Hardware & Tools Tenders in Tamil Nadu

Set of Galvanised fasteners consisting of following four items. 1) Hex head Screw M10 X 35 mm property class 8.8 as per IS: 1364/2002 Part-2 - 1 No /set. 2) Spring lock washer B10 as per IS 3063:1972

Electrician tool kit (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6345891 Dated : 14-06-2025 Bid Document 1/7 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Set of stainless steel fasteners. Set co [Set of stainless steel fasteners. Set consists of 2 sets of items as given below: 1) M10 x 40mm, SS304 fully threaded bolt-01 No, Nut -01 No, spring washer-01 No and flat washer-2 Nos of grade A2-70 to IS 1364 (All stainless steel)-600 Nos/set. 2) M12 x 50mm, SS304 fully threaded bolt-1 No, Nut -01 No, Spring washer-1 No and flat washer-2 Nos, of grade A2-70 to IS 1364 (All stainless steel)-100 Nos/set ]

Kadai, Insulated cans for storage of Fresh Neera, Perforated molds or die, Wooden Ladle, Canteen Burner LPG fired BOQ Title BoQ bid for procurement of tools and equipment for Palmgur under ABFPI

SUPPLY OF COMPLETE SET OF RADIAL SEALS AXIAL SEALS BY PASS SEALS WITH HOLDING STRIPS and FASTENERS ROTOR POST SEAL FOR UNIT IV and V AIRPREHEATERS MODEL 27 VITM 2000 DOUBLE SEALING ARRANGEMENTS FOR 1 APH COMPLETE HOT END and COLD END

The Scope of Work includes Handling, transportation, welding of leg supports and erection of tanks in FFP pit at El (-)8.2m. and erection of 1 no. of Saddle supported tank in RUP at El (-) 5.2m. at FRFCF, Supply and installation of SS fasteners

SET OF FASTENERS FOR WAP7 LOCO ROOF FITMENT. ITEM NO 1. HEXAGONAL HEAD BOLT ZINC PLATED ( PASSIVITY) AS PER IS 1364-s-8.8 Gr. A TO IS: 1367.A) M16 X 70 MM (45MM THREADED LENGTH)- 1NO/SET, B) M24 X 85

SET OF FASTENERS (FOR TMB/MRB FILTER FIXING) FOR 3-PHASE LOCOS. SET CONSISTING OF 03 ITEMS AS FOLLOWS:- (1)SS 304 H.H. BOLT M10 x 25MM - 01 NO/SET (2) SS 304 H.H. BOLT M10 x 30MM - 01 NO/SET (3) SS

SET OF FASTENERS FOR WAP7 LOCO ROOF FITMENT. ITEM NO 1. HEXAGONAL HEAD BOLT ZINC PLATED ( PASSIVITY) AS PER IS 1364-s-8.8 Gr. A TO IS: 1367.A) M16 X 70 MM (45MM THREADED LENGTH)-1NO/SET, B) M24 X 85

SUPPLY OF GA TREAD PLATE TO PART NO.1181940- 1 NO,GA FIXED TREAD PLATE END FIXINGS AND FASTENERS KIT PART NO.1166041-1 NO FOR VERSION-2 DELLNER MAKE (PART OF VB SEALED GANGWAY TO ICF DRG NO 728-2-5-00

Set of fasteners for Modified Hood for Emergency Alarm Valve to Drawing number ICF/SK-3-5-266, Alt:e/nil consisting of 6 items :(1)Lock Plate 3.15 x 25 x 70, item no.13, Qty. 01 No. (2) Spring Lock Wa

Set of sand pipe bracket with pipe, clamp and fasteners. One setconsist of 05 items and 14 Nos only. 1). Sand pipe bracket to Drg no B/TRS/G7/BOGIE/3/221 Alt nil : 2 nos / set , 2) Pipe for sand gear

SC110090524-M 20 X 100 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, SC110090527-M 24 X 140 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, SC110090528-M 24 X 155 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, SC110090531-M 30 X 160 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, CO110080234-M 30 X 175 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, CO110080241-M16 x 80 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, SC110091241-M 20 X 140 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, CO110080243-M 24 X 130 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, CO110080245-M 36 X 180 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, CO110080298-Hex Full threaded bolt and nut with two washers M 27 x 140 mm 8.8 Grade, SC110090534-M 27 X 160 Fully Threaded Bolt and Nut with Two Washer Grade 8.8, ST020260014-Socket Head Cap Screw M30X100, Grade 12.9, SC110210130-Socket Head Cap Screw M24X65, Grade 12.9, SC110210131-Socket Head Cap Screw M16X105, Grade 12.9 Bid Number : GEM/2025/B/6986875 Dated : 02-01-2026 Bid Document 1/17

