Loading
Loading…
Loading…
8,825 results • Best match
SLACK ADJUSTER TYPE IRSA-600 COMPLETE FOR FREIGHT STOCK TO RDSO DRG.NO.WD-82064-S-01-RC, Alt.-12 AND RDSO SPEC. NO. 07-ABR-92 WITH 5 AMNDTS.- LAST AMNDT. NO. 5 OF SEPT. 2016.
Distributor valve complete without common pipe Bracket and control reservoir for freight stock as per RDSO Specn.No. 02-ABR-02, Appendix-A1 & A2 with Amendment No. 02 of Jan '2010 and amendment No.4 o
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3.Matl.&Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock.
Upgraded High-Capacity Draft Gear Arrangement for Freight Stock to RDSO's Drg. No. WD-81010-S-03, ALT012, ITEM-19. Material and Specification Confirming to RDSO Specification No. WD-71-BD-15, REV-1 of
BRAKE CYLINDER 355 mm FOR FREIGHT STOCK, CONFORMING TO APPENDIX -B OF RDSO SPEC. NO. 02- ABR-02 WITH AMENDMENT No. - 4 of Sept. 2016 as per RDSO drawing WD - 92051- S-06, ALT : 5.
Non-asbestos K-type Composition Brake Blocks for freight stock Spec. No. WD-14-ABR-2019 & Drawing No. WD-00006-S-01, Alt-3 or latest. ACCEPTED DESCRIPTION - Non-asbestos K-type Composition Brake Bloc
PANTOGRAPH FOR AC FREIGHT ELECTRIC LOCOMOTIVES (WITH 5 % EXTRA THROTTLE VALVE) TO RDSO SPEC. No. RDSO/2008/EL/SPEC/0066, REV. '0' WITH AMENDMENT NO.1 DTD 31.12.08, TO MODIFICATION SHEET NO. ELRS/MS/0
AAR approved Taper Roller Cartridge Bearings class E(6"X11") complete for use on freight stock to Spec: AB/RB-40-2016(Rev.2) of June 2021 or latest amendment and Vendor panel ID : 3100249001.
BRAKE CYLINDER 355MM FOR FREIGHT STOCK TO DRG. NO. WD-92051/S-6, ALT.5 AND TO SPEC. NO. APPENDIX-'B' OF 02-ABR-2002, AMENDMENT NO.4 OF SEP.2016 Firm's offered make: KE
Seal Wear Ring (without vent hole) for Cartridge Taper Roller Bearing, Class-E, (6 x 11) used on freight stock to M/s NEI Ltd. Drg.no.PESD-6085, Rev.D, Part no.PESD-6075,Other Technical Requirements c
Supply and commissioning of Upgradation kit for 9000 HP freight locomotive (WAG-9HH) as per RDSO specification no, RDSO/2017/EL/SPEC/0127, Rev.'0' issued in May'2017. The execution of the contract sha
Yoke Pin for Transition and Non Transition CBC for For Freight Stock to RDSO DRG. No.SK-62724,Alt-28, Item No.12 Conforming to RDSO SPEC.No. WD-70-BD-10(Rev-2) of Nov.17
GODREJ INTERIO STEEL TABLE WITH STORAGE ON BOTH SIDE 1360MM X 690 MM X 735MM GEMC PRODUCT ID 5116877-68591246799 SPECIFICATION AS PER ANNEXURE 'A''ATTACH PAGE NO-1-6 MATERIAL REQUIRED AT TI -FREIGHT
AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key Key bolt etc. for Freight Stocks Fitted wit
AIR DRYER FOR FREIGHT STOCK ELECTRIC LOCOMOTIVE AS PER RDSO SPEC NO. MP0.01.00.06 REV-6, MARCH-2021 STR NO. MP STR.BK.01.06.11 REV-01, MARCH-2021 Firm's offer: Model no. LD2000120 for 3 Phase Loco
Brake cylinder 300 mm for Brake Van for Freight Stock. Drawing No. : RDSO's DRG. NO.WD-92051-S-11 Alt.3, Item 1 to 15 &17 in assembled condition. Material and Specification : As per Drawing and
NON-ASBESTOS L- TYPE COMPOSITION BRAKE BLOCK FOR FREIGHT STOCK TO RDSO DRG. NO. WD-99062-S-01, ALT-4, MATERIAL AND SPECIFICATION CONFIRMING TO RDSO SPECIFICATION NO. WD-13- ABR-2019, OF APRIL 2019.
