Hardware & Tools Tenders in West Bengal

36mm Aluminum bus tee connector as per RDSO'S Drg. No-ETI/PSI/P/6500, Rev.-C, RI-6501 & 6482 with fasteners as per RDSO spec. TI/SPC/OHE/Fitting/0130(10/13) or latest.

Contact Wire parallel clamp (Small) RI No. 1041-2 complete with fasteners Stainless Steel Bolt 16x50x38 mm with nut and Phosphorus Bronze Spring washer as per Ref. Drawing ETI/OHE/P/1040 - 2 (Rev -

SUPPLY OF PG (PARALLEL GROOVE) CLAMP (RI NO 1031-2) RDSO SPECIFICATION. ETI/OHE/P/1030-2 Rev-D OR LATEST WITH ALL FASTENERS & FITTINGS ETI/OHE/P/1030-2 REV-D. ACCEPTED MAKE-

Supply of Rigid through connector to suit 50 dia aluminum tubular bus bar and SPIDER AAC conductor for 25 kV PT type II. of RI No.s (11111, 11112 & 11113) including fasteners confirming to specificati

CRASH WORTHY FAN GUARD ASSEMBLY [TOP AND BOTTOM] COMPLETE WITH BEADING PROVIDING SECURING CLAMPS AND 2 CLIPS WITH SECURING FASTENERS MADE OF POLISHED STAINLESS STEEL GR. 304 AS PER ICF DRG No. ICF/SK3

High Visibility Warning garment in florescent orange with synthetic slide fasteners spec. No. EN-ISO-20471-2013 or EN-471:2003 Al 2007 as standard IS:15809:2008 fabric contents shall be polyster cott

LARGE SPAN WIRE (130 SQ MM) ENDING CLAMP COMPLETE ASSEMBLY (PART NO.1131,1102,1143,261 with all fasteners) AS PER RDSO DRG NO.ETI/OHE/P/1140/Rev-B. Make-CORE approved source only. Note:- Material to

CRASH WORTHY FAN GUARD ASSEMBLY [TOP AND BOTTOM] COMPLETE WITH BEADING PROVIDING SECURING CLAMPS AND 2 CLIPS WITH SECURING FASTENERS MADE OF POLISHED STAINLESS STEEL GR. 304 AS PER ICF DRG No. ICF/SK

Contact Wire parallel clamp (Small) RI No. 1041-2 complete with fasteners Stainless Steel Bolt 16x50x38 mm with nut and Phosphorus Bronze Spring washer as per Ref. Drawing ETI/OHE/P/1040 - 2 (Rev -

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Bathroom Water Shower (V2) (Q3), Float Valve PVC 25mm, Float Valve PVC 20mm, CP Jet Pressure for EWC, PVC Tank Lid cover with necessary nuts and bolts, Bottle Trap 32mm CP

2097049737, 2097075369, 2097075364, 2097010787, 2097076164, 2097730428, 2097732493

S.S Allen key Screw 10x1.5x25, Bolt HT Hex M12X70, Bolt HT Hex M16X70, Bolt HT Hex M12X80, Bolt HT Hex M16X90, Bolt HT Hex M20X90, Bolt HT Hex M10X65, Bolt HT Hex M20X65, Bolt HT Hex M10X35, Bolt HT Hex M10X40, Copper Washer 10MM, Copper Washer 12MM, Copper Washer 16M, HEX BOLT M24X65, HEX BOLT M12X65, HEX BOLT M16X60, HEX BOLT M16X40, M S STUD BOLT 16X90MM, M S STUD BOLT 24X125MM, M S Full Thread Bolt 12x150, M S Bolt 06x35, NUT M10, NUT M24, NUT M30, NUT HEX M36, NUT HEX M12 AUTO BLACK, NUT HEX M16 AUTO BLACK, NUT HEX M8, NUT HEX AUTO BLACK M10, NUT M20, SPRING Washer M06, SPRING Washer M08, SPRING Washer M10, SPRING Washer M12, SPRING Washer M16, SPRING Washer M20, PLAIN Washer M06, PLAIN Washer M08, PLAIN Washer M10, PLAIN Washer M12, PLAIN Washer M16, PLAIN Washer M20, HT Hex M16X40, BOLT Hex M12x40, BOLT Hex M12x50, SS STUD M30, Base Plate Shaft Seals., SS STUD M16, Shaft Seals, SS COLLARD BOLT M20X45 Runner, SS STUD M16 AS PER DRAWING

