JCB, Crane & Earthmoving Tenders in West Bengal

PROVIDING 1 NO. 300MT OR ABOVE CAPACITY TYRE MOUNTED HYDRAULIC MOBILE TELESCOPIC BOOM CRANE HAVING FIX JIB ON HIRING BASIS FOR RETROFITTING WORK OF ECO-HANDLING STRUCTURE PLATFORM AT BHEL-PSER DVC MEJIA 500 MW_UNIT 8 PROJECT SITE, WEST BENGAL.

Scavenge Hose, Roller Bearing, Hyd Hose 6 in 1 Clamp Showel, Joint Rnuekle for JCB 3DX, Hub Swivel for JCB 3DX, Track Link Rod for JCB 3DX, Wiper Blade for JCB 3DX, Ignition Switch for JCB 3DX, Bucket Pin for JCB 3DX, Bush for Bucket Pin for JCB 3DX, ... for JCB 3DX, ... for JCB 3DX, ... of JCB 3DX, ... of JCB 3DX, ... for JCB , ... of JCB 3DX, ... of JCB 3DX, ... of JCB 3DX, ... of JCB 3DX, ... of JCB 3DX

Engagement of different type excavator and tractor for remove ash from Irrigation canal (Right Bank Main Canal and Left Bank Main Canal) bed and drainage channel bed Near Bankdaha

Hiring of excavator Including Driver Fuel and Misc Charges with applicable GST required for SWM Works of Chandernagore Municipal Corporation. 08hrs per day for 240 Hrs Approximately 30 days

Custom Bid for Services - Carrying out Statutory load Test Dynamic and Static of TG Hall EOT cranes 115/30 TON with the help of balloons at DSTPS, Custom Bid for Services - Carrying out Statutory load Test Dynamic and Static of TG Hall EOT cranes 115/30 TON with the help of balloons at RTPS Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, and Installation of Plant Systems/Equipments (Version 2)

Supply of 3Nos EX-200 Big Poclain Machine and 1 No D-71 Small Poclain Machine(Includind Fuel and Operator) on Haier basis, at SOUTH DUM DUM MUNICIPALITY

Supply of 3Nos EX-200 Big Poclain Machine and 1 No D-71 Small Poclain Machine(Including Fuel and Operator) on Haier basis, at SOUTH DUM DUM MUNICIPALITY

complete Repairing /reconditioning and fitting of safety glass,Rubbers, Arm (LHS) and tilting guard for D-355 Dozer Sl. No. TR-483/P-11661 of Damagoria OCP, CV Area.

Work for BD355 Dozer Sl. No-G11466-1.Repairing of RHS and LHS under carriage assembly. 2.Repairing and reconditioning of both side final drive worn out bearing housing.

Custom Bid for Services - Deployment of Dozer on OTE with Online Reverse Auction basis for Coal Yard Management at MTPS DVC Unit 1 to 8 for Two 02 Years

Custom Bid for Services - Proposal for deployment of dozer Model D155 or equivalent capacity 320HP for six months 180 days for coal stock yard management at DSTPS DVC ANDAL

Supply of Gantry Rail of EOT Crane along with fitting accessories as per attached Drawing. Rail Trac, Supply of Rail Clamp along with required Bolts, Nuts, Washers etc., for fixing the Rail Clamp, Grade

Supervision, Rectification and Breakdown Maintenance job of 02 nos 125 30 Ton EOT Crane at TG Floor throughout the overhauling period of U8 DPPS

BREAKDOWN REPAIRING OR REPLACEMENT OF SPARES RELATED TO AUTO TO MANUAL OPERATION FOR SWING OF 20 TON TIL MAKE CRANE OF HME SECTION, BKTPS

Repairing/reconditioning of Gear box and clutch assly., brake system of ESCORT CRANE (8Te)Sl. No. 55, Model MOC8E of Damagoria OCP , CV Area.

Supply of Electronic Hanging/ crane mounted Weighing scale with printer of load capacity of 5000kg for various Substations and TLM office under ER-II

supply and installation a set of spare parts for 3T capacity EOT crane as per Annexure attached. Accepted Firm's Offer Make:- AS PER SPEC.

