Hardware & Tools Tenders in West Bengal

G.I. SNAP HEADED Pin 20x65 mm RI NO. 264 AS PER RE DRG. NO. RE/33/P/260 REV. C OR LATEST AND RDSO SPEC. NO. TI/SPC/OHE/ FASTENERS/0120 REV. 1 OR LATEST.

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou

LARGE SPAN WIRE (130 SQ MM) ENDING CLAMP COMPLETE ASSEMBLY (PART NO.1131,1102,1143, 261 with all fasteners) AS PER RDSO DRG NO.ETI/OHE/P/1140/Rev-B Make- CORE approved source only. Accepted Make/Brand

Sub Item ID: 4200020040, Contact Wire Parallel Groove Clamp (RI No. 1031-3), Complete with fasteners as per RDSO Drg No.-ETI/OHE/P/1030-3, Rev-A or Latest. Spec, Make Brand- AEPL MAKE

Contact wire parallel clamp (small) 1040 -2 with GI fasteners as per RDSO Drg. No. ETI/OHE/P/1040-2 Mod-E or latest. Make: RDSO/CORE Approved source make. Consignee's requirement: Contact wire paralle

Bimetallic connector for ACSR ZEBRA (28.58 DIA) CONDUCTOR AND ALLUMINIUM/COPPER PAD OF ISOLATOR/CT/PT FRO 132 KV SYSTEM (RI 11030) AS PER RDSO SPEC. NO. ETI/PSI/P/11030 REV. C WITH FASTENERS

Large span wire ending clamp (130) (1131 & 1102) complete parts with all fasteners as per RDSO specification no. %u201CTI/SPC/OHE/Fittings/0130(10/13), Rev-1%u201D and drawing no. %u201CETI/OHE/P/1140

Double Contact Wire Parallel Clamp (RI 6171) Complete Assembly with Fasteners for section Insulator use as per RDSO Specification - TI/SPC/OHE/Fittings/0130-10/13-Rev-1 or latest and RDSO drg no. ETI/

Contact wire parallel Clamp (small) 1041-2 complete set with fasteners, As per Specification number: TI/SPC/OHE/Fittings/0130-10/13-Rev-1 & Conforming with drawing no: ETI/OHE/P/1040-2/Rev-E .

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers)AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sour

Set of Stiffener plate with fasteners as per RDSO Drg.no.RDSO/CG/DRG/24034, Alt-02. (TYPE-02) with pitch between holes (P)=90 + / - 0.5 mm & Hole distance from edge(A)=30 + / - 01 mm) ) suitable for

AUTOMATIC CENTRE LATHE CHUCK NH-26, ALLOY STEEL HRD & GRD, SIZE: 255 MM WITH SUITABLE BACK PLATE. READY TO FIT. HOLDING ATTACHMENT+FASTENERS WITH 01(ONE) SET OF SPARE JAWS. HSN CODE:8466. BRAND & MAKE

Double Suspension clamp complete with all accessories and fasteners as per RDSO drg. No.RE/33/P/1170,Rev-K & RDSO SPEC. No.-TI/SPC/OHE/Fittings /0130/(10/13) with A & C slip No.1

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers)AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sour

Contact wire parallel clamp (PG clamp) complete with fasteners as per RDSO Drg No.ETI/OHE/P/6170 [Rev-C] & ID No.6171 or latest Firm's offer:Double contact wire parallel clamp RI NO.6171 complete with

Stainless steel nut and bolt 10X35X30 mm with hole as per RDSO specification No TI/SPC/OHE/Fasteners/0120 Rev-1 (March-2017) as per RDSO Drg No. ETI/C/0073 , RI No. 10/16

Supply of CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B. Make-CORE approved source. Accepted Ma

PARALLEL CLAMP-(150/160) COMPLETE WITH FASTENERS , AS PER RDSO'S DRG. NO.- ETI/OHE/P/1050-3, REV.- 'A' & RDSO'S SPECN. NO.-TI/SPC/OHE/FITTINGS/0130(10/13) WITH A & C SLIP NO.1.

