Fabrication Tenders in Punjab

END WALL CONSTRUCTION COMPLETE -NPP END FOR VANDE BHARAT DTC COACHES NOTE:(1)IN DRAWINGS "MIG WELDING (131) IS TO BE READ AS TIG WELDING (141)" AS PER DESIGN LETTER NO. MD46231 DATED 16.03.2024. (2)F

END WALL COMPLETE NPP END FOR PANTRY CAR OF LHB AMRIT BHARAT COACHES. NOTE:-(1)IN DRAWINGS "MIG WELDING (131) IS TO BE READ AS TIG WELDING (141)" AS PER DESIGN LETTER NO. MD46231 DATED 16.03.2024. (2)

HOSE PIPE ID 8MM FOR WELDING OXYGEN (BLUE), OD 15 MM, BURST PRESSSURE 50 KG/Cm2 (MIN). WORKING PRESSURE 20 KGS (MIN), AS PER IS 447-1988 OR EN 559, DESIRED BRANDS - ADOR WELDING, GATES INDIA, DUNLOP,

END WALL COMPLETE NPP END FOR PANTRY CAR OF LHB AMRIT BHARAT COACHES. NOTE:-(1)IN DRAWINGS "MIG WELDING (131) IS TO BE READ AS TIG WELDING (141)" AS PER DESIGN LETTER NO. MD46231 DATED 16.03.2024. (2)

Construction of covered pathway (Civil and Fabrication Work) at PGSC, Kapurthala. The approximate area available for executing the said work is 95Ft x 14.5Ft.

REPAIR OF HYD PUMP FOR MGS ENGR EQPT, HYD CYL ROD THREAD CUTTING, HYD CYL SEAL KIT, WELDING WORK, HYD CYL ROD NEW FITTED, LABOUR CHARGES

Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3), Umbrellas as per IS 2920 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Number of Auto Extension count 3 Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Umbrellas as per IS 2920 Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6770692 Dated : 09-10-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

FABRICATION AND CIVIL WORK NORTH AND WEST SIDE IN DUMPING GROUND, ADHRERA ROAD, KURALI

Designing and fabrication of incubator cells/cabin in Skill Development Centre at PAU, Ludhiana

Purchase of Two Fabrication of desilting Machine for 3 Wheeler Vehicle Piaggio APE B56 .

Purchase of water bozer including chassis and fabrication of body in M.C S.A.S Nagar.

Job Work for fabrication and fixing of office cubical at GE Engr Park Bathinda

For manufacture, fabrication, galvanisation, supply of 6000MT 220kV Normal tower material and Substation structures

Electrodes for manual metal arc welding of Carbon and Carbon Manganese steel - as per IS 814

Welding rod for Low and medium alloy steel Bidder Turnover (Last 3 Years) 4 Lakh (s)

P/L interlocking tiles in street of Malkit Mistry along with Bahia Welding near store 99

Filled 7 Cubic Meters Cylinder of mixture Gas of argon 98% and Oxygen 2% for welding

Portable DC Welding Generator as per RDSO specification no.TM/SM/20 dt.19.11.1992 First Revision 2021

WELDING SHOE Drg:PART NO. 1609201798, FOR HOT AIR GUN MODEL BOSCH-GHG 630DCE , MAKE- BOSCH ONLY

Electrodes for manual metal arc welding of Carbon and Carbon Manganese steel - as per IS 814

Fabrication upgradation of tech library customized charts, Tech trg simulater device PS 5 remote, Door mat, Tech trg device screw machine, Tech trg device Hammer drill machine

RC TRANSMITTOR SIYI MK15 FOR DRONE FABRICATION AND TRAINING PURPOSE, BLUE BALL PEN, BLACK BALL PEN, RED BALL PEN, PENCIL

RC TRANSMITTOR SIYI MK15 FOR TECH TRAINING ON DRONE FABRICATION, BLUE BALL PEN, BLACK BALL PEN, RED BALL PEN, PENCIL

Fabrication of shed for Dr. KP SINGH and Covering of open area for Dr. Ramesh Ramachandran lab

END WALL COMPLETE PP END FOR PANTRY CAR OF LHB AMRIT BHARAT COACHES. NOTE:-(1)IN DRAWINGS "MIG WELDING (131) IS TO BE READ AS TIG WELDING (141)" AS PER DESIGN LETTER NO. MD46231 DATED 16.03.2024. (2)F

HOSE PIPE ID 8MM FOR WELDING OXYGEN (BLUE), OD 15 MM, BURST PRESSSURE 50 KG/Cm2 (MIN). WORKING PRESSURE 20 KGS (MIN), as per Drawing: AS PER IS 447-1988 OR EN 559, DESIRED BRANDS - ADOR WELDING, GATES

