Fabrication Tenders in Jharkhand

Fabrication of 04 nos. Jack leveling pad of IDM 30 drill DR242 at Nichitpur OCP of Sijua Area.

Fabrication / Erection and replacement of USL Screen in S-2 Slurry screen in Main Plant at Sawang Washery.

Fabrication/Erection of steel structural for transfer BC feed chute and discharge chute in PCH at Sawang Washery.

REPAIRING AND FABRICATION AND FITMENT OF 8 NOS HOSES IN BH100 DUMPER SL NO 90031 OF KDH PROJECT

For Fabrication and fitting of folding ladder of EKG Shovel Sl. No. - 523 at AKWMOCP , KATRAS AREA, BCCL

Repairing, Fabrication/Erection of cable tray structure of transfer BC of Top in Electric Section of Sawang Washery.

fabrication of Bend pipe, Short pipe and foot valve for 6 inch Third Pipe rage in ADI Colliery

Fabrication and erection of Suction and Delivery line of domestic Water Supply Pump at Konar River, Jarangdih Colliery

Providing fabrication grouting and fitting of safety board at different location of Phularitand, AMP Colliery under Barora Area.

FABRICATION OF SHED IN ELECTRICITY ROOM FOR SAFETY OF TRANSFORMER and SWITCH AT SIJUA CHP UNDER KATRAS AREA.

Modification, remarking and fabrication of motor and pump foundation base frame at Quarry no. 3 at Kathara Colliery

Dismantling, fabrication, erection and alignment of Toe Guard of 1101 belt conveyor under loading section of Rajrappa Washery

Dismantling , fabrication, erection and alignment of structure of 1204 and 1304 belts under Loading Section of Rajrappa Washery

For new fabrication of transmission guard of Dumper Sl.No. 3508, 3522 and 3525 at AKWMOCP , Katras Area, BCCL

Repairing /fabrication of crowd motor working platform and railing of EKG 564 at AKK OCP of BnK Area.

Fabrication of Over-Head Vehicle Stopper Guard (Rail Post) and Jamming (02No) at Burragarh Siding under Bastacolla Area.

Repairing / fabrication of 04 Nos. tilt cover of D-355 Dozer Sl. No. T-11592, at Kathara Colliery.

Fabrication of drum pontoon set consisting 96nos of conditioned empty drum with 04 balancer of Muraidih AMP Colliery

Replacement, Fabrication and Erection work of liner plates of bucket Elevator casing of Batac jig at Sawang Washery.

New fabrication of latch lever of EKG5A shovel EXC-2500 and EXC-2593 of Govindpur Ph-II OCP

Repairing/fabrication of fire extinguisher stand of dozer , payloader, grader, crane of Govindpur Ph-II OCP, Kathara Area

Fabrication of Drum Pontoon for Installation of HT Pump at Patch G of Kujama Colliery under Lodna Area.

Fabrication and erection of receiving chute of new bunker washed coal side in RLB section at Kathara Washery

FABRICATION OF 2ND BASE PLATE AND 4 NOS 6 INCH SIZE BAND FOR 2 PIT OF GOPALICHAK COLLIERY.

Fabrication, installation and commissioning of 10 nos. of integrated control panel for lighting control of AKKOCP, BnK Area

Providing, fabrication, grouting and fitting of safety board at different location of Phularitand, AMP Colliery under Barora Area.

For Fabrication and installation of 20ftx15ft Shed Height 10ft for Transformer Room at Kankanee Colliery under Sijua Area

FABRICATION AND PATCH CUTTING AND MAKING OF ROAD CROSSING PIPES OF 10INCH DIA AND 8INCH DIA AT AKWMC.

For Fabrication and fitting of folder ladder of EKG Shovel Sl. No. 492 at AKWMOCP , KATRAS AREA, BCCL

Fabrication and fitting of white metal bush bearing, coupling of required size for 2000 GPM pump motor set

Design, Manufacture/Fabrication, Testing, Inspection and Supply of Fabricated Butterfly Valves on F.O.R Bokaro Steel Plant site basis

Fabrication and Installation of 02 Nos. Temporary Shed and Chain Link Fencing at different locations under Birsa Project.