GI BOLT M16x50x38 WITH NUT, LOCK NUT AND WASHER (Flat & Spring). AS PER RDSO DRAWING NO: ETI/C/0073 & specification no.: TI/SPC/OHE/Fasteners/0120 Rev-1 (March- 2017). Accepted make/brand: RBE MAKE

Kit for fasteners for fitting of secondary stopper pads of FIAT bogies consisting of 05 items as follows i) Flat counter sunk screw with hex socket head to IS: 6761/2023, Grade - 10.9, single: M8X45,

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers)AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sour

CONTACT WIRE PARALLEL CLAMP (SMALL) COMPLETE WITH FASTENERS AS PER RDSO'S SPEC. NO. - TI/SPC/OHE/FITTINGS/0130 (10/13) AND RDSO'S DRG. NO. - ETI/OHE/P/1040 - 2, REV - E. Offered & Accepted Make: SBI

STOPPER WITH FASTENERS FOR LHB COACHES. Drawing No. : DRAWING NO. LA51125 ALT.-[b] & FASTENER CONFORMING TO ITEM NOS. 27, 29 & 32 TO ASSEMBLY DRG. NO. LA51102 ALT.[E] SHEET 2/2. Matl. & Spec. : AS PER

Terminal connector (19mm) Multiple hole (Bolted type) with all complete fasteners RI NO 1009 & 1009-1 confirming to RDSO DRG. NO. ETI/OHE/P/1009 REV A (Guarantee/warranty as per IRS condition of contr

STOPPER WITH FASTENERS FOR LHB COACHES. Drawing No. : DRAWING NO. LA51125 ALT.-[b] & FASTENER CONFORMING TO ITEM NOS. 27,29 & 32 TO ASSEMBLY DRG. NO. LA51102 ALT.[E] SHEET 2/2. Matl.& Spec. : AS PER D

Aluminium Parallel clamp (20/20) R.I. No 1551 complete set with fasteners as per RDSO spec. TI/SPC/OHE/Fittings/0130-10/13-Rev-1, Drawing No : ETI OHE P 1550 REV E or latest.

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou

Large Span Wire Ending Clamp (130)(1131 & 1102)complete with fasteners as per RDSO Spec. No.: TI/SPC/OHE/Fittings/0130-10/13-Rev-1, RDSO Drawing No.: ETI/ OHE/ P/ 1140. Firms offer: SEW

Supply of fluorescent paint marker paste for tamper proof marking of fasteners provided with tightening torque in 30 ml pack along with nozzle tip size 1 or 2 mm as per Annexure attached, Color: Yello

High Tensile stainless steel rustless U bolt with nut and lock nut,dia 10mm, RI No6034-S as per RDSO Drg. No.ETI/OHE/P/150 and spec. no. TI/SPC/OHE/FASTENERS/0120/REV-01.

Contact Wire parallel clamp (Small) RI No. 1041-2 complete with fasteners Stainless Steel Bolt 16x50x38 mm with nut and Phosphorus Bronze Spring washer as per Ref. Drawing ETI/OHE/P/1040 - 2 (Rev - E)

Counter weight guide tube 5.60mtrs long (5063-1) and packing piece(5067) along with bracket angle, but without fasteners (25 mm) NB light class, RDSO Spec: ETI-OHE-11(5-89) Rev.-1 (17.05.2018), IS_123

SUSPENSION CLEVIS ( 18MM ) COMPLETE WITH FASTENERS AS PER RDSO'S DRG. NO. - RE/33/P/1270-1, REV - 'F' AND RDSO'S SPECN. NO - TI/SPC/OHE/FITTINGS/0130 ( 10/13 ) WITH A & C SLIP NO. 1.

