Fabrication Tenders in Karnataka

Compressed Air Petrol Pre-heating system with complete equipment, suitable for welding of rail joints by AT welding process & Pre-heating system deployed shall have facility to record and save the Pre-heating parameters viz. pressure and time, firm details, welder details and weld location details for a particular weld along with facility to send these preheating parameters and related details automatically as SMS to concerned Railway officials immediately after finishing of preheating. It shall be possible to send this SMS simultaneously up to 10 mobile numbers as per IRST-19-2021, date: 01.02.2022, Point No. 10.1 (iv). Make: THE INDIA THERMIT CORPORATION LIMITED-KANPUR or Similar.

Design, Manufa, Supply, Install, Commission, Test & Prov of Side Wall Gantry Spot Welding Mc

Supply Installation and Commissioning of 1.5 KW FIBRE LASER Hand Held, Welding, cleaning Machine

Manual Metal Arc Welding Electrode, Class D, Type of Coating: Heavy, Specification No.: IRS:M-28/2020, STR: RDSO M C STR W 01 Rev-03, Size: 4 mm x 450 mm. Note: 1)To be procured from ICF approved source only. 2)Manufactures test certificate should accompany along with the supply

Manual Metal Arc Welding Electrode, Class D, Type of Coating: Heavy, Specification No.: IRS:M-28/2020, STR: RDSO M C STR W 01 Rev-03, Size: 4 mm x 450 mm. Note: 1) To be procured from ICF approved source only. 2) Manufactures test certificate should accompany along with the supply

Design, fabrication and supply of display boards of 5mm thickness of assorted sizes.

Fabrication and delivery of test fixtures for CNG cylinder mounting system vibration test

Fabrication and supply of water tenders chassis as per department technical specification - reg.

Design, Fabrication, Supply, Installation and Commissioning for Skid Mounted Non-IBR Electrode Boile

Custom Bid for Services - MRPL Tender 3900000943 1st service code 1033002 Fabrication Supply and installation of Cooling tower Process Cooling Tower cooling water pump Suction TStrainer as per BOQ and Scope of Work Bidder has to quote lumpsum amount ... 1050248 Fabrication Supply ...

Provision of Vehicle, Provision of Manpower, Provision of Crane or Hydra, Provision of JCB, Provision of DGPS and Total Station, Provision of ARC welding, Provision of GAS welding, Provision of Scaffolding, Shifting of Equipment, Miscellaneous works

Supply, install &commission of 400/450-AMP MIG welding with wire feeder & other standard accessories

Supply, Installation and Commissioning of Invertor Based Arc Welding Set (250 Amps), Single Phase (Q3)

SUPPLY, INSTALLATION AND COMMISSIONING OF DC TIG WELDING MACHINE WITH WATER COOLED TIG TORCH (Q3)

Custom Bid for Services - item no 1032203 as per BOQ SDM TANK POLYPROPYLENE BALLS UNLOADLOAD Bidder has to quote lumpsum for 1 quantities, Custom Bid for Services - item no 1008289 as per BOQ PATCH PLATE WELDING MSCS 10 MM PLATES Bidder has to quote ... BOQ FABRICATION AND ... OF MS STRUCTURE Bidder ... BOQ FABRICATION AND ... AND WELDING OF ... PIPE WELDING UPTO ...

Custom Bid for Services - MRPL Tender No 3900001508 Supply of Fabrication groups for Steam trap Management as per SOW and BOQ and in GEM overall total lump sum rate to be quoted including GST Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

ESTABLISHMENT OF APROXIMATE 15 Nos NANDINI KIOSK TYPE MILK PARLOURS AT VARIOUS METRO STATION PREMISES IN BENGALURU CITY Work including Fabrication installation of parlour structure, Providing Kitchen equipments utensils Interior Exterior Elevation Branding Electrical Water supply and other related works for complete parlor set up on Turnkey basis

Custom Bid for Services - MRPL tender No 3900000425 for Filter media replacement and related fabrication jobs for ETP 1 and 2 filters as per BOQ and SOR Items in Annexure B refer Sl no 1 to 13 and in GEM overall lump sum amount to be quoted inclusive..

Construction of CC drain from Nannima house to old keertiraj welding shop (gund road) at 06th ward, vekatapura road yallappa house to galemma temple at 02nd ward, H buden sab house to hadagali suban house via rajabakshi house at 13th ward and Venkatapura road to anganavaadi school at 15th ward Mariyammanahalli town

Automatic and Semi Automatic Welding Equipment with Self Adjusting Arcs MIG/MAG as per IS 7931 (Part 1, Part 2 and Part 3) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 2 Bid Number : GEM/2025/B/6926754 Dated : 25-11-2025 Bid Document 1/8, -- Number of days for which Bid would be auto -- extended 7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 75000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 6 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : 2/8 Sr.AFA/W and S/AP/MYSS Office of the Sr.AFA/W and S/AP/MYSS, Mysuru South Ashokapuram, Mysuru -570008, SOUTH WESTERN RAILWAY, Indian Railways. (Sr.afa/w And S/ap/myss)

Micro LED Display Solution (146 Inch) with 8K Backend Controller, Wall Mount, Frame & Fabrication

Dismantling of MS windows, fabrication of uPVC windows and allied repair works of building

Fabrication and supply of Trolley Mounted Dewatering Pumps as per department technical specification - reg.

