Fabrication Tenders in Tamil Nadu

PNEUMATIC HAND GRINDING TOOL, SPEED: 35000 RPM; POWER: 0.26KW; AIRCONSUMPTION: 0.29CU. MTR/MM; WEIGHT: 0.3, TUNGSTEN CARBIDE ROTARY BURR CUTTER DIA 6MM, GRINDING WHEEL AG-4, DIA: 100MM, PIN GRINDING WHEEL DIA 6MM, WELDING TORCH (TIG) WATER COOLED 400 ... 6901, WELDING HELMET ... TIG WELDING

Welding apron (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6569000 Dated : 14-08-2025 Bid Document 1/7 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 960481 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Custom Bid for Services - Labour Cost for General furnishing Welding Carpentry Plumbing Trimming Painting and passenger amenity attention works in 118260 coaches of PM and SM trains at Coimbatore for 3 years, Custom Bid for Services - Rent cost for ... furnishing Welding Carpentry ...

Custom Bid for Services - 1 Supply Fabrication Erection and Installation of MS cage ladder using Structural Steel Members using Channels Angles MS rods Pipes plates etc Quantity one and a half Unit MT, Custom Bid for Services - 2 Cutting the existing ... and welding in ...

Welding Cable (V2) as per IS 9857 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 4, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number : GEM/2025/B/6918259 Dated : 24-11-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Custom Bid for Services - 1 Removal of resin in Strong Base Anion tank Quantity 1500 Unit Litres, Custom Bid for Services - 2 Carrying out shifting of structural steel SS FIM from CMM to SITE cutting Fabrication welding erection Quantity 60 Unit Kgs, ... Cutting fabrication fitup ... butt welding in ... Cutting fabrication fitup ... Flange welding Quantity ...

As per NIT Docs

As per NIT and SCC

MULTI - LAYERED HEAT RESISTANT APRON (Q3), MULTI- LAYERED HEAT RESISTANT PANT (Q3), FLAME RETARDANT WELDING COVERALL WITH CAP (Q3), Demineralised Water (Q3)

Supply and Delivery of Fabrication and Erection of Closed Tipper Body on your Tata Ace Chassis in Chettiyarpatti Town Panchayat

Supply and Installation of Assembly of 30V, 200 A load model, Power converter circuit and their accessories, casing, fabrication etc.

Fabrication and supply of BUCKSTAY CORNER ARRANGEMENT, PIPE CLAMP ASSY, SUPPORT PLATE, LINK PLATE and WELDED BEAM with BHEL materials

Fabrication Supply of SCR Variants, Trolley, S Ten Drain Plug, FGD Emergency Water Tank Item, Panki Duct through OSB model.

Supply,Fabrication,Erection of 1 No 230KVABS structure and switch in230KV Auto-III Main Bus Switch at 230KV Udt SS

Fabrication and erection of piping , ducting and installation of mechanical equipments of breathing air and ventilation system at OESC, kalpakkam.

Supply, Fabrication, erection, painting and Earthing system of substation auxiliaries for Power Transformer II ( 110/11 KVSS ) bay arrangement work

Fabrication, supply and erection of pipes, sleeves, valves and associated structural works for utility service system for FFP, FRFCF, Kalpakkam.

Supply, Fabrication, Erection, Installation and Commissioning of High Temperature Ovens for Oxide Production Facility at Zirconium Complex, Pazhayakayal, Tuticorin 628152

NCTPS II MI Circle MPM UNIT II Supply Fabrication and Erection of corner 2 working Platform for AB EF Elevations

NCTPS II MI Circle MPM UNIT II Supply Fabrication and Erection of corner 3 working Platform for AB CD Elevations

Design, Fabrication and Installation of custom display signage modules using cast polymethyl methacrylate (PMMA) sheets, UV-stabilized, precision laser-cut with polished edges, and solvent-based adhesion on CNC-routed back panels. Included high-adhesion graphic vinyl overlays with eco-solvent printed content. Mounting through concealed SS spacers or edge-embedded fasteners for a frameless floating appearance as per annexure enclosed.

Copper Tube, Copper Tube 3 8, Black Hose 5 8, Black hose, 5Sq mm 4 Core Wire, Air Condition Stand Heavy Outdoor, Air Conditioning Stand Indoor, Cotton Tape, Insulation Tape, Teflon Tape, 5 8 Bender, Welding Tin, Double Gun Welding Nozzle, A C Welding Rod, Capacitor 36, Capacitor 50, 3Mfd Capacitor, 1 5 Inch Screw, Plug Wood, White Cement, 410 Gas with Cylinder, R22 Gas with Cylinder, R32 Gas with Cylinder, 5MM PVC AC Strip Curtain, LED Tube Lights 40 WATTS

Custom Bid for Services - Design Fabrication Supply Transportation Civil works Installation Commissioning Data collection and transfer 1 year of O and M of 120 m tall lattice met masts at 3 locations in Odisha including Dismantling and Transportatio.. Similar Category AMC/CAMC of Wind Energy Power Plants Design, Supply, Installation, Commissioning and Maintenance of Grid Connected Ground Mounted Solar Power Plant Service Operation And Maintenance Of Electro-Mechanical Installations Operation And Maintenance Of Other Machines And Plants

