Medical Oxygen & Gases Tenders in Tamil Nadu

Oxygen and NOx Sensors

Set of Gas cutting items as given below; 1) Torch with nozzle:- 01 Set 2) Oxygen regulator (Single stage with dual gauge):- 01 Set 3) LPG Regulator:- 01No. 4) Rubber Hose pipe 8mm (Red and blue) 20 Meter each: -01 Set 5) Hose clip:- 8 Nos. 6) ... 8) Oxygen Key:- ...

Custom Bid for Services - CHARGING AND HYDROSTATIC TETSING OF PORTABLE OXYGEN BOTTLES FOR P8I AIRCRAFT IN 321 PART NO 4441106-111 SER 570550652 (QTY 02 NOs) Similar Category Repair and Overhauling Service

Custom Bid for Services - Pneumatic Testing for 01 No of 13 cubic meter cryogenic liquid oxygen LOX storage tank to be done as per Rule 19 of SMPV Rules at BHEL Ranipet

Industrial Compressed Oxygen gas dissolved in Cylinders to IS 309 / 2005. Note:- Supply should be effected in Staggered Quantity as and when required by the consignee for 12 months . (min 5 cylinder,

Supply of Compressed oxygen gas. Specification: No. IS:309/2005 in firms returnable cylinders. Delivery period may be fixed for one year with the condition that material should be delivered is pieceme

Supply of Compressed oxygen gas IS:309-1965 in firms returnable cylinders. Conditions (1) Material being required is piecemeal quantities as and when gas cutting works are one. (2) material should be

E M B AGAR (Eosin Methylene blue) AGAR. REAGENT preparation for chemical oxygen demand(COD) testing, to be supplied in plastic bottle with packing size of 500 g. firm offer - Himedia M317

Compressed Oxygen Gas For Industrial Use Including Welding And Cutting to IS.309/2005 (fourth revision). NOTE : 1) Supply should be effected in part quantity based on consignee request. 2) Empty cylin

Supply and Installation of Telemetery system for 6KL Oxygen Tank of INOX Make, Model: V0618EC including warranty and maintenance for 2 years from the date of commissioning. Note: Sim card charges, da

Supply of Compressed oxygen gas IS 309-1965 in firms returnable cylinders. Conditions: (1) Material being required in piecemeal quantities as and when gas cutting works are done, (2) Delivery period m

Procurement of ARGON 98% + Oxygen 2% Cylinders (Cylinder Gas Capacity is 7 Cubic Meters) for Body Jig Stage trial welding through LPC as the cylinders are urgently required. Make: Adhi Sakthi or Equiv

1/2" Isolation valve for oxygen with reducer nipple (3/4" x 1/2")(1/2" male x 3/4" female , working pressure 200 kg/cm2). Make : Techno/Bharat/Vanaz. FIRMS OFFER : TECHNO

Industrial Compressed Oxygen gas dissolved in Cylinders to IS 309 / 2005. Note:- Supply should be effected in Staggered Quantity as and when required by the consignee. Firm`s Offer : Same as above. M

Supply of Compressed Oxygen gas as per IS 309-1965 in firms returnable cylinders. Conditions:(1)Material being required is piecemeal quantities as and when gas cutting works are done.(2)Delivery per

"Double stage Oxygen Regulator Brass body, Inlet Pressure: 230-300 bar, Outlet Pressure: 0-10 bar, No. of Gauges: Two (ISO: 5171 certified), Inlet connection: 5/8 inch BPS Right hand, Outlet connectio

Supply of Compressed Oxygen gas as per IS 309-1965 in firms returnable cylinders. Conditions: (1)Material being required is piecemeal quantities as and when gas cutting works are done.(2)Delivery peri

Custom Bid for Services - PAINTING OF OVERHEAD PIPELINES CARRYING LPG AIR AND OXYGEN ALONG WITH CORRESPONDING STRUCTURAL SUPPORTS VIZ TRESTLES LADDERS AND PLATFORMS AND CONNECTING BRIDGES FOR HPBP UNIT 1 AT BHEL TRICHY

One set of Oxygen Fuel(LPG) heating torch shall consist of torch handle, Heating attachment with nozzle. 1)Torch handle shall be confirming to EN ISO 5172(Declaration of the conformance to the standar

Flash back arrestor for oxygen(Regulator end) having Non-Return Valve, Flame arrestor, spec.conforming to EN 730/ISO 5175-1/IS 11006/2011, Working pressure 10 BAR connection : G3/8 RH conforming to EN

Compressed oxygen gas IS 309-1965. Conditions: (1) Material being required in piecemeal quantities as and when gas cutting works are done, (2) Delivery period may be fixed for 6 months with the condit

Oxygen low pressure gauge size of the dial 50 mm. Dial with maximum outlet pressure 14 kg/cm2. Makes: GCE, ESAB REDEAGLE, MESSER, HMP & KEEAN only. Note: To be supplied by authorized dealers only. A

INDUSTRIAL WELDING GAS OXYGEN TO IS: 309/74 (II REV). 1. SUPPLY SHOULD BE EFFECTED IN PART QUANTITY BASED ON CONSIGNEE REQUEST. NOTE: 1) THE SUPPLIER SHOULD SUPPLY THE GAS WITH STANDARD CYLINDER. 2) S

Laying of New Liquid oxygen Pipe line at extension bay of New WR shed and CR shop 4 th- 5th Line, 7th-8th line at east end of CR shop in the premises of CW/PER

Flash Back Arrestors for :- 1. TORCH END-OXYGEN Working pressure10 bar; End fittings- RH threads of 3/8 inch. 2. TORCH END-ACETYLENE Working pressure1.5 bar; End fittings- LH threads of 3/8 inch. 3. R