MAINTENANCE, UPGRADATION OF TRG INFRA/ASSAULT AND LEVELLING OF TRG GROUND WITH CEMENT, WELDING AND P

ok

ok revised

Estimate for the work of providing, fabrication, laying, linking and fixing of 250mm to 100mm dia DI/MS pipe with specials for Improvement of water from Nisarga bar all along Muniveerappa layout, Shampura area and surrounding area coming under Manorayanapalya service station pertaining to AEE N-1-2 Sub division-Others

Manpower Outsourcing Services - Minimum wage - Skilled; Others; Providing manpower to carry out Civil maintenance works Restoration maintenance of sewage drainage system Office assistant welding fitting jobs in Township of KIOCL Limited Kavoor Manga.., Manpower Outsourcing Services - Minimum wage - Semi-skilled; Others; Providing manpower to carry out Restoration maintenance of sewage drainage system taking care of KSRC activities in Township of KIOCL Limited Kavoor Mangaluru, Manpower Outsourcing Services - Minimum wage - Unskilled; Others; Providing manpower to carry out Civil maintenance works Restoration maintenance of sewage drainage system Garden maintenance taking care of KSRC activities and Public Health Services i..

Supply of Dust mask, Supply of Nose Mask for Tig And Mig Welding, Supply of Gum Boot

Supply, install&commission of 300amp/400-ampwelding system for AC&DC TIG with HF welding Power source

REPAIR OF TIGER LEAP OBSTACLE, WELDING AND MASONRY WORK COMMANDO SWING OBSTACLE AND REPAIR OF WOODEN (Q3)

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Spot Welding Machine; Service Provider

Design, fabrication and supply of Reflective Aluminium board of 1.4mm PU colour coated Aluminium she

00704057010000 Design, Fabrication, supply and installation of 3D scale down static display model o (Q3)

00704057010000 Design, Fabrication, supply and installation of 3D scale down static display model o (Q3)

SUPPLY OF DELIVERABLES AND SPARES, FABRICATION, TESTING AND INSTALLATION & COMMISSIONING AS A PART O (Q3)

DESIGN, FABRICATION, SUPPLY AND TESTING OF 240KW ( 120KW X 2) ELECTRICAL INLINE HORIZONTAL HEATER CA

DESIGN, DEVELOPMENT AND FABRICATION OF DISPLAY CASING WITH MANNEQUINS AND INTERACTIVE PANEL TO DISPL (Q3)

Custom Bid for Services - MRPL Tender No 3900001583 for ARC for fabrication of pipeline and other structural jobs for process modification jobs as per BOQ and in GEM overall total lump sum rate to be quoted considering 59 service items including GST .. Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - MRPL Tender No 3900001617 for PPU feed purification system piping fabrication and erection and commissioning as per BOQ and in GEM overall total lump sum rate to be quoted considering 42 service items including GST as per BO.. Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

1Collecting of sample drawings of each Generating Unit carbon brush holders from KPCL.2.Testing of each type existing Brush Holder material composition and newly supplying material composition and submitting the reports to KPCL. The material ... KPCL, Fabrication of ...

Euro connector type MIG/MAG Welding torch of length 3 Mtrs. of 300/350 AMPS Suitable for KEMPPI Machine Make: KEMPPI, ESAB, ADOR, BENZIL, KEEAN, WELDGURU, OTC DAIHEN Note: 1) Nozzle, contact tip (suitable for 1.2mm) & all other conduits has to be inline with KEMMPI torch model: MTP350. 2)The sample to be approved before bulk supply

Construction of remaining part of drain at ward no 3 Tudipet infront of Parappa welding shop and construction of RCC drain and deck slab at ward no 22 Vasappa colony to north part of way to Chowdeshwari colony and construction of covering slab at ward no 19 Venkatarayara street circle to Doddaiah street of TMC Tarikere

Road Safety Works on Highway connecting Konanur with Makutta road (SH 91) from KM 12.80 to 12.90 KM ( In front of Neharus land Huluse Village and In Front of Sonu Welding Shop) and from KM 13.80 to 13.90 KM (Near Priya Hotel Kudige Village and In front of Rice Mill Kanive Village) in Kushalnagar Taluk Kodagu District.

Custom Bid for Services - MRPL Tender No 3900002015 ARC for Supply of Fabrication Manpower in Phase 1/2/3 Refinery units and Workshop as per SOW and BOQ and in GEM overall total lump sum rate to be quoted including GST Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

Bengaluru - Sampige Road sec : Fabrication of RH girders for the proposed pedestrian subways to facilitate crossing of railway alignment by cattle, Pedestrians and smaller vehicles in various locations as RCC box size 1x5mx2.65m in connection with speed increase upto 130 kmph (Total number of subways = 11 nos.) Maintenance period is 03 months

M S Fabrication, concertina wire fencing and C R Masonry and allied compound wall construction work

Design, fabrication and supply of Reflective Aluminium board of 1.4mm PU colour coated Aluminium sh (Q3)

Design, Supply of materials and Fabrication of Wheels on Heavy Duty Rail as per specifications (Q3)

Black Welding Glass 13 A Size 4 1 4 x 3 1 4, Black Welding Glass 12 A Size 4 1 4 x 3 1 4, Plain Welding Glass Size 4 1 4 x 3 1 4, Drill Chuck 1 2, Diamond Dresser 0.1 mm, Diamond Dresser 1 mm, Diamond Dresser 1.5 mm, Diamond Dresser 2 mm, Cutting Plier, Allen Keys 4 to 24 MM, Oxygen Regulator, Lighter