Double legged alloy steel chain suitable for 15T capacity EOT crane as per the enclosed specification. Firm offer: same as above. Make: AJ CHAIN

Heavy duty full gear coupling IS: 12405-1998. Size - 103-OD-220 mm. Suitable for EOT Crane. Firm?s Offered and accepted make : - ASE

Aux Hoist Drive Assembly 64 KN for New Design Crane, Slo. No. 2 of Drg. No. L&T/B 10099508 (New) + B 10099503 (New)

Floating SHAFT FOR 10T EOT CRANE LT GEAR BOX DRIVE OF UNIQUE MAKE IN SPC BAY AS PER RWG DRG NO.705011710500 MAKE- SII

BUSH FOR MAIN HOIST LIFTING BEAM OF 40/12.5T & 35/10T EOT CRANES AS PER DRG No.701014411190. NOTE: MATERIAL TEST CERTIFICATE SHOULD ACCOMPANY THE SUPPLY. MAKE- OWN MAKE(DSE)

Rail Tongs: They are used on cranes for rail handling projects MAKE/BRAND : CIW BRAND Firm must approve at least one quantity from the consignee before sending the bulk material.

Cleaning of spillage coal, slush and slurry in different conveyor area, control room and Silos including Engagement of JCB at new CHP under S B Area

Filling pot holes during monsoon period by contractual JCB at in crop of R-VIII seam at Bejdih Mouza under the leasehold of Chinakuri Mine-III

DRAZZIN AND EARTH WORK AT KASIARA RLI THROUGH JCB MACHINE FOR THE PURPOSE OF AGRICULTER within Dudkomra GP under Daspur-II Panchayat Samity, Fund - 5th SFC

Electrical Renovation and Maintenance Work of LBS, MMM, LLR, MS, JCB, VS, RK, RP, SN/IG, MT, BCROY Hall of Residences at IIT Kharagpur (Part-I)

Cleaning of spillage coal slush and slurry in different conveyor area control room and silo including Engagement of JCB at New CHP of Sonepur Bazari Project

Electrical Renovation and Maintenance Work of LBS, MMM, LLR, MS, JCB, VS, RK, RP, SN/IG, MT, BCROY Hall of Residences at IIT Kharagpur (Part-I)

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; Non-IT Technical; Crane Operator, Manpower Outsourcing Services - Minimum wage - Highly-Skilled; Non- IT Technical; Fitter, Manpower Outsourcing Services - Minimum wage - Skilled; Non-IT Technical; Fitter, Manpower Outsourcing Services - Man-days based - As per Scope of Work; Unskilled; As per Scope of Work

"Electrical(G) works in connection with (i) LLH-Strengthening of Crane Girder of L- SHOP Bay III & Bay IV with 25T Crane Gantry Capacity in Liluah Workshop Eastern Railway, (ii) Liluah Yard Augmentation for increasing wagon holding capacity,(iii) LLH-Re- modelling & Re-Construction of Electrical Power car, AC overhauling & finish Shop of Eastern Railway"

Comprehensive Annual Maintenance Contract of 06 nos. V.V.V.F Drive 50/10T EOT Crane along with 06 nos. lifting tackle of Assembly Shop and 02 Nos. V.V.V.F. Drive 15/5T EOT Crane along with 01 no. lifting tackle of Bogie Shop for the period of 02 years (24 months) at Dankuni Loco Works of CLW.

Comprehensive Annual Maintenance Contract of 06 nos. V.V.V.F Drive 50/10T EOT Crane along with 06 nos. lifting tackle of Assembly Shop and 02 Nos. V.V.V.F. Drive 15/5T EOT Crane along with 01 no. lifting tackle of Bogie Shop for the period of 02 years (24 months) at Dankuni Loco Works of CLW.

Reconditioning/remaking of holes (54 Nos.) for fitting sprocket segment on sprockets holes both LHS and RHS of Dozer Sl. No. TR-483/P-11661 at Damagoria OCP, CV Area.

Supply of 1 no. D-71 small Poclain Machine and 3 no Ex-200 Big Poclain Machine on hire basis (Including Fuel and Operator) at South Dum Dum Municipality.

Design Engineering Manufacturing Testing Supply and Delivery at Site of 5 Ton Capacity Grab Bucket Double Girder EOT Crane as per SOQR Item No A1.1 Inclusive of GST, Packing and Forwarding Charges of EOT Crane as per SOQR Item No. A.1.2 Inclusive of ... EOT Crane as ... EOT Crane as ...

13 mm diameter Ungalvanized steel wire rope , steel core (IWRC) RHO Lay, construction 18 x 7 , non rotating wire rope for Hydra crane , tensile strength 1770 N/sq.mm , conforming to IS: 2266 or latest, lubrication A1, both ends plain, along with Breaking load test , and SWL test certificate from NTH. LOAD TEST CERTIFICATE IN FORM NO 8 PART -1 AND PART-III as per W.B. Factory Act 1958 by competent person is required Competency certificate in form 29B As per W. B factory Act 1958 is required in vouch of competency of the competent person.

