Logistics & Courier Tenders

Goods and Transport Service for Over Dimensional Cargo (ODC) - Towable BFL Qty 01; Any suitable truck as per requirement; Any suitable truck as per requirement; Outside city within state; 51-250 Kms

Goods and Transport Service for Over Dimensional Cargo (ODC) - Pushback tractor; Any suitable truck or trailer for transportation; Any suitable truck or trailer for transportation; Outside city within state; 501 - 1000 Kms

Goods and Transport Service for Over Dimensional Cargo (ODC) - Transportation of 10 feet pallet dollies 12 nos from kannur to delhi; Any suitable of truck; Any suitable of truck; Outside state; 2280

Goods and Transport Service for Over Dimensional Cargo (ODC) - Transportation of GSE from Chennai Airport to Surat Airport; Any Suitable Truck or Trailer; Any Suitable Truck or Trailer; Outside state; 1600 Kms

Goods and Transport Service for Over Dimensional Cargo (ODC) - Diesel Towable BFL; Any suitable truck or trailer for transportation; Any suitable truck or trailer for transportation; Outside state; More than 1000 Kms

1.Electrical portion of the work "Provision of CCTV and centralized monitoring system for monitoring freight activity over BSP division. 2. Electrical portion of the work " Provision of Foot Over Bridge at BHTK Railway station.

EMPANELMENT OF SHIPPING COMPANIES/ LINER/ AGENT AS FREIGHT FORWARDERS FOR EXPORTING LUBE/GREASE IN SMALLS, PACKS, BARRELS/LOBS (BULK) IN FLEXI TANKS IN ISO CONTAINERS BY SEA SHIPMENTS FROM JNPT MUMBAI PORT FOR THREE YEARS

Geo-Technical and Material Investigations for preparation of Detailed Project Report for Development of Economic Corridor, Inter Corridor and Feeder Routes to improve the efficiency of Freight Movement in India in the State of Punjab

Selection of Transaction Advisor for Taking Over the Container Freight Station CFS Facility from existing operator and Selection of new Operator Concessionaire for further operations and Development of CFS Facility of CONWARE at Navi Mumbai

NON-ASBESTOS BASED L-TYPE COMPOSITION BRAKE BLOCK FOR 1000 MM WHEEL DIA FOR FREIGHT STOCK, CONFORMING TO RDSO SPEC. No. WD-13- ABR-2019 TO RDSO DRG NO : WD-99062-S-01, ALT : 4.

Seal Wear Ring, CTRB, Class-E (6"x11%u201D) used on freight stock as per RDSO approved TIMKEN Drg. No. E-58579 (Rev. dated 03.09.2020), TIMKEN Part Drg. No. B-204944 and Part No. K153392.

Set of Gauges for measuring of Freight stock components details as per annexure -F. Note: Calibration certificate , material test certificate and carrying case for each gauge should be provided by firm along with supplied gauges.

Supply, Installation of Pre-engineered Portable cabin huts for extension of Level Crossings over DFC track at 11 Nos. of LCs in connection with construction of Western Dedicated Freight Corridor phase-II Vaitama Sachin section

Shifting of PHE pipe line 250 mm dia rising main due to Eastern dedicated freight corridor construction at Amritnagar Rail Gate Lodge under RCFA Division-I PHE Dte. (CH 199-630 to 199-690 KM)

Construction of Machine Maintenance Unit at DFC Ancheli Depot and Residential Quarters nearby various Indian Railway Stations between Sachin to Valsad in Gujarat state, in connection with construction of Western Dedicated Freight Corridor phase-II.

AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key with Key bolt for Freight Stocks Fitted wit

AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2 " X 9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key, Key bolt etc. for Freight Stocks Fitted

Non-Asbestos "L" Type composition brake block for freight stock for 840 mm wheel dia. Drawing No. :RDSOs Drg. No. CONTR-9404-S/11, Alt-07 Material and Specification : As per drawing and conforming t

SLACK ADJUSTER TYPE IRSA-600 COMPLETE FOR FREIGHT STOCK TO RDSO DRG.NO.WD-82064-S-01-RC, ALT-12 AND RDSO SPEC. NO.07-ABR-92 WITH AMNDT.4 OF JULY 2000. Make/Brand- Self/Own

AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key Key bolt etc. for Freight Stocks Fitted wit

Brake cylinder 300 mm for Brake Van for Freight Stock.Drawing No. : RDSO DRG. NO.WD-92051-S-11 Alt.3, Item 1 to 15 &17 in assembled condition. Material and Specification : As per Drawing and conform

Dirt Collector Assembly Complete for Freight Stock to RDSO'S Drg. No. WD-92051-S-03, Alt.No.- 4 (Four) and RDSO's Specn. No.02-ABR-02 with Appendix - E and Amendment No.4 of September 2016.

Non-asbestos L type composition brake block for freight stock to RDSO Drg. No. WD99062-S-01, Alt.- 4. Material and specification confirming to RDSO specification no. WD-13-ABR-2019 of April 2019. (Fir

Set of CBC Gauges for Freight Stock as per Attached Annexure A (One set Consists 07 Different Types of CBC Gauges) with Calibration certificate issued from NABL/Gov. approved test Lab valid for One Ye

AAR approved taper roller catridge bearing class K (6.5 inch X 9 inch) complete for use on freight stock BOXNS wagon with components and NArrow Jaw adapter as per Drg. No.RBSD-7077 with latest amendme

Dirt collector Assembly for Air Brake of freight stock to RDSO Drawing. No. WD-92051-S-03, Alt.No.4 confirming to RDSO Specification.No.02-ABR-02 with Amendment No.4 of September-2016 [Appendix-E].

LOCKING PLATE FOR UPGRADED CARTRIDGE TAPER ROLLER BEARING CLASS-'E' (6" x 11") OF FREIGHT STOCK TO RDSO's DRG.NO. WD-87019/S-1, ALT.NO. 3 AND RDSO's STR. NO. AB/RB-40-2016 (REV-2).

Locking Plate for cartridge tapered roller bearing (CTRB) Class E for Freight stock to RDSO Drg.no.WD-87019-S-1, Alt-3 and other technical requirements conforming to RDSO STR.no.AB/RB-40-2016, Rev.2 o

Double Crystal (TR) Probe 0 Degree, 20 mm, 4 MHz crystal size with integral cable with BNC Connectors. Compatible to Modsonic Make Machine. Model-ARYA-1(R). Rate is inclusive of Basic, GST and Freight

STRIKER CASTING WEAR PLATE FOR UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK TO DRG..NO.WD-87056/S-1, ALT 4. RDSO SPECN.NO.WD-70-BD-10, REV.3 OF MAY.2022. Firm's offer: Same as above.

SUPPLY,INSTALLATION OF PARTS WITH REPAIRING WORK OF FORKLIFT VOLTAS MAX 05 MTS AS PER LIST OF SPARES PART ATTACHED ANNEXURE A ( QTY = 08 ITEMS = 01 SET) WITH LABOUR , FREIGHT AND OTHER CHARGES IF ANY

Non-asbestos L type composition brake block for freight stock to RDSO drg. no. WD- 99062-S-01, Alt-4. Material and specification confirming to RDSO specification no. WD-13-ABR-2019 of April 2019.

