Fabrication Tenders in Maharashtra

Custom Bid for Services - 2324 1026 Grand total price including all applicable taxes duties for Fabrication erection replacement of dia 2 Sch 40 SS X 850Mtr line of Dry Instrument Air from SGP to HRSGGT Air Receiver under Yard Piping at RCF Tromba..

24B34L001 (ELECTRODE, WELDING FOR DMR 249A STEEL MMAW 4.0MM) N3439-003739 (Q3)

INCONEL 625, 1.6MM DIA WELDING ROD FOR Ni-BASE SUPPER ALLOY (Q3)

Dashboard Camera, Reverse Camera, Welding Rod, Lamination Sheet A4, Lamination Sheet FS

Cordless Metal Sheet Shears, Guillotine Shearing Machine, Hand Held Spot Welding Machine

i)TWR work in SUR-WADI section from Km 584.8 to Km 593.6 total 8.8 Km under ADEN/KLBG sub-division in SUR division & ii)Execution of flash but welding by MFWP with 52 Kg & 60 Kg rail at various locations under Sr.DEN/S/SUR section.

Bare Magnet Frame for Hitachi TM Type HS-15250A to drg. no. 10P.702.107,ALT-U with welding of Liners as per drg. no. 3/PLW/M/TM-SK-104,ALT-Y(Item no. 1) on item no. 2 and 11 of drg. no. 10P.702.107,AL

Custom Bid for Services - 8 inch MS Pipes Laying assembling and joining by welding of pipe lines with bends making etc and Dismantling and transportation of 8 inch M S pipe line from Pump station to Discharge end at Inder patch of AIKD OCP Nagpur Are..

Drill Beats-0.125 inch, 0.1875 inch Drill Beats, 0.15625 inch Drill Beats, 0.25 inch Drill Beats, Brass Gas welding Rod 0.0625 inch, 0.125 inches Brass Gas welding Rod, 0.625 inch MS Gas Welding Rod, MS Gas Welding Rod - 0.125 inch, 3.155 mm X 350 mm -1 Packet of 2.250 Kg., 2.5 mm X 350 mm - 1 packt of 2.250 Kg, 4.00 mm X 350 mm - 1 packt of 2.250 Kg

As per NIT

Refer Tender document

1) Construction of cc road from viju kajale to nitin kajale house 2) cc drain from shri. Bhagat house to shri. gore house 3) cc drain from shri. Jaiwar house to makode welding 4) cc drain from shri manik more to shri. dongre house 5) cc dain from ...

Procurement, Fabrication, Testing and Supply of Annular Elliptical Test Setup Assembly

Design, drawing, fabrication, inspection, testing and supply of“ Pressure Test Rigs”

PROPOSED FABRICATION and WORK ON EXISTING BURNING PLACE , DAREGAON , AT MALEGAON.

Fabrication, inspection and supply of Tungsten carbide tip punches for pelletisation

Snake Keeping Glass Box, Fabrication of Iron Stand for Snake Box

Development, Fabrication and testing of bi-stator linear electromagnetic thruster assembly

Supply, Fabrication, Installation, testing of supply air ducts in radioactive plant

Construction Of Structural Fabrication And Erection Of 750 MT Onion Storage

Supply fabrication inspection testing painting and delivery of Tetra Drum Container

Fabrication and supply of customized SS 304 Active water filtration system

PROCUREMENT OF CUTTING, FABRICATION AND INSTALLATION OF NON-ASBESTOS JOINING SHEET

Procurement of Brass welding rod, Paper Gasket Oil,Bolt Machine Hex,NB rod.

Inverter, Welding Machine, MFM Printer, Gumla, Installation BOQ Title INVERTER WITH ACCESSORIES BOQ

Supply, Installation and Commissioning of Inverter Based 440V AC/DC TIG Welding Machine.

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; CONTRACT FOR REPLACEMENT OF CORRODED STEEL STRUCTURE CROSS C CHANNEL SIZE 150 MM X 75 MM THK 54 MM AND OTHER MISCELLANEOUS STRUCTURES ANGLES PLATES ETC BE..

Custom Bid for Services - SUPHALA Installation of Cyclone Separator 2 NO, Custom Bid for Services - Fabrication Erection of Inlet Transition piece 1 NO, Custom Bid for Services - Fabrication Erection of Outlet rectangular box 1 NO, Custom Bid for ... - Fabrication Erection ...

Manufacturing with QAP fabrication erection commissioning and testing of 15 Ton Capacity Screw Stem Hoists for Sliding type Cross Regulating Gate of 2.3 M X 3.1 M size 3 Nos GhanadHivtad main canal of C.H. 81 80 M on 3A To Ghanand mail canal

Estimate for Manufacturing with QAP, fabrication, erection, commissioning testing of 15 Ton Capacity Screw Stem Hoists for Sliding type Cross Regulating Gate of 2.5 M X 4.0 M size-4 Nos and C.H. 9230 M on Link canal-1 and 8 Ton Capacity Screw Stem

Re-tender for Survey Design Fabrication Supply Installation Testing Commissioning of On-Grid SRT Project with Net Meter and RMS of 25 kW at BC Govt Girls Hostel Shirur Pune and 22 kW at BC Govt Girls Hostel Indapur Pune with CMC for 5 years

