Office Furniture Tenders in Delhi

Fire Resisting (Insulating) Filing Cabinets (FRFC) as per IS 14561 (Q2) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Experience Criteria, Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6585887 Dated : 19-08-2025 Bid Document 1/6 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 105020 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Cabin Table with side runner, Modular workstations, Revolving High Back Chair, Medium Back Chair, Overhead Storage Unit, Printer Table, Low Height Storage, Full Height Storage different size

Supply of office chair similar to Godrej interio office/ Visitor chairs with seat D x W x H 400mm 450mm 480 padded with Polyurethane foam Godrej Interio (CH7B) withWarranty : One year. Gem accepted

UNBRANDED OFFICE/VISITORS CHAIRS WITH SEAT DxWxH 400 mm x 400-500 mm x 400 mm Leatherette NA (office chair) Firm's Offer- Unbranded OFFICE/VISITOR CHAIRS with seat DxWxH-400mm-500mm 400 Leatherett

revolving chair MSME Exemption For Years Of Experience And Turnover No Revolving Chair ( 16 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back push back, 360 Degree swivel, posture control with multilocking position synchronized mechanism Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support 1/5 Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type push back push back, height adjustable backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, 3/5 pure leather, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 1025 * Backrest Height ±15mm 520.0 * Backrest Width ±10mm 550.0 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 460.0 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.0 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered YES YES, NO 4/5 product is ISO 9001:2015 certified OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sabbar Khan 110023, D-II/28, Kidwai Nagar (W), New Delhi 16 15

Modular Work Stations (Q3) ( PAC Only ), Revolving Chair (Version 2) (Q3) ( PAC Only )

REFRIGERATOR, REVOLVING CHAIR, BOROSIL GLASS, SERVING TRAY, DIGITAL WALL CLOCK BOQ Title BOQ001

Modular Work Stations (V2) (Q3) ( PAC Only ), Revolving Chair (V3) (Q2) ( PAC Only )

EOR to Drugs Control Department at Zonal Office, A-20 Lawrence Road Delhi (under CSS Scheme), during 2022-23. (SH- Renovation and Repair of 1st Floor Room along with Office Furniture) . (Civil and Electrical Composite Work)

Office Table, Storage - both side 4 storage Material of table top - MDF board Size - 1500*750*750 Top thickness - 18 mm Understructure thickness - 18 mm Warranty - 2 year Top edge bending - 2 mm edg

Modular Work Stations (V2) (Q3) ( PAC Only ), Executive Table (V2) (Q3) ( PAC Only )

Modular Work Stations ( PAC Only ), Executive Table ( PAC Only ), chairs-office ( PAC Only )

Wreath Stand Stainless Steel, Lancer Set, Lancer Flag, Executive Chair, HP Laserjet Toner

Office chair with out castors height 890MM, seat width 450MM, depth 430MM, chair type: with arms, Arm material: Wooden Teak, Type of seat and back rest: made of polythene cane. Warranty minimum two ye

Steel Clothes Lockers (Version 2) as per IS 3314 (Q3) ( PAC Only ), Steel Bookcases as per IS 7761 (Q3) ( PAC Only ), Storage cum Filing Cabinet (Q3) ( PAC Only )

Construction of School of Engineering and Atal Bihari Vajpayee School of Management and Entreprenurship at Jawaharlal Nehru University New Delhi (SH: Repair of office furniture and sofa of the office of CE & ED, IITDPZ, CPWD, New Delhi)

A/R & M/O to South Block, New Delhi during 2025-26 (SH: Shifting of Office Furniture, Electricals / Electronic Items, Documents and any other material from South Block and other office buildings in Lutyen Zone, New Delhi to Execute Enclave, New ... of office furniture , ...