Custom Bid for Services - Design Fabrication Supply Transportation Civil works Installation Commissioning Data collection and transfer 1 year of O and M of 150 m tall lattice met masts at 4 locations in Odisha including Dismantling and Transportatio.. Similar Category AMC/CAMC of Wind Energy Power Plants Design, Supply, Installation, Commissioning and Maintenance of Grid Connected Ground Mounted Solar Power Plant Service Operation And Maintenance Of Electro-Mechanical Installations Operation And Maintenance Of Other Machines And Plants

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Furniture, SS TRAYS (RACK SYSYTEM)- WELDING, GRINDING, POLISHING, BUFFING; Service Provider

Annual Rate Contract for the year 2022-23 for Machining / Fabrication / Chrome Plating / Nitriding / Assembly of jobs for Boiler Auxiliaries components

Fabrication and erection of partition Room for D Pumps area of AB CD passes of ESP Bottom ash D Pump area

Annual Maintenance contract for Structural works including Structural fabrication, erection painting, roof sheeting and FRP lining in BHEL - Trichy, Factory Complex

Custom Bid for Services - Design, Fabrication, Supply and Installation of SS Name Board Similar Category Non Paper Printing Services - Area Based

Diesel driven welding generator (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6938545 Dated : 04-12-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Diesel driven welding generator (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6938290 Dated : 02-12-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Custom Bid for Services - Schedule 1 Cost for Attention of welding and gas cutting of wagons at JTJ Wagon Depot 49 Members per day inclusive of service charges at 3 point 85 percentage on manpower cost inclusive of 18 percentage GST, Custom Bid for Services - Schedule 2 cost of EPF at 13 percent of 15000 ESI at 3 point 25 percent on Minimum Wages Bonus at 8 point 33 percent of Minimum Wages PMSBY and PMJJBY inclusive of 18 percentage GST, Custom Bid for Services - Schedule 3 Cost of ISO 9606 certificate for 49 welders with two years validity period inclusive of 18 percentage GST, Custom Bid for Services - Cost of Uniform and PPEs inclusive of 18 percentage GST Similar Category Support Services Support Services Support Services Support Services

Diesel driven welding generator (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6827286 Dated : 30-10-2025 Bid Document 1/9 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Pre Dispatch Name of the Empanelled Inspection Agency/Authority RITES Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Fabrication and Supply of Ceiling Girders for NTPC Lara 2x800 MW Chattisgarh and NTPC Singrauli 2x800MW Uttar Pradesh with Vendor MATERIALS (OVM)

LiftingTransportingComplete rewinding replacement of motor DE NDE bearing, fabrication of motor end cover bearing sleeve and Air washer Unit blower motor A

Supply fabrication and erection of 110KV ABS Structure and 110KV ABS WOE in 110KV Ponnapuram feeder Bus Switch at 230KV Udt SS

Design, development, fabrication, supply, installation and commissioning of 425kg Evacuation system with tilting arrangement for LPG bottling plant inside IPPL Ennore terminal

ICHP- Fabrication of travel drive gear box brake drum 6 Nos. for replacing the defective brake drum in Stacker and Reclaimer machines.

Fabrication and Maintenance of HTHP, FAC, MDV test loop and supporting systems and carrying out experiments at B 18 in PRPD Site

FABRICATION AND SUPPLY OF BURNER PANEL SOFA PANEL CORNER SOFA PANEL FOR NON NTPC PROJECTS WITH BHEL MATERIAL (OSB)-ANNUAL RATE CONTRACT

Fabrication of Toilet View Cutter at G.A road,Basin Bridge Road,E.V.K.Sampath salai,Allikulam,Hunters road in Div-49,53 58, Zone-5.

Manufacture and Supply of 3000 nos. RCC stay plates using 4mm dia HTS wire and fabrication of grills at Ayyampettai PSC yard

As per NIT Docs

AS per NIT Docs

Wire brush with handle for welding bead cleaning, MS Bolt cutting Blades, Pipe SS Grade 304, Sheet SS Grade 304, Perforated sheet SS, Plate MS

WIRE BRUSH WITH HANDLE FOR WELDING BEAD CLEANING, MS BOLT CUTTING BLADES, PIPE SS GRADE 304, SHEET SS GRADE 304, PERFORATED SHEET SS, PLATE MS

PROPOSED MS WELDING MESH AND SS NET MOSQUITO WORKS PART 1 OF CATTLE SHED AT B-CANAL ROAD IN DIVISION -07,UNIT-2, ZONE-1

FRH defective tubes replacement with fresh spool tubes of SS Material Fit up welding and applicable NDT at Unit2 Boiler of 2X660 MW Udangudi STPP

PROPOSED MS WELDING MESH AND SS NET ( MOSQUITO ) WORKS (PART 2) OF CATTLE SHED AT B-CANAL ROAD IN DIVISION -07,UNIT-2, ZONE-1

Welding Helmet as per IS 5983 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6951897 Dated : 01-12-2025 Bid Document 1/7 Number of Auto Extension count 3 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No