Fabrication Tenders

FABRICATION ASSEMBLING WELDING TESTING OF 20 KL HORIZONTAL CYLINDRICAL TANK AT VARIOUS IOCL PREMISES UNDER BHOPAL INDORE JABALPUR AND RAIPUR DIVISIONAL OFFICES UNDER MADHYA PRADESH STATE OFFICE

Construction of 35.00 Mtrs span foot bridge over ChainthKhad at Village NiharDistt.Hamirpur HP SH Fabrication, Launching and erection of bridge including welding, primer coating, painting complete job.

Laying of CC road from Sindhu Hospital to MA Fabrication welding works shop in Madhapur, ward no.107, Chandanagar, Division-21, Slp Zone, GHMC (Item No.3)

Custom Bid for Services - Providing welding of 8flanges and 6 flanges for the pipes and fabrication of taper pieces of 8 and 6 pipes in Sasti OCM

Labour charges for dismantling of pipe lines, Jungle cutting and fabrication of pump sheds and flanges welding in GKOCP Quarry, Kothagudem area for the year 2021-22.

Repairing of Hoist gear pinion , Gear of hoist drum, welding of drum driven shaft, shaft supporting frames fabrication and fixing for HMB 550 Shovel of Purnadih Project

FABRICATION AND ERECTION WELDING, ALIGNMENT, SUPPORTING, FLASHING, HYDRO TESTING, PRE-COMMISSIONING, HANDING OVER ETC. OF ABOVE GROUND PIPING PACKAGE-1 FOR PFCC-PROPYLENE RECOVERY UNIT, NREP, ASSAM

Providing Repairs, Welding,Fabrication and painting to fencing for kerb plantation from Thatchetlapalem jn., to Marriot hotel jn., on both sides of NH-16 for G20 summit

1700164051 - Welding Electrode, Mild Steel, 3.15 mm x 350, 1600118142 - Welding electrodes for joining steel, 4 mm, 1700007467 - CUTTING ELECTRODE, 801, 04 MM, 1700005065 - CHAMPERING ELECTRODE 3.15 MM, 1700008087 - CHAMPERING ELECTRODE 4.00 MM, ... - Welding Electrode ... for welding difeernent ... - Welding Electrode ... for welding difeernent ... - Welding Electrode, ... for welding difeernent ... - Welding Electrode, ... - Welding Electrode, ...

SUPPLY FABRICATION ERECTION AND COMMISSIONING OF STRUCTURAL STEEL CANOPY AT ROS KSKS UNDER INDORE DIVISIONAL OFFICE UNDER MADHYA PRADESH STATE OFFICE

Steel Pipe 1 inch, Steel pipe 1.25 inch, Stainless steel welding rod 2.15 mm, Iron Cutter blade 4 inch, Welding goggles, Screw drive taparia, Cutting plier taparia, Welding Machine Small size, Welding Rod 3.15mm, Welding service Wire 4mm Multistand, ... inch, Welding Holder, ...

Virtual Welding Training Simulator, Multifunctunal welding cum cutting equipments, Welding table BOQ Title BOQ BOQ

Maintenance of water supply scheme in Aldona Constituency in Bardez Taluka - Repair and painting work of structural steel work supporting main conveying pipeline along NH 66 at various places in Aldona Constituency.

Dismantling of Mangalore Tile Roofing and providing and laying galvalium sheet roofing along with required structural steel work for sloping roof slab of barracks and parking area of Fire Station Ponda Goa.

REPAIRS TO STRUCTURAL STEEL WORK PARKING SHEDS ROOF SHEETS PIPE LINE PROTECTIONS STEEL RAILINGS AND OTHER CIVIL WORKS OF AREA C AND D AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE(I) DM VISAKHAPATNAM

Rough Cost estimate for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position on various drains of village Nawada Faridabad.

Rough Cost estimate for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position on various drains of village Chandawali Faridabad.

Rough Cost estimate for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position on various drains of village Neemka Faridabad.

AL WELDING WIRE 1.6MM, AL WELDING WIRE 3MM

9P5602007 FLANGE FOR WELDING, 9P5602008 FLANGE FOR WELDING

MS WELDING ELECTRODES 3.15MM, MS WELDING ELECTRODES 4MM

9P5602007 FLANGE FOR WELDING, 9P5602008 FLANGE FOR WELDING

HARD FACING WELDING ELECTRODE, Buffer layer welding Electrode

Aluminium Welding Cable (Q3), Copper Welding Cable (Q3)

WELDING MACHINE IGBT 600, WELDING MACHINE IGBT 400

HARD FACING WELDING ELECTRODES, BUFFER LAYER WELDING ELECTRODES

Strengthening of headgear structure by fabrication work as per structure stability test report considering safety of winding operations at Pit No. 2 and Pit No. B under Pandaveswar Colliery to comply DGMS violation under Pandaveswar Area

Miscellaneous repairing/Fabrication work of A) monkey catch- 20 sets, B) Stop block for track line-16 Sets, C), Friction roller and its frame making 20 Sets for 4/5/6 incline of Dhori (K) Colliery.

