Office Furniture Tenders in Rajasthan

Providing and fixing of Furniture like Workstations, Chairs, Compactors etc. at the office of DGCoA, Shahjahan Road Kota House, Delhi.

Office Chair (V3) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Bidder Turnover, OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6552180 Dated : 08-08-2025 Bid Document 1/7 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 7647 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

chairs-office Chairs-office ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair solid wood solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover polyster knitted with cane, leather foam, plastic 1/4 net, leather, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) N.A 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material wood MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M - Material of Fabric of Seat Cover fabric black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 35 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 250 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material wooden As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 40 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 60 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type fiber - DIMENSION Size of Material (mm) 40 mm teak wood 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/4 Chair Height ±15(mm) 700 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 450 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 450 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 430 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 400 mm As per GeM Catalogue. Arm Length ±5(mm) 490 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 50 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest blue - Paint Type N.A chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint NA - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered YES YES, NO 3/4 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 5 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Girraj Prasad Sharma 303303, GOVT. SHASTRI SANSKRIT COLLEGE, LALSOT ROAD, DAUSA 25 15

chairs-office Chairs-office ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest false - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover polyster knitted with cane, leather foam, leather, leatherite 1/4, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) N.A 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material STAINLESS STEEL MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M - Material of Fabric of Seat Cover polyurathane black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 40 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material NA As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) N.A 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 75 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type plastic - DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/4 Chair Height ±15(mm) 890 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 450 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 430 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 350 mm 350 mm, 480 mm Backrest Height ±10(mm) 300 mm As per GeM Catalogue. Arm Length ±5(mm) N.A 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) N.A 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type N.A chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered NO YES, NO 3/4 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh Gaur 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 150 15

chairs-office Chairs-office ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest false - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Made of Polythene cane Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover polyster knitted with cane, leather foam, leather, leatherite 1/4, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material MS MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M - Material of Fabric of Seat Cover fabric black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 290 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material Polyurethane on metal As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 40 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type PVC - DIMENSION Size of Material (mm) 16 gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/4 Chair Height ±15(mm) 890 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 430 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 460 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 470 mm As per GeM Catalogue. Arm Length ±5(mm) 400 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 25 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest blue - Paint Type N.A chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint NA - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand NO YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered YES YES, NO 3/4 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shiv Lal Meena 302015, Executive Engineer, RSAMB, Fourth Floor, Kisan Bhawan, Lal Kothi, Tonk Road, Jaipur 5 15

chairs-office Chairs-office ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair solid wood solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leather knitted with cane, leather foam, leather, leatherite 1/5, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material wood MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of Seat Cover leather foam black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 40 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) N.A 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material Padded Cushion Upholsted With Leather On Metal As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 20 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber - DIMENSION Size of Material (mm) 40 mm teak wood 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 2/5 gauge tubular pipe Chair Height ±15(mm) 1000 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 450 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 500 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 460 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 430 mm 350 mm, 480 mm Backrest Height ±10(mm) 450 mm As per GeM Catalogue. Arm Length ±5(mm) 300 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 40 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 YES - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO 3/5 OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 NIRMAL KUMAR JAIN 327001, HDJ GOVT.GIRLS COLLEGE BANSWARA NEAR OLD BUS STAND BANSWARA (RAJASTHAN) 20 15

chairs-office Chairs-office ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest false - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite knitted with cane, leather foam, leather, leatherite 1/4, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material CRCA pipe with wooden sheet MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 35 Kg/Cub.M - Material of Fabric of Seat Cover black leatherite black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 35 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material polypropelene As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber - DIMENSION Size of Material (mm) 2 mm thick 25 mm tube 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/4 Chair Height ±15(mm) 800 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 400 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 350 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 400 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 350 mm 350 mm, 480 mm Backrest Height ±10(mm) 350 mm As per GeM Catalogue. Arm Length ±5(mm) 250 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 25 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest blue - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered NO YES, NO 3/4 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Minakshi Jain 303702, MORIJA ROAD, BEHIND POWER HOUSE, CHOMU 10 15

Center Table Wooden, OC Board Stand 12x18 inch, Wksp Offr Board Stand 12x18 inch, OIC TSS Board Stand 12x12 inch, Office Chair

Deep Freezer Voltas 277 Ltrs, Food Warmer Four Holes, Mixer Grinder Sujata, Iron Jali 3 Inch, Prescription Slip, Medical Case Sheet, Request for Special Investigation, Executive Chair, AFO Fire Ball 1 Point 3 Kgs

