Fabrication Tenders in Jharkhand

For repairing of leaking mast rigid pipes 02 Nos. cutting, welding, setting, fitting of Drill Sl. No. DR-249 and repairing of adopter of DR-249 at AKWMOCP , KATRAS AREA, BCCL

Repairing of Damaged Wornout Operator Cabin Plateform and Its Railing Dismantling, Straighting, Denting and Welding and Fitting of Cat Dumper M/C Sl. No.1550 of Kuya OCP, Bastacolla Area-IX

Repairing of both end crusher roll of Feeder Breaker No-2 along with cutting and welding of Picks with holders before and after repairing of crusher roll of Muraidih, AMP Colliery

Repairing of operator seat and back rest seat and wornout seat base welding and proper aligment of tyre Handler M/C SL.No.B-18140/TH-5 of Kuya OCP, Bastacolla Area IX.

Repairing of upper railing both side platform, door, ladder, and repairing of radiator bracket aluminum welding with cap and silencer assly and pully repairing of BE1000 G10253 at DOCP Kusumda Area

For repairing of 01 no. welding machine 400 Amps. , 440/220 volt and 02 nos. air compressor top block repairing at CHP AKWMOCP for HEMM maintenance at AKWMOCP, KATRAS AREA, BCCL.

For repairing of bucket cylinder barrel oval eye end welding and line boring and new bush making and pressing of hyd. Shovel BE1000 Sl. No. 10024 at AKWMOCP, KATRAS AREA, BCCL

For Repairing of track chains, pin cutting, welding and machining and extraction of broken bolts 30 Nos. of track rollers and rethreading of Drill DR-245 at AKWMOCP, KATRAS AREA, BCCL.

Repairing and Replacement of 70 No old Holder Cutting Dismantling and Grinding. and New Holder 70 No Picks Fitting and Welding of Atlas Copco Feeder Breaker at BNR Siding ROCP/SJ

On site repair of the idle and bent poles of the 440 V and 220 V OH Electric Line by cutting and welding, in Mine, w.r.t. Karo OCP, under BnK Area

Complete repairing of Differential Tail Crown cassy. Differential Bull gear assy, with Shaft Dismantling, overhauling, removing fitting like Differential Crownhousing, Crown Body Welding, repairing, making and Bearing Gasket Kit requires replacement

50 nos Damaged Picks Holder removing and new 50 nos Picks Holder fitting and welding of Atlas Copco Make Feeder Breaker crusher drums at BNR siding RCOP SJ under Bastacolla Area

Repairing of damaged and worn out boom foot mounting eye both turret structure by welding and line boring of ZX-650 TATA Hitachi backhoe Sl. No. DACG-0164, of Jarangdih Colliery.

Flange welding carrying laying and joining 6 inch dia 280 Nos Pipes from jeenagora Kali Mndir to near South Tisra workshop for domestic water supply purpose at Amal.NT-ST Jeenagora Project.

Repairing 02 nos. Varat Pump 1485rpm, Model No. 125 VCP4 as body repairing, welding by CI Electrodes and machining with impeller, long shaft repairing/making at Filter bed of Sawang Washery.

Repairing of air tank assembly (03 nos. air cylinder) of air brake system and MS plate changing cutting and welding of Scania tipper SD-14 at Nichitpur OCP of Sijua Area.

Repairing and straightening of 02 nos. drill rod (5 inch x 25 ft.) and thread making and adopter welding of IDM-30 drill sl.no.833 at Tetulmari OCP of Sijua Area.

On site repair of the idle and bent poles of the 440 V and 220 V OH Electric Line by cutting and welding, in Mine, w.r.t. Karo OCP, under BnK Area

Complete Rewinding /Repairing of One(01) No. 35 KVA 300Amps Rocket Arc welding Machine 550 Volt 3 Phase Local Id.No. 33/75691 at Lodna of Aml. Joyrampur Colliery Under Lodna Area.

ElectrodeGouging 4 MM F Cutting 200 300A, Electrode 3 point 15 MM, Electrode 4 MM, Electrode 5 MM, Electrode Cast Alloy CI 4 MM Mchnbl, Electrode Alloy Stl Dissimilar Matrl 4 MM

For fabrication of steel coupling 12 inch 01 set. (02 Nos.) of HT Motor and 12 C.I coupling (02 Set) 04 Nos. of LT Motor at Mudidih Colliery

Repairing of operator cabin dashboard denting, welding, repairing necessary rusted sheet changing and propeller shaft teeth with sleeve required of TATA Truck Registration No. JH10D9781 of Kuya OCP,

Repairing/ denting and welding of house wall, roof, railing pipe of house roof, safety glasses guard, operators cabin and replacement of new safety glasses of EKG electrical Shovel Sl.No. SL.No. HMB-543/S383 of Kuya OCP, Bastacolla Area IX

Repairing of platform of 50T road weighbridge no 03 and fabrication of locker for keeping tools and instrument used in day to day work at TSOCP under hazaribagh Area.