1.Old rack segments removing by gas and gausing electrodes. 2.Dipper segments removed portion grinding. 3.New rack segment alignment. 4.New rack segment welding by three layers. 5.Broken buffer cutting and new buffer welding. 6.Repairing of cra

Dismantling, Shifting, Welding and Laying, of 140 mtrs. 6 inch dia pipeline for extension of delivery side to coal stock no. 34 and welding for damaged pipe of 100 mtrs. 6 inch dia pipeline to coal stock 39 for the purpose of dust suppression under M

IMS Certification for ISO 9001:2015 (QMS), ISO 14001:2015 (EMS), ISO 45001:2018 (OH&SMS) & ISO 50001:2018 (EnMS) and Certification of ISO-3834-2:2021 - Quality of welding requirements in fusion welding for all 04 major C&W freight depot (PEH, PTRU, BRWD & OBRA).

Repairing of both side operator cabin door by denting, welding and fitting and operator cabin door new door locks and door handle fitting and operator cabin and cabin door new safety glass fitting with new rubber bit, rubber locks and aluminium cha

1. Housing roof sheets dismantling and structure channel and angle alignment setting and welding and sheet reshaping welding and fitting with nuts bolts and washer and repairing of damage platform. 2. Housing left hand side damage wall sheet di

1. Gousing of foundation plate 04 nos. 2. New plate cutting 04 nos. 3. New thread making 04 nos. 4. New making of nut 04 nos. 5. New making of bolts 04 nos. 6. Plate welding by steel electrode. 7. Chappa welding by steel electrode.

For modification of fuel tank and fabrication of side support and brackets and rep. of back side platform and railing and track roller broken bolt taking out and new thread making and fitting and fabrication of tools box of IDM30 Drill DR-236

A)Fabrication and erection of discharge chute and gate plate and repairing of channel, angle etc. of unit no. 923 old bunker n RLB section and B)Fabrication and erection of channel, plate with supporting structure, stairs and railing and repair of pl

Repairing, fabrication and installation of water injecting system and its related water line and fabrication and fitting of dust reducing guard and repairing of 02 Nos. of track chain guard and fitting in IDM 30 drill DR242 at Nichitpur OCP of Sijua

Fabrication of grease point in both side bucket pin, machining of 03 nos. side pin and fabrication of 03 nos. bucket pin bushings operator seat repairing, both side gate lock and both side gate of WA800 Komatsu pay loader L7 of Ashoka OCP.

Matching a motor pump set (01 unit) with base frame fabrication or modification, followed by the supply and installation of a R-140 tyre coupling set, base frame foot bolts, and the fabrication and fitting of suction and delivery nipplesin order to i

Repairing of rear chassis assly. along with fabrication of LHS n RHS bracket AND rep. of radiator assly, battery box 02 nos. new making, fabrication of transmission guard of Tyre Handler BL 14 TH-18094 at of Govindpur Ph-II OCP, Kathara Area

A)Repairing/fabrication and erection of fresh water pipe line 100 mm dia, bends, nipple, valves, reducer etc. at 27 mtr level and 0-0 level and centrifugal side B)Repairing, fabrication and erection of baby screen including supporting structure at-le

fabrication, dismantling of base plate and making of pump body short piece for installation of 4000GPM Pump-2 Nos.1000GPM Pump and 2400 GPM Pump of OCP NPC(ii)fabrication of cover box of Transformer 500KVA for protection of 11KV incoming and outgoing

Repairing of rear connecting rod pin and bush hole, repairing of front A frame Making and Fabrication eye hole and pin and repairing of tie rod making and fabrication of Pin and bush hole of Komatsu Dumper Sl.No. 10336 of Gidi-A Project.

A. fabrication of shed and foundation for installation of DG set at CISF watch tower B. Fabrication of splined ring ,pin and rubber bush coupling Assembly in connection and overhauling of secondary gearbox of feeder breaker no 2 at JRD railway siding

Repairing of rear connecting rod pin and bush hole, repairing of front A frame making and fabrication eye hole and pin and repairing of tie rod making and fabrication of pin and bush hole of Komatsu Dumper Sl. No N10334 of Religara Colliery.

A) Repair, fabrication and erection of pathway both side of unit no. 949 and 950 belt conveyor in RLB Section B) Dismantling of old and damaged vibrator and discharge chute and fabrication and erection of new discharge chute its channel angle, plate