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Leak Detection Compound, Oxygen Systems (Defence) (Q3)

Custom Bid for Services - Inspection Testing and Certification of Safety relief valve with unloading hose assemblies for LPG Bullet Safety relief valves for 13KL Liquid oxygen tank to be done under Rule 18 of SMPVU Rules 2016

FLASH ARRESTOR (DRY TYPE) FOR REGULATOR END OXYGEN LINES TO PREVENT FLASH BACK IN OXY FUEL SYSTEM CONFORMING TO EN 730/ISO 5175-1/15 11006 STANDARDS WITH FLAME ARRESTOR(FA) AND NON RETURN VALVE(NRV) A

FLASH BACK ARRESTOR(DRY TYPE) FOR REGULATOR END OF OXYGEN LINES TO PREVENT FLASH BACKS IN OXY FUEL SYSTEM CONFORMING TO EN 730/ISO 5175-1/IS 11006 STANDARDS WITH FLAME ARRESTOR(FA) AND NON RETURN VALV

FLASH BACK ARRESTOR(DRY TYPE) FOR REGULATOR END OF OXYGEN LINES TO PREVENT FLASH BACKS IN OXY FUEL SYSTEM CONFORMING TO EN 730/ISO 5175-1/IS 11006 STANDARDS WITH FLAME ARRESTOR(FA) AND NON RETURN VALV

Supply of compressed ready mixture oxyge [Supply of compressed ready mixture oxygen cum argon gas cylinder of 7 m3 Capacity gas mixture. Composition should be 98% argon IS- 5760/83 & 2% oxygen IS-309/2005 at filling pressure of 130kg/cm2 to 150kg/cm2. Note- (1) Supply is to be done as per CRWS requirement as and when required. supplier should provide the test certificate of gas with supply. (2) Transportation of cylinder either empty or full lies with supplier.]

One set shall consist of the following items 1. Brass Hose connector (for oxygen) suitable for gas cutting hose pipe of size: 8mm with Nut -3/8 inch with RHS thread and suitable nipple- 1 No. 2. Bra

SHIELD GAS-MIXTURE CONSISTING OF 95-99% ARGON GAS TO SPECIFICATION IS 5760-1998 OR LATEST GRADE 3 & 1-5% OXYGEN GAS TO SPECIFICATION IS 309-2005 OR LATEST, FILLED IN CYLINDERS WITH CAPACITY OF 7 CUM A

SHIELD GAS-MIXTURE CONSISTING OF 95-99% ARGON GAS TO SPECIFICATION IS 5760-1998 OR LATEST GRADE 3 & 1-5% OXYGEN GAS TO SPECIFICATION IS 309-2005 OR LATEST, FILLED IN CYLINDERS WITH CAPACITY OF 7 CUM A

HOSE PIPE FOR WELDING OXYGEN (BLUE), ID 8MM ,OD 15 MM, 15 METERS LENGTH,BURST PRESSSURE 50 KG/CM2 (MIN). WORKING PRESSURE 20 KGS (MIN), AS PER IS 447-1988 OR EN 559, DESIRED BRANDS - ADOR WELDING, GAT

One set shall consist of the following items 1. Brass Hose connector (for oxygen) suitable for gas cutting hose pipe of size: 8mm with Nut -3/8 inch with RHS thread and suitable nipple- 1 Nos. 2. Bra

HOSE PIPE FOR WELDING OXYGEN (BLUE), ID 8MM, OD 15 MM, 15 METERS LENGTH, BURST PRESSURE 50 KG/CM2 (MIN). WORKING PRESSURE 20 KG/CM2 (MIN), AS PER IS 447-1988 OR EN 559, DESIRED BRANDS - ADOR WELDING,

SHIELD GAS-MIXTURE CONSISTING OF 95-99% ARGON GAS TO SPECIFICATION IS 5760-1998 OR LATEST GRADE 3 & 1-5% OXYGEN GAS TO SPECIFICATION IS 309-2005 OR LATEST, FILLED IN CYLINDERS WITH CAPACITY OF 7 CUM A

Custom Bid for Services - PAINTING OF OVERHEAD PIPELINES CARRYING AIR LPG AND OXYGEN ALONG WITH CORRESPONDING STRUCTURAL SUPPORTS TRESTLES FOR HPBP UNIT I AND UNIT II BHEL TRICHY Similar Category Operation And Maintenance Of Other Machines And Plants

BULL NOSE CONNECTION STAINLESS STEEL 15, NUT HES BRASS 15 NB FOR SAMSON REGULATOR, PRESSURE REGULATOR 3 PORT, VALVE FLOW DIVERTOR BRONZE 25 NB, VALVE LONG STEM GLOBE SS BODY 15 NB, VALVE LONG STEM GLOBE SS BODY 25 NB, VALVE LONG STEM GLOBE SS BODY 6 NB, VALVE NEEDLE STAINLESS STEEL 1 by 4 NPT F, VALVE NON RETURN SS BODY BRASS TOP 25 NB, VALVE SAFETY RELIEF BRONZE1 by 2 NPT X 1, VALVE THERMAL RELIEF BRONZE 3 by 8 NPT

Title1, Title2, Title 3, Title 4, Title 5, Title 6

Sw Providing Front Elevation Oxygen Supply pipe Line arrangmts Furniture in waiting Hall Nurses station Meeting Hall Library and Museum to the newly constrd Addtl Bldgs OP and IP Block CEMONC Block TAEI Mortuary Bio Medical Waste Room Block

Custom Bid for Services - Inspection Testing Certification of Safety Relief valve with unloading hose assemblies for 20MT LPG bullet and Safety Relief Valves for 13KL liquid oxygen tank Similar Category Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant