Loading
Loading…
Loading…
921 results • Best match
Set of fasteners consisting of following item (1) Set of Stainless Steel Hex head bolt full thread M8x40, Grade: A2-70-01No., with Flat washer, Grade: A2-02 Nos., Spring washer, Grade: A2-01 No., & H
: PCB for UNIT board assembly for FM Daido Block Instrument to Drg no.:CWM/SK 01019 with Insulation sheet, necessary bushes and fasteners in set. One set consist of 1)PCB board with all components 2)
HEX HEAD SCREW SIZE : M24 x 70MM AS PER CLW DRG. NO. 06/4/15/76. MAKE :LPS/HARYANA, LPS BOSSARD (P) LTD, SUNDARAM FASTENES LTD. (TVS). VARDHMAN INDUSTRIAL FASTENERS. BOLT MASTER INDIA PVT LTD, DEEPAK
AUXILIARY COMPRESSOR (MCPA) TO CLW SPECIFICATION NO. CLW/ES/C-4 ALT.- F WITH ANNEXURE-B, & RDSO STR NO. RDSO/2007/EL/STR/0015, REV.- 1. NOTE: ALL TYPE OF FASTENERS (HIGH TENSILE) EXCEPT SPRING WASH
SET OF FASTENERS FOR OCB FILTER, TMB FILTER, HOG FILTER, WIND SHIELD GUARD AND DRIVER SEAT ASSEMBLY 1. STAINLESS STEEL SS304 HEX HEAD BOLT OF SIZE M8 X 25 FULLY THREADED WITH BUTTERFLY TYPE SS304 WAS
.SUPPLY OF FASTNERS FOR COUPLER OF VANDE BHARAT SLEEPER BEML RAKE SPARES OF DELLNER MAKE FASTENERS KIT OF 7 SETS (PART No-1145193) FOR VB SLEEPER BEML SPC.CENTRE MUFF INCLUSIVE OF: a) Hex head screw(P
Set of fasteners consist of Stainless Steel Hex head bolt full thread M6x20, Grade: A2-70-01No. with Flat washer, Grade: A2-02Nos. Spring washer, Grade: A2-01No. conforming to IS:1367 PART-14 (1984) F
61615130, 61632207, 62602204, 62602206, 62612103, 62612104, 62613103, 63602101, 63602115, 63602116, 64634207, 65117042, 68176602, 86212000, 86242000, 86632010, 86871604
L15321FP86602001 SS STUD ASSY M16X120 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M16X120 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602002 SS STUD ASSY M16X130 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M16X130 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602003 SS STUD ASSY M20X120 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M20X120 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602004 SS STUD ASSY M24X150 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M24X150 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602005 SS STUD ASSY M16X120 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M16X120 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602006 SS STUD ASSY M16X130 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M16X130 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602007 SS STUD ASSY M20X120 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M20X120 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS, L15321FP86602008 SS STUD ASSY M24X150 ASTM A193 GRB8 SS304 FULLY THREADED STUD OF SIZE M24X150 WITH 2 NOS ASTM A194 GR8 SS304 HEAVY HEX. NUTS AND A PAIR OF SS304 PLAIN PUNCHED WASHERS Bid Number ( ) : GEM/2025/B/6302261 Dated : 03-06-2025 Bid Document 1/21
