Highway Tenders in Andhra Pradesh

Construction of Greenfield no firll Airport at Orvakal In Kurnool District (A.P) under EPC system. Flexible pavements: Construction of New Runway 2000 M X 30 M. Turning Pads, Taxiway, Apron, Isolation bay, Shoulders to taxiway/apron/isolation bay. ... from highway to ...

Desilting of Wet silt in Jupalli Nagar, Sathavahana nagar highway in ward No:86 Gajuwaka, Zone-VI, GVMC.

Engaging JCB for Jungle clearance and filling with gravel From D.no: 21-261/662 to 21-261/663, From D.no: 21-261/651to 21-261/657, From Highway to 21-261/650, From D.no: 21-261/631to end Lakshmi Hotel to D.no: 21-261/531, From D.no: 21-261/440 to 21-261/379 at indhiramma colony at 49th ward in chittoor municipal corporation

Construction of Out Fall Drain at Budampadu Peekala Vaagu Near NH-16 Highway Service Road Div No 16 Under AE-15 Section.

Annual Maintenance of the State Highways 1 Ollapalem Vemulapadu road SH35 from Km.0.0 to 8/150, 26.0 to 49.00 2. Vaviletipadu Kamepalli Kondepi road SH303 from Km.0.0 to 33.8 in RB Section, Singarayakonda for the year 2026 27 in Prakasam District

Erection of one number NBT D type 66 KV plus 6 (58A) extension D/C DAM, Hampi I and II feeders under self Execution Scheme by the TB Board, TB Dam for getting the adequate/maintain vertical & horizontal clearances between tower location Nos 58 and 59 ... NH-63 Highway road

Estimate for erection of one number NBT D type 66KV 3(58B) extension D/C DAM - Hampi I & II feeders under Self Execution Scheme by the TB Board, TB Dam for getting the adequate/Maintain the required vertical & horizontal clearances between tower ... NH-63 Highway road.

Erection of one number NBT D type 66 KV plus 6 (58A) extension D/C DAM, Hampi I and II feeders under self Execution Scheme by the TB Board, TB Dam for getting the adequate/maintain vertical & horizontal clearances between tower location Nos 58 and 59 ... NH-63 Highway road

Giddaluru Nagara Panchayat - Drilling of 165mm dia 15 borewells and fixing of 7.50 HP / 15 stage pump sets near pick up Anicut near venkatapuram village to pump water to Giddalur Nagara Panchayat, Construction of 50 KL GLBR (3m staging near pick up ... the Highway / ...

Estimate for erection of one number NBT D type 66KV 3(58B) extension D/C DAM - Hampi I & II feeders under Self Execution Scheme by the TB Board, TB Dam for getting the adequate/Maintain the required vertical & horizontal clearances between tower ... NH-63 Highway road.

Giddaluru Nagara Panchayat - Drilling of 165mm dia 15 borewells and fixing of 7.50 HP / 15 stage pump sets near pick up Anicut near venkatapuram village to pump water to Giddalur Nagara Panchayat, Construction of 50 KL GLBR (3m staging near pick up ... the Highway / ...

Construction of Central dividers providing Beautification and Greenary arrangements from Market yard E.P.No. 25P/30W to NH65 Highway Flyover E.P.No. 137P/31W in kodad road (un-covered areas)

Supply and fixing of Electrical Poles with Lighting arrangements in centeral Dividers from santhinagar Arch,E.P.No. 121P/31W to NH65 Highway Flyover E.P.No. 139P/31W in kodad road (un-covered areas)

Desktop Computers (Q2)

Kanigiri Nagara Panchayat- 14th FC Basic Grant 2019-20 - Maintenance of roads - Improvement of existing road from (A) Pamur Highway to Ontipenta Venkateswarlu house (D. No. 1-62) (B) Surasani Venkateswarlu house (D. No. 1-78) to Polavaram road (C) Kikkiri Siva Kumari house (D. No. 2-93) to Nallabala Rajaiah house (D. No. 2-27) (D) Bandaru Guravaiah house (D. No. 1-31-1) to Bathula Yedukondalu house (4-10A) (E) Kasula Bala Guravaiah house (D. No. 1-35) to Eerla Thirupathaiah house (1-29-1) in Ward No. 6 of Kanigiri Nagara Panchayat.

