Hardware & Tools Tenders in West Bengal

SS U Bolts dia 10 mm with Nuts & lock nut for Bracket insulator as per Specification-TI/SPEC/OHE /FASTENERS/0120/REV/1, Drg. No-ETI/C/0073. Make-RDSO Approved vender.

G.S Bolt and Lock nut Size: 16x50x38mm conforming to spec no-TI/SPC/OHE/Fasteners/0120 Rev-1 as per drawing- ETI/C/0073 Mod-A. FIRM'S OFFER ACCEPTED MAKE/BRAND:RBE MAKE.

SUSPENSION CLEVIS ( 18MM ) COMPLETE WITH FASTENERS AS PER RDSOS SPEC. NO - TI/SPC/OHE/FITTINGS/0130 ( 10/13 ) AND RDSOS DRG. NO. - RE/33/P/1270-1, REV-F . MAKE BRAND: ERF

Contact Wire Parallel Groove Clamp (RI No. 1031-3), Complete with fasteners as per RDSO Drg No.-ETI/OHE/P/1030-3, Rev-A or Latest. Spec No. TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1 or latest.Firm's

Bolt S/S with nut and lock nut 12x45/30 mm as per RDSO specn. No. TI/SPC/OHE/Fasteners /0120 [March 2013] and RDSO Drg. No. ETI/C/0073 Mod-A

GI Bolts & Nuts with Lock Nuts & Spring Washer as per Spec-TI/SPC/OHE/Fasteners/0120 (2013) and RDSO Drg. No. ETI/C/0073, Mod-A, Size 16x220x57, Make-CORE approved firm.

GI Bolt and nut with washer of size M20 x 700X65 as per Specification : TI/SPEC/OHE/FASTENERS/0120/REV/1, Drg.No-ETI/C/0073 Firms offer: same as above: make: RBE

GI Bolt wit Nut, Check Nut, 2 nos Plain Washer and 1 nos Spring Washer size 16x75/38 mm as per RDSO specification TI/SPC/OHE/Fasteners/0120 Accepted Make/Brand: RBE

GI Bolt wit Nut, Check Nut, 2 nos Plain Washer and 1 nos Spring Washer size 16x30/25mm as per RDSO specification TI/SPC/OHE/Fasteners/0120. Accepted offer: Make/brand - RBE.

CATENARY WIRE ENDING CLAMP (65 SQ MM) PART NO 1121, 1092 AND 1094 WITH FASTENERS RDSO DRAWING NO. ETI/OHE/P/1120 REV-B OR LATEST. MAKE:SEW OR SIMILAR MAKE/BRAND: SBI

Full thread Stainless steel Nut and Bolt with 02 flat washer and 01 spring washer 12X75mm as per RDSO Specification No. TI/SPC/OHE/Fasteners/0120 Rev-I (March-2017) or Latest.

Wheel Disk Brake set R780G with fasteners as per Drg. No. JMP/CR-305/24.14,Alt-2 .MDC-ID: 82786440, 55687140 St. Code- 1.1.2.10.2, 1.1.2.11.2 Accepted make: L&T CONSTRUCTION EQUIPMENT LTD.

GI Bolts & Nuts with Lock Nuts & Spring Washer as per Spec-TI/SPC/OHE/Fasteners/0120 (2013) and RDSO Drg. No. ETI/C/0073, Mod-A, Size- 16x50x38, Make-CORE approved firm.

Contact wire Parallel Clamp with fasteners RI No. 1041-2 as per RDSO specification No. TI/SPC/OHE/Fittings/0130 [10/13] and Drawing No. ETI/OHE/P/1040-2, Rev.-E.

Supply of 220 KV system bimetallic terminal connector to suit Zebra (28.62 dia ) ACSR conductor and alluminium /copper pad of Isolator /CT/BT having RI No - 11031 & 11032 including all the fasteners

BIMETALLIC PARALLEL CLAMP [10/20]RI-1541.COMPLETE ASSEMBLY WITH FASTENERS AS PER RDSO DRG NO. ETI/OHE/P/1540 REV.D Or "Latest". ACCEPTED MAKE/BRAND : M/S. TRANSMISSION LINE PRODUCTS/KOLKATA.

