Fabrication Tenders in Jharkhand

Fabrication and Installation of Steel display board at NKSTPP

Designing Fabrication and Creatively Exhibiting NTPC Pavilion at IME

FABRICATION OF OHP AND FLOORING AT WAITING AREA AT

Fabrication of Truck barrier at ramp of F breaker

Fabrication and Erection of Main Gate of GM Bunglow

Fabrication of 04 nos. engine stand at Ashok OCP

Supply of AHU Cooling Coil along with Fabrication and

Platform fabrication of 1 Pit Winder Victory Bastacolla Colliery

Fabrication and repairing of Gear Box of Sawang Washery.

Fabrication of cabin/hood for Tata Telco line vehicles

Single and Double sided PCB prototype Fabrication Machine (Q3)

Repairing of welding machine of 24/96 Dragline of ABOCP, Block -II Area

Following repairing is to be done in RECP650 Drill Sl. No.6021714. (A) Denting and fabrication of railing structure, fabrication of HSD tank locking arrangement and propel motor guard cover fabrication. (B) Denting and repairing of battery box.

rep of damaged ideler bore welding bore rap. Bore making and boosh new casting and fitting bore ideler making and fitting welding machineing of TATA HITACHI 191

For Repairing LHS Track chain link cutting , welding of carrier roller foundation, welding plating, idler shft repairing of Dozer Sl. No. 11837 at AKWMOCP, KATRAS AREA, BCCL .

WELDING ELECTRODE SIZE 3.15 MM X 450 MM RATE PER KG

Repairing of Electrical Welding Machine on Service Van Gidi A Project.

Welding machine diesel engine driven single operated with trolley mounted (Q3)

Rewinding of 300A welding machine at maheshpur colliery under govindpur area.

Portable Gas Cutting and Welding Set with all attachments and accessories.

Repairing/fabrication of engine sump guard, repairing/fabrication of coolant Iine steel tubes 02 nos. and mounting of the guard of W/T-28007

Fabrication and erection of iron structure at truck unloading ramp and fabrication slope structure, ladder and rest shelter in respect of AADOCM, Dhori Area

Repairing of LHS dipper eye end fabrication and LHS boom side platform fabrication of EKG Shovel HMB-481 at Nichitpur OCP of Sijua Area.

FABRICATION OF BASE PLATE OF PUMP and MOTOR AND FABRICATION OF 02 NOS.NEW COUPLING FITTING IN U/G 2 SEAM AT KPC UNDER AKWMC.

Casting and fabrication of 04nos. Bearing housing 2000GPM pump and casting and fabrication of neckring 04nos. 10UPH8 4000GPM pump under AMP Colliery, Barora Area.

Collection of idler by cutting chain from BERA Project (two nos. Idler), Cracked Arm welding and Re-inforcement, arm stick two no. bore welding and line boring and one no. bore of connecting rod welding, line boring and bush pressing of LnT Sl.No.732

(1) Jointing/ Welding of 8IN pipes 160 Pc. jointed long pipes 120 Pc. of 02 nos /03 nos/04nos AND 80 Pc. flanges welding for use in 5th AND 6th new delivery ranges for dewatering of main sump of AMPL patch 2. Jointing/welding

Repairing work for A) Repairing of carrier roller mounts foundation cutting welding bracket bolt opening centre pin fitting and welding in Dozer T 2446. B) Repairing of 20 HP air compressor motor

Fabrication, providing and fitting of different size Bus Bars required for different panels of starters, switches LT and HT of GRD Project.

1. Platform accident portion damage cutting and welding and straightening. 2. New railing of guard welding and fitting and platform setting.

Repairing, fabrication and removal of 04 nos existing backing block and new fabricated block welding on boom and its bolts fitting and repairing thread making of 02 nos top slide an 02 nos backing block of crowd motor and its new bolts and studs of

Dismantling of Rusted and damaged 10 dia pipe 2nd range and Repairing of Flange with cutting, welding and fabrication of Nipple, Taper, bend and re-jointing of 10in dia pipe 2nd range at discharge point Boxcut-Ill out sourcing Area of ABOCP mine Blo

Welding of wear plates on boom and Cracks - 560 mm in front lower portion of boom ,Repairing of Crowd motor foundation plates - 04 nos. and Repairing /Fabrication of Crowd Motor Pinion (01 no.) of 182 M Marion Shovel, Sl. No.- 221 of AMP colliery.

(A)Welding of flange in 10inch dia M.S. Pipe, fabrication of 10inch and 8inch dia bend, short piece and tapper pipes (b) extension of delivery of two 4000GPM pump installed on the pontoon at Jarlahi patch sump and maintenance of above pump at AMPC.

Following repairing is to be done in RECP650 Drill Sl No.-6021713 and IDM30 Drill 201506839. (1) Denting and fabrication of railing structure, fabrication of HSD tank locking arrangement and propel motor guard cover fabrication. (2) Denting and repa

Replacement of top lining kit plates of conveyor chain, side walls lining plates, drum roll lower side mother plates with the help of cutting, welding, repairs and fabrication works and changing crusher drum roll bearing of BD make Feeder Breaker.

Bi-ennial Maintenance Contract for Mechanical Maintenance of Equipmentand Fabrication work at Coal Handling Plant of PVUNL,Patratu

For 01 No. Fabrication and Installation of 12 Mtr. High Mast Tower TMC

Repairing/ welding of generator of Mobile Service Van Registration No.JH10V1684 of Kuya OCP, Bastacolla Area IX

For Repairing of stay cylinder and both side bend Chassis assy Straightening, welding and both side yoke welding ,machining of Dozer Sl.No. - 11994 at AKWMOCP katras Area BCCL

New making and welding of dipper handle buffer 2 nos and new making,welding of dipper eye end of HMB 580 at ANTST-JG OCP, Lodna Area, BCCL.

Portable Single Operated Rectifier Type DC Arc Welding Set Suitable for Manual Arc Welding Process as per IS 4559 (Q2) MSE Exemption for Years of Experience and Turnover

CONTROL TRANSFORMER, Part No: S21.03.001.0063, Spare for ADOR MIG Welding Machine, Model No: Champ MIG-600, Machine No:41/18060180. Make: ADOR Only. Accepted MAKE: ADOR WELDING LIMITED.

Repairing 02 Nos Roller (RHS) Periphery welding and machining of BE1000 Sl. No. G10120 Shovel of ABOCP Mines.

Erection fabrication for making of box of tipplers pillers of 4,5,6 incline of Dhori (K)

For the fabrication of Coupling 12 inch 8 Nos. at SB Workshop under Sijua Area

For the fabrication of CI Coupling 10.5(4 Nos.)and 12.5(3 Nos.) for Sendra Bansjora Workshop under Sijua Area

(A)Fabrication/erection and fitting of Unit No. 209 tray supports using angle, channel, plate etc. (B)Fabrication/erection and fitting of Unit No. 203 tray supports using angle, channel and plate etc. and (C)Fabrication/erection and fitting of stair

(A)Dismantling, fabrication and erection of receiving chute of Unit No. 250 Screen in Sec-II, (B)Dismantling, fabrication and erection of receiving plate (HIT Plate)of Unit No. 250 Screen in Sec-II, (C)Dismantling, fabrication and erection of receivi

Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3), Welding Electrode - Covered Arc Welding Electrode - Rutile Type (BEML) (Q3), WELDING ELECTRODE - Air arc gouging electrode ( BEML) -as per C4117 BEML Welding Electrode (Q3) ... category Welding Electrode ... Arc Welding Electrode ...