Bharat Petroleum Corporation Limited invites offers for operating Dhaba/Restaurant, for its highway customers in its “COCO” retail outlet in BP NANDYAL in the prescribed format under a single part bid (Credential and Price Bid system). Bharat ... its highway customers ...

Monthly Basis Cab & Taxi Hiring Services - SUV; 5500 km Per month; Local 24*7, Monthly Basis Cab & Taxi Hiring Services - SUV; 5500 km Per month (16 Hrs/day); Outstation

Manpower Outsourcing Services - Minimum wage - Skilled; Not Required; Others, Manpower Outsourcing Services - Minimum wage - Semi-skilled; Not Required; Others

Shifting of 11KV/LT line at SS-2 and SS-3, Chandrampalem, Madhurawada in favour of M/s. Commissioner GVMC, Visakhapatnam for construction of Foot Over bridge on existing highway road, Madhurawada in Madhurawada Section in Madhurawada Sub-Division of Zone-III Division, Visakhapatnam Circle

Construction of CC Drain and culverts from DNo 26-9-755 toDNo 26-9-761 near church at janasakthi nagar in Div No - 22 of Nellore Municipal Corporation, A) B) from DNo 26-9-423/2 to DNo 26-9-422/2 near viswa sai college in Div No - 22,C) from DNo ... near National Highway in ...

18" Dia, X70, 12.70mm thick 3LPP

S and I of 8mm dia Aluminum alloy Solid Round Conductor, S and I of air termination rod of 2mtr length, S and I of air termination rod of 3 mtr length, S and I of Aluminum Straight conductor connector, S and I of Copper bonded Steel Round Conductor 20 mtr length, S and I of corrosion tape, S and I of Expansion Joint with connector, S and I of Lightning counter - LCD screen, S and I of Nylon Conductor Holder, S and I of Nylon Conductor Holder f, S and I of Polyamide Conductor holder, S and I of SS and Aluminum Alloy Connector, S and I of Stainless steel 304 Grade Cross Connector, S and I of Stainless Steel 304 grade Test Joint, S and I of Stainless-steel SS 304 Grade Conductor Holder, S and I of Stainless-steel SS 304 Grade Folding Clamp, S and I of stainless-steel Straight Connector, Sup and Inst of SPD

Custom Bid for Services - Transportation of Samples from VVSPL RBS to VVSPL GRS of 450 kms for QUANTITY 25 NOS, Custom Bid for Services - Transportation of Samples from VVSPL RBS to VVSPL VDS of 200 kms for QUANTITY 25 NOS, Custom Bid for Services - Transportation of Samples from VVSPL VDS to VVSPL GRS of 620 kms for QUANTITY 25 NOS, Custom Bid for Services - Transportation of Samples from VVSPL VBS to VVSPL GRS of 230 kms for QUANTITY 15 NOS, Custom Bid for Services - Transportation of Samples from VDPL Kadapa to VVSPL GRS of 440 kms for QUANTITY 15 NOS Similar Category Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products

POINT TYPE HCD VDS, 3C 1point5 SQMM CABLE VDS, FLP JB VDS, INSTN OF HCD SYSTEM VDS, POINT TYPE HCD RBS, 16C 1point5 SQMM CABLE RBS, 4C 1point5 SQMM CABLE RBS, FLP JB RBS, INSTN OF HCD SYSTEM RBS, POINT TYPE HCD VBS, 3C 1point5 SQMM CABLE VBS, FLP JB VBS, INSTN OF HCD SYSTEM VBS, POINT TYPE HCD SBS, 3C 1point5 SQMM CABLE SBS, INSTN OF HCD SYSTEM SBS, POINT TYPE HCD SRS, 3C 1point5 SQMM CABLE SRS, 12C 1point5 SQMM CABLE SRS, FLP JB SRS, INSTN OF HCD SYSTEM SRS

Indoor Plants, WHITE COTTON YARN WASTE, NURSERY PLANT DECOARTIVE, COW DUNG MANURE 1 TRACTOR LOAD, FERTILE SOIL 1 TRACTOR LOAD, VINYL STICKERING BOARD, ENVELOPES SMALL, ENVELOPES LEGAL, PRINTED BOOKS BOTH SIDES, PRINTED BOOKS ONE SIDE SIZE, PRINTED BOOKS LOG BOOK, PRINTED BOOKS BOTH SIDES TRIPLICATE, PRINTED BOOKS BOTH SIDES CROWN SIZE, PRINTED BOOKS BOTH SIDES SIZE LEGAL, PRINTED BOOKS BOTH SIDES PRINTING, SAMPLE TAGS COLOUR SIZE, Banner Printing Cloth Material