HEX SCREW M36X70 for HP CASING SUPPORT, ST020270301 - SCREW SET HEX. BM36X10X200 for Turbine Toolkit, Drawing No. 81208745000-1-2 and Part No. 11, ST020200498 - BOLT PRESS OUT BM36X200 for Governing System, Drawing No. 81202725500-0-13 and Part No. 31, ST020280075 - CAP NUT M16X55 for HP FRONT BEARING PEDESTAL, Drawing No. 1160127000 and Part No. 24, ST020280076 - NUT D M16 for HP FRONT BEARING PEDESTAL, Drawing No. 1160127000 and Part No. 25, ST020200319-WASHER 6.6X10.5X7 For ATT CHANGE OVER VALVE, Drawing and part No. 1143505000-52, ST020270722-STUD M30 FOR MS AND HRH STRAINER HOUSING, DRAWING AND PART NO. 11315092000-7, ST020270723-NUT HEX PM30 FOR MS AND HRH STRAINER HOUSING, DRAWING AND PART NO. 11315092000-9, ST020270706 - Hexagon Nut M3 Grade 8, ISO 4032 For LPBP Stop Valve, ST020270707 - Hexagon Nut NFM16 Grade 8, DIN 2510 For LPBP Spray Control Valve, ST020270717 - STUD M52X240 Drawing no- 1122205000-1-5, Part No-12, ST020270716 - STUD M30X150 Drawing no- 1122205000-1- 5, Part No-13, ST020270712 - STUD M36X165 Drawing no- 11132236000-1-3, Part No-2, ST020270718-STUD M16F0X70 Drawing no- 11132236000-1-3, Part No-3, ST020270719-CAP NUT AM36 Drawing no- 11132236000-1- 3, Part No-4, ST020270059 - NUT HEX. AM16 Drawing no- 11132236000-1-3, Part No-5, ST020270708 - SCRU CAP SOC A12.9 M8X40 Drawing no- 1140205100-0-14, Part No- 51, ST020270711 - SCRU HEXP -8.8 M5X10 Drawing no- 1140205100-0-14, Part No-52, ST020270713 - SCRU HEX A- 8.8 M10X30 Drawing no- 1140205100-0-14, Part No-53, ST020270621 - SCRU HEX A- 8.8 M12X30 Drawing no- 1140205100-0-14, Part No-54, ST020270710 - SCRU CAP SOC TH HD A-8.8 M5X10 Drawing no- 1140205100-0-14, Part No-55, ST020270616 - SCRU CAP SOC A12.9 M5X10 Drawing no- 1140205100-0-14, Part No-56, ST020270068 - SCRU CAP SOC TH HD A-8.8 M5X16 Drawing no- 1140205100-0-14, Part No-57, ST020270715 - SCRU CAP SOC A12.9 M6X16 Drawing no- 1140205100-0-14, Part No- 58, ST020270652 - SCRU CAP SOC A12.9 M8X16 Drawing no- 1140205100-0-14, Part No-59, ST020270709 - SCRU CAP SOC A12.9 M8X40 Drawing no- 1140205100-0-14, Part No-60, ST020270410 - SCRU CAP SOC A12.9 M12X25 Drawing no- 1140205100-0-14, Part No-61, ST020270714 - SCRU CAP SOC P-12.9 M10X100 Drawing no- 1140205100- 0-14, Part No-62 Bid Details 2/43
Supply of 16W LED PIT light fitting (10W [Supply of 16W LED PIT light fitting (10W+4W+2W ) complete, Aluminum die cast with dust and Water proof IP67 protection necessary hardware material suitable to work on 24V DC 3 Dimensional type for Pit lighting as per the dimensions enclosed in drawing & detailed Specification attached including all accessories with 5 years warranty.]
Set of Fasteners, Set consists of 05 items as given in annexure enclosed. Firm's Offer Make: Make Brand:As per Tender (Sl No.5 of Annexure to be supplied from the Make TVS/VIF/LPS/DFL/UNBRAKO /BOLTM
Set of high tensile Galvanised Fasteners for EP Contactors with Grade 8.8 Consisting. 1) M5 x 15 mm Hex. Head Bolt to IS: 1364/92, With Suitable Spring Washer to IS:3063/82 , With Suitable Flat Washer
Set of fasteners for Pantograph consisting of 3 items as per Annexure Note: 1) Sample for each item to be supplied before effecting bulk supply. 2) Item to be supplied within 30 days from the date of
Set of fasteners of WAP-7 loco for OCB motor fixing. Set consists of 07 Items. Material specification:-Material is of spring steel CK75 standard and A2-70 grade and as per specification DIN: 931/933 o
Set of high tensile Galvanised Fasteners for EP Contactors with Grade 8.8 Consisting. 1) M5 x 15 mm Hex. Head Bolt to IS: 1364/92, With Suitable Spring Washer to IS:3063/82 , With Suitable Flat Washe
