JCB, Crane & Earthmoving Tenders in Jharkhand

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1.Front big safety glass fitting 12.5sqft. 2.Both side windows safety glass fitting 15sqft. 3.Back side safety glass fitting 15sqft. 4.Both gate upper and lower safety glass fitting 18sqft. 5.Rubber bit and lock fitting in all safety glass

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1.Repairing of front drive line with changing of cross bolt and bolt piling out and thread work Dumper SL No -60917 and D60042. 2.Repairing of cracked brace arm 02 nos and its mounting pin and repairing of LH trunnion cover Dozer T 13642.

Biannual Rate Contract for Hiring of 1( one) number Dozer having Engine capacity 310- 325 HP with Coal Blade attachment and 1(one) number Pay Loader having Bucket capacity more than or equal to 2.0 Tons for feeding of coal as per Scope of Work

Repairing/dismantling of both side worn-out under carriage and fitment of new under carriage assly, removal of broken bolts of track roller and sprocket bolt and nut and repairing of worn-out grooves of track roller 10 nos of Dozer SL.No.11667 of K

1 Repairing of frame and glass fitting work and charging of N2 gas etc work D60055 D60390 D60042. 2.Repairing of diagonal Frame cap both side and its bushing and operator cabin gat glass Dozer T13610. 3.Repairing of track tensioner and idler CK737

i) Complete repairing and rewinding of 3 phase,650 Amp. Air cooled Welding machine of Dumper and Dozer section ii)Repairing and rewinding of 3 phase,1.5 kw,440V Grinder Motor of Lathe room iii)Rep. and rewinding of 3 phase, 440V, 11kw Air Compressor.

Repairing of gear box, open gear wheel and gear pinion intermediate shaft with gear and input shaft with gear of 30 Te Capacity of EOT Crane of 170 Te Dumper Section at Main workshop of Rajmahal OCP

Following repairing work is to be done in LNT CK300 Excavator sl. no.- B168, EXC 2899 - Changing of worn out Slew Gear by new one after opening and removing of broken bolts. New Slew Gear supplied by CCL and Repairing of crack of upper carriage.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Repairing and rewinding of self-starter Lucas type 12V 04 nos. 2. Repairing and rewinding of alternator Lucas type 12V 04 nos.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

a) Repairing and Rewinding of Self Startor-02 Nos b) Repairing and Rewinding of alternator - 02 Nos

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Safety glasses with new rubber bit and rubber lock

Please Refer ANNEXURE B in Tender Document

1.Front big safety glass fitting 2.Both side windows safety glass fitting 3.Back side safety glass fitting 4.Both gate upper and lower safety glass fitting 5.Rubber bit and rubber lock fitting in all safety glas 6.Both side gate inner outer lock

Please Refer ANNEXURE B in Tender Document

1.Front big safety glass fitting 15sqft. 2.Both side windows safety glass fitting 15sqft. 3.Back side safety glass fitting 15sqft. 4.Both gate upper and lower safety glass fitting 18sqft. 5.Rubber bit and rubber lock fitting in all safet

Please Refer ANNEXURE B in Tender Document

a) Repairing and Rewinding 24V 50 MT Delco Remy 5 Pole Self Startor-03 Nos b) Repairing and Rewinding 24V Alternator Delco remy 160 Amps-03 Nos

1. Old tilt guard fitting portion worn out plate cutting/removing 2. Providing of m s plate on top and bottom portion drilling fitting by welding. 3. Tilt guard profile making. 4. Plate cutting, bending, joining and welding for tilt guard making.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

A. 1. Damage blade arm broken plate cutting in side lower and upper side B. 1. Front damage plate cutting size

Please Refer ANNEXURE B in Tender Document

SUPPLY AND FITMENT OF SPARES (CONTROLLER, MOMENT LIMITER, PRESSURE SENSOR DRUM, SHEAVE ASSLY-24F1 ETC) FOR 250MT KOBELCO MAKE CKE2500-2 CRAWLER CRANE (M/C. S/N.- JD04-02373) DEPLOYED AT BHEL-PSER 3X660MW NORTH KARANPURA SITE, JHARKHAND.

Please Refer ANNEXURE B in Tender Document

Repairing of rear suspension assemblies lateral control rod of CAT 773E Dumper Sl. No-1013 CIL No D13439 and 1014, CIL No D13440 repairing of cross arm/support arm and cross arm/support arm of BD155 Dozer Sl No-13602,CIL No-T3656 at AADOCM, Dhori A

Please Refer ANNEXURE B in Tender Document

A. 1.Damaged blade arm broken plate cutting in side lower and upper side-12 ft 4 inch B. 1.Damaged blade arm broken plate cutting in side lower and upper side-12 ft 4 inch

Please Refer ANNEXURE B in Tender Document

Damaged blade arm broken plate cutting in side lower and upper side New plate cutting , setting and welding in side lower and upper plate

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Custom Bid for Services - Annual Rate Contract (ARC) for Maintenance work in the field of electrical, mechanical & instrument section of Power House (Indoor & Outdoor) including Intake House, Dam Lighting, Crest Gates & Gantry Cranes along with Op A.. Similar Category Customized AMC/CMC for Pre-owned Products

Dismantling of 27 nos Machines of CCL press (HQ) Ranchi by removing groutingbolts/fastners, loading manually or by means of light crane loading these machine in their lots, transporting of these items from CCL press to Crs Barkakana and unlo

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; Diploma; Non-IT Technical, Manpower Outsourcing Services - Minimum wage - Highly-Skilled; License or Equivalent Qualification for Operation of Crane and Forklift; Non-IT Technical, Manpower Outsourcing Services - Minimum wage - Skilled; ITI; Non-IT Technical

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Repairing gearbox open gear wheel spur pinion intermediate shaft with gear and input shaft with gear of 30 te Capacity EOT Crane of 170 Te Dumper Section at..

1.Link cutting of old track chain 12 pc. 2. Old track chain pad cutting both side 1.5 inch size 12 pc. 3. Link pin removing with the help of hyd. press 05 pc.