Low Torque Grease Seal for AAR Standard Upgraded Class E (6 X 11) Cartridge Tapered Roller Bearings used in freight stock confirming to RDSO specification No. WD-63-MISC-2020 of October 2020 with late
POH Kit for common pipe bracket for C3W type D.V. consisting of four items, conforming to air brake maintenance manual for freight stock G-97, read with all amendments, latest Amendment. NO. 3 of JAN
AAR approved/RDSO approved Grease for cartridge Taper Roller Bearings of Freight stock conforming to RDSO specification No. WD-24-Misc.2003 (Revision-1) Exxon Arapen RB-320 of M/s Exxon Mobil Shell EP
Distributor valve complete without common pipe Bracket and control reservoir for freight stock as per RDSO's Specn. No. 02-ABR-02, appendix-A1 of Oct.2003 with amendment No. 03 of April-2010 OR LATEST
AAR Approved Cartridge Tapered Roller Bearings Class K (6 1/2X9) along with Backing Ring, Adapter, End Cap, End Cap Screw, Locking Plate, Side Frame Key, Key Bolt etc. for freight stocks fitted with L
Non-Asbestos "L" Type composition brake block for freight stock for 840 mm wheel dia. Drawing No. : RDSOs Drg. No. CONTR-9404-S/11, Alt-07 Material and Specification : As per drawing and conforming t
Upgraded High-Capacity Draft Gear Arrangement for Freight Stock to RDSO's Drg. No. WD-81010-S-03, ALT012, ITEM-19. Material and Specification Confirming to RDSO Specification No. WD-71-BD-15, REV-1 of
STRIKER CASTING WEAR PLATE FOR UPGRADED HIGH TENSILE CBC FOR FREIGHT STOCK WITH MANUFACTURER INITIAL AND MONTH AND THE YEAR OF MANUFACTURED BY METAL LASER ENGRAVING IN 6 MM SIZE AND 0.1 MM DEPTH MINIM
Test bench for all types of Slack adjuster barrel (SAB) for all types of freight stock as per figure no. 20 of G-92, (Complete RDSO specification copy attached and uploaded for detail drawing, descrip
NON-ASBESTOS LTYPE COMPOSITION BRAKE BLOCK FOR FREIGHT STOCK TO RDSO DRG. NO. WD99062-S-01, ALT-4 OR LATEST, MATERIAL AND SPECIFICATION CONFIRMING TO RDSO SPECIFICATION NO. WD-13- ABR-2019, OF APRIL 2
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3.Matl.&Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock.
Broad gauge wheel tyre defect gauge for freight stock (With flat tyre 60 mm as per Indian Railway Standard made of 3.8mm or 3.1mm thickness of Hardened stainless steel plate with laser marking used fo
SUPPLY OF DISTRIBUTOR VALVE COMPLETE WITHOUT COMMON PIPE BRACKET AND CONTROL RESERVOIR FOR FREIGHT STOCK AS PER RDSOs SPECIFICATION NO. 02-ABR-02, APPENDIX-A1 OF OCT-03 WITH AMENDMENT NO. 04 OF SEP-20
AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key, Key bolt etc. for Freight Stocks Fitted wi
POH Kit for QRV of C3W type Distributor Valve, for Freight Stock, Consisting of 6 Items as per List enclosed (CP-5) and other technical requirements conforming to RDSO Specification No.02-ABR-02 read
Description is as under, POH Kit for Automatic Pressure Modification Device (EL-60) for BMBS fitted on Freight Stock consisting of 23 items to M/S Knorr Bremse India Pvt. Ltd. part numbers as under:
UPGRADED CLASS 'E' (6"X11") CARTRIDGE TAPERED ROLLER BEARING USED ON CAST STEEL BOGIES (NARROW/WIDE JAW) OF FREIGHT STOCK OF INDIAN RAILWAYS FOR 22.9/25T AXLE LOAD APPLICATION TO STR No.AB/RB-40-2016
POH KIT FOR COMMON PIPE BRACKET FOR C3W TYPE D. V. CONFIRMING TO AIR BRAKE MAINTENANCE MANUAL G-97 AMNDT-3, FOR FREIGHT STOCK. DESCRIPTION QTY / KIT GREYSHAM, SIL, FAIVELEY PART NO. PART NO. TRANSPOR
Upgraded High-Capacity Draft Gear Arrangement for Freight Stock to RDSO's Drg. No. WD-81010-S-03, ALT012, ITEM-19. Material and Specification Confirming to RDSO Specification No. WD-71-BD-15, REV-1 of
BRAKE CYLINDER 355MM FOR FREIGHT STOCK TO DRG. NO. WD-92051/S-6, ALT.5 AND TO SPEC. NO. APPENDIX-'B' OF 02-ABR-2002, AMENDMENT NO.4 OF SEP.2016 Firm's offered make: KE
NON-ASBESTOS BASED L-TYPE COMPOSITION BRAKE BLOCK FOR 1000 MM WHEEL DIA FOR FREIGHT STOCK, CONFORMING TO RDSO SPEC. No. WD-13-ABR-2019. TO RDSO DRG NO : WD-99062-S-01. ALT : 4.