revolving chair Revolving Chair ( 67 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Fixed Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better Back type push back push back, fixed, height adjustable backrest has false true, false 1/5 separate adjustable headrest Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking tilt limitor - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material 19 mm (+/- 2 mm ) ROUND pipe with cushion steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1125 1125 Backrest Height ±15mm 600.0 As per GeM Catalogue. 3/5 Backrest Width ±10mm 550.0 As per GeM Catalogue. Seat Height ±15 mm 450 450 Seat Width ±10 mm 550 550 Seat Depth ±10 mm 550.0 400, 460, 480, 500, 520, 550, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.0 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES BIFMA Certification YES YES OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. 4/5 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gajendra Kumar 110054, CCE(R&D) Delhi, P-1 Building, Metcalfe House Complex, Delhi 67 15

Revolving Chair, Computer Chair, Computer Table, Clerk Table, Side Table, Peg Table, Officer Table

chairs-office, Meeting Table, Revolving Chair Average Turnover (Last 3 Years) 3 Lakh (s)

Wooden Almirah/Wardrobe (V2) (Q2), Revolving Chair (V4) (Q2), Modular Work Stations (V2) (Q3)

Modular Work Stations (V2) (Q3), Executive Table (V2) (Q3), Free standing PARTITION PANEL (Q3)

Office Chair Frame Material-chrome on MS, Thickness of Plywood used in Seat %B11(mm): 12 mm, with Arms and ISO certified with warranty 02 years sold by OEM are the specification, other requirements su

Modular Extendable Conference Table (V2) (Q2) ( PAC Only ) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM ... Extendable Conference Table (V2) ...

EOR to Drugs Control Department at Zonal Office, A-20 Lawrence Road Delhi (under CSS Scheme), during 2023-24. (SH- Construction of Porta Cabin Room above Animal House Canteen Room alongwith Office Furniture). (Civil and Electrical Composite Work)

Modular Work Stations (V3) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Chair for General Purpose (Q2), Executive Table (V4) (Q2), Steel Almirah/Cabinets (V4) (Q2), Waiting Area/Airport Terminal/Public Place/Reception area Chair or Seat (V2) (Q2), Computer Table (V3) (Q2), Sofa (V3) (Q2), Curtains (V2) (Q3) (3 (3 ))

Modular Table/Meeting Table/Centre Table (V2) (Q2) ( PAC Only ), Steel Cloth Lockers (V3) (Q2) ( PAC Only ), Steel Almirah/Cabinets (V4) (Q2) ( PAC Only ), Revolving Chair (V5) (Q2) ( PAC Only ), Executive Table (V4) (Q2) ( PAC Only ), Sofa (V3) (Q2) ( PAC Only ) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

revolving chair Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest BLUE - Ergonomic Seat Design true true, false Yes is better Back type push back push back, height adjustable Backrest is made of Backrest is made of - 1/5 two pcs injection moulded frame two pcs injection moulded frame backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - 3/5 DIMENSION Overall Chair Height ±15mm 920 As per GeM Catalogue. Backrest Height ±15mm 410 As per GeM Catalogue. Backrest Width ±10mm 410 As per GeM Catalogue. Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 460 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.6 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/5 18001:2007 certified Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Neeraj Gautam 110092, NICSI DATA CENTRE Ist Floor, CORE - 2, SCOPE MINAR NEAR NIRMAN VIHAR METRO STATION LAKSHMI NAGAR 30 15

revolving chair Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type fixed push back, height adjustable Backrest is made of Backrest is made of - 1/5 two pcs injection moulded frame two pcs injection moulded frame backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism false - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden 2/5 Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - 3/5 DIMENSION Overall Chair Height ±15mm 990 As per GeM Catalogue. Backrest Height ±15mm 520 As per GeM Catalogue. Backrest Width ±10mm 480 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 480 420, 450, 520 Seat Width ±10 mm 480 440, 550, 4 60 Seat Depth ±10 mm 480 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.3 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO 4/5 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gajendra Kumar 110054, CCE(R&D) Delhi, P-1 Building, Metcalfe House Complex, Delhi 30 15

