Industrial Machinery Tenders in Telangana

Repairs/overhaul, Re-commissioning of N2 plant working at GDK.11 Incline and to continue CAMC services for complete plant (N2 plant and Air compressor)

Set of 5 items for oil pump and filter as per annexure attached for ELGI make, model: TRC 1000 DCM model air compressor. Make: ELGI

Set of air filter Element FTIL port No 4046380008 and Air intake hose FTIL Part No. FT 0105239-001 for Faiveley Make Main Air compressor.

PROCUREMENT OF SEAL RING-Gear Box (Serial No 517562/10)

Providing Miscellaneous works like painting, Fabrication, errection to conveyor gantries and strengthening of crusher and other connected miscellaneous works for gantries and crusher at PKOC-IV, Manuguru, Bhadradri Kothagudem, Telangana

Cutter body for tool No: T26 of 5-Axis CNC machine, Walter Code: F4138.T36.040.Z03.33. Item should be suitable to 5-Axis CNC machine at RBK/YG.

Supply of Flexible Couplings for Booster Pump to Gear Box and Gear Box to Drive Turbine of TDBFP of 500 MW Unit

SHIFT UNIT FOR 2K300 GEAR BOX, PART NO: 4161.109. 202, ZF MAKE

RECTIFICATION OF RAM DROPPING PROBLEM IN 1600T HYDRAULIC PRESS(ISGEC), OFMK. NO: 2330 AS PER SCOPE OF

Upgradation of software and supply of spares for 200 Ton Hydraulic Press (Q3)

KTPS-VII Stage-O&M-II-MM-Replacement of total length of damaged conveyor belts of 1A,3A,5A&BF-4 Conveyors

PJP-LMC-Replacement of damaged gear box with new gear box for outfall regulator of gopaldinne balancing reservoir in weepanagandla (M) Wanaparthy (D)

Supply of KELVION (FORMERLY KNOWN AS GEA ECOFLEX) make spares for seal oil system Plate Heat Exchanger at STPP, Jaipur, Mancherial, Telangana

Procurement of Alfa Laval make gaskets for Turbine auxiliary equipment cooling water plate heat exchanger (TGECW-PHE) at STPP, Jaipur, Mancherial, Telangana

Engaging of JCB, Tractors and Air Compressor for Dismantling of Hindrance Structures which are located near Khilla Steps for Execution of Ropeway Project at Khammam Khila

DRAIN PLUG ASSEMBLY 3/8" BSP FOR ELGI MAKE AIR COMPRESSOR OF MODEL TRC 1000 MNUG AS PER ELGI PART NO: PART NO.A020033.Firm accepted offer:ELGI

Servicing of Ram head of Gantry CNC machine (Asset no. 201-2245)

SUPPLY OF DOUBLE REDUCTION GEAR BOX FOR WELLMAN FURNACE

SUPPLY OF PREMIUM WORM REDUCTION GEAR BOX U-800

REDUCTION GEAR BOX TYPE FU7 RATION 30 1 MAKE

Procurement of spares for Gear Box for Bhupalpalli Area

Procurement of KBN gear box for CHP OC-1

PREMIUM make Clinker grinder gear box set and spares

Actautor unit for Baruffaldi Gear box - Tacchi slotting machine

PROCUREMENT OF KCN GEAR BOX FOR CHP OCM1 RG3

PROCUREMENT OF GEAR BOX FOR RKP.CHP OF MM AREA

GEAR SET FOR GEAR BOX MODEL BH28/3D/OE9752097014

Air compressor TRC 1000 DCM- Main Compressor with motor for BG AC MEMU Motor Coach of type TRC1000DCM of M/s ELGI make make with working pressure 7 Kg per Sq.cm, FAD-1100 Liters/min speed116PM.

AZ Gear Box (Q3), EL drive (Q3), 1 No Main Shaft and Connecting plate for EL drive (Q3)

Dismantling, transporting and stocking of pre-weigh bin crusher unit with 650mtrs length conveyor system at MOCP in RG.I area.

Inserts for Tool No: T10 of 5-Axis CNC machine, Walter code: CCGT060204-X15 WTP35. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted make: WALTER.

Inserts for Tool No: T16 of 5-Axis CNC machine, Walter code: ODMT0605ZZN-D57 WKP35S. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted make: WALTER.