Portable Fire Extinguishers (V2) as per IS 15683:2018 (Q2), GALVANIZED MILD STEEL FIRE BUCKET (Fire suppression hand tools) as per IS 2546 (Q3)
Cable Tray - Coupler Plates, Cable Tray - M8 Fasteners
Fasteners for SKY man- Sky climber 25 items
Set of Fasteners for Cover of Earthing Device, where one set consists of two items: 1) Hexagon Socket Head Cap Screw M8 x20, Electro Galvanised, as per IS: 2269-95 Table-1 -01 Nos 2) Spring Washer M8,
Set of Galvanised fasteners consisting of following four items. 1) Hex head Screw M10 X 35 mm fully threaded, property class 8.8 as per IS: 1364/2002 Part-2 - 1 No /set. 2) Spring lock washer B10 as
SET OF FASTENERS FOR GOLDEN CHARIAT BOGIES CONSISTING OF 11 ITEMS. 1. HEX. SOCKET HEAD CAP SCREW M16 X 45, IS: 2269-1995 8.8 coating to MDTS 057, TO RCF DRG.NO. CA05100, ALT.C, ITEM -11, Qty=16Nos. 2
Set of Fasteners for Cover of Earthing Device, one set consists of two items: 1) Hexagonal Socket Head Cap Screw M8 x20, Electro Galvanised, as per IS: 2269-95 Table-1 -01 No/Set 2) Spring Washer M8,
Set of FASTENERS FOR TRANSVERSE MIDDLE BERTH CHAIN ASSEMBLYCONSISTING OF (1) S.S. HEXAGONAL SOCKET HD. CAP SCREW- M10 X 55 (A2-70TO IS:1367.PT. 14-84) AS PER IS : 2269-2006/ ISO:4762 (2) S.S. NYLOC NU
Set of SS304 fasteners of grade: A2 - 70 & IS: 1367, Part: 14 - 1984 of stainless steel consisting of 1)Hex Head full threaded bolt of size M12x35mm - 01 Nos/set.2)Hex Head full threaded bolt of size
"A SET OF FASTENERS FOR INSTALLATION LEVER AS PER RDSO SPECIFICATION NO. C-K407 (REV.-04) ISSUED : MARCH 2023, WHERE ONE SET CONSIST OF 05 ITEMS (1) HEX HEAD SCREW M10X60MM AS PER IS 1364 (PART-(2) CL
Set of fasteners to IS 1364/2002 consisting of i. Hexagonal Bolt, half threaded, grade 8.8, size 40 mm length &6 mm dia.- 01 No. ii. Plate Washer with Outer dia.- 22.6 mm , Inner dia.-6.40 mm & thic
Tool Kit for Football and Volleyball (V2) from Meerut (UP) (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Experience Criteria, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Bid Number ( ) : GEM/2025/B/5789811 Dated : 07-01-2025 Bid Document 1/5 Estimated Bid Value 50000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "
Set of SS fasteners to IS 1364, SS 304 A-270 bolt of make APL/KUN, TVS/DFL/VIF only and SS flat washer to IS-2016 and SS spring washers to IS 3063. Set consisting of 04 items
COLD FORGED ROLLED THREAD BOLTS SIZE M12 X 110-10.9 GRADE AS PER IS 1364 PART-1/2002 FOR DEMU TA TYPE 7003 BX /7003 CW/7003 DV OF BHEL MAKE ALTERNATOR. MAKE: TVS / GKW / LPS / DEEPAK FASTENERS LIMITED
Sets of stainless fasteners consisting of hexagonal head fully threaded bolt 01 no. with 02 nos of flat washers, 01 no of spring washer and 01 no of nut for each of the below mentioned sizes as per IS
Set of fasteners (All bolts Chromium coated) consisting of 4 items as given below: 1) M5 X 25 HH bolt slotted half threaded with suitable nut, 1 spring washer, 1 flat washer- 1000 Set 2) M6 X 40 H
Set of Galvanised fasteners consisiting of 1.Hexagonal M6 nut to IS 1364, Grade 8 - 10000 nos./set 2.Hexagonal M8 nut to IS 1364, Grade 8 - 2000 nos./set 3.Hexagonal M10 nut to IS 1364, Grade 8
Set of fasteners (All are Cadmium coated) with hexagonal head bolt to IS: 1364, GRADE 8.8, NUT to IS:1367 GRADE 8, Set consists of 3 items as given below: 1) M6 X20 mm (fully threaded) - 4500 Nos/set
