Fabrication Tenders in Uttar Pradesh

Fabrication of Side Wall, End Wall, Lav Side Wall and Roof Bearers (Carline) as per scope of work.

Facility Management Services - LumpSum Based - Industrial; Fabrication and Erecation of Boiler Tube; Consumables to be provided by buyer

Facility Management Services - LumpSum Based - Industrial; Fabrication & Erection Work In Boiling House; Consumables to be provided by buyer

Facility Management Services - LumpSum Based - Industrial; Fabrication & Erection Work In Mill House; Consumables to be provided by buyer

Custom Bid for Services - FABRICATION AND SUPPLY OF 5KL FOAM TANK AT GOOTY DEPOT Similar Category Support Services

Custom Bid for Services - Framework Agreement for Services for Fabrication Assembly Painting of MS Casing at BHELFSIP Jagdishpur

Custom Bid for Services - FABRICATION and ERECTION Platform and approach JOB IN Hoist and Actuator at NTPC Unchahar

Facility Management Services - LumpSum Based - Industrial; Fabrication Erection work Of Boiling House; Consumables to be provided by buyer

Supply and fabrication of switchyard fencing with wire mesh at 33/11 KV, S/S Mission Compound, Bareilly.

Custom Bid for Services - Terrace Fabrication of shed work in NHDC office Similar Category Repair and Overhauling Service

Fabrication and Supply of Mobile Chain Pully Stand at Transformers repair workshop Raebareily, Unnao, Sitapur, Lakhimpur and Hardoi

Custom Bid for Services - 200127677 JOB contract for fabrication erection work in CHPSTAGE IIIIII IV at NTPC UNCHAHAR

Facility Management Services - LumpSum Based - Industrial; Dismantling Fabrication Erection in Clarification House; Consumables to be provided by buyer

Supply of evacuation compressor, Commisiioning spares, 2 years operational spares, supervision and commisioning, Structural steel work in built up sections, Annual Maintenance Contract for 3 years

Fabrication of cable trench covers for cable trenches situated in BOP area of 3x210 MW, ATPS, Anpara, Sonebhadra. The trench cover size is 1350 mm x 500 mm

Fabrication of 6 no MS Concentric Expander 750mm Long of NB 600 x 750 with one side 600mm and other side 750 mm drilled Flanges 6 no MS Concentric Expander and Fabrication of 12 Nos Dissmentling Joints as per detailed BOQ attached

Fabrication and supply of Fiberglass (FRP) Mannequins, Models, Sculptures, Murals and Paintings for Azad Gallery at Prayagraj, Uttar Pradesh

CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING CLASS E7018, SIZE: 3.15MMX450MM LONG, CS ELECTRODES OF SMAW CLASS E6013, AS PER STANDARD AA7710103 SIZE: 3.15X450 MM, CS ELECTRODES OF SMAW CLASS E7018-1, AS PER STANDARD: AA7710113, SIZE: DIA 2.5X350 MM, SIZE: DIA3.15MMX450MM, SIZE: DIA4.00MMX450MM

Dismantling and Shifting of old and damaged Ms Aerzen make Air Blower Fabrication of steel structure and Erection and Commissioning of Everest make Two Numbers complete Air Blowers with Motor for Unit No 4 and 5 BTPS Anpara

Rectification/Repairing and reconditioning of different size of valves, repairing of valve block and fabrication of new sleeve ring, machining of super heater drain valves and repairing/reconditioning/fabrication of others miscellaneous items

Fabrication of Gate assembly and superstructure parts of Head regulator gates (2 Nos.) and Dy Gates (11 Nos.) of Shahjahanpur branch, Sharda canal, Shahjahanpur, U.P.

Rectification fabrication repairing and fixing of Idler frame and return Idler bracket of conveyors of PhaseI and PhaseII Crushing and Reclaim section at CHP Dudhichua.

Supply, Fabrication and installation of a Rainwater proctection .Tray type cover for a Welding Machine Panel. installed above the welding machine panel. fabricated from SS 304 grade stainless steel. the Tray shall be of size 850mm X 450 mm, made from 1.5 mm thick SS 304 sheet , and supported with a 25 mm X 25 mm X 5 mm SS angle frame , complete with stainless steel nuts, bolts, and fasteners. All corners Shall be properly welded to ensure a wtaer leak-proof construction, and all top edges shall be neatly folded. The drawing/ sample shall be approved by user, prior to bulk supply.