Drill Body for Tool No: T8 for 5-Axis CNC machine, Walter code: B2085-6436165. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted make : WALTER .

Inserts for Tool No: T20 of 5 Axis CNC machine. Walter code: ADGT1606PER-D51 WKP35S. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted make : WALTER.

W90414907353 REFERIGERATION GAS DRIER WITH SS HEAT EXCHANGER SPEC: TG60327 REV: 14 (Q3), W90414907175 DRG: . REV: 00 COMMISSIONING OF REF. GAS DRIER SPEC: TG60327 REV: 14 (Q3), W90414907299 EVAPORATOR TEMPERATURE CONTROLLER FOR REFRIGERATION GAS DRIER AS PER SPEC. TG60327 SPEC: (Q3)

Removal/Lifting of spilled coal from counter weights of conveyors, outside areas of Crusher House, TP-3, TP-4, TP-5 and underneath the conveyor galleries of BCN-4A/4B, 5A/5B, 6A/6B, 7A/7B and transporting to Stockpiles yards/ERH for FY 2023-24

250MT/2500 Hydraulic Press brake having a bending capacity of 8mm SS/12mm MSplates

Adhesives for cold and hot belt jointing works and conveyor pulley lagging works for all the conveyors in CHP/KTPS-V&VI stages

BIENNIAL SERVICE CONTRACT FOR ATTENDING BOILER TUBE FAILURE SERVICING OF HP VALVES IN STAGE 1 2 and 3 BOILERS AT NTPC RAMAGUNDAM

65CFM AIR COMPRESR WITH AIR DRYER, AIR RECEIVER 2 CUM for 65 CFM AIR COMPRSR RASAYANI, 33CFM AIRCOMPRSR WITH DRYER RECEIVER, 50CFM AIR COMPRSR WITH AIR DRYER, AIR RECEIVER1.2 CUM for 50 CFM AIR COMPRSR JALANDHR, AIR RECEIVER1.2 CUM for 50 CFM AIR COMPRSR NAJIBABD, 280CFMAIR COMPRSR WITH AIR DRYER, AIR RECEIVER 2 CUM for 280 CFM AIR COMPRSR GOPALGNJ, 25CFMAIR COMPRSR WITH DRYER RECEIVER, 33CFMAIRCOMPRSR WITH DRYER RECEIVER

Supply, supervision of installation and commissioning of Air Dryer and Air Filters before and after Dryer for Ingersoll rand make Screw type air compressor at LJHEP, Atmakur.

Custom Bid for Services - RELOCATION AND INSTALLATION OF STAGE2 MRS AIR RECEIVER TANKS IN STAGE2 DAETP TRANSPORT AIR COMPRESSOR AIR HEADER ALONG WITH PIPING AT NTPC RAMAGUNDAM

Rotair Advance Oil to Chicago Pneumatic Part No:1630144520 Suitable for Chicago pneumatic Screw Air Compressor (Each can -20 Liters ) make: CHICAGO PNEUMATIC Accepted make: CHICAGO PNEUMATIC

Servo Press-100 RR of M/s IOC for Air Compressor oil of WDG4/WDP4/WDP4D/WDG5 to RDSO Report No. MP.MI- 15 (REV.12) JAN 2019.

SULLUBE OIL for SULLAIR Electrical Driven Rotary Screw Air Compressor (500 CFM) Make:SULLAIR Model No. LS20-125HH, Part No. 87250022-669 (Supplied each can 18.9 liters), Make:Sullair

Carbon holder complete (LH) for KEC motor type KPC1 for Kirloskar make air compressor type 3HC55. As per KPA drg No.ER/KPA/EL/AX.2HE692B, item 1.

Carbon holder complete (LH) for KEC motor type KPC1 for Kirloskar make air compressor type 3HC55. As per KPA drg No.ER/KPA/EL/AX.2HE692B, item 1.

Cutter body for Tool No: T20 of 5-Axis CNC Machine, Walter code: F4238.B22.050.Z03.43. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted make : WALTER.

Special Cutter Body for Tool No: T3 of 5 Axis CNC Machine, Walter code: B4073-6074761. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted make : WALTER.

Cutter body for Tool No: T20 of 5-Axis CNC Machine, Walter code: F4238.B22.050.Z03.43. Item should be suitable to 5-Axis CNC machine at RBK/YG. Accepted Make: Walter