Fabrication Tenders

WELDING ROD, PAINT RFU ENA RED OXIDE, TURPENTINE OIL, GLUE ORDINARY, VOLTAGE REGULATOR

Rod Welding, Fevicol SR, Anabond, Feviquick, Thread Tape, Flux Soldering Paste, Soldering Wire

WELDING ROD, STEEL BAR FLAT, MS SQURE, MS IRON NET, MS ROUND, SCREW

WELDING ROD, CUTTING SCREW 19MM, CUTTING SCREW 18MM, PLYWOOD, ANGLE IRON, METAL STRIP

WELDING ROD, STEEL BAR FLAT, MS SQURE, MS IRON NET, MS ROUND, SCREW

WELDING ROD, ANABOND LIQUID, SHEET CELLULAR, SR 998, PINION DRIVE ASSY, SOLENOID SWITCH

welding rod, cutting blade, packing wire, flex 5x3, flex with iron frame 4x3

Welding Rod, 4 inch Grinder Blade, Nk, Oxygen Cyl Refill, Oxygen Cyl Regulator

Welding rod, MS Sheet 8x4 18 Guage, Magnetic Curtain BOQ Title BOQ BOQ

Structural Welding, Bore Repair, Bush Replacement & Restoration of 02 Nos JCB 3DX Super

FABRICATION, SUPPLY AND INSTALLATION OF MAIN DOOR MOSQUITO NET WITH POWDER COATED ALUMINIUM FRAME, FABRICATION SUPPLY AND INSTALLATION OF WINDOW MOSQUITO DOORS WITH POWDER COATED ALUMINIUM FRAME

Welding Electrode 3.15X450 MM. Spec FF77193 R03 (Q3), Welding Electrode 4.0X450 MM. Spec FF77193 R03 (Q3), Welding Electrode 5.0X450 MM. Spec FF77193 R03 (Q3)

CERIATED TUNGSTEN ARC WELDING ELECTRODE (SIZE 2.4X150 MM), CERIATED TUNGSTEN ARC WELDING ELECTRODE (SIZE 3.2X150 MM), CERIATED TUNGSTEN ARC WELDING ELECTRODE (SIZE 4.0X150 MM)

WELDING ELECTRODE SIZE 3.15 X 350 MM (Q3), WELDING ROD STAINLESS STEEL SIZE 3.15 X 350 MM (Q3), LOW HEAT INPUT WELDING ELECTRODE (Q3)

WELDING ELECTRODES CLASS E309CB-15 (SIZE: 3.15X350) (Q3), WELDING ELECTRODES CLASS E309CB-15 (SIZE: 4.00X350) (Q3), WELDING ELECTRODES CLASS E309CB-15 (SIZE: 5.00X350) (Q3)

SS COVERED ARC WELDING ELECTRODE (MAT. CODE HW7710395970), SS COVERED ARC WELDING ELECTRODE (MAT. CODE HW7710395988), SS COVERED ARC WELDING ELECTRODE (MAT. CODE HW7710395996)

WELDING ELECTRODES SIZE 5.0X450MM SPEC: AA7710103 R: 01, WELDING ELECTRODES SIZE 4.0X450MM SPEC: AA7710103 R: 01, WELDING ELECTRODES SIZE 3.15X450MM SPEC: AA7710103 R: 01

WELDING ELECTRODE 2.5 X 350M 7018-1 BIS, WELDING ELECTRODE 3.15 X 350 7018-1 BIS, WELDING ELECTRODE 4 X 450MM 7018-1 BIS

Fabrication AND Supply of Duct Attachments, Girder Pin, SS Fabrication, Machining, Stairs, Ladder through OSB route

THREE-PHASE INVERTER BASED PORTABLE WELDING MACHINE (Q3), SINGLE PHASE PORTABLE WELDING MACHINE (Q3)

Fabrication of 15 inch 3D letters, Fabrication of 30 inch 3D Unit Logo, Fabrication of Neon Letters, Required Electrical work and supplies, Installation Charges

Welding Helmet as per IS 5983 (Q3), DARK GLASS FOR WELDER'S SCREEN (Q3), Welding apron (Q3)

Supply of Welding Fume Extraction System (Q3), Erection and Commissioning of Welding Fume Extraction System (Q3)

3 PHASE RECTIFIER (INVERTER TYPE WELDING SET), SINGLE PHASE INVERTER TYPE DC OUTPUT PORTABLE WELDING SET

Supplying, Conjoining i/c laying on water of High quality water tight HDPE Floating Boom Barrier in Trunk Drain-I and Fabrication work for Structure of Conveyor belt as per design i/c installation etc. at different sites between RD-0m to RD-5260m und

Annual Maintenance Sewerage Scheme Rewari Town, repairing, painting and fabrication work of 1 No. coarse of 1 No. screen complete in all respect in MPS at 8 MLD and STP Nasia Ji Road, Rewari Town on account of miscellaneous advance of operation and m

WELDING ELECTRODE MS E6013 GENERAL PURPOSE SIZE 2.5MM X 350MM, WELDING ELECTRODE MS E6013 GENERAL PURPOSE SIZE 3.15MM X 350MM, MS WELDING ELECTRODE ISI MARKED E6013 4X450MM, WELDING ELECTRODE 2.5 MM E7018 Length 350MM, WELDING ELECTRODE E309 4X350, GAUGING ELECTRODE 3.15X350

Welding electrodes for Size 5.0X450MM, 4.0X450MM AND 3.15 X450MM

Supply, installation and commissioning of 3D Modular Welding Table

Supply of ERCoCR-A and H.A-25 welding rods

SUPPLY INSTALLATION AND COMMISSIONING OF Robotic MIG Welding Station

Purchase of Welding Consumables for Department of Mechanical (Workshop)

Welding Electrodes with Tungsten. Dia 5.0X450MM Specification FF77121 R01

PORTABLE ARC WELDING MACHINE, PORTABLE PRESSURE TESTING HAND PUMP

WELDING MACHINE TRFR OIL, SUPRA BINS BLUE, IRON RAMP

Welding Rod For Manual Metal Arc Welding Of Carbon And Carbon Manganese Steel-IS:814 (Q3), Welding Electrodes For Bus Body Building Parts - as per IS 814:2004 With Latest Amdmnt (Q3)

FABRICATION OF 914 MM NOMINAL DIA DELIVERY PIPE 4.50 METER LONG FROM 8 MM THICK M. S. PLATE BY CUTTING, BENDING AND ELECTRIC ARC WELDING OF 8 MM THICK M. S. PLATE

Procurement of RECTIFIER-WELDING MACHINE

Procurement of SIA WELDING ELECTRODE

Procurement of SIA WELDING ELECTRODE

MIG welding with power source

Procurement of Special Welding Electrode

Fabrication of Mould Box (SIDE FRAME), Fabrication of Bolster Mould Box (BOLSTER)

FABRICATION OF VIP LADDER STANDARD (Q3), FABRICATION OF VIP LADDER COLLAPSIBLE (Q3)

Fabrication and Supply of Adaptor Fuze, Fabrication and Supply of Pellet Holder

Fabrication and Supply of Adaptor Fuze, Fabrication and Supply of Pellet Holder

Fabrication of Bulk Head

FABRICATION OF WATER CHAMBER

FABRICATION OF SKIRT ASSEMBLY

SET OF FABRICATION ITEMS