REVOLVING CHAIR WTHOUT TILTING, REVOLVING CHAIR WITH TILTING, CHAIR ARM WITH BACK, RO 20 LPH, WATER DISPENSER FLOOR SATINDING, NEWS PAPER STAND, WALL MOUNTED FAN 400 MM, TOKEN DISPLAY SYATEM WITH MICRO CONTROLLER BASED TECHNOLOGY, LED TV 50 INCH, MOBILE FOLDING WARD SCREEN HAVING FOLD WITH CURTAIN, DIGITAL LED VISION CHART DOT PATTERN LED DISPLAY, OUTDOOR SLIDE WITH WAVE DEGIN SURFACE MADE OF HDPE MATERIAL, FLOOR MATT FOAM SIZE 10 FTX10 FT, DOOR CURTAIN 4X7, SOFA SET 5 SEATER

Revolving Chair (V4) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case ... process. Revolving Chair (V4) ... - Revolving Chair (V4) ... category Revolving Chair (V4) ...

Brief Cases, Pedestal Fan, Inverter Trolley Wooden, Office Table with Glass Top 3x4, Office Table with Glass Top 3x2, Water Dispenser alongwith Water Bottle, Extension Cord, Water Camper, Wall Mounting Fan, Plastic Stool, Mattress Single Bed, Foot Mat, First Aid Kit Box, Ajanta Quartz Digital Wall Clock, Umbrella Large Size, Cushion Chair

Shoe Shiner, Spiral Machine Legal Page, Office Chair, Battery, Paper Shredder, Split AC 2 Ton, Steel Photo Frames BOQ Title OFF EQPMT BOQ

Modular Table, Modular Work Stations, Revolving Chair, Almirah Steel-IS:3312, Metal Shelving Racks-IS:1883, Steel Bookcases-IS:7761, Chairs-Office- IS 3499, Public Place Seating Chair, Clothes Lockers - Steel-IS:3314, Multifunction Machines MFM

INVERTER WITH BTY, WATER PUREFIER 50 LTR IN 1 HOUR, EASEL STAND, WATER PUMP 1.5HP, VOLTAGE STABLIZER FOR AC 1 KVA, WALL MOUNTING FAN, FIRE EXTINGUISER BALL TYPE, LANCER STEEL, LANCER FLAG FOR OFFICE, EXECUTIVE TABLE

185 Ltr freeze, Office Chair, RO service and repair, Split and window AC 1.5 ton service, Tyre bucket wooden polish, Chick 7.5 x 9

chairs-office Chairs-office ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest false N/A Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors With With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite knitted with cane, leather 1/5 foam, leather, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material STAINLESS STEEL MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M N/A Material of Fabric of Seat Cover leather foam black leatherite, leather foam, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M N/A Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 250 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material polypropelene CRCA pipe, wooden teak, virgin plastic, fiber, chrome mild steel, NA, polyprope lene, polyurethane, Poly propelene on metal, Polyurethane on metal, wooden, Padded Cushion Upholsted With Leather On Metal, Padded Cushion Upholsted With Leather Leatherite On Metal, Polyurethane padded on Plastic Thickness of Polyurethane Foam Used in Backrest IN 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm 2/5 MM (+/- 3 mm) Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber N/A DIMENSION Size of Material (mm) 16gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 950 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 450 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 450 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 460 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 500 mm 300 mm, 350 mm, 700 mm, 430 mm Arm Length ±5(mm) 300 mm 200 mm, 250 mm, 300 mm, 490 mm Arm Width ±2(mm) 50 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest N.A N/A Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated 3/5 on MS, N.A Colour of Paint NA N/A CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA N/A ISI Marked false N/A BIS Licence No NA N/A Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shiv Lal Meena 302015, Executive Engineer, RSAMB, 4th Floor, Kisan Bhawan, Lal Kothi, Jaipur 3 15 EMD Required No ePBG Required No

chairs-office Chairs-office ( 77 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true N/A Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors With With, Without MATERIAL Type of Wood used in Polythene cane Chair teak wood solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leather foam knitted with cane, leather 1/5 foam, leather, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 15 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material wood MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M N/A Material of Fabric of Seat Cover leather foam black leatherite, leather foam, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 40 Kg/Cub.M N/A Thickness of Plywood used in Seat ±1(mm) 40 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 250 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material Padded Cushion Upholsted With Leather Leatherite On Metal CRCA pipe, wooden teak, virgin plastic, fiber, chrome mild steel, NA, polyprope lene, polyurethane, Poly propelene on metal, Polyurethane on metal, wooden, Padded Cushion Upholsted With Leather On Metal, Padded Cushion Upholsted With Leather Leatherite On Metal, Polyurethane padded on Plastic Thickness of Polyurethane Foam Used in Backrest IN 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm 2/5 MM (+/- 3 mm) Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type plastic N/A DIMENSION Size of Material (mm) 16 SWG 30 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 1050 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 550 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 500 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 380 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 550 mm 350 mm, 480 mm Backrest Height ±10(mm) 750 mm 300 mm, 350 mm, 700 mm, 430 mm Arm Length ±5(mm) 350 mm 200 mm, 250 mm, 300 mm, 490 mm Arm Width ±2(mm) 75 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black N/A Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated 3/5 on MS, N.A Colour of Paint black N/A CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO N/A ISI Marked false N/A Test reports to be furnished to buyer on demand NO YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ratan Lal Tater 342007, Executive Engineer, RSAMB, Division-II, Mandore mandi yard, Jodhpur 77 15 EMD Required No ePBG Required No