revolving chair Revolving Chair ( 159 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better Back type fixed fixed Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest true true, false Seat type fixed fixed Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 290 gram - DIMENSION Overall Chair Height 860 860 3/5 ±15mm Backrest Height ±15mm 460 As per GeM Catalogue. Backrest Width ±10mm 480 410, 440, 480, 500, 520, 550, 650, 680, 700, 720 Seat Height ±15 mm 450 450 Seat Width ±10 mm 440 440 Seat Depth ±10 mm 460 460.0 Thickness of M S Plate Joining the under structure with Seat 1.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES Green guard certification NO NO 4/5 Aiota - NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vinay Rao 110054, CCE(R&D) Delhi, P-1 Building, Metcalfe House Complex, Delhi 159 15

revolving chair Revolving Chair ( 155 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable backrest has separate adjustable false 1/5 headrest Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 65 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 65 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam liminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 860 As per GeM Catalogue. Backrest Height ±15mm 570 As per GeM Catalogue. 3/5 Backrest Width ±10mm 550 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 450 420, 450, 520 Seat Width ±10 mm 520 440, 550, 4 60 Seat Depth ±10 mm 500 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.5 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 55 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. 4/5 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SHASHANK SAHU 110011, Room No. 551-A, Nirman Bhawan, New Delhi 155 15

revolving chair Revolving Chair ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A - Ergonomic Seat Design false true, false Yes is better Back type fixed push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height 950 As per GeM Catalogue. 3/5 ±15mm Backrest Height ±15mm 500 As per GeM Catalogue. Backrest Width ±10mm 550 As per GeM Catalogue. Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 460 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.5 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO 4/5 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dipin Arora 110096, Maharaja Agrasen College Vasundhara Enclave 25 15

chairs-office, Modular Work Stations, Revolving Chair Bidder Turnover (Last 3 Years) 10 Lakh (s)

revolving chair Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Revolving Chair ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt, push back, knee tilt synchronic, central tilt synchronic, only revolving without tilting mechanism, 360 Degree swivel, posture control with multilocking position synchronized mechanism, Bio Synchronic, Advance Bio Synchronic, Auto return mechanism, Forward Tilt Mechanism, Forward tilt synchronic mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With, Without Type of backrest support backrest with lumber support of backrest with lumber support of 1/6 polypropylene at multilevel across back polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement 4(up & down end left & right) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels 2/6 Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 - 3/6 Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - DIMENSION Overall Chair Height ±15mm 810 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 520 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 440 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 480 420, 450, 520 Seat Width ±10 mm 480 440, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.5 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 4/6 Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm 25 mm, 120 WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 AMRAPALI DIXIT 110029, A-1, SAFDARJUNG ENCLAVE 1 15 EMD Required No ePBG Required No

revolving chair Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt, push back, knee tilt synchronic, central tilt synchronic, only revolving without tilting mechanism, 360 Degree swivel, posture control with multilocking position synchronized mechanism, Bio Synchronic, Advance Bio Synchronic, Auto return mechanism, Forward Tilt Mechanism, Forward tilt synchronic mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of 1/6 polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A - Ergonomic Seat Design true Back type height adjustable push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 4-Position Locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels 2/6 Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - 3/6 Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1025 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 570 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 440 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 520 420, 450, 520 Seat Width ±10 mm 480 440, 4 60 Seat Depth ±10 mm 520 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.2 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 4/6 Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A 25 mm, 120 WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Swati Jain 110077, National High Speed Rail Corporation Limited Asia Bhawan Road-205 Sector-9 Dwarka 30 15 EMD Required No ePBG Required No

Steel Almirah/Cabinets (V4) (Q2) ( PAC Only ), Steel Filing Cabinets for General Office Purpose conforming to IS 3313 (V2) (Q2) ( PAC Only ), Metal Shelving Racks (Adjustable Type) conforming To Is 1883 (V2) (Q2) ( PAC Only ), Executive Table (V4) (Q2) ( PAC Only ), Modular Table/Meeting Table/Centre Table (V2) (Q2) ( PAC Only ), Sofa (V3) (Q2) ( PAC Only ) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

revolving chair Revolving Chair ( 80 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest true Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 4-Position Locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & adjustable integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 65 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover Innner frame Upholstered with Mesh fabric and mounted on main assembly mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - 3/5 DIMENSION Overall Chair Height ±15mm 1180 As per GeM Catalogue. Backrest Height ±15mm 600 As per GeM Catalogue. Backrest Width ±10mm 480 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 450 420, 450, 520 Seat Width ±10 mm 520 440, 550, 4 60 Seat Depth ±10 mm 520 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SHASHANK SAHU 110011, Room No. 551-A, Nirman Bhawan, New Delhi 80 15

revolving chair Revolving Chair ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment false * Height Adjustment ± 5(mm) up to 90 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/5 Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism false * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Steel covered with polypropelene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * DIMENSION Overall Chair Height ±15mm 950 * Backrest Height ±15mm 460 * Backrest Width ±10mm 480 * Seat Height ±15 mm 480 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO YES YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ROSHAN KISHORE 110003, 2nd floor, Core -6, SCOPE Complex, 7 Lodi Road 20 15

Modular Workstations 18mm Plywood Construction, Cove Lighting, Electrical Wiring for Workstations, Storage Units 18mm Plywood Construction, Stepped Floor Elevation for Workstations and Raised Platform for Table, Cladding of Existing Concrete Pillar

Construction of Engineering Block 99B and 99C at IIT Delhi (SH- Providing and Installation of Office Furniture Including Misc. Civil and Electrical Works) (SH- Hiring of Inspection Vehicle for Official Use of the Assistant Engineer, IIT Project Division-I, CPWD)-Recall

Fire Resisting (Insulating) Filing Cabinets (FRFC) as per IS 14561 (Q2) ( PAC Only ) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 4 Bid Number : GEM/2025/B/6853821 Dated : 21-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 4 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Two Seater Sofa, Single Seater Sofa, Side Table, Centre Table, Console Table, Wooden Chair, Office Table, Computer Table, Small Office Table

Sofa 3 seater, Conference Table for 30 persons, Centre Table, Chairs, High Back Chair, Dining Table, Dining Chair, Peg table

revolving chair Revolving Chair ( 6 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type Advance Bio Synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest cream * Ergonomic Seat Design true true, false 1/5 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material aluminium covered with pu steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 1220 * Backrest Height ±15mm 730 * Backrest Width ±10mm 480 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 500 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 2 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 60 * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 60 * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 M. Vasudevan 110016, NATIONAL INSTITUTE OF FASHION TECHNOLOGY, NEAR GULMOHAR PARK, HAUZ KHAS, NEW DELHI 110016 6 30

Computer Table (Q3), Classroom Chairs (Q3), Steel Tables- IS: 8126 (Q3), Revolving Chair (Version 2) (Q3)

Visitor Chair, Revolving Chair, Outdoor Speaker, PA Amplifier, Speaker Wire BOQ Title BOQ of Visitor Chair

Modular Work Stations (V3) (Q2), Revolving Chair (V5) (Q2), Free standing PARTITION PANEL (Q3) (3 (3 ))

Steel Tables ( PAC Only ), Almirah Steel ( PAC Only ), chairs-office ( PAC Only ), Revolving Chair ( PAC Only )

Modular Metal Drawer File Cabinet Pedestal (Q3) ( PAC Only ), Revolving Chair (Version 2) (Q3) ( PAC Only )

CCTV Camera With Installation, Mission HB Tesr Strip 50 Pc Box, Accucheck 50 Test Strips, Drill Machine One Year Warrenty, Insulation Tape, Combat Cloth, POE Switch 3 and 4 Port, 3 Pin Plug, Tata Sky, Portable Speaker, CHAIR HIGH BACK VERGO OFFICE CHAIR, ... BAR REVOLVING CHAIR ,