Custom Bid for Services - 200138680 CONTRACT FOR MISCELLENEOUS FABRICATION WORK TOE GUARD HAND RAILING FIXING AT ASH HANDLING AREA TO FACILITATE SAFETY OF WORK AREA NTPC LARA Similar Category Operation and Maintenance Power House/Power Plant

Reconditioning and treatment of load bearing steel structures of Transfer House (TH-9) near Ground Bunkers at New CHP of Dipka Expansion Project.

Structural Renovation including strengthening of Steel Structures of Coal Mill area, ESP, Boiler, Nuva Feeder area of Unit 1 to 5 at BkTPP.

Heightening of boundary wall with wire fencing & sanitary work to FFDC, Kannauj SH Heightening of boundary wall with GI Sheet and steel structures

Painting of Steel structures, Pipelines, Equipments and Tanks at AVU, CRU, SRU/SWS, WHFU and ETP Area of IOCL, AOD-Digboi Refinery, Assam.

Custom Bid for Services - Refurbishing and Painting of Steel Structures of J4C1 and J3C2 Galleries of Blast Furnace Unit KIOCL Limited Panambur Mangaluru

NIT 77 Work of cutting, threading, welding and fabrication on various sizes and type of pipes and all type fabrication/machinary works with material at various WSS under Jen Section Virat Nagar Urban, Sub Div Virat Nagar, Div Paota, Dist Kotputli-Beh

Laxmi fabrication--Laxmi Fabrication Composite Office Tables, Laxmi fabrication--Laxmi Fabrication Composite Office Tables confirming to IS 8126 Three-drawer unit

WELDING ELECTRODES, MILD STEEL, WELDING ELECTRODES, MILD STEEL (Size: 4.00 x 450 MM)

Welding Machine, Type: FTR Step- 600, Welding Electrodes Range: Min- 2mm, Max- 6.3mm

Identification of Consultancy firm/Civil contracting firm for Providing Not below the rank of Executive Engineer with an experience of more than 10 years in Govt Sector for monitoring of Civil/Electrical/Fabrication works at Lepakshi Show Room, New Delhi

Identification of Consultancy firm/Civil contracting firm for Providing Not below the rank of Executive Engineer with an experience of more than 10 years in Govt Sector for monitoring of Civil/Electrical/Fabrication works at Lepakshi Show Room, New Delhi

Providing roofing sheets, fabrication works, repairs to chainlink fencing, arresting leakages, Flooring tiles, inside and outside painting, repairs to water supply and sanitary works and other allied works to KK Annex Staff Quarters No. 24, 28, 48, 49 & 45, Bengaluru.

Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3) ( PAC Only ), Welding Electrode - Covered Arc Welding Electrode - Rutile Type (BEML) (Q3) ( PAC Only )

1 Arc Welding Plain Glass, 2 Arc Welding Plain Glass, 3 Arc Welding Plain Glass, 4 Arc Welding Plain Glass, 5 Arc Welding Plain Glass

1600671253 WELDING ELECTRODE 3.15MM X 3 LH E7018- A1, 1600671254 WELDING ELECTRODE 4MM X 350M LH E7018-A1, 1600671255 WELDING ELECTRODE 5MMX 350MM LH E7018-A1, 1600671256 WELDING ELECTRODE 2.5MMX 350 DS E312-16, 1600671257 WELDING ELECTRODE 3.15MMX 35 DS E312-16

Stainless Steel 316L Welding Electrode 2 point 50 mm, Stainless Steel 316L Welding Electrode 3 point 15 mm, Cast Iron Non-Machinable Welding Electrodes, Stainless Steel 309L Welding Electrode 2 point 50 mm, Stainless Steel 309L Welding Electrode 3 point 15 mm

Repairing of both side damaged Bucket eye Gouging, Fabrication of New eye and fitting in Bucket by Welding and 4 Nos. round support Plate by Welding and Full Length Square round 32 mm thickness extra Support by Bucket eye of BE1000 Hyd. Shovel

REPAIRING OF 04 NOS WORN OUT PIN BY WELDING AND TRUNION AND FABRICATION OF 04 NOS BUSH BY LATHE OPERATION AND REPLACING OF TWO NOS REAR ARM BY WELDING AND GRINDING OF WS28-11 WATER SPRINKLER SL NO 28002 OF DAKRA PROJECT.

Repairing of both side damaged bucket eye gousing , fabrication of new eye and fitting in bucket by welding and 04 Nos round support plate by welding and full length square round 32mm thickness extra support by bucket eye of BE1000 Hyd Shovel

EM III Fabrication and erection of one 1 No MS welding distribution box to replace the worn out MS welding distribution box in ESP Hopper area of Unit V and strengthening of existing 2Nos damaged 250W SVL light fitting pole and Re erection

Repairing of worn-out broken Eye End Welding, Grinding and New Bush Press Fitting of Arm Cylinder and Arm Cylinder Pin, Cutting of Machine New Pin Fabrication Welding and Machining of M/C Sl. No.-10226 of Kuya O.C.P, Bastacolla Area IX