HIGHER CAPACITY AIR SPRINGS (180 KN) CONFORMING TO RDSO STR RDSO/2020/CG-01. FOUR SUCH SETS FROM ONE COACH SET. THE FASTENER SHALL BE OF TVS OR UNBRAKO OR LPS MAKE ONLY. SPARE O-RINGS AND FASTENERS SH
Set of Galvanized fasteners consisting of the 5 items 1. HTHH bolt of size M10*30, 1.5mm pitch fully threaded, 8.8 grade to IS-1364/2002- 1no/set 2. HTHH bolt of size M10*35, 1.5mm pitch fully threa
Set of Lead coated fasetners of Lead acid and TL Batteries conforming to figure 2B of IS : 6848/79 with amendment 1 to 3 or latest if any. One set of fasteners shall consists of the following (1). One
Set of fasteners for TRC 1000 MN Compressor consisting of:1) Hexagonal Bolt M12 x 75 to ELGI Part No. 000906192 Qty-100 Nos.2) Spring washer M12 to ELGI Part No. 000996112 Qty-250 Nos.3) Hexagonal Nut
Electrician tool kit (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6316353 Dated : 06-06-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 151580 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Hex Head Screw- M16X200x44 THD (Rolled thread) (zinc plated), IS 1364, Property class 10.9, IS 1367 part-III, IS 1367 part-II Grade A, IS 1367 part-17. CLW Specn. No. CLW/MS/3/201 Alt 2 or latest and CLW Specn. No. CLW/MS/3/49 Alt 4 or latest clause ... (PRECISION FASTENERS ) ... SUNDARAM FASTENERS (TVS) ...
Fasteners for 210 MW LMW Design Turbine - 16 items
SUPPLY OF COMPLETE SET OF RADIAL SEALS AXIAL SEALS BY PASS SEALS WITH HOLDING STRIPS and FASTENERS ROTOR POST SEAL FOR UNIT III AIRPREHEATERS MODEL 27 VITM 2000 DOUBLE SEALING ARRANGEMENTS FOR 1 APH COMPLETE HOT END and COLD END
Set of Fasteners for MEMU consisting of: 1) MS Hex. Head screw, size: M8X70 as per ISO:4017 - 01No. 2) MS Hex nut prevailing Torque type, size: M8 as per IS: 1364 (Part 2) - 1 No. 3) Plain washer, siz
SET OF FASTENERS CONSISTS OF 04 ITEMS: EACH SET CONSISTS OF (i) HEX HEAD SCREW M5 X 16MM WITH NUT, SPRING WASHER AND 2 NOS. FLAT WASHER -3 SET, (ii) HEX HEAD SCREW M10 X 40MM WITH NUT, SPRING WASHER A
High Tensile Stainless steel rustless U bolts,dia 10 mm with Nuts of RI No. 1162-S for single catenary suspension clamp as per RDSO Specification No.TI/SPEC/OHE/Fasteners/0120 /Rev-1, Drawing No.ETI/OHE/P/150 or latest.
SET OF FASTENERS FOR IRCTC EOG COACH BOGIES, CONSISTING OF 8 ITEMS, 1. CHEESE HEAD SCREW M10 X 40, IS: 1366-4.8, TO ICF DRG.NO. WICTAC1-0-5-001, ITEM -12. QTY=08NOS. 2. HEXAGONAL NUT M10-5, IS: 1363
Set of Fasteners, consisting 03 items, 1) Stainless steel Stud M10 x 40mm to IS: 1862-1975, material A2-70 to IS: 1367 (part-14), QTY = 01 No/Per set, 2) Stainless steel Nut M10 to IS: 1364 (Part-3) 2
Set of High Tensile Fasteners for EMC with Grade 8.8 Consisting. 1) M5 x 25 mm Hex. Head Bolt to IS: 1364/92, With Suitable Spring Washer to IS:3063/82 , With Suitable Flat Washer to IS: 5369/75,Qty-
SET OF HEX SOCKET HEAD CAP SCREW M8 X 20- 3 NOS PER SET AND M8 X 25- 2 NOS PER SET FOR EMU TAP CHANGER.(Make: LAXMI PRECISION SCREWS LTD/ BOLT MASTER INDIA (I) PVT LTD /SUNDARAM FASTENERS LTD/VARDHAMA
SET OF FASTENERS FOR MUFFLER of 1400 HP DEMU DPC containing (a) Hex Head Bolt M20 x 65 Grade 10.9, (b) 01 no Nut, (c) 01 no Spring Washer, (d) 01 no Plain Washer conforming to IS 1363:2002 or latest.