Loading
Loading…
Loading…
857 results • Best match
Procurement of Benjo Body liner and liners for End cover plate with fasteners for coal burners installed at Unit 3 and 4, PH II, SGTPS, MPPGCL, Birsinghpur
LV6-MT1 5120-000358 1, LV7-HMV-6X6-TML 2231-7050- 9902, LV7-T-815 207-490-183-4, LV7-T-815 4X4 442-973- 560-404, LV7-TATA 3122841020, LV7-TMB 2575-4232- 0104, LV7-TMB 2573-2910-0161, Tool Kit CVD-F2341100, Tool Kit CVD-F2341500, Tool Kit CVD-F2341000, LV7-LD CVD-X-3922400
SPL. STUD M30X127-8.8 SPH. WASHER LOCKING WASHER and HEX NUT M30-4, STUD M33X180-8.8 AND NUT HEX PM33-8., SPECIAL BOLT M42X140- 8.8., HEX SCREW M- 42X100-8.8, STUD BP M30X170-8.8, STUD M48X330 AND HEX NUTS M48, STUD M56X400 AND HEX NUT M56., STUD A M16X45-6.8 AND TWO NUT HEX M16-8., STUD A M16X100-6.8 AND TWO NUT HEX M16-8., STUD B M24X110-6.8 ANDTWO NUT HEX M24-6., STUD A M30X190- 6.8 AND TWO NUT HEX M30-6.
Rubber Liner of size 1000x500x100 mm with fasteners and all accessories, Rubber Liner of size 1000x500x80 mm with fasteners and all accessories, Rubber Liner of size 1000x500x60 mm with fasteners and all accessories, Rubber Liner of size 1000x500x40 ... with fasteners and ... with fasteners and ...
Procurement of complete throat plate assembly with fasteners for 8.5 E 9 Coal mill of unit no 1 to 4 PH-I and II at SGTPS MPPGCL, Birsinghpur
HALL EFFECT ACTIVE SPEED SENSOR Assly (WITHOUT WHEEL, PLATE, CONNECTOR & FASTENERS) SUITABLE FOR IGBT 3-PHASE LOCO AS PER CLW Specn No. CLW/ES/3/0528 Alt. 'A'
UCON Fasteners-Single Coil Rectangular Section Spring Lock Washers Type B (Spring Lock Washers with Flat (Square) ends Right Hand 12 Electrogalvanized Brand: UCON (Detailed Description/Specification a
Portable Fire Extinguishers (V2) as per IS 15683:2018 (Q2), Fire Beaters (Fire suppression hand tools) (Q3)
Procurement and Erection of Rigid type Discharge Electrode made of formed pipe with fixing clamp and fasteners for ESP installed at Unit No. 3 and 4, SGTPS, MPPGCL, Birsinghpur.
Procurement of Metallic expansion Bellows along With H T fasteners for Tubular Type Air Pre heater of Unit No 1 and 2 for PH I at SGTPS MPPGCL Birsinghpur
Procurement of Hexagonal head M.S. and S.S. Fasteners for AHP BMD and TMD WT of unit no 1 to 4 of PH I and II at SGTPS MPPGCL Birsinghpur
5 mm Non absorbable helical fastener made up of medical grade stainless steel covered with atraumatic polymer cap (PEEK) to avoid metal exposure with 30 fasteners indicator. (Hernia Tacker)
Supply of Non-metallic expansion Joints fabric plus bolster with fasteners for Air pre-heater of PH-I and PH-II, at, SGTPS, MPPGCL, Birsinghpur. As per Tender Schedule.
Procurement of Spares (fasteners) for HPT module for 210 MW KWU design TG set installed at unit no. 3 and 4 at, SGTPS, MPPGCL, Birsinghpur. As per Tender schedule.
Procurement of complete wear plates with CS fasteners for mill housing and ball filling door and relief gate of 8.5 E9 ABL mill of PH I SGTPS, MPPGCL, Birsinghpur
Procurement of various size HT, MS and SS Fasteners, MS Unions and Nipples for AOH of ESP and Ash handling plant at 2X 600 MW units, SSTPP, MPPGCL, Dongalia
WHEEL MOUNTED BRAKE DISC WITH ALL FASTENERS / ACESSIORIES TO DRG No. (ICF/SK3) 32902045 AND AS PER ICF MD SPEC-419 (LATEST REVISION/AMENDMENT) FOR TRAINSET, MEMU/US BOGIES.
Procurement orifice plate with fasteners for P.F. discharge pipe of 8.5 E-9 coal mills installed in unit no. 3 and 4, at SGTPS, MPPGCL, Birsinghpur. As per Tender schedule.
