of transmis-sion mounting bolt,repairing of drive line, flange repairing of spider assly, transmission flange repairing drive shaft repairing of PL 270 at AKKOCP
Fabrication and erection of a 15inch x18inch dumping site platform/structure and primary dumping Hopper using Scrap Dumper Bed and Salvaged Materials for the Mobile Jaw Crusher (Asset No. 910000002590) at Block-IV , Govindpur Area
Repairing and reconditioning of final drive, gears, shaft, RH hub splines, carriers, support, rebuilding of sprocket ovel hole by welding and grinding and replacement of undercarriage assembly for BD155 Dozer Sl No. 13786 of Amrapali Project, A-C Are
Repairing of roller guard, providing of mounting Nut-bolts, repairing of both side propel gear box driving sprocket shaft, providing and ma-chining of GM bush, track chain opening and fitting work using gas cut-ting and welding of Drill SL. No. 775
Changing of upper and lower damaged radius arm eye housing and new bushing fitting and welding of broken mounting eye and Repairing of output shaft of Damper assembly, drive line opening and Damper assembly dismantling of Dumper Sl. No 10327 at AKKOC
Dismantling, Fabrication, Erection, Fitting and Repair of Vibrator Tray Receiving Chutes, Tray Chutes and Discharge Chutes of Chute Nos. 02, 03, 04 and 05 (Store Side) and Chute Nos. 04 and 05 (Road Side) of Main Plant, Sawang Washery.
Repairing of idler pulley, repair of failed greasing sys-tem, fabrication of engine sump guard and transmission line steel tubes, Re-pairing of hydrau-lic tank guard, Re-pairing of EGR tubes of Dumper Sl. No.- 10282 of AKKOCP, BnK Area
Provision of RCC Bed Blocks including fabrication/fixing of Rail Clusters and dismantling of existing RCC Bed Blocks/Bed Plates in connection with strengthening/jacketing and other miscellaneous works of Major and Minor Bridges under the jurisdiction of DEN/CENTRAL/CKP. (2nd Call)