SUPPLY OF COMPLETE SET OF RADIAL SEALS AXIAL SEALS BY PASS SEALS WITH HOLDING STRIPS and FASTENERS ROTOR POST SEAL FOR UNIT I AIRPREHEATERS MODEL 27 VITM 2000 DOUBLE SEALING ARRANGEMENTS FOR 1 APH COMPLETE SET BOTH END and COLD END AND SUPPLY OF BYP

SET OF FASTENERS (FOR TMB/MRB FILTER FIXING) FOR 3- PHASE LOCOS. SET CONSISTING OF 04 ITEMS AS FOLLOWS:- (1) SS 304 H.H. BOLT M8 x 25MM - 01 NO/SET (2) SS 304 H.H. BOLT M8 x 30MM - 01 NO/SET (3) SS 30

Set of fasteners consists of 1) Galvanized Hex Head Bolt M8 x 70 mm to IS : 1363-2002 Part 1 grade 4.6 - 1 No. 2)Plain washer M8 to IS 2016-1967 Type A - 2 No. 3) Spring lock washer B8 to IS 30

Set of Fasteners for fitting ASR-AR, consisting of: 1) HT HH Screw M10 x 40 to IS: 1364/Part2/2002, Grade 8.8-01 nos 2) SS Nylock Nut M10 to DIN 982, Grade A2-70-01nos 3) SS 304 Plain Washer M10 to D

SET OF FASTENERS (FOR TMB/MRB FILTER FIXING) FOR 3-PHASE LOCOS. SET CONSISTING OF 04 ITEMS AS FOLLOWS:- (1) SS 304 H.H. BOLT M8 x 25MM - 01 NO/SET (2) SS 304 H.H. BOLT M8 x 30MM - 01 NO/SET (3) SS 3

Set of SS fasteners to IS 1364, SS 304 A-270 bolt of make APL/KUN, TVS/DFL only and SS flat washer to IS-2016 and SS spring washers to IS 3063. Set consisting of 04 items as given below : - 1)M12 x 35

SET OF FASTENERS (FOR TMB/MRB FILTER FIXING) FOR 3- PHASE LOCOS. SET CONSISTING OF 04 ITEMS AS FOLLOWS:- (1) SS 304 H.H. BOLT M8 x 25MM - 01 NO/SET (2) SS 304 H.H. BOLT M8 x 30MM - 01 NO/SET (3) SS 30

Set of fasteners for under slung water tank of LHB coaches, One set Consist of 03 items (1) Stainless Steel Hex head screw M12 x 60 as per IS:1364 (Part 2 -2018) TAB. 1, A2- 70 to TAB. 2 of IS:1367 (P

Set of SS fasteners consisting of (1) SS hex head screw- M6X25 mm as per IS 1364-92,PT2, (2) SS Nylock nut M6 IS 7002-1991 and (3) SS Punched washer A 6.6 as per IS 2016-2021, Table-2 (one set item co

Set of fasteners as per Drg. No: CDO/CBE-23/01 where one set consist of 05 items (1) Hex Head Bolt M10 X 65 mm with 25mm grip length as per IS 1364 (Part-(2) Class 8.8 Qty.- 01 No. (2) Nut M10 as per

Set of SS fasteners consisting of (1) SS hex head screw- M6X25 mm as per IS 1364-92,PT-2, (2)SS Nylock nut M6 IS 7002-1991 and (3) SS Punched washer A 6.6 as per IS 2016-2021, Table-2 (one set item co

GALVANIZED MILD STEEL FIRE BUCKET (Fire suppression hand tools) as per IS 2546 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number : GEM/2025/B/6331320 Dated : 11-06-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

600mm FRP Ladder type cable tray with FRP coupler plates, SS 304 Fasteners.

Supply,Installation,Commissioning, of Hardware materials router,Switch,media converter, Lan extender with 3 years maintenance at various locations in Tamil Nadu,pondicherry from the BSNL empaneled System Integrator for BSNL EB Customer

SET OF 03 FASTENERS FOR CBC CARRIER (CBC TABLE) (1) BOLT Hex head 1-1/8 - 7 x 5 to EMD Part No. 9429773. (2) NUT Self lock 1-1/8-7 to EMD Part No. 8032767. (3) WASHER Flat 1-1/4 to EMD Part No. 9533676.

Set of Fasteners of Grade SS304 (A2-70 ) for 3 Phase locos, Set consists of 5 items as given below: 1) SS H.H bolt M8 x 15 mm- 1 No/Set 2) SS H.H bolt M8 x 20 mm- 1 No/Set 3) S S Nut M8 - 2 Nos/set

1009, 1030-2, 1040-2, 1050-2, 5002, 5220-2, 5220-1, 5007-1, Fasteners

LEAK CONTROL KIT, PETROLEUM PRODUCT CLEANUP CHEMICAL, OIL SPILL DISPERSANT, Non Sparking tools, FLAME PROOF SEARCH LIGHT, FOLDING STRETCHER, MECHANICAL TOOL KIT, ELECTRICAL RUBBER HAND GLOVES, ELECTRICAL TESTER, CHEMICAL OIL SPLASH PROOF GOGGLES

GALVANIZED MILD STEEL FIRE BUCKET (Fire suppression hand tools) as per IS 2546 (Q3) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6473485 Dated : 19-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Mechanic machine tool maintenance trainee tool kit (Skill India Program) (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Bid Number ( ) : GEM/2024/B/5767575 Dated : 31-12-2024 Bid Document 1/5 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

SEPARATOR LEVEL CONTROL VALVES - SCV, MINIM ECONOMIZER FLOW CRTL VALVE - MEFCV, HYDRAULIC POWER UNIT - HPU - FOR BSCV, HPU TUBINGS FITTINGS SUPPORTS FOR BSCV, FRESH FILLS OF HYDRAULIC FLUID FOR BSCV, FLUSHING KIT FOR HWL 1 AND HWL 2, FLUSHING KIT FOR ... SPECIAL TOOLS AND TACKLES FOR ...

SEPARATOR LEVEL CONTROL VALVES - SCV, MINIM ECONOMIZER FLOW CRTL VALVE - MEFCV, HYDRAULIC POWER UNIT - HPU - FOR BSCV, HPU TUBINGS FITTINGS SUPPORTS FOR BSCV, FRESH FILLS OF HYDRAULIC FLUID FOR BSCV, FLUSHING KIT FOR HWL 1 AND HWL 2, FLUSHING KIT FOR ... SPECIAL TOOLS AND TACKLES FOR ...

Digital Multimeter True RMS Type, NCVT 6 Non Contact Voltage Detector with Lazer Distance Meter, Infra red Thermometer, Portable Electrical Tool Kit With Certified Insulated tools, Digital Diesel Fuel Transfer Pump Full Kit 12V 24C DC70LPM HIS-FTPDC70LPM

Set of fasteners for brake hanger of WAG [Set of fasteners for brake hanger of WAG- 7 locos consisting of 5 item: i) High tensile hex head bolt M10-1.5x100 grade 8.8 thread length 26mm Qty 01 no/set. ii) High tensile hex head bolt M10-1.5x115 grade 8.8 thread length 36mm Qty 01 no/set. iii) Lock nut hex m-10 bolt face to face length 16mm maximum Qty 02 no/set iv) Spring washer B10 M10 bolt Qty 02 no/set. v) Plain washer for M-10 bolt Qty 02 no/set. Note: Bolt and Nut will be as per IS1364, spring washer will be as per IS3063 and plain washer as per IS 2016. Warranty Period 30 months from the date of Supply. ]

Design, Fabrication and Installation of custom display signage modules using cast polymethyl methacrylate (PMMA) sheets, UV-stabilized, precision laser-cut with polished edges, and solvent-based adhesion on CNC-routed back panels. Included ... edge-embedded fasteners for ...

Supply and installation of State Emblem of India of 18-inch height, precision-fabricated from high- quality cast metal with accurate relief detailing and statutory proportions. Finished in antique gold / brushed brass coating with protective clear ... concealed fasteners , ...

Supply and installation of State Emblem of India of 18-inch height, precision-fabricated from high- quality cast metal with accurate relief detailing and statutory proportions. Finished in antique gold / brushed brass coating with protective clear ... concealed fasteners , ...

Supply and installation of State Emblem of India of 18-inch height, precision-fabricated from high- quality cast metal with accurate relief detailing and statutory proportions. Finished in antique gold / brushed brass coating with protective clear ... concealed fasteners , ...

personal safety kit reflective luminous garments Personal Safety Kit Reflective Luminous Garments ( 550 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to EN Standard EN:471-2003 + A1:2007 - This ... slide fasteners High ... slide fasteners , ... loop fasteners Type ... - FASTENERS for ...