Procurement of classifier upper cone liner sets with C.S fasteners for 8.5 E-9 coal mills of PH-II and PH-I, at, SGTPS, MPPGCL, Birsinghpur. As per Tender Schedule.
86999330, 86999331, 86999332, 86999333, 86999334, 86999335, 86999336, 86999337, 86999340, 86999341, 86999342, 86999343, 86999344, 86999345, 86999346, 86999347, 86999348, 86999355, 86999357, 86999360, 86999361, 86999362, 86999364, 86999365, 86999366, 86999367, 86999369, 86999370, 86999371, 86999372, 86999373, 86999374, 86999382, 86999384, 86999390, 86999392, 86999394, 86999395, 86999399, 86999400, 86999403, 86999405, 86999406, 86999407, 86999408, 86999409, 86999410, 86999411, 86999412, 86999414, 86999415, 86999416, 86999417, 86999418, 86999419, 86999422, 86999423, 86999425, 86999426, 86999427, 86999428, 86999429, 86999431, 86999432, 86999433, 86999435, 86999436, 86999437, 86999438, 86999439, 86999440, 86999441, 86999442, 86999443, 86999447, 86999449, 86999451, 86999454, 86999456, 86999457, 86999475, 86999476, 86999477, 86999478, 86999479, 86999480, 86999481, 86999482, 86999483, 86999484, 86999486, 86999487, 86999488, 86999489, 86999490, 86999492, 86999493, 86999494, 86999495, 86999730, 86999731, 86999732, 86999739, 86999740, 86999741, 86999743, 86999744, 86999745, 86999746 WASHER, LOCK, HELICAL SPRING, REGULAR (MEDI, P/N: MS35338-134 ; M/S.ANY QPL, WASHER, LOCK, HELICAL SPRING, REGULAR (MEDI, P/N: MS35338-135, M/S.ANY QPL, WASHER, LOCK, HELICAL SPRING, REGULAR (MEDI, P/N: MS35338-136 ., M/S ANY QPL., WASHER, LOCK, HELICAL SPRING, REGULAR (MEDI, P/N: MS35338-137, M/S.ANY QPL., WASHER, LOCK, HELICAL SPRING, REGULAR (MEDI, P/N: MS35338-138, M/S. ANY QPL, WASHER FLAT METAL ROUND GENERAL PURP, P/N: MS15795-802, M/S.ANY QPL., WASHER FLAT METAL ROUND GENERAL PURP, P/N: MS15795-803, M/S.ANY QPL, WASHER FLAT METAL ROUND GENERAL PURP, Bid Number : GEM/2025/B/6541276 Dated : 06-08-2025 Bid Document 1/75 P/N: MS15795-809, M/S. ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, #0 SIZE, .01, P/N: NAS620C0, M/S. ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, #10 SIZE, .0, P/N: NAS620C10 .M/S. ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, #2 SIZE, .01, P/N: NAS620C2; M/S.ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, #4 SIZE, .03, P/N: NAS620C4, M/S.ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, .250IN, .063, P/N: NAS620C416, M/S.ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, LIGHT, #4 SI, P/N: NAS620C4L, M/S. ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, #6 SIZE, .03, P/N: NAS620C6, M/S.ANY QPL., WASHER, FLAT, PLAIN, REDUCED OD, #8 SIZE, .03, P/N: NAS620C8, M/S. ANY QOL., WASHER, SPRING LOCK, HELICAL, HI-COLLAR, #0, P/N: NAS1640-0 .M/S. ANY QPL., NUT RETAINER, 100 DEG. FLUSH HEAD, SLOTTED, P/N: D791639-6-A.M/S.ARCONIC, NUT, REDUCED HEX, FLANGED, SELF-LOCKING, ELL, P/N: MS21042-4 M/S.ANY QPL., NUT, PLATE, TWO LUG, WITHOUT EYELETS, FLOATI, P/N: MS21076-3N .M/S.ANY QPL., NUT, MACHINE, HEX, PLAIN, NON- LOCKING, INCH S, P/N: MS35649-224 .M/S.ANY QPL., NUT, MACHINE, HEX, PLAIN, NON-LOCKING, INCH S, P/N: MS35649-244 M/S.ANY QPL., NUT, MACHINE, HEX, PLAIN, NON- LOCKING, INCH S, P/N: MS35650-304 .M/S.ANY QPL, NUT, HEX, PLAIN, NON-LOCKING, THIN, INCH SERI, P/N: NAS671C10, M/S. ANY QPL., NUT, HEX, PLAIN, NON- LOCKING, THIN, INCH SERI, P/N: NAS671C2, M/S. ANY QPL., NUT, HEX, PLAIN, NON-LOCKING, THIN, INCH SERI, P/N: NAS671C4, M/S. ANY QPL., NUT REDUCED HEX FLANGED SELF-LOCKING ELL, P/N:MS21042L08, M/S.ANY QPL., NUT, PLATE, TWO LUG, FLOATING, SELF-LOCKING, P/N:MS21060L4, M/S. ANY QPL., NUT, PLATE, TWO LUG, FLOATING, SELF-LOCKING, P/N:MS21060L5, M/S.ANY QPL., NUT, PLATE, TWO LUG, WITHOUT EYELETS, FLOATI, P/N:MS21076-4N, M/S. ANY QPL., NUT, HEX, FLANGED, SELF- LOCKING, ELLIPTICALL, P/N:NAS1291C04M, M/S. ANY QPL., NUT, HEX, FLANGED, SELF-LOCKING, ELLIPTICALL, P/N:NAS1291C3M, M/S. ANY QPL., SCREW, CAP HEAD, HEX SOCKET RECESS, FULL SH, P/N: MS16995-10 .M/S.ANY QPL., SCREW, CAP HEAD, HEX SOCKET RECESS, FULL SH, P/N: MS16995-18 M/S.ANY QPL., SCREW, CAP HEAD, HEX SOCKET RECESS, FULL SH, P/N: MS16995-9; M/S ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C2 M/S.ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C25 .M/S.ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C26 .M/S. ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C3 ;M/S.ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C33 M/S.ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C5; M/S.ANY QPL., SCREW, MACHINE, 100 DEG. FLUSH HEAD, CRUCIF, P/N: MS24693-C8 M/S.ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-13. M/S. ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-14, M/S.ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-15. M/S. ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-16 .M/S. ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-17 M/S. ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-18 M/S. ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: MS51957-19 .M/S. ANY QPL., SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, P/N: Bid Details 2/75
Supply of Nut Bolts, washer for Raw water pump house Hirani, CWPS No. 1 Khatpura and CWPS No. 2 Ahmadpur Pump House Under Narmada Water Supply Project
Supply of tools and plants for repairing of Handpump District Morena
Procurement of classifier center sleeve coal inlet pipe with HT fasteners for 8.5 E-9 coal mills of unit no. 3 and 4 at SGTPS, MPPGCL, Birsinghpur. As per tender schedule.
Supply of Non metallic expansion joints Fabric Bolster with fasteners for air pre heater of unit no. 3 to 4 of PH-II at SGTPS, MPPGCL, Birsinghpur. As per Tender schedule.
Procurement of Gate Valves, Globe Valves and check valves with both end counter flanges and HT Fasteners for water circuit in TG Building and HVAC System of 2x600MW SSTPP, MPPGCL, Dongalia
LV7 TATA 2069-5010 8206 AUX WATER TANK COVER, LV7 STLN VF 2530-72-0472270 BREAK SHOE, LV7 MARUTI 84536M80121 GLASS FRONT DOOR LH, LV6 NT1 6640, 003277 FUNNEL OIL 152MM OVEL, LV7 MARUTI 09913M75520 BEARING INSTALLER, LV7 MARUTI 11360M71C00 COVER ... INSIDE, TOOL KIT CVD ... DIA, TOOL KIT CVD-X-4700811 ... 12X13MM, TOOL KIT CVD- ... CYL, TOOL KIT CVD ... BAR, TOOL KIT CVD ... SHACKLE, TOOL KIT CVD ...
Wheelbarrows-IS 2431 (Q3), Tricycle Or Rickshaw-IS 14887/2014 (Q3), Safety Equipment Tool Kit for Labours (Q3)
Procurement and erection of Rigid type discharge electrode made of formed pipe with fixing clamp/fasteners of ESP of unit no. 3 or 4 , at, SGTPS, MPPGCL, Birsinghpur. As per Tender schedule.
Procurement and erection of Rigid type discharge electrode made of formed pipe with fixing clamp/fasteners of ESP of unit no. 3 and 4,at, SGTPS, MPPGCL, Birsinghpur. As per Tender schedule.