13 mm diameter Ungalvanized steel wire rope , steel core (IWRC) RHO Lay, construction 18 x 7 , non rotating wire rope for Hydra crane , tensile strength 1770 N/sq.mm , conforming to IS: 2266 or latest, lubrication A1, both ends plain, along with Breaking load test , and SWL test certificate from NTH. LOAD TEST CERTIFICATE IN FORM NO 8 PART -1 AND PART-III as per W.B. Factory Act 1958 by competent person is required Competency certificate in form 29B As per W. B> factory Act 1958 is required in vouch of competency of the competent person.

Reinforcement and reclamation of H-frame and Swing Circle worn out portion and removal of broken swing bolt of POC12 (B685)(Machine Model CK300, L and T make) Hydraulic Excavator.

320131400900 SUCTION FAN DIA 450 MM, 200395136500 AIR FILTER ELEMENT OUTER, 200331425400 AIR FILTER ELEMENT INNER, 200354420700 MASTER CYLINDER, 922200003010 FILTER ELEMENT, 922200003000 RETURN LINE FILTER, 200593425800 ROCK TOOTH, 200526419900 ... TO EXCAVATOR CV, ...

CROSS and BEARING ASSY, UNIVERSAL JOINT, TUBE, PIN, SHAFT, TOOTH SPROCKER, BOLT, HOSE, TACHO HOUR, CABLE TACHOMETER

SERVICE KIT, TM CONTROL VALVE KIT, TRANSFER AST KIT, M KIT PLANETARY 125SK01019, PUMP ASSY, PILOT PUMP, BOSS SPROCKET, ALTERNATOR, STARTER MOTOR, SENSOR ENG.OIL TEMP, SEAL RING ASSY, FLOATING SEAL, TOOTH SPROCKER, GASKET 1751111112, BOLT, NUT, PIN, TEMP. GAUGE, HOSE, F 223000 HORN 24V, HOSE ASSLY., HOSE ASSEMBLY 300CKD, LIFT CYLINDER SEAL KIT, SEAL OIL, MINOR KIT FINAL DRIVE, RECEIVER DRIER, AC COMPRESSOR, BINARY PRESSURE SWITCH, EXPANSION VALVE, REFRIGERANT R134A, AC GAS IN CAN

REAR VIEW CAMERA COMPLETEDGMS 2020, INSTALLATION OF DRIVERS FATIGUE ALARM, AUTODIPPER SYSTEM, BOARD, RETROREFLECTIVE, 3 X 3FT, SEAL RING, BEARING, SPACER, PIN, SEAL OIL, HOSE, BLADE TILT CYLINDER KIT, GASKET

Repairing of 02 Nos. 50MT Self-Starter, cabin glass, seat, back rest of Dozer SI. No.TR-483/P-11661 and one self-starter in (float) of Damagoria OCP, CV Area.

Repairing of Cabin, cabin door, window frame and fitting of safety glass in operator cabin and repairing of belly guard of Dozer Sl. No. TR-483 of DOCP,CV Area.

REPAIRING AND OVERHAULING OF ROAD ROLLER NO OB-52 (JESSOP MAKE 8-10 TON CAPACITY) AT ROAD ROLLER DEPARTMENT

Custom Bid for Services - AMC WITH SUPPLY OF ESSENTIAL SPARES AND CONSUMABLES & OPERATION OF CRANES AT GRSE FOJ UNIT AND TARATALA UNITS Similar Category Operation And Maintenance Of Electro-Mechanical Installations

Custom Bid for Services - Non Comprehensive Annual Maintenance Contract for existing EOT Cranes located at different sections of ferrous and Non ferrous area of MSF Ishapore as per scope of work

BUSH FOR MAIN HOIST CROSS HEAD OF 40/12.5T & 35/10T EOT CRANES AS PER DRAWING NO. 711014411130. NOTE: MATERIAL TEST CERTIFICATE SHOULD ACCOMPANY THE SUPPLY. Accepted make/brand- OWN MAKE.

MANUFACTURE, ASSEMBLY, TESTING AND SUPPLY OF 12 CUBIC METER CAPACITY CLAM SHELL CHARGING BUCKET FOR HANDLING STEEL SCRAP TO ELECTRIC ARC FURNACE THROUGH EOT CRANES TO RWF DRAWINGS NOS. 741080210130 SH