Tool Box- Steel, Open end spanner, Rings spanner, Cutting Player, Nose Player, Long Screw Driver, Compination Screw Driver, Water Pump Player, Adjustable Spanner, Allen Key, Lock Player, Ball Head Hammer, Chisel Long, Centre Puntch BOQ Title BOQ Bid ... mechanical tool kit

LV7 STLN VF X 5601500 NBF INJECTOR FOR 135 KW BS III VP 37, LV7 STLN VF P 1020551 MINOR REPAIR KIT, LV7 MARUTI 09265M41001 BEARING FRT WHEEL, LV7 STLN 8105 001038 X 4700600 BAG TOOLS AND SPARE PARTS TOOL KIT BAG, LV7 STLN B0N00720 WIPER BLADES, LV7 STLN VF P 3602751 BRAKE LINING KIT STD

"REMOVAL OF ALL PACKING WOOD, PLYWOOD, CABLE DRUMS AND OTHER WOOD BASED PACKING MATERIALS UNUSABLE TO ICF WITHOUT SEGREGATION, PACKING WOOD ATTACHED WITH NAILS. FASTENERS, ANGLES, AND CHANNELS IS PERMITTED. THE BLACKENED WOOD IF ANY ALSO TO BE REMOVED. THE WOOD TO BE CLEARED, BY CRUSHING THE WOOD USING JCB. THE BLACKENED WOOD IF ANY ALSO TO BE REMOVED. Ranking will be HIGHEST TO LOWEST .

REMOVAL OF ALL PACKING WOOD, PLYWOOD, CABLE DRUMS AND OTHER WOOD BASED PACKING MATERIALS UNUSABLE TO ICF WITHOUT SEGREGATION, PACKING WOOD ATTACHED WITH NAILS. FASTENERS, ANGLES, AND CHANNELS IS PERMITTED. THE BLACKENED WOOD IF ANY ALSO TO BE REMOVED. THE WOOD TO BE CLEARED, BY CRUSHING THE WOOD USING JCB. THE BLACKENED WOOD IF ANY ALSO TO BE REMOVED. Ranking order of the Bid will be Higher to Lower.

REMOVAL OF ALL PACKING WOOD, PLYWOOD, CABLE DRUMS AND OTHER WOOD BASED PACKING MATERIALS UNUSABLE TO ICF WITHOUT SEGREGATION, PACKING WOOD ATTACHED WITH NAILS. FASTENERS, ANGLES, AND CHANNELS IS PERMITTED. THE BLACKENED WOOD IF ANY ALSO TO BE REMOVED. THE WOOD TO BE CLEARED, BY CRUSHING THE WOOD USING JCB. THE BLACKENED WOOD IF ANY ALSO TO BE REMOVED.Ranking order of the Bid will be Higher to Lower.

Set of Fasteners for Wheel Set Earthing Housing Modification as per Drg. No. SKED- 945. One set consist of Fasteners as Follows:-1) Stainless Steel Bush, L=18mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI 304) to match with M8 Allen screw) Qty. 03 nos./Set2) Stainless Steel Bush, L=15mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI 304) to match with M8 Allen screw) Qty. 02 nos./Set3) Stainless Steel Bush, L=10mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI 304) to match with M8 Allen screw) Qty. 01 no./Set4) Stainless Steel Stud M8x55mm (Mat. AISI 304) with both end threaded Length of 25 mm & 20 mm. Qty. 02 Nos./Set5) Stainless Steel Stud M8x50mm (Mat. AISI 304) with both end threaded Length of 25 mm & 15 mm. Qty. 01 No./Set6) Stainless Steel Lock nut, M8 Qty. 03 Nos./Set.One set consist of 06 items & Qty. 12 nos

Supply of Set of tools for Vande Bharat consist of 13 items 1. Cordless drill machine-02 Nos., 2. Cordless Power Wrench- 02 Nos., 3. Anemometer-02 Nos., 4. Adjustable spanner 30 mm- 02 Nos., 5. Open spanner size 10 to 32 mm - 02 Nos., 6. Ring spanner ... 12. Tool Kit (19 ...

964720200000-HSFG BOLT-M30x165-IS 3757-GR 8.8 (Q3), 964720210000-HSFG BOLT-M36x230-IS 3757-GR 8.8 (Q3), 964720220000-MOUNTING FASTENERS SET-1 3 BY 4-8UN- KVA1 (Q3)