Non-asbestos K-type Composition Brake Blocks for freight stock Spec. No. WD-14-ABR-2019 & Drawing No. WD-00006-S-01, Alt-3 or latest. ACCEPTED DESCRIPTION - Non-asbestos K-type Composition Brake Block

SLACK ADJUSTER, IRSA 600 FOR FREIGHT STOCK (CONTROL ROD LENGTH-1256/1254 mm) TO Drg.NO.WD-82064-S/1 RC, ALT.12 TO SPEC.No.07-ABR-92,Amendment.NO.5 of SEPT 2016 Firm's offered make: Self

Cone Roller And Cage Assembly for Upgraded CTRB Class-E [6 inch X 11 inch] For FREIGHT STOCK 22.3/22.9 Ton Axle Load Make-Timken Part No. HM129848F. (Cage Polymer- K159428 + Roller-HM129801+Single Con

AAR approved taper roller Cartridge bearing Class K ( 6.5'' X 9'' ) complete for use on freight stock BOXNS wagon with components and Narrow Jaw Adapter. as per RDSO Drg WD 15020 S 02 with latest

7/8" Dia. Lock Bolt & collar for Freight stock as per RDSO Drg. No. WD-11036-S-01, Alt.1, Grip range = 1." to 1.250" & Drg. No.WD-11036-S-02, Alt.Nil ACCEPTED MAKE/BRAND - BIMCO

POH Kit for brake cylinder 10" (inch) for BMBS on Freight stock consisting of 10 items as under- (1) Packing cup KBI Pt. No.766272, Qty. 1 No. /Kit (2) Expansion plug KBI Pt no.

Freight Stock Brake Cylinder Holding Chain for 11'' brake cylinder as per Escorts Drg. No. 4EB10266 or latest as per Drg.No. Escorts Drg. No. 4EB10266 or latest specn: RDSO Spec. No. WD-23-BMBS-2008

AAR approved Upgraded Class E (6"X11") Cartridge Tapered Roller Bearings (CTRBs) complete for use on freight stock of Indian Railways to RDSO STR No. AB/RB-40-2016 (Rev-2). Accepted description: AAR a

STRIKER CASTING WEAR PLATE FOR UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK TO DRG. NO. WD-87056/S-1, ALT 4 AND TO RDSO SPECN. NO. WD-70-BD-10, (REV.3) OF MAY 2022

Set of CBC Gauges for Freight Stock as per Attached Annexure A (One set Consists 07 Different Types of CBC Gauges) with Calibration certificate issued from NABL/Gov. approved test Lab valid for One Ye

Non Asbestos K Type Composite Brake Block for Freight Stock as per RDSO drawing no WD-15023-S-01 Alt. Nil or Latest confirming to RDSO Spec. No. WD-14-ABR-2019 with latest amendments.

BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FREIGHT STOCK TO RDSO's DRG. NO. WD-92051-S-11, ALT.NO.-3 (THREE) AND RDSO's SPECN. NO. 02-ABR-02, WITH APPENDIX-B. Accepted Make: RECON

POH Kit for QRV of C3W type Distributor Valve, for Freight Stock, Consisting of 6 Items as per List enclosed and other technical requirements conforming to RDSO Specification No.02-ABR-02 read with al

AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2 " X 9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key, Key bolt etc. for Freight Stocks Fitted

LOCK FOR TRANSITION AND NON TRANSITION UPGRADED HIGH TENSILE CBC AAR TYPE 'E'FOR FREIGHT STOCK TO RDSO SK. 62724,ALT.28,ITEM 8 AND TO RDSO SPECN.NO.WD-70-BD-10 REV.3 OF MAY.2022.

Distributor valve complete without common pipe Bracket and control reservoir for freight stock as per RDSO's Specn. No. 02-ABR-02, Appendix-A1 &A2 with Amendment No. 02 of Jan 2010. as per Specn. RDSO

Wear plate for striker casting(CBC housing) Size: Length 280mm x Width 75mm x Thickness 6mm as per IS: 2062, material : Mild steel. make:L1(AMBEY? ) @Rs 71/- +18% GST +Freight Rs 4.4 +Make:AE is accep

Pantograph for Freight Locos(AC application) as per RDSO spec no RDSO/2008/EL/SPEC/0066Rev. 0 dated 20.06.2008 and Amend 1 Dtd 31.12.08 Firm's Offer: PANTOGRAPH COMPLETE TYPE EL 01 WITH SERVO MOTOR ME