Fabrication/ manufacturing of cable trolley clamps for plough feeder of CHP Kakri Project. (For detailed description of work please refer to scope of work section of NIT).

Hariparvat Zone, Room No. 93, welding and repair work of tree-guards collected in the construction store located in Municipal Corporation.

COMPETITIVE e-bidding FOR SUPPLY OF WELDING ELECTRODES FOR VARIOUS COOP SUGAR FACTORIES IN UTTAR PRADESH FOR THE SEASON 2020-21

pole welding of damaged S.T. poles and construction of pole plinth of ST Pole in the area of EUDD-IV, Aligarh

Work of making plinth by welding the damaged STP and RS joist poles with angle/flat under Electricity Distribution Division-Jahangirabad.

CONNECTING OF PIPES EARTHING TO TOWER LEGS AND TACK WELDING BOLTS OF 220 KV AZAMGARH-II-AURAI LINE UNDER ETD, AZAMGARH

Welding and boring of housing of 2nd Intermediate shaft assembly of crowd system of BE 195B Vikash Shovel of Khadia Project

Work of making plinth by welding the damaged STP and RS joist poles with angle/flat under Electricity Distribution Division-Shikarpur.

Work of making plinth by welding the damaged STP and RS joist poles with angle/flat under Electricity Distribution Section-Dibai.

ELECTRODE FOR WELDING 4 MM X 450MM TO AWS: E-8018 G BRAND NAME- SUPERTHERM -NI (SPL) OF M/S D &

WELDING ELECTRODE TO SIZE 4 MM DIA X450 MM LONG TO CONFORM IS. 814: 2004 (LATEST VERSION) CODE NO. EB- (Q3) ()

Supply and stacking of 60 Kg/60 EI R260 grade rails AT welding portions under jurisdiction of Sr. DEN-II/Agra.

WELDING ELECTRODE FOR 125 MM HEAD EQUIVALENT TO OK-76.18 OF ESAB. SIZE 2.5 MM DIA X 350 MM LENGTH. (Q3)

Bijnor Village Rasoolpur Pirthi mai Bijnor Najibabad PWD road se Lakhan Singh Welding Walo ke Makan tak CC and Drain Work

Repairing OR re-welding of worn out tub base and drag and hoist drum grooves of 33BY72 draglines of Khadia Project.

In situ Reconditioning of CMS crossing using Robotic Welding Machine of RDSO & on cess/depot using H3C electrodes over LKO division.

Welding apron (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

WELDING AND GROUTING OF DAMAGE/CORORED ST POLE WITH THE HELP OF ANGLE BY INVITING RUNNING TENDER UNDER EDD-Ist BULANDSHAHR.

Development works of dragline section and making rooms for office, store, welding etc. for dragline bucket repair yard at Khadia Project

CARRYING OUT POLE WELDING OF DAMAGED POLES AND MAKING PLINTHS OF ST POLES AT EDSD-I GANJDUNDWARA UNDER EDD (RURAL), KASGANJ.

MANUAL METAL ARC WELDING ELECTRODES SIZE 5X 450MM CLASS A-2, as per IRS: M-28-2020 and IS:814-2004

S. S. WELDING ELECTRODES SIZE: 3.15 X 350 MM LONG CLASS-M5 TO IRS M 28/2020 AND IS: 5206/1983.

Welding Electrode, Class-M5, IS- 5206/03, E18.8MnR26, IRSM 28/201 7, Type of Coating: Heavy, Size:5.00 x 350 mm.

1.2 MM solid mig/mag welding WIRE ( CLASS-VII) IRS M-46 MAKE-GMM MIG 309 MAKE MODI HITECH INDIA LTD

WELDING ELECTRODE(SPECIFICATION- AWS/ASTM E12015/E12016/E12018), SIZE:3.15 X 450MM. MAKE-ADOR/D&H/ESAB/HONOVER ULTIMATTE or Equivalent.

Aluminium TIG Welding Filler Rod Drawing No./Specification- IS:1278,Type S-NG2, SIZE-5MM X 1METER, Type of material:- Aluminium.

RF Tube, CTK 15/2, Type DC030, PartNo.-704215, Make-Coherent, Suitable for Laser Cutting &Welding Machine. Accepted Make Brnad - COHERENT