Contact wire splice (toothed type) as per RDSO specification No TI/SPC/OHE/ Fittings/0130 (10/13) -REV 1 and drg No. ETI/OHE/ P/1080-1 Mod-B complete with fasteners.

U bolts (Stainless steel) dia 10 mm with Nuts only of RI No. 1173 (S), as RDSO Specification No. TI/SPEC/OHE/Fasteners/0120 /Rev-1, Drawing No. ETI/OHE/P/150

Door Handle for Lavatory Door of LHB coach as per RCF Drg. No. LW 56429, Alt.a.(WITH FASTENERS), MATERIAL AND SPECIFICATIONS. AS PER DRAWINGS. (PART DRAWINGS MAY BE REFERRED - LW56455, LW56456 & LW564

Contact wire parallel clamp (small) complete set with fasteners as per RDSO Drg. No. ETI/OHE/P/1040-2 (Mod-E), Part No. 1041-2 (Mod B) or latest. Make/Brand : SBI

Set of Fasteners of Supporting Device of CBC of WAP7 Loco, consisting of i)Allen Head Bolt M16 to Drg.No. FASL/SLD/0856, ii) Nut M16 to Drg. No. FASL/SLD/0856

Sweeping, Cleaning, spreading of bleaching powder and maintenance of the existing underground sewers and disposal daily garbage from the existing vats and removing the same as per KMC rules twice a day including necessary tools and tackles for a per

Sweeping, Cleaning, spreading of bleaching powder and maintenance of the existing underground sewers and disposal daily garbage from the existing vats and removing the same as per KMC rules twice a day including necessary tools and tackles for a per

Supply, Testing, Installation and Commissioning and Demonstration of Hand Tools, Instruments, Equipment and Machinery etc. for the Trade of Fitter.

Supply, Testing, Installation and Commissioning and Demonstration of Hand Tools, Instruments, Equipment and Machinery etc. for the Trade of Welder.

Supply, Testing, Installation and Commissioning and Demonstration of Hand Tools, Instruments, Equipment and Machinery etc. for the Trade of Electrician.

RENOVATION OF BITUMINAS ROAD AT BAZAR FROM THE NH-31 TO THE CHOWDHURY HARDWARE STORE UNDER WARD NO. 07 WITHIN ISLAMPUR MUNICIPALITY.

TOOL KIT NCVD F 4734311 DE SPANNER 12 X 13 METRIC, TOOL KIT X 4700811 RING SPANNER, LV7 MARUTI 37200M83200 23H SWITCH ASSY CHANGE OVER, LV6 MT1 2060 5830 0104 8 TON HYDRAULIC JACK WITH HANDLE AND SPA, LV7 STLN B 5408731 FRONT GRILL

Waste Containers and Accessories - Domestic (V2) (Q3), Safety Equipment Tool Kit for Labours (Q3), Outdoor Twin Waste Bin (Q3)

Drone and FFV Training Simulator Software, Simulator Tool Kit, Processing unit of Drone, AR VR Googles, Hardware for Drone

Waste Containers and Accessories - Domestic (V2) (Q3), Outdoor Twin Waste Bin (Q3), Safety Equipment Tool Kit for Labours (Q3)

Annealed Copper split pin 4x36mm as per RDSO Specification no. TI/SPC/OHE/Fasteners/0120 Rev-1 and drawing no ETI/C/0075 or latest FIRM OFFER MAKE /BRAND-OWN MAKE IS ACCEPTED

Contact wire splice toothed type with fasteners as per RDSO Drg-assembly- No ETI-OHE-P-1080 -1- mod - B and part Drg no ETI-OHE-P-1081 - 1 mod-C or latest.

Contact wire Parallel Clamp [small] with fasteners RI No-1040-2 as per RDSO specification No. TI/SPC/OHE/Fittings/0130 [10/13] and Drawing No. ETI/OHE/P/1040-2, Rev.-E.