HAND TOWEL, BOROSIL GLASS, WALL CLOCK, CALLING BELL, FIRE EXTINGUSER, FOOT MAT, SERVING TRAY, PLASTIC DUST BIN SMALL, TEA COASTER, TEA CUP, WHITE BOARD, STANDING FAN, MOBILE STAND, CRYSTAL GLASS, PAD LOCK, PAD LOCK SMALL, PAPER SHREDDER 10 SHEET, ... BACK EXECUTIVE CHAIR , ... HEATER, EXECUTIVE CHAIR , ...

Sofa (V3) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Chair for General Purpose (Q2) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

High end Office Table/Desk Furniture Set/Suit (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5888297 Dated : 03-02-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 240000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Revolving Chair Size 19 point 3 x 13 point 6 inch with arms, Milton Water bottle 1 Ltr, Plastic Dust Bin 20 Ltrs, Table Cloth Size 4x4 Feet Colour Green, Pen Stand Leather for Officer, Calculator 12 digit Medium

Revolving Chair (V4) (Q2), Desk and Bench Set for Classroom/Training Area (Q2), Cafeteria Chair (Q2), Almirah, Book Shelves, Stainless Steel Dining Table, Bed, Wooden Four Seater Dinning Table with Cushion Chairs, Dining Table Chairs, Dressing Table, Shoe Rack

Camonet 80 feet x 60 feet, Red Cushion Chair, Office Table, Office Bag, Window AC 1 and half ton 5 star, Invertor 1 and half KVA

Ski, Ski Skin, Ski Pole, Ski Boots, Ski Helmet, Hand Gloves, Show Board, Groomer, Ski Lift, Stretchers, Office Chair and Steel Table BOQ Title BOQ BID

Computer Table, Chair, Office Table, Office Chair, Reception Sofa with Table, Samsung Freezer, CCTV Camera, Generator, Transportation, Show Rack, Sound System, Induction, Vaccum Cleaner, Plywood Wooden Bed, Mattress, Machine Oil, Coffee, Air Conditioner, Geaser, RO, Water Cooler, Tray, Television, waiting Chair, Desktop Computer, Podium, Wooden Almira, sofa, bamboo sofa, White Board, Dustbin, Plastic Drum, Doormate, Extingusher, Biometrics, Locker, Tea cup, Plate, Door Bell, Torch, Maniquines, Flood light, Hanger Display Stand, Electric Tap, Firsr add box, Hanger Round BOQ Title BOQ HANGER

Revolving Chair ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type Advance Bio Synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/5 Back type height adjustable push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type sliding fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 1140 * Backrest Height ±15mm 600 * Backrest Width ±10mm 480 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO YES YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Swaroop Khatik 335701, Executive Engineer, RSAMB, Shop No. 95, First Floor, New Dhan Mandi, Anoopgarh 15 15

Sofas ( PAC Only ), Executive Table ( PAC Only ), Dressing Table ( PAC Only ), Metal Beds ( PAC Only ), Chairs- Office- IS 3499 ( PAC Only ), Foam Mattress ( PAC Only ), Centre Table ( PAC Only ), Restaurant Chair ( PAC Only ), Restaurant Table ( PAC Only ), pillows- synthetic ( PAC Only )

revolving chair Revolving Chair ( 13 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic knee tilt synchronic Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest symmetrical lumber support Arm Type Adjustable Adjustable Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true Back type fixed fixed Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false 1/4 Seat type fixed fixed Seat is curved true * Locking mechanism true * Type of locking 4-Position Locking * Number of arm movement 2(up & down) 2(up & down) Lumber support external & fixed external & fixed MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene Proypylene seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover Density of PU foam used in seat KG per Cu Meter (+/- 3) 32 * 2/4 Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 * Material of Fabric Back Cover Leatherite Leatherite Material of Fabric of Seat Cover leatherite leatherite GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 1050 * Backrest Height ±15mm 500 500.0 Backrest Width ±10mm 550 550.0 Seat Height ±15 mm 500 500 Seat Width ±10 mm 550 550 Seat Depth ±10 mm 460 460.0 Thickness of M S Plate Joining the under structure with Seat 0.3 0.3 Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A N.A Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A N.A WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered YES YES 3/4 product is ISO 9001:2015 certified OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jitendra Soni 302017, North Western Railway Head Quarters, Near Jawahar Circle, Jagatpura, Jaipur-17 13 15

Portable ECG Machine 12 channel, BP App, Pulse Oximeter, Thermometer, Patient Revolving Chair, Medicine Container, Dressing Tray, X Ray View box, Dressing Drum 3 to 5 ltr, Hight Measurement Scale Roll Ruler, Stadiometer, Alcohol Tester, Soft Foldable Stretcher Bag Carry, SAM Splint

Sofa (V3) (Q2), Computer Table (V3) (Q2), Revolving Chair (V5) (Q2), Steel Almirah/Cabinets (V4) (Q2), Steel Bookcases conforming to IS 7761 (V2) (Q2), Modular Table Meeting Table/Centre Table (V2) (Q2), Classroom Stools (Q2), Dry Erase Writing Boards (V3) (Q3) (3 (3 ))

Office Chair (V3) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/5875973 Dated : 21-02-2025 Bid Document 1/11 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 16632 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 4 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : SITE DIRECTOR, NPCIL, RR SITE Nuclear Power Corporation of India Ltd. Rawatbhata Rajasthan Site P.O. – Anushakti, Via – Kota, Rajasthan – 323303 (Site Director) Reserved for Make In India products Reserved for Make In India products Yes MSE Purchase Preference MSE Purchase Preference Yes 2/11 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Sunmica Top Wooden Table Size 10 Feet 8 Inch x 2 Feet x 2 Feet 9 Inch, Sunmica Top Wooden Table Size 7 Feet x 2 Feet 8 Inch x 2 Feet 9 Inch, Office Table Size 6 Feet 6 Inch x 4 Feet x 2 Feet 6 Inch, Office Table Size 6 Feet x 3 Feet 6 Inch x 2 Feet 6 Inch

Marbal Stone Unit Prashasti Patra, Ice Box 20 Ltr, Trophy Base, Insect Killer, Revolving Chair, Bed Sheet with Pillow Color, Table Glass, Notice Board 3 x 4, Chappal, stabilizer, ACP Board with vinyl printing with lamination 7X4, ACP Board with vinyl printing with lamination 16X3

Table Cloth 7 ft x 4 Pt 5 ft with ASC Crest, Floor Mat 19 Pt 5 ft x 17 ft, Revolving Chair, Food Warmer 20 Ltr 4 Container, Table Glass 5 ft x 4 ft, Lancer Set Steel Rod with 01 x additional Flag

Tea Pot Electric, Table cloth, Hot Case, Logitech mk-220 wireless key board, Pad lock 40 mm, Scissor bid, paper shredder, Computer table, Computer chair, Sliding table, 625 VA UPS, Wall clock, Low back plastic chair, Senator table plastic, Executive ... Executive revolving chair ,

HDMI Cable, Coffee Mug, LED TCL 43 Inch, TV Stand, TATA Sky with Set up Box Stand, Calendar Frame, Distal Water, Name Plate, Office Table with marble top, Table Top

Mattress Single Bed, Plywood Brown Sheet, HD Camera, 8 Port Switch, Cable Cat 6, Connector, Office Table, Work Station Table, UV and Water Purifier, Digital Signature Certificate Token, Brosil Glass

Executive Cap Stand with Mirror 7ft x 3 pt 5ft, Teak Wooden Executive Table 48 Inch Round Shape, Teak Wooden Handicraft Hand Carved Chair with cushion fitted, Teak wooden Rectangular Table 36 Inch x 21 Inch x 30 Inch, Teak Wooden Handicraft Hand Carved Chair

Newspaper Reading Stand (Q3), Newspaper and Magazine Stand (Q3), Fabric Pin Up Notice Boards (Q4), Executive Computer Table (Q3), Executive Table (Q3), Centre Table (Q3), Wooden Podium (Q3), Dry Erase Writing Boards-IS 12406 (Q3), Projector Screen (Q3), Wooden Book Case (Q3), Classroom Stools (Q3)

HIGH BACK EXECUTIVE CHAIR FOR HOD, TABLE FOR HOD, OFFICERS TABLE, OFFICERS CHAIR, TABLE FOR OTHER STAFFS, CHAIR OTHER STAFFS, VISITORS CHAIR FOR HOD ROOM, VISITORS CHAIR MIDBACK CHAIR OF HEIGHT, CONFERENCE ROOM TABLE, CONFERENCE ROOM CHAIR FOR HOD, CONFERENCE ROOM CHAIR FOR OTHERS, CABINET

BANNED MOBILE AND APPS BD 4FT X 3FTWITH STAND, WALL FAN AMONARD, DUROSOFT ROLL, DUROTURF ROLL, COMPUTER TABLE 3 5 FT X 2 FT, OFFICE TABLE 4FT X 2FT, STOOL CHAIR

Office Table, Kaps Voilin with Pikup, Hawk Cable Male Female, Yamha Vocal Dai Manic Mic DM 105, Trolley Bag, Water Dispenser with Bottle, Bedsheet with Pillow Cover, Curtain for Dy Comdt

Blazer Cloth 6x4 with Border, Office Chair revolving type, Plastic Table 4ft x 2ft, Tower AC 2 Ton, AC 2 ton Splite, Food warmer with 4 container 10kg each type ss

Lockers- IS 5244 (Q3), medical stools or chairs (Q3), Public Place Seating Chair (Q3), Counter Chair (Bar/Pub) (Q3), Metal Shelving Racks-IS:1883 (Q3), Chairs-Office- IS 3499 (Q3), Revolving Chair (Q3), Platform Trolley (Q3), Almirah Steel-IS:3312 (Q3), Steel Tables-IS: 8126 (Q3)

Sofa Set for Waiting Room, Wall Fan for Main Office, Water Dispenser for Main Office, Quilt for Duty Room, Bed Sheets for Duty Room, Pillow with Cover for Duty Room, Revolving Chair for Office, Stone Cabinet for Storage of online UPS, Biometric Lock enabled safety locker

Single/Double Bed - Wooden - With/Without Box (Q3) ( PAC Only ), Foam Mattress (V2) (Q2) ( PAC Only ), Bed Side Table (Q3) ( PAC Only ), Steel Tables as per IS 8126 (Q3) ( PAC Only ), Revolving Chair (V4) (Q2) ( PAC Only ), Sofas (V2) (Q3) ( PAC Only ), Centre Table (Q3) ( PAC Only )

chairs-office Chairs-office ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type Without Arms Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite leatherite Thickness of Plywood used in 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 1/4 Backrest IN MM (±1 mm) 30 mm, 35 mm, 40 mm, N.A Frame Material chrome on MS chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of Seat Cover fabric fabric Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 30 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material NA As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type PVC - DIMENSION Size of Material (mm) 16 gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 890 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 500 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 2/4 550 mm, 650 mm Seat Height IN MM ±5(mm) 500 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 500 mm 350 mm, 480 mm Backrest Height ±10(mm) 300 mm As per GeM Catalogue. Arm Length ±5(mm) N.A 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) N.A 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest blue - Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint white - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand NO YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 3/4 1 Narendra Kumar Rai 313332, Deogarh Road Amet 50 15

chairs-office Chairs-office ( 21 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type Without Arms Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever Castors Without Without MATERIAL Type of Wood used in Polythene cane Chair hot pressed board solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite knitted with cane, leather foam, leather, leatherite, polyster, N.A 1/4 Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material chrome on MS chrome on MS, CRCA ERW round pipe Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M - Material of Fabric of Seat Cover black leatherite black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material NA As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 25 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type Polypropylene - DIMENSION Size of Material (mm) 16 SWG 30 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 800 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 430 mm 350 mm, 400 mm, 430 mm, 450 mm, 2/4 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 400 mm 350 mm, 380 mm, 470 mm, 500 mm, 650 mm Seat Height IN MM ±5(mm) 460 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 430 mm 350 mm, 480 mm Backrest Height ±10(mm) 350 mm As per GeM Catalogue. Arm Length ±5(mm) N.A 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) N.A 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type chrome chrome Colour of Paint NA - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 21 15

chairs-office Chairs-office ( 70 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms Type of Seat and Backrest Made of Polythene cane Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover N.A knitted with cane, leather foam, leather 1/5, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) N.A 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material CRCA ERW round pipe MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 35 Kg/Cub.M - Material of Fabric of Seat Cover fabric black leatherite, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) N.A - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material polypropelene As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) N.A 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber - DIMENSION Size of Material (mm) 16 SWG 30 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/5 Chair Height ±15(mm) 850 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 550 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 430 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 450 mm As per GeM Catalogue. Arm Length ±5(mm) 350 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 50 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO 3/5 OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chand Soni 303108, Near Bus Stand KOTPUTLI 70 15