Repair and maintenance to Radial gate of size 12 x 5 mtr. 03 nos. such as replacement of wire rope, turn buckle, damaged rubber seal, nut bolts, applying anti corrosive black paint also fabrication and erection of CRCA covers for central drive at Gau

Fabrication and errection of Service Gate of size 2.0 x 2.3 M -1 Nos, Embedment parts, Worm and Worm Hoist 15 MT Capacity and Emergency Gate of size 2.0 x 2.30 M New size - 1 Nos. of Megha River Diversion of Bordinala Medium Project

Estimate for Manufacturing with QAP, fabrication, erection, commissioning testing of 15 Ton Capacity Screw Stem Hoists for Sliding type Cross Regulating Gate of 2.7 M X 3.7 M size-5 Nos and C.H. 13300 M on Link canal-1 and 8 Ton Capacity Screw S

Works for InHouse Fabrication and Mounting of Structure Pipeline and Sensing Line Work of Refuellers Category in the Range of 11KL to 20KL along with QC Testing as per Scope of Work Drawings GA Drawings P and ID Diagram and Tender Terms and Condition

Radial gate 12 x 8 mtr- 9 Nos greasing to radial gate hoist end drive unit, central drive unit, turn buckle, end arm pin, guide roller and locking box. Material, Fabrication and erection work of sheet cover at junction, cleaning of old cardium compou

Procurement, Fabrication, Transportation and Erection work of CRCA sheet Cabins along with allied work for End Drive Units (EDUs) of Radial Gate - 02 Nos per gate for Radial Gate 12 x 6.5 mtr - 41 Nos Total 82 Sets. 2. Inspection Ladder From Deck Bri

Manufacturing with QAP and fabrication and Erection of KT weir needle gates curved type size 2.21x0.5M weight as per relevant IS with all material, mild steel confirming to IS 2062, For KT weir No. 1 to 19 of Keloshi M. I. Tank Tal. Radhanagari Dist.

Dismantling of old Service Gate of 1.2X1.2 mtr 01 Nos, fabrication and fitting of Gate leaf of 1.2 X 1.2 mtr 01 No. Repair and Maintenance of 2.1 X 1.1 mtr Automobile Gate (Godbole Type) 19 Nos including Anticorrosive Painting of Parts,at Koradinala

Checking of all Radial gate (size 12.479 x 8.224 - 14 Nos) parts moving items nut bolt, Material fabrication and erection work of end arm and bracket junction flap, Dismantling of all gates rubber seals and nut bolts and fitting of new rubber seal an

Raising of BFV n AV chamber on Mumbai II trunk main with fabrication n erection of chamber cover at Vikhroli n Construction of new manhole chamber at Suman Nagar along with protection of BFV n AV chamber by providing safety grill fencing for AEOCTM

Repairs and Maintenance of canal Radial gate size 5.5 mtr X 4.5 mtr - 09 No. and Material, Fabrication and erection work of various sizes of Sliding type gates at Various Locations of Hatnur Right Bank Canal (13 to 49 km) at Tal. Yawal Dist. Jalgaon

Fabrication of Load Body of 9 Nos. TATA Xenon Yodhha Pick up Van and Installation of 8 Nos. Generator along with Shifting of 1 No. Water Mist Pump and Foam Tank from RIV to TATA Xenon vehicle for the use of Nagpur Municipal Corporation.

Custom Bid for Services - Supplying erecting testing & commissioning GI sheet 1 25 mm 18 SWG compliance to IS 2629 1985 to be used for fabrication of boxes panel boards at Dhoptala OCM of Sasti Sub Area Ballarpur Area Similar Category Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Work of Fabrication of 75 nos standard height coal tub body and under frame and 75 nos Low height Coal Tub Body and under frame at Area Workshop Chandrapur Area WCL Similar Category Operation And Maintenance Of Electro-Mechanical Installations

Custom Bid for Services - Fabrication and installation services for dodecane feeding system and cooling tower piping at RSMS facility as per attached specifications and site conditions at BARC Mumbai-85 Similar Category Piping Erection Service Maintenance and Pigging Service for Oil and Gas Pipelines

Custom Bid for Services - Work of Design and Fabrication of a suitable and portable hydraulic arrangement for cutting the underground mine roof bolts at Nandgaon UG Mine of HLSA AND DRC UG RSA Chandrapur Area WCL Similar Category Operation And Maintenance Of Electro-Mechanical Installations

1) Mounting Bracket as per drg. No.LE11443 Alt. a, with welding as per RDSO guidelines for IRSM-41 material and with Red Oxide Zinc Chromate Primer Coating] 2) Mounting Bracket as per RCF Drg No- LE11 [Mounting Bracket as per RCF Drg No- LE11443 Alt Nil or Latest]

Manual Metal Arc Welding Electrode,Class M4, Type of Coating:Heavy, size 4 mm. dia x 350 mm. length. Specification- RDSO Specification no. IRS M:28-2020 (Version 1.0), CODE- E23.12LR26 (Heavy Coated) as per IS:5206-1983 (Reaffirmed-2019). [ Warranty Period: 12 Months after the date of delivery ]

Custom Bid for Services - Fabrication of 05 (Five) nos of new pontoons for installation of dewatering pump sets in upcoming monsoon at Kolaripimpri Extn Opencast Mine of Wani North Area Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments