Housing & Quarters Tenders in Jharkhand

Construction/Maintenance of Building

Providing and fixing of name plates for earth pits, PG Clamps, copper flats, copper lugs and sleeves for 1 x 4 MVA Quarry No. 01 and 1 x 3MVA Quarry No. 02 sub-stations under Purnadih OCP.

Fabricating, Moulding, casting, machining, supplying and fitting of CI end cover of KG 8 Motor, 30 KW of Moonidih Project

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Repairing of latch bar housing, bucket door and latch keeper and replacement of Rack-segment-05 nos. (02 nos. on RHS 03 nos. LHS) of Dipper handle assembly.

repair of Tie rod, Tie rod support, Both side and both end of Tie Rod, chassis housing, Bush making and fitting with dumper D-1318 of Purnadih project.

1. Gousing of cracked bare tower. 2. V joint bead welding on cracked portion by steel electrode. 3. Repairing of bracket centralizer , plate arrestor and housing plummer block.

1. Gouging of cracked bare tower. 2. V joint bead welding on cracked portion by steel electrode. 3. Repairing of bracket centralizer, plate arrestor and housing plummer block.

Cover for Cross Beam, Part No: M17554/2, Spring support assembly, Part-M16789/2, Bearing Housing Assembly, Drg No- M17110/2, Beam for deck, Part No: M17531/1

Grant of Lease of Railway Land for 99 Years for Development including Redevelopment of existing Railway Colony 236 Units quarters at Old Station Colony, Dhanbad

Mechanical repairing work of Rotor, End Cover as well as misc. work of stator housing of 375 KW as well as 350 KW mine dewatering motor of Giridih Project.

1. Dismantling of complete 02 nos hydraulic winch motor assly after cleaning fron outside. 2. Repairing of housing, welding, machining, grinding, honing, polishing, facing. 3. Hydraulic testing and fitting.

Comprehensive Annual Maintenance Contract (CAMC) for Cooling Appliances in Main Lab., Mg. Pilot Plant, LSTF Pilot Plant and Housing Areas (Club, Dispensary and executive hostel) of CSIR-NML, Jamshedpur

1. Dismantling and Fitting Complete Differential Crown Wheel with Tail Pinion Bearing, Bevel gear, Spider Kit etc. 2- Differential Crown housing, velding, repairing, Machining by Suitable Electrodes Proper Size.

Please Refer ANNEXURE B in Tender Document

Repairing of latch bar housing and welding of bucket door and Repairing of hoist drum drive gear teeth 22 nos. of EKG5A Shovel SI No. HMB-539 CIL No. 2591.

1. Dismantling of water pump assly. and hydraulic pump assly. cleaning. 2. Water pump impeller housing, welding, machining, polishing etc. 3. Hydraulic pump assly. body, welding, machining and facing etc.

Foam Mattress (V3) (Q3) ( PAC Only ) MSE Exemption for Years of Experience and Turnover

Waiting Area/Airport Terminal/Public Place/Reception area Chair or Seat (V2) (Q2) ( PAC Only ), Single/Double Wooden Bed with/without Storage (V2) (Q2) ( PAC Only ), Metal Beds (V3) (Q2) ( PAC Only ), Sofas (V2) (Q3) ( PAC Only ), Modular Table/Meeting Table/Centre Table (V2) (Q2) ( PAC Only ), Cafeteria Chair (Q2) ( PAC Only ), Revolving Chair (V4) (Q2) ( PAC Only ), Office Chair (V3) (Q2) ( PAC Only ), Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V3) (Q2) ( PAC Only

Metal Shelving Racks (Adjustable Type) confirming to IS 1883 (V2) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover

Executive Table (V3) (Q2) ( PAC Only ), Composite Office Tables confirming to IS 8126 (V2) (Q2) ( PAC Only ), Computer Table (V2) (Q2) ( PAC Only ), Modular Table Meeting Table/Centre Table (V2) (Q2) ( PAC Only ), Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V3) (Q2) ( PAC Only ), Revolving Chair (V4) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Day to day maintenance of electrical works of different quarters/offices/buildings/School/Local Thana, CISF Camp and Barrack etc. including OH lines at Dugda Coal Washery

Head Pulley Assembly, Belt Takeup Pulley Assembly, COC Drive Shaft with Sprocket assembly, COC take up Shaft Assembly, Weighing Roller Y561A, Weigh span Roller Y561B, Inlet Support Pan EG24.7, Drag Link Assembly - LH, Drag Link Assembly - RH, COC ... with Housing for ... with Housing for ...

Rotor Assy, Housing Friction Plate, Solenoid Switch, Brush Gear Assy, Feed Pump Assy, Bearing Tapper Roller, Sleeve Cyl Assy, Clutch Plate Assy, Assy Air Intake Pipe, Rep Kit Drying and Distributor

Repair and maintenance including exterior painting of G- Type, MG-Type, H-Type, MH-Type and TA-Type quarters at DVC Colony, Tilaiya Dam under T.K. Division Konar

Any Civil Work

Construction of overhead tanks_Rs. 96,86,769.19 and Water supply _ pipeline _External work_Rs. 1,13,84,398.6

Please Refer ANNEXURE B in Tender Document

1. Dismantling of complete transmission pump assly and after cleaning outside agency. 2. Repairing of housing welding machining grinding honing polishing and facing. 3. Transmission pump assly testing and full fitting etc.

1. Dismantling of complete hoist motor assly and stopper switch assly after cleaning from outside. 2. Hoist motor housing, welding, machining and facing etc. 3. Gear, welding, machining, polishing and straightening etc.

Repairing of Track assy. (LHS and RHS) and repairing of mast cylinder eye and repair of both side propel gear box driving sprocket, shaft and housing of IDM30 Drill Sl. No. 6839.

1. Dismantling of complete hyd. Winch motor assly after cleaning outside agency. 2. Repairing of housing welding machining grinding honing polishing facing. 3. Hyd. Winch motor assly. testing and full fitting etc.

1- Engine Air Compressor Complete Dismantling and Fitting and Broken Bolt out from Engine housing and all related Jobs removing, Fitting. 2- Air System Pipe Lines Complete Removing Repairing, Fitting O Ring

1. Repairing of operator cabin. 2 Repairing of cabin foundation broken portion. 3. Complete repairing of cabin platform. 4 Operator cabin ladder repairing.

Any Civil Work

Any Civil Work

Repairing different type of work i.e. A.C. element housing, rear suspension pin, making of eye pin, fitting of bushing, and hub repairing of Dumper sl. No. D1125 and D1127 of Gidi A Project.

1. GLAND RETAINER FOR 125 HP PUMP, 2. O RING NIT. RUBBER FOR 125 HP PUMP, 3. SLEEVE NUT (R), 4. SLEEVE NUT (LH), 5. BEARING HOUSING ( LH), 6. BEARING HOUSING ( R), 7. BEARING END COVER (LH), 8. BEARING END COVER (R), 9. STUFFING BOX BUSH CI, 10. ... BEARING HOUSING (THRUST ... BEARING HOUSING (COUPLING ...

Construction of residential and non-residential building (office building (basement plus Ground plus 4), 14 Nos. Type-II Qtrs. (G plus 6), 13 nos. Type-III Qtrs. (G plus 6), 5 nos. mixed type Qtr. (G plus 4 having 3 nos. type-IV qtrs., 01 No. Type - IV (Special) qtrs. and 01 No. Type-V Qtr. Electrical sub-station including development work, Internal roads, RCC sump, rain water harvesting, water supply line, drainage and STP Providing internal EI including street light, substation and LT distribution, DG set, lifts, fire alarm and PA system, Fire fighting system, CCTV and networking, conferencing system, solar photo voltaic system and VRV/VRF system) of Regional Passport office at Ranchi (Jharkhand) SH: Providing services of vehicle on hire basis for official use of ADG, Patna (HQ-Kolkata) at Kolkata)

(i) Bucket cylinder body assly dismental. (ii) Cylinder body housing polishing. (iii) Bend bucket cylinder piston rod straightening by hyd. press (iv) Piston rod scratch portion grinding. (v) Piston rod spray welding machining polishing.

Repairing and rewinding of 85 Nos. ceiling fan of different location of quarters, hospital, canteen, sale office, permit office, substation, vehicle office, excavation office, CISF camp etc in respect of SDOCM

Electric wirings 02 Nos. of quarters i.e Q.No.61A-Type of Sriram Chauhan Electrical Supervisor and Q.No.B-30/MN/349, A-Type of Anirudh Kr Singh, PF Clerk under Sijua Area

1- Air Compressor Complete Dismantling and Fitting and Broken Bolt out from Engine Housing with all related Jobs. 2- Complete Coolant Hose Assly Dismantling Fitting and Ring Kit replacement Fitting and Coolent Leakage Problem rectifying

1. Welding and ribs building of crowd mechanism, gausing by suitable electrodes. 2. Line boring of housing as per bush size for press fitting. 3. Hydraulic press fitment of bushing 06 no of crowd mechanism.

Complete repairing, overhauling, rectification, fabrication and maintenance works of one conveyor chain drive shaft assembly with provide and fixing of Bearings, Baring housing etc for Bharat West Falia Feeder Breaker Machine of AADOCM, Dhori area.

SHAFT WITH KEY AND NUT, IMPELLER, SUCTION SLEEVE, DELIVERY SLEEVE, SPLIT GLAND, OUTER BRG HOUSING WITH COVER, LOGGING RING, AIR RELEASE VALVE, COMBINED SEATING BUSH, BALANCE VALVE, NRV 200MM 8 HVY DTY SS 304 FLNG

Please Refer ANNEXURE B in Tender Document