Sply of Mating Ring in Tungsten CarbideP, Sply of Cup T Washer Soc Set Screw C, Sply of Set of Springs in SS316Part No, Sply of RH Assy in CarbonPart No 1, Sply of Set of ORing in Viton Part No, Sply of Seal Ring in CarbonPart No b, Sply of Sleeve in SS316Part No 13 D, Sply of Seal Ring in Carbon Part No b, Sply of Seal Ring Assy in Carbon Part, Sply of Set of Springs in SS316 Part No, Sply of Mating Ring in TC Part No 2, Sply of Sleeve in SS316 Part No 13, Sply of Part No 7 T Bush, Sply of Viton O Ring Part No 6, Sply of Viton O Ring Part No 5, Sply of Viton O RingPart No 3, Sply of Mating Ring Part No 2, Sply of Viton O Ring Part No C, Sply of Seal Ring Part No B, Sply of O Ring for Sleeve in Viton Part, Sply of Sleeve in SS 316 Part No 9, Sply of 416 SS Hard DOG point screw

Pressure gauge of range Minus 1 to 5 Kg per Cm2 at VDS VVSPL, Pressure gauge of range 0 to 10 Kg per Cm2 at VDS VVSPL, Pressure gauge of range 0 to 100 Kg per Cm2 at VDS VVSPL, Pressure gauge of range 0 to 10 Kg per Cm2 at RBS VVSPL, Pressure gauge of range 0 to 100 Kg per Cm2 at RBS VVSPL, Pressure gauge of range 0 to 150 Kg per Cm2 at RBS VVSPL, Pressure gauge of range 0 to 30 Kg per Cm2 at RBS VVSPL, Pressure gauge of range 0 to 1 Kg per Cm2 at VBS VVSPL, Pressure gauge of range Minus 1 to 5 Kg per Cm2 at VBS VVSPL, Pressure gauge of range 0 to 10 Kg per Cm2 at VBS VVSPL, Pressure gauge of range 0 to 20 Kg per Cm2 at VBS VVSPL, Pressure gauge of range 0 to 100 Kg per Cm2 at VBS VVSPL, Pressure gauge of range 0 to 1.6 Kg per Cm2 at IPS3 VVSPL, Pressure gauge of range 0 to 2 Kg per Cm2 at IPS3 VVSPL, Pressure gauge of range 0 to 10 Kg per Cm2 at IPS3 VVSPL, Pressure gauge of range 0 to 16 Kg per Cm2 at IPS3 VVSPL, Pressure gauge of range 0 to 20 Kg per Cm2 at IPS3 VVSPL, Pressure gauge of range 0 to 160 Kg per Cm2 at IPS3 VVSPL

LINE PIPE 18" Dia, X-65, 9.53 mm thick 3LPP API5L PSL2, LINE PIPE 18" Dia, X-65, 9.53 mm bare pipes (12m x 4nos)

SERVICING OF FE DCP 9KG, SERVICING OF FE DCP 75KG, SERVICING OF FE CO2 2KG, SERVICING OF FE CO2 3 2KG, SERVICING OF FE CO2 4 5KG, SERVICING OF FE CO2 6 8KG, Servicing of 2 KG CLEAN AGENT, HYDROSTATIC TESTING FIRE HOSE, HYDROTESTING OF FE DCP 9KG, HYDROTESTING AND UST 75 KG DCP, HYDROTESTING OF FE CO2 2KG, HYDROTESTING OF FE CO2 3 2KG, HYDROTESTING OF FE CO2 4 5KG, HYDROTESTING OF FE CO2 6 8KG, HPT 2 KG CLEAN AGENT, PAINTING OF FE DCP 9KG, PAINTING OF FE DCP 75KG, PAINTING OF FE CO2 2KG, PAINTING OF FE CO2 3 2 KG, PAINTING OF FE CO2 4 5KG, PAINTING OF FE CO2 6 8KG, Painting of 2 KG CLEAN AGENT F, REFILLING OF CO2 CARTRIDGE 200GM, REFILLING OF FE CO2 2KG, REFILLING OF FE CO2 3 2KG, REFILLING OF FE CO2 4 5KG, REFILLING OF FE CO2 6 8KG, REFILLING OF 2 KG CLEAN AGENT F, SPLY DRY CHEMICAL POWDER, SPLY 2 KG CO2 FE HORN WITH ELBOW, SPLY 4 5 6 8 KG FE DISCHARGE HOSE, SPLY 9 KG DCP DISCHARGE HOSE NYLON, SPLY 75KG FE DISCHARGE HOSE, SUPPLY OF SAFETY PIN, SUPPLY OF RING PIN, SOP VINYL STICKER, SERVICE VINYL STICKER, HPT VINYL STICKER, Servicing of SCABA Its total, REFILLING SCABA CYLINDER, SPPLY FIRE HOSE SUPPLY Type B SS, SUPPLY OF AFFF 3, SUPPLY OF HELMETS, SPLY EARMUFF UNIVERSAL, SUPPLY OF SAFETY SHOES, SUPPLY OF GUMBOOTS, SPLY HAND GLOVES SUPPLY, SPLY WIND SOCKS SUPPLY, SPLY HAND GLOVES 33KV RATED, SPPLY WIND SOCK POLE WITH WIND SOCK, SUPPLY OF 200 GR CO2 CATRIDGE, SUPPLY OF FIRE BUCKET AS PER IS, SUPPLY OF SAFETY GOGGLES Bid Number ( ) : GEM/2025/B/6294618 Dated : 31-05-2025 Bid Document 1/61

Polymethyl Methacrylate (PMMA) (Acrylic) Sheets (V2) as per IS 14753 (Latest) (Q3) MSE Exemption for Years of Experience and Turnover

Polymethyl Methacrylate (PMMA) (Acrylic) Sheets (V2) as per IS 14753 (Latest) (Q3) MSE Exemption for Years of Experience and Turnover

Digital Storage Oscilloscope (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number : GEM/2025/B/6385380 Dated : 26-06-2025 Bid Document EMD Detail Required No 1/5 ePBG Detail Required No Splitting

SCR FULL CONTROLLER CARD PCB NO 052R1 CE, MODULE 52RA6, ELECTRO CAPSCREW 50mm 2500MFD 200VDC, CLAMP FOR CAPACITOR 4X1 50DCNCWESTERN, CONV DC DC IP90 270V AC DC OP5V3A12V1A, SEMICOND FUSE LINK 56A 690VAC, HV PF PSR PST MODULE PCB NO 053R1, SUNDRY MATERIAL, 1 PH FWHC SCR CONT MODULE PCB, WIRE WOUND SI COTED 2.5K RADIAL 25W, ELECTRO CAPSCREW 76mm, CLAMP FOR CAPACITOR 2X1 75 DC, POTENTIOMETER 10K 25mSHAFT 3W, CAM 12A 1P 2W NO OFF 380VAC KNOB, AUX XMER 1 Phase AC 270V 18 0 18V 20VA, PCONT MNX 25A 3PAC 240VAC CAT, PCONT MNX 18A 3PAC 1N0 240V AC CAT, ADD ON BLOCK 2NO 2NC CAT, ROT 63A 2P 2W W OFF 440VAC, ROT 63A 2P ON OFF 250VAC, ROT 100A 2P ON OFF 440VAC, Supply of SUNDRY MATERIA

Enamelled Round Copper Wire as per IS 13730 (Part 0/Sec 1) (Q3) MSE Exemption for Years of Experience and Turnover

Heavy Duty Electromagnetic Solenoid Coils, Heavy Duty Electromagnetic Snap on Solenoid Coils