BOLT:IS:1364, PC10.9, BLK:MC:12X120MM, HT- BOLT:IS:1364, BLK:MC:M18X110, HT- NUT:IS1364, PC8.8-BLK:MC:M 27MM, HT-NUT:IS1364, PC8.8- BLK:MC:M 36MM, PC8.8-CLDFORG:MC:M 22MM, SCREW HEX:IS2269 PC-12.9:MC:12X60MM, SCREW HEX:IS2269 PC-12.9:MC:12X75MM, SCREW HEX:IS2269 PC- 12.9:MC:12X90MM, SCREW HEX:IS2269 PC- 12.9:MC:20X75MM, BOLT:PC8.8-BLK:MC:M10X40, BOLT:PC8.8-BLK:MC:M24X60, BOLT:PC8.8- CLDFORG:MC:M16X50, BOLT:PC8.8-CLDFORG:MC:M16X80, BOLT:PC8.8-CLDFORG:MC:M20X50, BOLT:PC8.8- CLDFORG:MC:M20X65, BOLT:PC8.8-CLDFORG:MC:M20X90, BOLT:PC8.8-CLDFORG:MC:M20X100, BOLT:PC8.8- CLDFORG:MC:M20X130, BOLT:PC8.8- CLDFORG:MC:M24X100, BOLT:PC8.8- CLDFORG:MC:M24X110, BOLT:PC8.8- CLDFORG:MC:M24X160, BOLT:PC8.8-CLDFORG:MC:M27X90, BOLT:PC10.9-BLK:MC:M16X40, BOLT:PC10.9- BLK:MC:M16X60, BOLT+NUT:MS-IS:1364- P.C.8.8:MC:M24X80, HT-BOLT:IS1364, PC8.8- BLK:MC:M20X70, "HT-BoLT:IS1364, PC8.8- BLK:MC:27X150MM", PC8.8-BLK:MC:M 36MM, PC8.8-CLDFORG:MC:M16, PC8.8-CLDFORG:MC:M20, PC8.8-CLDFORG:MC:M 24MM, SCREW HEX:IS2269 PC-12.9:MC:10X40MM, SCREW HEX:IS2269 PC- 12.9:MC:12X30MM, SCREW HEX:IS2269 PC- 12.9:MC:12X40MM, SCREW HEX:IS2269 PC- 12.9:MC:16X40MM, SCREW HEX:IS2269 PC-12.9- FT:MC:16X50MM, SCREW HEX:IS2269 PC-12.9- FT:MC:24X80MM, SCREW+S-IS:6761:12.9:MC:DXL- 12X50MM, HT-BOLT:IS:1364, BLK:MC:16X100MM, BLK:MC:20X80MM, BLK:MC:20X120MM, HT- BOLT(H/T):IS1364, B:MC:22X150MM, BLK:MC:27X160MM, BLK:MC:30X120MM, HT- BOLT(H/T):1364, BLK:MC:30X150MM, BLK:MC:30X160MM, BLK:MC:36X160MM, BLK:MC:M16, BLK:MC:M 22MM, BLK:MC:M 27MM, BLK:MC:M 36MM, BOLT:PC10.9- BLK:MC:M18X90, BOLT(H/T):IS:1364PC10.9- FORGD:MC:M27X180, SS-BOLT:AISI:304:MC:M12X60, BOLT- SS:AISI:304:MC:M12X65, HEX NUT-SS:AISI304:MC:12 MM, PC8.8-BLK:MC:12X60MM, HT- BOLT:IS1364, PC8.8-BLK:MC:20X65MM, "HT- BOLT(H/T):IS1364, PC8.8:MC:24X90MM", BLK:MC:12X50MM, BLK:MC:12X65MM, BLK:MC:12X80MM, BLK:MC:12X90MM, BLK:MC:M12X100MM, BLK:MC:16X50MM, BLK:MC:16X65MM, BLK:MC:16X80MM, BLK:MC:16X110MM, BLK:MC:16X120MM, BLK:MC:16X150MM, HT- BLT(H/T):IS:1364, BLK:M18X90MM, BLK:MC:M20X60, HT-, BLK:MC:20X75MM, BLK:MC:20X100MM, BLK:MC:20X110MM, BLK:MC:M20X150MM, BLK:MC:24X60MM, BLK:MC:30X180MM, BLK:MC:30X240MM, BLK:MC:30X 300MM, BLK:MC:M 18MM, BLK:MC:M20, BLK:MC:M 24MM, BLK:MC:M 30MM, SCREW HEX:IS:2269 PC-10.9-FT:MC:8X50MM, SCRW HEX SOC:IS2269 PC-10.9- FT:MC:M10X25, SCREW HEX:IS:2269 PC-10.9- FT:MC:10X50MM, IS8412, SLOTD CSK-STL:20X65MM, SLOTD CSK-STL:20X90MM, SLOTD CSK- STL:22X90MM, STUD TP-B:IS1862-B 8.8:MC:10X90MM, STUD-B:IS1862-B-HT-PC10.9:MC:M10X150, STUD-B:IS1862- B-HT-PC10.9:MC:M12X200, STUD-B:IS1862-B-HT- PC10.9:MC:30X100MM, STUD(F/T):IS:1862 P- 10.9:MC:M8X35, STUD(F/T):IS:1862 P-10.9:MC:M10X50, STUD-FT:IS:1862 P-10.9:MC:M10X65, STUD-FT:IS:1862 P- 10.9:MC:M16X70, STUD(F/T):IS:1862 P-10.9:MC:M30X140, STUD-FT:IS:1862 P-10.9:MC:M30X550, WASHER:PUNCH- A:MS:M16, WASHER:PUNCH-A:MS:30MM, SCREW+S- IS:6761:8.8:MC:DXL-12X65MM

M1537156963, M1537156964, M1560020301, M1537156965, M1537156966, M1553613009, M1519300041, M1519300042, M1519300043, M1537144730, M1537144731, M1560020204, M1537156967, M1516742404, M1553602505, M1515104816, M1559002405, M1559002406, M1537156969, M1508445845, M1507145964, M1507145965, M1515490250, M1508444900, M1533144832, M1533144753, M1533144754, M1508445970, M1508445971, M1505144818, M1508444743, M1512142003, M1508445972, M1508445756, M1515444354, M1515444355, M1515444356, M1537246040, M1505145109, M1502144744, M1508444744, M1503744795, M1515102411, M1535264107, M1518446740, M1518446741, M1518446742, M1553801913, M1503447251, M1564445120, M1534201102, M1518244818, M1564344770, M3192556065, M1508446059, M1515000259, M1553803724, M1516443600, M1503457843, M1553010006, M1515446484, M1516442704, M1560120274, M1560020240, M1508445843

Supply of different electrical maintenance materials like nut-bolts, rust cleaner, petroleum jelly, insulation tape, soap, etc. which are mainly used during the electrical shutdown work of Nabanna under NESD (PWD).

Supply, Testing, Installation and Commissioning and Demonstration of Hand Tools, Instruments, Equipment and Machinery etc. for the trade of Solar Technician (Electrical).

Supply, Testing, Installation and Commissioning and Demonstration of Hand Tools, Instruments, Equipment and Machinery etc. for the trade/course of CCNC Programmer.

Supply, Testing, Installation, Commissioning and Demonstration of Hand Tools, Instruments and different Machineries/Equipment for SOLAR TECHNICIAN (ELECTRICAL) and ELECTRONICS MECHANIC Trade.

Fabrication, galvanizing, testing, supply delivery at site of different structures including fasteners of 132 KV structures of 2nd 132 KV Main Bus at Newtown AA-III 220 KV Sub-Station under Saltlake Area Office, WBSETCL

Fabrication, galvanizing, testing, supply and delivery at site of different Structures including fasteners for Laxmikantapur 220/132 KV sub station , Subhasgram 220/132 KV Sub station and Serakol 132/33/25 KV Substation of WBSETCL

High Tensile Stainless steel Bolt size 12x60x40mm with Nut, 2 plain washers & 01 spring washer as per Drg. no. ETI/C/0073 MOD -A & RDSO Spec.no. TI/SPEC /OHE/FASTENERS/0120 REV 01 or latest.

Contact wire parallel clamp (LARGE) complete with fasteners, RDSO's Specification No. TI/SPC/OHE/FITTINGS/0130(10/13),Rev.1, RDSO's Drg: ETI/OHE/P 1030-2, Rev D, STR: CORE-STR-16, Rev-1.

Set of Stiffener plate with fasteners as per RDSO Drg.no.RDSO/CG/DRG/ 24034, Alt-02. With pitch between holes (P) =90 + / - 0.5 mm & Hole distance from edge(A)=30 + / - 01 mm) suitable for (OEM-FROINT

Set of Stiffener plate with fasteners as per RDSO Drg.no.RDSO/CG/DRG/ 24034, Alt-02. With pitch between holes (P) =100 + / - 0.5 mm & Hole distance from edge(A)=25 + / - 01 mm) suitable for (OEM-SONA

Supply of Expansion Type Terminal Connector to suit 50mm dia Aluminium tubular bus-bar to terminal pad of 25 KV Isolator/CT/CB & interrupter (RI No. 11061, 11062, 11063) with fasteners, as per RDSO Sp

CRASH WORTHY FAN GUARD ASSLY [TOP & BOTTOM] COMPLETE WITH BEADING PROVIDING SECURING CLAMPS & 2 CLIPS WITH SECURING FASTENERS MADE OF POLISHED STAINLESS STEEL GR. 304 AS PER ICF DRG No. ICF/SK 3-7-6

Supply of CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) as PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B. Make-CORE approved sou

STUD M16X65mm, PC 8.8, Thread pitch 1.5mm as per Ref.54 of RDSO Drg. no. SK.VL-584. Material: Steel as per IS: 1862. Make: LPS,TVS, VIF, Bolt Master, Deepak Fasteners only. Accepted Make - TVS

S.S. Bolt with Nut and Spring Washer (Size 10X30X30 MM) confirming to RDSO specification No. TI/SPC/OHE/FASTENERS/0120 REV-1 (MARCH 2017) or latest. MAKE- APL MANUFACTURER OF M/s Agarwal Fastners Pvt.

TERMINAL CONNECTOR (19MM) MULTIPLE HOLE (BOLTED TYPE) WITH COMPLETE FASTENERS AND ASSEMBLY, RI NO.1009&1009-1 AS PERRDSO DRG NO. ETI/OHE/P/1009 REV-A OR LATEST. Material is procured through CORE appro

Terminal connector (19 mm) Multiple hole (Bolted Type) with Complete fasteners and assembly, RI No.1009 & 1009-1 as per RDSO Drg No. ETI/OHE/P/1009 Rev-A or latest. Make-CORE approved source.

MAST BRACKET FITTING ASSLY.(150) COMPLETE WITH FASTENERS AS PER RDSO'S DRG.NO.- RE/33/P/3070 - 1, REV - 'H' or latest WITH RI NO. 3071-1, & RDSO'S SPEC.NO.- TI/SPC/OHE/FITTINGS 0130/(10/13).