Counter weight guide tube 5.60mtrs long (5063-1) and packing piece(5067) along with bracket angle, but without fasteners (25 mm) NB light class, RDSO Spec: ETI-OHE-11(5-89) Rev.-1 (17.05.2018), IS_123

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou

PARALLEL CLAMP (150/105-150), R.I No.- 1051-2 COMPLETE WITH FASTENERS Bolt 16X50X38 with Nut & Spring Washer AS PER RDSO'S DRG.NO.- ETI/OHE/P/1050-2 REV-D OR LATEST.Firm's offer:PARALLEL CLAMP (150/10

LARGE SPAN WIRE (130 SQ MM) ENDING CLAMP COMPLETE ASSEMBLY (PART NO.1131,1102,1143, 261 with all fasteners) AS PER RDSO DRG NO.ETI/OHE/P/1140/Rev-B Make- CORE approved source ONLY. Accepted Make/Brand

SUPPLY OF PG (PARALLEL GROOVE) CLAMP (RI NO-1031-2) RDSO SPECIFICATION. ETI/OHE/P/1030-2 Rev-D OR LATEST WITH ALL FASTENERS & FITTINGS ETI/OHE/P/1030-2 REV-D MAKE/BRAND: AEPL

LARGE SUSPENSION CLAMP (20 MM.) (1581,1582) COMPLETE WITH ALL ACCESSORIES AND FASTENERS AS PER RDSO'S DRG. NO.- ETI/OHE/P/1580 REV - F or latest & RDSO SPECN. NO.- TI/SPC/OHE/FITTINGS/0130(10/13)

CORE Sub Item ID: 4200024024 Guy Rod Double Strap Assembly with fasteners (150/250) RI No. 5222 as per Drw: ETI OHE P 5221 2 REV D Spec: TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1,ETI-OHE-13 (4-84)

Expansion Type Terminal Connector to suit 50 dia Aluminium tubular bus-bar to terminal pad of 25 KV Isolator/CT/CB (RI No. /Part No. 11061, 11062, 11063) with fasteners, as per RDSO Specification TI

Catenary Wire Ending Clamp with Complete assembly (PART NO.1121, 1094,1092 AND 261) with Fasteners (Pin & washers) As per RDSO Drawing No. ETI/OHE/P/1120, REV-B or latest. Make-CORE approved source on

Supply of Expansion type terminal connector for 25KV, 60 mm dia Terminal for traction power transformer RI No.s 11221, 11222, 11223 &11224 complete set with fasteners as per RDSO Drg No. ETI/PSI/P/112

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers) AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sou

CATENARY WIRE ENDING CLAMP [65 SQ.MM] with Complete assembly (PART NO.1121, 1094,1092 AND 261) WITH FASTENERS (Pin & washers)AS PER RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest. Make-CORE approved sour

Terminal Connector (19 mm) multiple hole (Bolted type) with complete fasteners and assembly, RI No 1009 & 1009-I as per RDSO Drg ETI OHE P 1009 REV. A or latest Make- Any Core approved manufacturer

Supply of expansion type terminal connector to suit 50dia Aluminum tubular bus bar to terminal pad of 25 kV CT/isolator/CB and interrupter including fasteners as per drawing ETI/ PSI/ P/ 11060 mod.C o

Catenary ending clamp (65) complete set ( 1121,1092 and 1094) along with Fasteners ( snap head pin Dia 20/55, punched washer A22, split pin 4 x 40 ) as per RDSO specification No TI/SPC/OHE/ Fittings

Network tool kit, Change over switch, Screw driver set, Tool bag, Ratchet key set, Open spanner set, Tube cutter, Tee spanner

LV7 STLN VF F 8283900, Tool Kit NCVD F 4735000, LV7 TMB 2786 1813 9902, LV7 TMB 2752 2540 0105, LV7 TMB F 002C8Z863, LV7 TATA 2154 4110 0104, LV7 TATA L01402000027, Tool Kit BBD 2573 4290 0134, LV7 TATA L01402000035, Tool Kit BBD 4900000 001, LV7 TMB 2641 2910 0117, LV7 LD CVD X 4703311, LV7 TMB 2754 4660 0103, LV7 TMB 2786 1599 0113, LV7 TMB 2667 3375 0105, LV6 MT11 DLD NIV 02 2016 NSC 17