Supply of Silica Gel Breather 2 Kg, Supply of Silica Gel Breather 5 Kg, Rewinding of MOTOR FROM 0.5 kW to 2.5 kW, Rewinding of MOTOR FROM 2.5 kW to 5.0 kW, Rewinding of MOTOR FROM 5.0 kW to 7.5 kW, Supply of Panel Locks, HRC Fuse 63 A DIN TYPE, HRC Fuse 6 A DIN TYPE, HRC Fuse 10 A DIN TYPE, HRC Fuse 32 A DIN TYPE, HRC Fuse 16 A DIN TYPE, HBC FUSE 2 10 A, Glass Fuse 0.25 A to 2A, Relay L T MN 2 Range 1.4 to 2.3 A 415 V, Relay L T MN 2 Range 9 to 15 A 415 V, Relay L T MN 2 Range 14 to 23 A 415 V, Relay L T MN 2 Range 30 to 50 A 415 V, ELCB 63 A 30 mA, ELCB 32 A 30 mA, MCB 16 A 2 Pole, MCB 32 A 4 Pole, MCB 10 A 2 Pole, MCB 6 A 1 Pole, MCB 63 A 4 Pole, MCB 20 A 2 Pole, SUPPLY OF 50 SQMM Copper cable, SUPPLY OF 6 SQMM EARTHING WIRE, SUPPLY OF 16 SQMM EARTHING WIRE, Supply of 4 mm ring type Copper lug, Supply of 6 mm ring type Copper lug, Supply of 16 mm ring type Copper lug, Supply of 25 mm ring type Copper lug, Supply of 35 mm ring type Copper lug, Supply of 50 mm ring type Copper lug, Supply of 70 mm ring type Copper lug, Supply of 100 mm ring type Copper lug, Supply of 16 mm pin type lug Copper, Supply of 25 mm pin type lug Copper, Supply of 10 mm pin type lug Copper, Supply of 70 mm ring type AL Lug, Supply of 95 mm ring type AL Lug, Supply of 120 mm ring type AL Lug, Supply of 185 mm ring type AL Lug, Supply of 240 mm ring type AL Lug, Supply of 300 mm ring type AL Lug, Supply of 25 mm ring type AL Lug, Supply of 35 mm ring type AL Lug, Supply of 50 mm ring type AL Lug, Supply of 16 mm ring type AL Lug, Supply of 0 10 mm Pin Type Copper Lug, 2.5 MFD Capacitor, 10 Sqmm 4 Core FR Industrial Flexible Cable, 3 PIN 16 A Plug Top, 3 PIN 6 A Plug Top, LED Tube Light 22 W, LED Tube Light 50 W, LED Bulb Screw Type 30 W, LED PANEL LIGHTS RED GREEN BLUE, iBELL 5MPLUS Extension Cord 5 Socket, 2.5 SQMM COPPER INSULATED WIRED RED, 2.5 SQMM COPPER INSULATED WIRED BLACK, 2.5 SQMM COPPER INSULATED WIRED GREEN, 3X150 mm Cable tie Set 100 Pcs pack, 3X300 mm Cable tie Set 100 Pcs pack, Nitrile Rubber Tape Self Adhesive tape, Supply of earthing Crocodile clip, Supply of 12V 7AH Battery, Suppl of 12 V 150 AH Battery, Supply of 12 V Battrey for VCB, Supply of 12 INCH Hexa Blade Heavy Duty, Supply of 12 INCH Hexa Blade Heavy Duty Frame, Supply of Cable Jointing Kit 2.5 SQMM 4C, Supply of Cable Jointing Kit 4 SQMM 4C, Supply of FLP Cable Gland 1 inch, Supply of FLP Cable Gland 3 4 inch, Supply of FLP Cable Gland 1 2 inch, Supply of FLP Cable Gland 1 1 4 inch, SUPPLY OF 63A 5 PIN FLP WP SWITCH SOCKET With Control Switch, SUPPLY OF 32A 3 PIN FLP WP SWITCH SOCKET With Control Switch, Supply of 16 A FLP Control Switch, 220 V 4 INCH PANEL Exhaust Fan, 5 Watt LED Light For Electrical Panels, RJ 45 Crimping Tool Set, RJ 45 Connectors, MCP Box for ESD, DC 110V Aux Contractor, 110 V Relays, Voltmeter Switch 3phase 415 V, Ammeter Switch 3 Phase 415 V, HAND GLOVES, ELECTRICAL 11 KV, HANDGLOVES, 33 KV, 33 kV Insulators, 5 kVAH, 415 V, 3 Phase Power Capacitor, 10 kVAH, 415 V, 3 Phase Power Capacitor, Supply of Cable Tray 50 mm, Supply of Cable Tray 100 mm, Supply of Cable Tray 150 mm, Supply of Cable Tray 200 mm, Supply of Cable Tray 300 mm, 4Core x 4 sq mm copper power cable, JOINTING KIT for 33 kv 120 Sq.mm, JOINTING KIT for 6.6 kV 11 kV 50 Sq.mm, JOINTING KIT for 6.6 KV 11 KV E 3 Core X 95 Sq.mm, JOINTING KIT for 6.6 KV 11 KV E 3 Core X Bid Details 2/72 120, JOINTING KIT for 6.6 KV 11 KV E 3 Core X 240 Sq.mm, JOINTING KIT for 1.1 KV 3.5 Core X 240 Sq.mm

Supply of Manageable Switches at VVSPL

SUPPLY OF FURNITURE

DC O OR P VOLTMETER, DC O OR P AMMETER, AC I OR P VOLTMETER, AC I OR P AMMETER, PSP VOLTMETER, CONTROL CARD 103A, CONTROL CARD 104C1, CONTROL CARD 105D1, CONTROL CARD 106Zn, CONTROL CARD 107, O OR P CONTACTOR TRU, PSP TRANSDUCER TRU, GPS ANTENNA TRU, GPS TIMER TRU, SPLY OF PERMANENT REF CELL, SURGE DIVERTER, O OR P VOLTAGE TRANSDUCER TRU, O OR P CURRENT TRANSDUCER TRU, Fuse Link NS10A, Toggle switch 2 Pole 2 way, DISPLAY BOARD for KS DB01, MOTHER BOARD for KS MB01, AUX TRANSFORMER, CONTROL CARD 118B, CONTROL CARD 118C, LIGHTNING ARRESTOR, RB1 BLEEDER RESISTOR, FILTER CONTROL CIRCUIT SPLY, FILTER CAPACITOR, DIODE 70 HMR 150 OR 120, DIODE 150 LF 120, Cu CuSO4 Half cell, REF VOLTMETER SELECTOR SWITCH 8 WAY, MAINS ON INDICATOR 22 5 DIA WITH WASHERS, REF FAIL SETTING CARD, SCR TAIL TYPE, REF ELECTRODE SELECTOR SWITCH 4 WAY, DC OUTPUT VOLTMETER CPPSM, DC INPUT AMMETER CPPSM, DC INPUT VOLTMETER CPPSM, DC OUTPUT AMMETER CPPSM, PSP VOLTMETER CPPSM, CONTROL CARD CECO104C1 CPPSM, CONTROL CARD CECO106 CPPSM, CONTROL CARD CECO107 CPPSM, CONTROL CARD CECO103B CPPSM, CONTROL CARD CECO30R CPPSM, CONTROL CARD CECO31R CPPSM OR TRU, O OR P CONTACTOR CPPSM, GPS ANTENNA CPPSM, GPS TIMER CPPSM, PSP TRANSDUCER CPPSM, VOLTAGE TRANSDUCER CPPSM, CURRENT TRANSDUCER CPPSM, DISPLAY BOARD for CPPSM, MOTHER BOARD for CPPSM, REF FAIL SETTING CARD CPPSM, AMMETER W OR EXT SHUNT, RB1 BLEEDER RESISTOR CPPSM, TRANSISTOR EVL31 050, 32A Small Fuse Holder, GLASS FUSE CPPSM OR TRU, VARIABLE RESISTOR AJB, SHUNT 50mV 5 A, SHUNT 50mV 10 A, SHUNT 75mV 75 A, GALVANIC ISOLATOR 230V AC OR 48V DC

Safety shoes (Men/Women) of Ankle type conforming to IS 15298 (part-II) : 2011

Supply of School Furniture

Custom Bid for Services - MISC EXPENSES AUDIT VISITS EVENTS RBS as per attached specifications

Custom Bid for Services - Valve Replacement Job SV3 SV4 at VVSPL RBS as per attached specifications

Custom Bid for Services - TPI FULL MANDAY, Custom Bid for Services - TPI HALF MANDAY Similar Category Hiring of Third-Party Inspection Agency Hiring of Third-Party Inspection Agency

Custom Bid for Services - Bathometry survey of GPB for river bed profile as per attached specs Similar Category Customized AMC/CMC for Pre-owned Products

Virtual Validation Tool kit with supporting Hardware

High Speed Data Acquisition Hardware

Handloom Cotton Turkish, Honeycomb and Huckaback Towels (V2) as per IS 854 (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Handloom Cotton Turkish, Honeycomb and Huckaback Towels (V2) as per IS 854 Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number ( ) : GEM/2024/B/5588406 Dated : 07-01-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Experience Criteria, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number ( ) : GEM/2025/B/5774498 Dated : 08-01-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Niobium Wire