Fabrication Tenders in Uttar Pradesh

Design, fabrication, replacement, cable connection, commissioningand testingof Air Circuit Breaker type L.T. Panel (Two no. Incoming, Two no. Outgoing and One no.Bus coupler) for the protection of all L.T. equipments

As per tender document

Rectification/Repairing and reconditioning of different size of valves, repairing of valve block and fabrication of new sleeve ring, machining of super heater drain valves etc during overhauling of boiler of Unit no. 05, 2x250MW, PTPP, Parichha, Jhan

Fabrication of Big zinc kettle at the premises of Electy. Fabrication Unit, Naini, Prayagraj

Fabrication of Small zinc kettle at the premises of Electy. Fabrication Unit, Naini, Prayagraj.

Fabrication and erection of wiremesh fencing of existing 11 0.4 KV Different capacity of T F and other related works, in the area of 33 avam 11 KV sub station Aminabad

Repairing and fabrication of exhaust muffler and its bellows, engine top cover and drill rod safety guard of 02Nos REL-650 Drills (RDC-1222 and RDC-1381) running at Kakri Project.

Fabrication of 1620 Nos. of Railing Post and 2060 Nos. of R.S. Joist at Site-1 parade ground for C.D.-4 Kumbh Mela, P.W.D., Prayagraj for Maha Kumbh-2025 at Prayagraj

Fabrication of 1620 Nos. of Railing Post and 2060 Nos. of R.S. Joist at Site-2 parade ground for C.D.-4 Kumbh Mela, P.W.D., Prayagraj for Maha Kumbh-2025 at Prayagraj

Repairing of Hinges and Locking arrangement of SBC Panel and Design, Fabrication & Installation of Sub Panel Doors of SBC Panel of LHB Coaches at ASH, GTNR & GKP depot of LJN Division.

Repairing / fabrication / fitment of sprocket wheel group, track chain guard, track roller broken bolt, Carousel assembly and Auto slip of IDM70E-I and REL750E-IV Drill machine working at Bina project.

WORK OF FABRICATION , PROVIDING AND FIXING OF DANGER PLATE , NUMBER PLATE AND PHASE PLATE AT 132 KV BARAHUWA-ANAND NAGAR AND 132 KV FCI-MAHARAJGANJ TRANSMISSION LINE UNDER ETD-II , GORAKHPUR

Fabrication of 1620 Nos. of Railing Post and 2060 Nos. of R.S. Joist at Site-3 parade ground for C.D.-4 Kumbh Mela, P.W.D., Prayagraj for Maha Kumbh-2025 at Prayagraj

Fabrication and Erection of 1 KL Oil Tank with Heater and Oil Tray at the Workshop Raibareilly, Dahi Chowki-Unnao, City Power House-Unnao, Sitapur, Hardoi and Lakhimpur under EWD-Lucknow.

Planning, Design, Engineering, Construction, Fabrication, Erection, Supply, Installation, Testing, Trial Run and Commissioning of Sewage Treatment Plant 1.5 MLD on turnkey basis including Operation and Maintenance of plant for four years.

Fabrication of 1621 Nos. of Railing Post and 2060 Nos. of R.S. Joist at Site-4 parade ground for C.D.-4 Kumbh Mela, P.W.D., Prayagraj for Maha Kumbh-2025 at Prayagraj

Work of Repairing, /Replacement Erection and Fabrication of Extensor plate, short post, decking plates, structures of conveyors and I beam of hopper shed of A CHP of CHD-III BTPS, Obra.

Design, Fabrication, Transportation, Supply, Installation, Testing and Commissioning of Steel Pontoons along with Floating Walkways for providing Floating Jetties at Ten (10) locations on NW 1 in the state of Bihar

Dismantling servicing fabrication and assembling of damaged parts of Hydraulic pump of SSC and clinker grinder of furnace bottom ash disposal system of unit no 4 and 5 2x500MW BTPS Anpara

WORK OF ERECTION OF 145 KV SECTION ISOLATOR AT 132 KV SS BILASPUR AND REPAIRING AND FABRICATION OF 145 KV VCB AT 132 KV SS RAMPUR UNDER ELECTRICITY TRANSMISSION DIVISION RAMPUR

Fencing of Walkway, overhauling of Redicon unit, Replacing of rubber seal,Procuring and Installing LED Light,Fabrication and erection of missing cover and Installing new Plummer Block at Guntanala Dam, Chitrakoot

Repairing of boom platform, boom cracks, boom pulley support grooves and extension of platform by fabrication for safe inspection of boom pulley structure of 24 / 96 Gaurav dragline of Bina project

Request for Proposal for design, fabrication, supply, installation, testing and commissioning and one-year operation and maintenance of decorative clock tower structure and horticulture works at Ravidas Chauraha, Lanka Zone, Varanasi.

Supply fabrication and installation of mobile power supply and regulated air supply unit for testing of PFS in all type of coaches. Detailed list of required items is attached in Annexure.

ROUND BLACK PLOUGH STEEL WIRE ROPE UNGALVANISED BASIC GRADE PERFORMED FABRICATION 6 X 3 6 CONSTRUCTION STEEL CORE RIGHT HAND ORDINARY LAY TENSILE STRENGTH 180KG/MM SQ. CONFIRMING SPECIFICATION TO IS

. Supply, fabrication and replacement of complete lower portion up to 400 mm height of existing Washing Tank as per Drawing No. 2TMS/CNB/DRG/2019/12, including cutting/removal of dama

SET OF CARLINE ASSLY. FOR LHB CHAIR CAR[ FABRICATION TO BE DONE AS PER PROCESS SHEET NO.PP13610 DATED 04.09.2009 COPY ENCLOSED] as per Drg.No. MP09RBCCAR VERSION 1 Packing Instruction - (Packing instr

Supply fabrication and installation of mobile power supply and regulated air supply unit for testing of PFS in all type of coaches. Detailed list of required items is attached in Annexure.

ROUND BLACK PLOUGH STEEL WIRE ROPE UNGALVANISED BASIC GRADE PERFORMED FABRICATION 6 X 36 CONSTRUCTION STEEL CORE. CONFIRMING SPECIFICATION TO IS: 2266 SIZE 20 MM DIA WITH TESTING CERTIFICATE FROM GOVT

Fabrication of moulded dust bin bracket stainless steel 304 grade 5 mm thickness, 304.8 mm height, 304.8 mm length and 160 mm breadth. One sample must be approved before bulk supply.

Supply, Fabrication and installation of mobile power supply unit and regulated air supply for testing of PFS in all type of coaches. Detailed list of required items is attached in Annexure

ROUND BLACK PLOUGH STEEL WIRE ROPE UNGALVANISED BASIC GRADE PERFORMED FABRICATION 6 X 36 CONSTRUCTION STEEL CORE RIGHT HAND ORDINARY LAY TENSILE STRENGTH 180 KG/MM SQ. CONFIRMING SPECIFICATION TO IS:

Fabrication & Supply of Complete Body Shell Assembly of 8-wheeler DETC/US type as per ICF Drg.No. DETC/US-1-0-001 and enclosed specification No. LCW/DHD/DETC/BSUS-01.

Construction of 1 No. Oil tank, fabrication of oil tray and its associated work and laying of G.I. Pipe line for flow of oil (Dirty, Fresh and Reclaimed) at workshop- Raebareilly.

Construction of 1 No. Oil tank, fabrication of oil tray and its associated work and laying of G.I. Pipe line for flow of oil (Dirty, Fresh and Reclaimed) at workshop- Hardoi

Custom Bid for Services - SELECTION OF AN EVENT MANAGEMENT AGENCY THE DESIGN FABRICATION INSTALLATION AND MAINTENANCE OF UPSRLM PAVILION AT UP INTERNATIONAL TRADE SHOW 2023 GREATER NOIDAUP 21Sep to 25Sep 2023

Removal of worn out undercarriage and fitment of new undercarriage assembly and its components and welding and co-axial boring of track roller pin housing of Pand -1900AL Shovel (Exc-1381) at Kakri Project

Routine/Breakdown maintenance of all Lighting panels /HPSV Lights/ACDB/DCDB/ELDB/LDB fixtures welding Receptacles and Lighting/emergency Transformer installed in 400/220 KV switchyard gantry/ LM Area and 400 KV MCB Building

Construction of road by Nali and C.C. Tiles from J - Block Trikone Park Road and Dharampals house to Rajpals house and Sefi Welding to K0 K0 Bajpayees house in Ward-27, Pallavapuram Phase- I

Block Mohammadpur devmal ke gram sahjadpur mein Yogendra welding ki dukaan se Talab Tak peyjal uprant jal ke sangrah nistaaran and punah upyog recycle hetu sokpit aadharit nikaasi pranali ka Nirman karya lot 19

Welding and co-axial boring of 3rd intermediate shaft outer bearing housing and 3rd intermediate shaft inner bearing housing and 2nd intermediate shaft bearing housing both side of 2 nos. propel gear box assembly.

SET OF PVC FLOORING FOR LHB TYPE ECONOMY COACHES WITH PVC WELDING ELECTODE DIA 3MM =90 METERS PER SET (ELECTRODE COLOUR LIGHT GREY TO RAL-7045) as per planning list umber : MPLPVCECONOMNY VERSION 1

Carrying work of guarding the lines, sagging, Wrapping, pole welding and other maintenance related work of electric supply etc. during Kanwar Mela under the jurisdiction of EUDD-(Technical) 11 KV and LT Line , MBD

Manual Metal Arc Welding Electrodes Size:4.00 X 450 mm, 8 SWG, E-6013, ER-4112 to IS 814 (Latest Version) Shall confirm to IRSM-28 ior (latest Version, Class-A1, Medium Coated. specn:

Stainless Steel Welding Electrode (MMAW) of Size: Dia 3.15 MM X 350 MM length, Class: M4, type of coating: Heavy .(Specn No. IRS M-28/20) . NOTE: Manufacturer's Test Certificate should be submitted a

SET OF PVC FLOORING FOR LHB TYPE ECONOMY COACHES WITH PVC WELDING ELECTRODE DIA 3MM=90 METERS PER SET (ELECTRODE COLOUR LIGHT GREY TO RAL-7045) as per planning list number: MPLPVCECONOMY VERSION 1.

Eletra Koko-Tawa Welding Machine >=5<=10 kVA Rated Input Power Brand: Eletra Koko-Tawa (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687707529557 dt.05/05/20

Manual Metal Arc Welding Electrode, Size: 3.15X350 mm, Class M1, Type of Coating: Heavy, conforming to Spec. No. IRS: M-28/2020, Code E19.9R26 as per IS: 5206-1983 (Reaffirmed 2019. Accepted Make / Br

5 mm Dia Manual Metal Arc Welding Electrode, Class: D, Type of Coating: Heavy, conforming to Spec. No. IRS: M-28/2017, Code:E8018W2 as per AWS A 5.5. Accepted Make /Brand : Firm's Own Make

Aluminium Conductor Welding Cable (HOFR Covering) Cable size:95 mm square, rated current in amperes at 60 percent duty circle:438A, min. weight of conductor/Mtr length of cable: 253.90 gms to IS:9857/