Lead acid Battery 210Ah capacity for train lighting complete with intercell ,endcell connector and fasteners, conf. to IS: 6848/1979 with amndt no. 1,2 & 3 and annexure -H with correction slip of RDSO

KIT OF FASTENERS & SPRING WASHER FOR AIR BRAKE EQUIPMENTS CONSISTING OF 15 ITEMS TREATED AS ONE SET. (DETAILS AS PER ANNEXURE ATTACHED). SPECIFICATION FOR STUD IS: 1862; 1975, TYPE: 'A' (FOR ALL FOUR

Raised Register Arm clamp (as per RDSO drawing no. ETI/OHE/P/1370-1 ( REV-H)(RI no. 1371-3) complete with fasteners as per RDSO specification no. TI/SPC/OHE/Fittings/0130(

20 mm strain clamp assembly with fasteners as per RDSO drawing no. ETI/OHE/P/1600 mod. C or latest. (Material to be procured through CORE approved sources only) ACCEPTED MAKE/BRAND - DSF

HALL EFFECT ACTIVE SPEED SENSOR Assly (WITHOUT WHEEL, PLATE, CONNECTOR & FASTENERS) SUITABLE FOR IGBT 3-PHASE LOCO AS PER CLW Specn No. CLW/ES/3/0528 Alt. 'A'. Accepted Description : HALL EFFECT ACTIV

HIGH TENSILE HEXAGONAL SOCKET-HEAD CAP SCREW M20x55 long (for fitment of Air Spring Assy. in LHB Coaches), confirming to specification no. IS: 2269 (latest), Class 10.9. All fasteners shall be Zinc el

LARGE CATENARY SUSPENSION BRACKET (2131 & 2132) COMPLETE WITH FASTENERS AS PER RDSO'S SPECN. NO.- TI/SPC/OHE/FITTINGS/0130 (10/13 ) REV. 1 AND RDSO's DRG. NO. ETI/OHE/P/2130, REV - 'B'.

Parallel clamp (157-65/107/150) with all fittings and fasteners as per RDSO Drawing No. ETI/OHE/P/1030-3 Rev-A. RI No. 1031-3. -Accepted Firms offer Make/Brand-AEPL.

Contact Wire Parallel Groove Clamp (RI No. 1031-3), Complete with fasteners as per RDSO Drg No.-ETI/OHE/P/1030-3, Rev-A or Latest. Spec No. TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1. Firms Offer : S

Guy rod ( 25 mm dia ), length - 5.35 mtrs. Long for dwarf mast ( ID No. 5006 - 1 ) complete with fasteners, as per Spec: TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1, ETI-OHE-13 (4-84) may 2018, Drg: E

Contact wire splice toothed type complete with fasteners , RI No. 1081-1 as per RDSO Specn. No. IS: 3091-1999, Spec: TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1, Drg: ETI OHE P 1080-1 REV B, STR: CORE

COPPER SPLIT PIN DIA 4MM AS PER IS 549-1974 & IS 191-2007 (PART VII)FRTP-2) & RDSO SPECIFICATION NO TI/SPC/OHE/FASTENERS/0120 Firms Offer : Same as above. Make / Brand ; AEPL

LARGE SPAN WIRE (130 SQ MM) ENDING CLAMP COMPLETE ASSEMBLY (PARTNO.1131,1102,1143,261 with all fasteners) AS PER RDSO DRGNO.ETI/OHE/P/1140/Rev-B. Make-CORE approved source only. Note:- Material to be

Feeder Wire Ending Clamp (150 sq mm) Complete with Fasteners Identification Part No - 1131,1102,1104 RI 1130 as per RDSO spec. no- TI/SPC/OHE/FITTINGS/0130 (10/13), Drw: ETI OHE P 1130

Bolt Galvanized Steel with Nuts & L/Nuts 16x50x38 mm RI No. 201, as per RDSO Specification no. TI/SPEC/OHE/Fasteners/0120 Rev-1, Drawing No. ETI/C/0073, STR: CORE-STR-15.

TEMPER CHECK MARKER PASTE WITH SPECIAL FORMULATION FOR IDENTIFICATION OF VIBRATORY LOOSENING OR TEMPERING IN NUTS,BOLTS,FASTENERS ETC. DRY TO TOUCH - 30-40MIN.,80% CURING- 48-72HRS.,FULL CURING- 7-8 D