Procurement of various consumables general fasteners bearing shims required for overhauling for TG set and TG auxiliaries of unit no 1 and 2 2x210 Mw of PH I at SGTPS MPPGCL Birsinghpur
BA01, BB09, BQ69, BB02, BM09, BB57, BB13, BB03, BQ75
BOLT M12 x 60 LONG SA 193 GR.B7, NUT M12 SA 194 GR 7, HEX NUT M12 SA 479 TP 304, BOLT M20 x 100 LONG IS 1364 P8.8, NUT M20 IS 1364 P8, STUD M20 x 120 LONG SA 193 GR-B7, HEX NUT M20 SA 194 GR 7, BOLT M24 x 130 LONG IS 1364 P8.8, HEX NUT M24 IS 1364 P8, BOLT M12 x 60 LONG SA 193 GR B7, WASHER 20 IS 1079, STUD M24 x 280 LONG SA 540 GR B23 CL 4, HEX NUT M24 SA 540 GR B23 CL 1, WASHER MCD 40 DIA X 4 THK SA 540 GR B23 CL 1, CAP M24 SA 540 GR B23 CL 1, CASTLE NUT M24 SA 540 GR B23 CL 1, SPLIT PIN IS 549 SS
SS FLANGES, FITTINGS AND FASTENERS
Roof shed Sheet 18 ft, Roof shed Sheet 14 ft, MS pipe 2 Inch 888 ft, MS pipe 1 Inch 176 ft, Screws, Nut, Bolts, Hinged Doors, Plinth Preparation
Socket 1.25 Inch For HP (Q3), Nut Bolts For HP (Q3), GI Pipe 3 meter 1.25 inch (Q3), Check Valve For HP Pipe (Q3), Vasher Set For Handpump (Q3)
Spanner Set Kit, Oil Filter Wrench, Circlip Pliers external and Internal, Screw Driver Tool set kit, Tool Kit Bag
Procurement and Erection of rigid type Discharge Electrode made of formed pipe with fixing clamp, fasteners for ESP of Unit no. 3 and 4, 2X210 MW of PH-II, at SGTPS, MPPGCL, Birsinghpur.
SUPPLY OF RETRO REFLECTIVE STRUCTURE NUMBER PLATE COMPLETE SET WITH FASTENERS. EACH SET COMPRISES OF (1) RETRO REFLECTIVE STRUCTURE NUMBER PLATE AS PER RDSO SPEC.NO.ETI/OHE/33A (12/97), REV-8 (11/2012
Mesh wire fixing arrangement along with the fasteners per tank to ICF Drg No: 72763007, Alt b, item number 15, 16, 17, 18, 19, 21 & 22. Accepted make/brand: Firm`s own make.
Procurement of Full Round and Half Round Screen Plates along with Lifting and Deflector shelve and set of fasteners for Rotary Breaker Primary Crusher RB 2 installed at 4x210MW CHP I SGTPS MPPGCL Birsinghpur
Procurement of liner set for PF discharge spool piece with fasteners for 8.5 E-9 coal mills of unit No. 3 and 4 of PH-II at SGTPS, MPPGCL, Birsinghpur. As per tender schedule
Procurement of element blade assembly for gear box to booster pump coupling of TDBFPs and Fasteners set for BFP Couplings installed in Unit 3 and 4 at 2x660 MW, SSTPP, stage II MPPGCL, Dongalia
CRASH WORTHY FAN GUARD ASSEMBLY (TOP AND BOTTOM) COMPLETE WITH BEADING PROVIDING SECURING CLAMPS AND 2 CLIPS WITH SECURING FASTENERS MADE OF POLISHED STAINLESS STEEL GR. 304, AS PER ICF DRG No. ICF/SK
Supply of 5/2 Puh pull spring return valve -1/4 Inch (With mounting brackets, Knob, connectors, Fasteners) designed for pressured flushing system as per MDTS 19027 Rev.01 Make = SPAC Item Code. SPAC00
Underslung MEMU Traction Motor(without gear case) of Type TME-49-35-4 and fasteners including termination crimping lugs, cable markers with heat shrinkable sleeves for cables, mating connectors, equipment mounting and earthing hardware
Underslung MEMU Traction Motor(without gear case) of Type TME-49-35-4 and fasteners including termination crimping lugs, cable markers with heat shrinkable sleeves for cables, mating connectors, equipment mounting and earthing hardware
BR71, BX07, BB02, BS48, BA02, BB13, BS45, BA08, BF77, BQ74, BP81, BP85, BA84, BS54, BB03, BA82, BQ69, BS47, BM09, BA103, BS46, BM23, BB57, BS53, BS44, BB12, BB10, BB06, BA01
Kahalgaon BOLT, Kahalgaon NUT, Kahalgaon WASHER, Korba BOLT, Korba NUT, Korba WASHER, Rihand BOLT, Rihand NUT, Rihand WASHER, Singrauli BOLT, Singrauli NUT, Singrauli WASHER, Vindhyachal BOLT, Vindhyachal NUT, Vindhyachal WASHER
Beutician Tool Kit (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Experience Criteria, Past Performance, Bidder Turnover *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/7035853 Dated : 23-12-2025 Bid Document 1/8 Number of Auto Extension count 1 Past Performance 10 % Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 300000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No
Procurement of spares for HPT/IPT/LPT module fasteners and for governing system overhauling of unit no. 3 and 4 of 210 MW KWU design TG set at SGTPS, MPPGCL, Birsinghpur. As per Tender Schedule.