Office Furniture Tenders in Telangana

Supply of office furniture Featherlite make for Executive Engineer, Housing Division-II, New office at 1st floor, GHMC complex, Hari Hara Kala Bhavan, Secunderabad

Supply of office furniture for FA Section in Zonal office building, Circle-17, KZ, GHMC (Amount of Estimate Rs.7.60 Lakhs) (Item No.01)

Supplying of office furniture to Audit Section and Engineering section at Rajendranagar Circle office in Rajendranagar Circle-11,GHMC (Rs. 0.998 Lakhs)(Re call)

Repairs to Office chairs and painting of Almirah's, file cabinets, Book Shelves and Racks etc. for various mines and departments of RG.1 area for a period of One year

Repairs to Office Chairs and Painting of Almirahs, File Cabinets, Book Shelves, Rocks etc. Required for Various Mines and Departments of RG-I Area for a Period of One Year

Repairs to Office chairs and painting of Almirahs, File cabinets, Book Shelves and Racks etc. for various mines and departments of RG.1 Area for a period of One year

Supply, Delivery and Fixing of UPVC Doors, Window Curtains, Office Chair, Almara Etc in Municipal office under Municipal General Funds 2024-25

Increase in Seating Capacity by Providing linear cabins and office chairs at Insurance Regulatory and Development Authority of India (IRDAI), Financial District, Nanakramguda, Gachibowli, Hyderabad. Subwork/Packages: Providing and Fixing of Manager Cabin Tables & PLB Low Storages.

Supply, delivery and fixing of high back, medium back executive revolving chairs, plain Office storage almarahs, new fabric roller blinds, sun control film at various Offices of front and rear administrative building blocks under building and vehicle maintenance Sub Division in UFW Division

KTPS-V&VI Stages-Civil-Interior works like conference table, wall paneling, gypsum ceiling, wooden cladding including meeting table, cupboards etc., for CE/O&M Chamber and proposed conference room at +17m floor of service building of KTPS-VI Stage.

Repairs to Office chairs and painting of Almirahs, File Cabinets, Book Shelves and Racks etc., required for various mines and departments of RG.1 Area for a period of One year

Providing of Bollards at Zonal office building and miscellaneous other works (Motor Repairs, Toilet Repairs, office furniture etc.) Circle-17, KZ, GHMC (Item No.02)

Supply and installation of Office Furniture, and Beautification of Conference Room, Chairman Chamber & Commissioner Chamber at Shamshabad Municipality Under Municipal General Funds / Any other Funds.

Supply, Delivery and Repairs of Office Furniture for various Sections in Zonal Office Building of Serilingampally Circle-20, SLP Zone, GHMC(Item-08)(2nd call)

Supply and Purchasing of office furniture and Electrical Equipment at AE Quarters building at court reserviour in MCK est cost ofRs. 4.90 Lakhs under MGF

Providing office furniture, repairs to the toilet and painting to the TGHME Union office at Ground Floor, GHMC Head Office under EE D 14, GHMC.

Non-Revolving and Non-Tilting Chair with Armrest, Modular Workstation Table

revolving chair Revolving Chair ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt, push back, knee tilt synchronic, central tilt synchronic, only revolving without tilting mechanism, 360 Degree swivel, posture control with multilocking position synchronized mechanism, Bio Synchronic, Advance Bio Synchronic, Auto return mechanism, Forward Tilt Mechanism, Forward tilt synchronic mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) N.A up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across 1/6 back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A - Ergonomic Seat Design true Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest true Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die 2/6 Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material WITHOUT ARM steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 32 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with 3/6 Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1125 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 730 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 720 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 520 420, 450, 520 Seat Width ±10 mm 480 440, 4 60 Seat Depth ±10 mm 480 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 2 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 Thickness of Polyurethane Foam Used in Backrest IN N.A 25 mm, 120 4/6 MM (+/- 2 MM) WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhikshapathy Kawati 500058, DRDL, KANCHANBAGH P.O. 5 30 EMD Required No ePBG Required No

TUBULAR OFFICE CHAIR (CANTILEVER MODEL) CHAIRS WITH SEAT D X W X H 500MM, 400MM, 500MM 460 PADDED WITH POLYURETHANE FOAM. OR SIMILAR

TUBULAR OFFICE CHAIR (CANTILEVER MODEL) CHAIRS WITH SEAT D X W X H 500MM, 470MM, 460MM 460 PADDED WITH POLYURETHANE FOAM OR SIMILAR

Reception table, Centre table, Low Height Storage, Security Table and Pedestal, Security Chair, Magazine Rack, VIP-1, 3-Seater Sofa, VIP-1, 2-Seater Sofa, VIP-1, Single seater Sofa, VIP-1, Side table, Serving Table, VIP-2, 3- Seater Sofa, VIP-2, ... chair, Conference Table , ...