PARALLEL CLAMP (150/105-150) COMPLETE WITH FASTENERS AS PER RDSO'S DRG. NO. - ETI/OHE/P/1050-2 REV-D OR LATEST. PROCUREMENT TO BE DONE ONLY FROM CORE APPROVED VENDORS. Firm offered make: AEPL

FLAXIBLE CONNECTOR FOR 25 KV CB, 25 KV INTERRUTOR AND 25 KV SIDE OF TRANSORMER WITH ALL SS FASTENERS, RI NO. 6482, 684 & 6842 RDSO SPEC. NO. ETI/PSI/P/6570 REV - F SBI MAKE

CONTACT WIRE PARALLEL CLAMP ( SMALL ) COMPLETE WITH FASTENERS AS PER RDSO'S SPEC. NO. - TI/SPC/OHE/FITTINGS/0130 ( 10/13 ) AND RDSO'S DRG. NO. - ETI/OHE/P/1040 - 2, REV - E. Accepted Make /Brand :-SBI

Terminal Connector (19mm) Multiple hole (Bolted Type) RI No. 1009, 1009- 1 with complete fasteners as per RDSO Drg. No. ETI/OHE/P/1009 Rev.-A or latest. Make Core approved only. . Accepted make / bran

LARGE SPAN WIRE (130 SQ MM) ENDING CLAMP COMPLETE ASSEMBLY (PART NO.1131,1102,1143, 261 with all fasteners) AS PER RDSO DRG NO.ETI/OHE/P/1140/Rev-B Make- CORE approved source only. Accepted Make/Brand

Bolted type Terminal connector (19mm) multiple hole bolted type with complete fasteners (RI NO: 1009) as per RDSO spec. no. TI/SPC/OHE/Fittings/0130-10/13 or latest. FIRM'S OFFER-MAKE/BRAND-Bolted ty

Terminal connector 19mm multiple hole bolted type complete set with fasteners as per RDSO Drg. No. ETI/OHE/P/1009 Mod-A or latest. Make/Brand: RDSO/CORE Approved source. -Accepted firms offer Make/Br

Kit for fasteners for fitting of secondary stopper pads of FIAT bogies consisting of 05 items as follows i) Flat counter sunk screw with hex socket head to IS: 6761/2023, Grade - 10.9, single: M8X45,

BATTERY FOR AIR CONDITIONING 2 VOLT 1100 AH VRLA FOR AC COACHES CONFORMING TO RDSO SPECN.NO. RDSO/PE/SPEC/AC/0009-2014 (REV.2) COMPLETE WITH INTERCELL, INTER UNIT AND END CELL CONNECTORS & fasteners e

Contact wire dropper clip (107) (1181) complete set with fasteners, As per Specification number: TI/SPC/OHE/Fittings/0130-10/13 (Rev-1), Conforming with drawing no: RE/33/P/1181 (Rev-G). Firm's offer

Terminal connector (19 mm) Multiple hole (Bolted Type) with Complete fasteners and assembly, RI No. 1009 & 1009-1 as per RDSO Drg No. ETI/OHE/P/1009 Rev-A or latest. Make-RDSO approved source.

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou

Suspension clamp complete with all accessories and fasteners as per RDSO Drg.No.RE/33/P/1160 Rev-K or latest ,Specification no.TI/SPC/OHE/ FITTINGS/ 0130 (10/13) with A & C slip no,1. MAKE/BRAND:NMPL

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou

Catenary ending clamp (65) complete set with fasteners as per Specification number: TI/SPC/OHE/Fittings/0130-10/13(Rev-1), Conforming with drawing no: ETI/OHE/P/1120 (Rev-B). Firm offers Make/Brand "

Hexagonal Head Full Threaded Bolt with 01 no. Hexagonal nut and 02 numbers plain washer Size: M10 x 130; Material: Mild Steel; Make/Brand: JDEW/GEC/Hero/Kova Fasteners/Grand or similar MAKE BRAND: SEL

Contact wire parallel clamp (PG clamp) complete with fasteners as per RDSO Drg No.ETI/OHE/P/6170 [Rev-C] & ID No.6171 or latest Firm's offer:Double contact wire parallel clamp RI NO.6171 complete with

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou