Fabrication Tenders in Jharkhand

For bucket bushing and welding of EKG Shovel HMB-492 at AKWMOCP, Katras Area, BCCL.

Repairing of 630 Amp. Welding machining 220v/440v/550v at Dhansar pit under ADI Colliery

Supply of Manual Metal Arc Welding Electrodes. Dia.: 4mm, Class: M4, Type of Coating: Heavy.

Repairing of damaged front glass frame denting and welding and new safety glass fitting in BH60M dumper Sl. No. 60123 at Nichitpur OCP, Sijua Area

1. Operator cabin accidental damaged portion cutting and welding, straightening and fitting and realigning of damaged guard welding, cutting, straightening and fitment of safety glasses. 2. Alignment and fitting of damaged cabin portion.

Service Contract for Fabrication cum Erection of MS platforms approaches, shed etc. for all plant Areas at North Karanapura.

1.Broken dipper handle buffer 02 nos cutting by gas 2.New buffer making and welding by electrodes. 3.Plate cutting from grounding machine 4.New making of dipper eye end. 5.New eye end welding by steel electrodes 6. Chappa collar buildup by e

1.Broken lock bar keeper cutting by gas and gousing electrodes 2.Plate cutting from grounding dumper 3.Lock keeper plate welding by steel electrodes. 4.Ribs welding on the keeper plate 5.Welding of crowd motor foundation plate by steel electrode.

. Repairing of failed Final drive assembly(LHS) . 2. Rep. of Stick assembly eye oval holes and steel bush fitting and crack portion V cutting and welding. 3. Fitting of tooth adepter-02 nos. and welding work.

Fabrication, Erection and making of transformer foundation and shed

Repair, fabrication and erection of water supply main pipe line 8 inch dia near by back gate, welding of 6 inch dia GI pipe line near by water stock tank and new fitting of pipe line 2 inch dia from 80 B/C take-up drum to 00 level, dismantling and fi

Repairing / Fabrication of two (2) nos. of Pump base frame, two (2) nos. of Rana Tugger Haulage Base Frame and fabrication of 4 bend and 6 inches nipples at Dhori (K) Colliery.

(A) Repairing and fabrication of (02 Nos.) crowd clutch disc (with steel plate) and (B) Fabrication of back plate of crowd clutch of Marion Shovel Sl. No. Exc-1851 of Kathara Colliery.

REPAIRING OF DAMAGED ENGINE BREACKET CHASSIS CUTTING AND 2 SIDE NEW BRACKET WELDING JOB HYVA SL.NO.1603,9702,7403,7399 (B)DAMAGED DALA CHASSIS BRACKET CUTTING WITH ANGLE, CHANNEL PLATE WELDING OF HYVA REG.NO.1612 , 7399 (C) DAMAGED DALA

Repairing/Rewinding of Trip Motor 15 KW (01 No.), Hydraulic Motor 5HP (01 No.), Welding Machine (01 No.) of EKG 5A Shovel Sl.no. HMB 488/EXV2440 and one no. Welding Machine for Workshop of Religara Colliery.

For repairing of Arm cylinder oval eye end welding line boring bush pressing, piston rod repairing and 02 Nos. jointing pin welding machining of Hyd. Shovel of BE1000 Sl. No. 10075 at AKWMOCP, KATRAS AREA, BCCL

Repairing of RHS bend and cracked mast foot plate by straightening, welding and fabricated steel plates welding and worn out RHS front axle shaft of RECP650 Drill, Sl. No.RDC-1401/6021703 of GVP Ph II OCP.

Burnt welding of secondary DC to electrical workshop and 12 mtr electrical workshop shifting after repairing welding machine shifting and re installation or fitting secondary DC and 12 mtr in Raw Coal Section of Kathara Washery

Repairing of RHS bend and cracked mast foot plate by straightening, welding and fabricated steel plates welding and worn-out RHS front axle shaft of RECP-650 Drill, RDC-1289/6021401 of GVP Ph-II OCP.

Supply of portion and welding including supervision for welding of rail joints by SKV method in connection with various track renewal and repair works under ADEN/CPU & ADEN/RNQ in the jurisdiction of Sr.DEN/4/DHN.

1. New making of 2 nos dipper handle eye end. 2. Welding and machining of eye end. 3. Broken dipper handle eye end gousing by electrode. 4. New dipper handle eye end welding by steel electrode. 5. Dipper bracket welding by steel electrode.

Repairing of partially damaged Bucket cutting edge corner gouging, grinding and its complete welding 06 Nos Extra metal plates L Type support welding of bucket corner

For cutting and fabrication of steel structure for the lifting up of submersible pump due to damage and unsafe plate form at 2 pit Bhadrichak, Mudidih Colliery under Sijua Area

Fabrication of 10 Nos Diesel tank cap and 10 Nos. hydraulic tank cap for dumper of ABOCP mine.

Fabrication and fitment of engine safety guard of Drill (Model REL650, Sl.no1305) deployed at Karma OCP, Kuju Area.

Repairing, Cutting, Welding and Straightening of base with base plate of 75KW motor installed at Lapanga Colony of Bhurkunda colliery.