Dismantling of structure by gas cutting and Fabrication and Repairing of HEMM tool boxes, Battery Box and Safe Rackes of different size at RR SHOP T/N, Hazaribagh Area

For fabrication of complete 04 Pcs. Front, middle and rear tilt guard and mounting base plate and fitting of Dozer Sl. No. G-11536 at AKWMOCP, Katras Area, BCCL

Dismantling , fabrication erection and alignment of pathway of 1201 and 1301 belt conveyors, platform and stairs of PS-8 and 9 under Main Washing Plant of Rajrappa Washery Project

New fabrication of cabin support adjustable protective device (04 Nos.) of Scania P380 model dumpers SD-03, SD-20, SD-14 and SD-16 at Nichitpur OCP, Sijua Area.

Fabrication of 15 nos. of M.S. Boards for display of important messages and instructions to be installed in Mines and other sensitive locations, w.r.t. Bokaro Colliery, under BnK Area.

Fabrication of LHS gate and repairing of RHS gate and replacement safety glass, channel, rubber bit and door lock for Dozer BD355 Sl. No. G11390 at DOCP, Kusunda Area

Supply and fixing heat shrinkable cable termination and straight jointing kits and fabrication of fan covers and terminal box of motors at JRD rly siding of AKKOCP, BnK Area.

Replacement for manufacturing, fabrication and casting of 10 nos. pillow block for apron link chain return rollers of ROM section at Madhuban Coal Washery under Block-II Area, BCCL.

Repairing, fabrication and overhauling wheel gear pinion 122 teeth and G.M. split bush and split block (Angle type) Id-75mm at feeder under Raw Coal Section at Sawang Washery.

Repairing of old panel, support of vibrating screen 111A1A2 and B1B2 and Traverse pipe dismantling and new fabrication and erection and A1, B1 different Grizzly repair of Pre-Washery.

Fabrication and fixation of customized LED backlit based structural steel board, SLD based structural steel board and MS Board for earth pit at 33KV Main substation AKKOCP, BnK Area

Dismantling of damage counter weight pully, box channels and car haul pully installation and fabrication of same at loading section at Madhuban Coal Washery under Block-II Area, BCCL.

Repair of radiator guard etc of D15 Dozer and fabrication of electrical plug and socket fastening of S7 Shovel CK300 and chain tensioner of D3 Dozer of Ashoka Project.

For Repairing/fabrication of water tanker inside partition plate and frame and cleaning of tank and jammed pipe of water tanker Sl. No. 28190 at AKWMOCP , KATRAS AREA, BCCL

For modification of service fuel tank assly and fabrication of side support and brackets along with back side platform IDM 30 Drill DR-159 at AKWMOCP , KATRAS AREA, BCCL.

Repair, fabrication and erection of platforms at 13 mtr and above coal tank (242-243) with 8mm M S plate (125 sq. m) in HMS Section of Kathara Washery

Dismantling, Fabrication/Erection of steel structural work and repairing of step deck panel for SC-1 Screen and same platform repairing in O/S restriction Plant at Sawang Washery.

Repairing of Transmission mounting and flange , drive shaft and its mounting and fabrication and fitment of cushion and bracket of HM1035 Water tanker sl no 270 of rohini project.

Replacement of bath reducer fabrication and erection after dismantling the same and changing the M.S ring of wheel separator of unit no. 205 in HMS section at Kathara Washery

Dismantling Fabrication Erection n Alignment of Tray n Catch Pan hopper liner plate n Motor Base of USL Screen under Main Washing Plant PS 5 of Rajrappa Washery Project

Fabrication of the mountings of Pull down cylinder (Pt. No.- V7684) and Air compressor (Pt. No.- V5351) of RECP 650 Drill, Sl. No.- 509 (DR-243) of AMP Colliery.

For Modification / fabrication of both side window and new safety glass fitting both window and door of Dozer Sl. No. 11550 , 11554 and 11553 at AKWMOCP , KATRAS AREA, BCCL

Erection and fabrication of shed with electrical maintenance for smooth power supply of Power Transformers and Distribution Transformer at 10 no main sub-station Sarubera Project under Kuju Area

Fabrication and erection of bottom roller and carrier roller fitting and supporting channel angle plate etc of unit no. 143 and 144 in RCB 00 section at Kathara Washery

Repairing of track chain, fabrication and fixing of tilt hose guard, ripper boot, foot rest, LHS RHS trunion ball and covers of D11T Dozer D2 at Ashok Opencast project.

Dismantling, fabrication, erection and alignment of discharge chute fixed screen supporting frame underflow collecting pans of coarse coal and fine coal jig under main washing plant of Rajrappa Washery