BRAKE CYLINDER 300 MM COMPLETE FOR AIR BRAKE ON FREIGHT STOCK TO RDSO's DRG. NO. WD-92051-S-11, ALT.NO.-3 (THREE) AND RDSO's SPECN. NO. 02-ABR-02, WITH APPENDIX-B. Accepted Make: KE
AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2"X9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key Key bolt etc. for Freight Stocks Fitted wit
Brake cylinder 300 mm to RDSO drg. no. WD-92051-S-11 Alt.3. Matl. & Spec. confirm to 02-ABR-02 with amndt. No. 4 of Sept.2016 Appindix-B for air brake freight stock.
Dirt collector Assembly for Air Brake of freight stock to RDSO Drawing. No. WD-92051-S-03, Alt.No.4 confirming to RDSO Specification.No.02-ABR-02 with Amendment No.4 of September-2016 [Appendix-E].
K-TYPE COMPOSITION BRAKE BLOCK FOR CASNUB BOGIE 1000MM WHEEL DIA FREIGHT STOCK TO DRG. NO. WD-00006-S-01, ALT. 3, SPECN. NO. WD-14-ABR-2019. Firm's offer: Asa bove. Make/Brand: COMPO
AAR Approved Cartridge Tapered Roller Bearings Class 'K' (6 1/2" X 9") along with Backing Ring, Adapter, End Cap, End cap Screw, Locking Plate, Side Frame Key, Key bolt etc. for Freight Stocks Fitted
"Dirt collector Assembly for Air Brake of freight stock to RDSO Drawing. No. WD-92051-S- 03, Alt.No.5, confirming to RDSO Specification.No.02-ABR-02 with Amendment No.4 of September-2016 [Appendix-E]."
M16 X 90 BOLT with Nuts & Split Pin for ESCORTS Design BMBS.Drawing No. - Escorts Drg.No. 4EB10272.Material and Specification - As per operation and maintenance manual of Escorts make BMBS for Freight Stock with Casnub Bogie
Supply, Installation and Commissioning of Automated and Computerised DV Test Bench Testing of Freight Distributor Valve with digital pressure gauge & timer as per attached Annexure A. Make : SURYA AUTOMATION SYSTEMS / ESCORT / KNORR BREMSE or similar..
Freight charges of Truck/load carrier for carriage of ST/PCC poles from 08 mtrs to 09 mtrs/ACSR Conductor and Distribution transformers of different capacities from Divisional store Kupwara to Tanghdar /Teetwal under Saubhagya.
Custom Bid for Services - Soil Investigation and Preparation of Architectural & Structural drawings for Special repair to security and Retaining wall at certain locations at AF Stn Digaru Similar Category Air Domestic Logistics service - Per Hour based
RFP for Selection of agency for Execution of Conceptualizing, Designing, printing and logistics of Tourism Diwali Cards 2025 for the UT Administration of DNH and DD (Only for creative branding and advertisement agencies empanelled with SPOTAC)