For Fabrication of 01 No. Shed Covering for Switch and Transformer Near Gareria Siding at Sendra Bansjora under Sijua Area

Repairing/ fabrication of silencer assly. replacement of Uclamps etc. of Dumper D-60432

Fabrication/Repairing of circle Reverse gear (Gear, shaft and worm wheel) and repairing of blade lift cylinder of motor grader 25139 running at ABOCP Mines.

1. Repairing of operator cabin damage cutting, welding, straightening alignment operator gate damage welding, denting , straightening and fitting of door lock in Dumper sl.no. 106, CAT dumper 1071, 1072 side glass new changing and door gla

1. Repairing of muffler installation with fabrication of bracket clamp support fabrication frame changing glass charging N2 gas charging valve accumulator fab pin of Dumper Sl No 60393. 2. Repairing of damaged pan hard Dumper Sl No 60393

Welding and supply of 10 inch dia flange with 10 inch M S pipe for mines dewatering preparedness for pipeline laying and maintenance of w.r.t. konar exp. OCP, BnK Area

For the fabrication of 01 no. of Iron shed (20ftx20ftx10) covering from all sides for safe keeping of Indoor transformer (L.T) and Switch at shiv mandir SBC and 02 nos. of shed(6ftx6ftx10ft) with bench covering from all side at SBC coal dump and sidi

Repairing of new fabrication of tilt cover and mounting base for D355 dozer sl. No.- 11538, 11795 and 11842.

Fabrication of coupling set with matching and alignment of one 3CHR 2000 GPM pump and another 2000 GPM split casing pump with motors of capacity 435 Kw of AADOCM

1.Broken dipper handle buffer 02 nos cutting by gas. 2.New buffer making and welding by electrode. 3.Plate cutting from grounded m/c. 4.New making of dipper eye end. 5.New eye end welding by steel electrode. 6.Chappa collar buildup by electrode

New Making and fabrication of 05 Nos of moveable rest shelter for Kuya OCP and Kuya Colliery of Bastacolla Area IX

Repairing, rewinding of AC arc 440V 350Amp Welding Machine sl. no. AW88362, model EC 450 Indarc make of STR Shop under R.R. Shop (NK) Dakra

Repairing of LHS chain guard 02 nos. welding fitting and bottom roller 06 nos. mounting, broken bolt remove tap threading fitting and track chain opening, fitting welding of Drill RDC-775 in R/O Konar Exc. (Excv.).

Complete repairing of radiator frame with fan and platform and radiator bracket and CAC bracket aluminum welding and CAC base box aluminum welding and CAC pipe assembly of BE1000 Machine Sl. No. G10253 at ADIC Kusunda Area

Continuous electric welding of bracing members at every angle joining points and tack welding in half round of nuts at required different towers in 220 kV RCP-Joda Line under the jurisdiction of GSS Adityapur-2(RCP)

Repairing of domestic water supply 6inch/4inch dia M.S. Pipe line through providing and welding of 6inch dia M.S.flange and replacing of damaged 4inch dia M.S.Pipe with welding of 4inch socket at Budora colony under AMP Colliery.

For repairing /fabrication of silencer assly. and its cover and fabrication of stand with brackets and new safety glass fitting in IDM30-II Drill Sl. No. DR-196 at AKWMOCP , KATRAS AREA, BCCL.

REPAIRING/FABRICATION WITH DISMANTLING AND WITHDRAWAL OF OLD AND DAMAGED MOTHER(IMPACT) PLATE FABRICATION WITH FITTING OF NEW MOTHER (IMPACT) PLATE AND OTHER RELATED JOBS OF ATLAS COPCO MAKE FEEDER BREAKER AT DBOCP.

Repairing and fabrication of hub shaft, GM bush and fabrication of Eye bolt and two nut (stud type) and repairing of segment for single crusher at under Raw Coal Section of Sawang Washery.

Repairing of hoist cylinder supporting eyes build-up and fabrication, Level jack cylinders (4 nos.) eye build-up and plate fixing and fabrication of mast resting frame of Drill 916 of Purnadih Project

Fabrication of GI sheet shed on operators cabin, painting of rusted complete body of feeder breakers local sl. No. 01 and 02 including fabrication of MS path and ladder at AADOCM, Dhori area.

1.Old tilt guard fitting portion worn out plate cutting/removing 2.Providing of m s plate on top and bottom portion drilling fitting by weldng. 3.Tilt guard profile making 4.Plate cutting bending joining and welding for tilt guard making. 5.Tilt

Construction for rural mini WSS with 1 HP DC Solar motor pump complete set, Deep T/W of 125/155mm dia 90 mtr drilled tube well, steel structure staging etc. all complete at Ananwadi center in Vill-Panchayat-Dudhiya, Block-Baliapur. (DMFT Fund)

Construction for rural mini WSS with 1 HP DC Solar motor pump complete set, Deep T/W of 125/155mm dia 90 mtr drilled tube well, 6 steel structure staging etc all complete at Jairamdih, Vill- Panchayat-Luttipahari, Block-Baghmara. (DMFT Fund)