HOSE PIPE ID 8MM FOR WELDING OXYGEN (BLUE), OD 15 MM, BURST PRESSSURE 50 KG/Cm2 (MIN). WORKING PRESSURE 20 KGS (MIN), as per Drawing: AS PER IS 447-1988 OR EN 559, DESIRED BRANDS - ADOR WELDING, GATES

HOSE PIPE ID 8MM FOR WELDING ACTYLENE (RED), OD 15 MM, BURST PRESSURE 50 KG/Cm2 (MIN). WORKING PRESSURE 20 KGS (MIN), as per Drawing: AS PER IS 447-1988 OR EN 559. DESIRED BRANDS - ADOR WELDING, GATE

CARBON COMPOSITE BASED 16 x 16 FPV CHASSIS FRAME FOR FABRICATION TRG PURPOSE, DNR 1555 CARBON FIBRE PROPELLER FOR TRAINING PURPOSE, HOBBYWING X 6 PLUS MOTOR CW FOR DRONE FABRICATION AND TRAINING PURPOSE, WHITE FILE COVER, HARD FILE COVER

CARBON COMPOSITE BASED 16 x 16 FPV CHASSIS FRAME FOR FABRICATION TRG PURPOSE, DNR 1555 CARBON FIBRE PROPELLER FOR TRAINING PURPOSE, HOBBYWING X 6 PLUS MOTOR CW FOR DRONE FABRICATION AND TRAINING PURPOSE, WHITE FILE COVER, HARD FILE COVER

HERE 4 GPS FOR DRONE FABRICATION AND TRAINING PURPOSE, RASBERRY PI 4B 4 GB FOR EMBEDDED SYSTEM TRAINING, PERMANENT MARKER BLUE, RING BINDER, HIGHLIGHTER

Hiring the services of a proof consultant for checking/ authentication of the test reports/ films of Radiographic tests of welding joints submitted by the agency hired for Radiographic testing of welding joints of penstock ferrules and gates of SPK

FABRICATION OF ONE WATER BOWSER (12KL) WITH WATER MONITOR UNDER SMART CITY MISSION,AMRITSAR-(2ND CALL)

Welding Electrode, M-5 Class, Heavy Coated ,4mm as per Specification No. IRS:M- 28/2020 or Latest.

P/F I/L Paver tile 60 MM jaswinder Kaur Jeet Sony Welding Sunil thekdar W.No 5

Const of road from HOUSE OF Gurmail Singh to HOUSE OF Kala welding ward no. 9 dhanaula

Construction of street with storm water pipe from Welding shop to Bikram Singh house ward no.01

RING COMPLETE (WELDING JOINT OF THIS ITEM SHOULD BE LEAKAGE PROOF), as per Drawing: LS16151 ALT 'a'

RING COMPLETE (WELDING JOINT OF THIS ITEM SHOULD BE LEAKAGE PROOF), as per Drawing: LS16151 ALT 'a'

GAS DIFFUSER FOR WATER COOLED WELDING TORCH AS PER TBI'S PART NO. 130P002026, MIGATRONIC'S PART NO. 80220309.

RING COMPLETE (WELDING JOINT OF THIS ITEM SHOULD BE LEAKAGE PROOF), as per Drawing: LS16151 ALT 'a'

Fabrication of Storage Structure (28 Mtr X 36 Mtr) for storing biomass/paddy straw bales

FABRICATION OF FRONT END LOADER AND BACKHOE ARM ON TRACTOR FOR NAGAR PANCHAYAT KIRATPUR SAHIB.

Fabrication and Installation of missing grill of green Belt under Elevated Road. (2ND Call) 3267000

supply fabrication and erection of tensile fabric shed size 90x40 sqft approx at dispatch area

Tender for Fabrication of 01 set (09 Nos.) New stop logs for Pandoh Dam Spillway

Regarding Supply Fabrication and Fixing of Class Room Benches as per Drawing for MRSPTU Bathinda

Combat Cloth for Fabrication of Anl Trg Camp Set Up, Trg Boards Citation Boards, Training Aids Mats, Prize Trophy, Tools Storage Device Bag

Fabrication of Outdoor Inspection Trg Shed, Spot Light Presenter for Tech Trg Room, P C Security Software, Opr Sys Software for PC, Micro Soft Office SW, Wall Mounted Key Holder Box BOQ Title BOQ ITEMS

Procurement of Welding Electrodes for the Plant for FY 2024-24 and FY 2025-26. Total Quantity as per NIT.