Providing of Powder Coated Aluminium Partitions Modular Workstations Furniture and SS Railing for staircase at newly constructing Yadadri Bhongir Circle office building with provision of SE Office SAO Office DE MRT TRE office Construction and Civil wing Meeting hall at 33 11 KV Substation Bhongir Town in Bhongir of Yadadri Bhongir Circle(RESERVED FOR ST CATEGORY)

NON REVOVLING AND NON -TILTING CHAIR WITH ARMREST (THRIVE VISITOR CHAIR) (Q3), EXECUTIVE TABLE OF THREE LAYER PRELAMINATED PARTICLE BOARD(WOOD PRODUCT) OF GRADE II TYPE II OF IS12 (Q3), REVOLVING CHAIR WITH ARM KNEE TILT SYNCHRONIC MECHANISM (Q3)

Clothes Lockers - Steel ( PAC Only ), Almirah Steel ( PAC Only ), Steel Tables ( PAC Only ), Steel Filing Cabinets ( PAC Only )

Steel Bookcases as per IS 7761 (Q3), Steel Filing Cabinets (Q3), Modular Metal Drawer File Cabinet Pedestal (Q3)

chairs-office ( PAC Only ), revolving chair ( PAC Only ), revolving chair ( PAC Only ) Experience with Gov. Required 5 Year (s)

revolving chair Revolving Chair ( 38 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic central tilt, push back, knee tilt synchronic, central tilt synchronic, only revolving without tilting mechanism, 360 Degree swivel, posture control with multilocking position synchronized mechanism, Bio Synchronic, Advance Bio Synchronic, Auto return mechanism, Forward Tilt Mechanism, Forward tilt synchronic mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across 1/6 back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A - Ergonomic Seat Design true Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die 2/6 Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Steel covered with polypropelene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover Innner frame Upholstered with Mesh mesh fabric, Innner frame Upholstered with 3/6 fabric and mounted on main assembly Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1025 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 730 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 500 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 420 420, 450, 520 Seat Width ±10 mm 500 440, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.5 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 Thickness of Polyurethane Foam Used in Backrest IN N.A 25 mm, 120 4/6 MM (+/- 2 MM) WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhikshapathy Kawati 500058, DRDL, KANCHANBAGH P.O. 38 30 EMD Required No ePBG Required No

M/S S U V FURNITURES--M/S S U V FURNITURES Mid-back Revolving, M/S S U V FURNITURES--M/S S U V FURNITURES Mid-back Revolving Chair of Adjustable height with Wheels

chairs-office, Classroom Tables, Revolving Chair, Meeting Table, Centre Table, Almirah Steel, Executive Table, Restaurant Table, Plastic Moulded Chair, Steel Tables, Public Place Seating Chair Average Turnover (Last 3 Years) 13 Lakh (s) Experience with Government Required 3 Year (s)

Executive Computer Table (Q3), Revolving Chair (Q3)

CG91-100-00414, CG91-100-00559, CG91-100-00975, CG91-100-00540, CG91-100-00542, CG91-100-00606, CG91-100-00976

Computer table, Motion High Back Seat Adjustable Armrests, Classroom chair with desckletandarms, Main Table, Visitor chair

DRESSING MIRROR WALL MOUNTED 40 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, VERANDAH CHAIR 40 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, HARD BED SINGLE WOODEN 40 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, RACK STEEL 50 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, WOODEN STOOL 50 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, CHARPOY IP WITH HARD TOP AND MNF SET 50 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, TABLE WITHOUT DRAWER 50 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS, LOCKER BED SIDE 50 ORS WORK ALL COMPLETE AS DIRECTED BY ENGINEER IN CHARGE AND AS PER GIVEN SPECIFICATIONS IN ATC OF BID DOCUMENTS Bid Number ( ) : GEM/2025/B/6160723 Dated : 22-04-2025 Bid Document 1/19

CG91-100-00314, CG91-100-00977, CG91-100-00978, CG91-100-00309, CG91-100-00055, CG91-100-00056, CG91-100-00067, CG91-100-00174, CG91-100-00134, CG91-100-00044

Notice Board, Computer table Work benches, white Board, Revolving chair with adusable height and back support, Revolving chair with out arm

Balance work of procurement, supply and delivery of office furniture for the designated ward level officers and water dispensers for all wards in Circle-29,Secunderabad, SBZ,GHMC.

Chairs-Office- IS 3499 (Q3), Revolving Chair (Q3)

Meeting Table (V2) (Q3), Revolving Chair (V3) (Q2)

Steel Table, Revolving Chair with Arm Push Back

Metal Beds ( PAC Only ), Revolving Chair ( PAC Only )

chairs-office ( PAC Only ), Revolving Chair ( PAC Only )

chairs-office ( PAC Only ), Revolving Chair ( PAC Only )

REVOLVING COMPUTER CHAIR (Q3), EXECUTIVE REVOLVING CHAIR (Q3)

Metal Shelving Racks (Adjustable Type) confirming to IS 1883 (V2) (Q2), Office Chair (V3) (Q2), Revolving Chair (V4) (Q2) (3 (3 ) ) Minimum Average Annual Turnover of the bidder (For 3 Years) 44 Lakh (s) ( ( 3 3 ))

storage cum filing cabinet Storage Cum Filing Cabinet ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Construction Almirah having two hinged doors on top and Drawers at the bottom Almirah having two hinged doors on top and Drawers at the bottom Number of Adjustable Shelves in top part of almirah (Nos) 4 0, 1, 2, 3, 4 No of File Storage Drawers at the bottom 4 1, 4 Sliding Mechanism for Drawers Ball bearing Ball slides, Ball bearing, Solid roller, Ball bearing roller, Telescopic Slide Type of Locking (Doors and Drawers) Central locking Central locking, Individual Locking, Individual locking for each drawer and Almirah, One lock for Drawers and One lock for Almirah Delivery Condition of Sliding Door Storage Unit Knock Down supply to be assembled by Seller at Consignee Site Knock Down supply to be assembled by Seller at Consignee Site, Knock Down Supply to 1/5 be assembled by consignee at site, Fixed Pre-Assembeled Unit MATERIAL Material M S Sheet M S Sheet, Laminated MDF Board with balancing lamination on the back side, Prelaminated Particle Board both side laminated, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Teak carved wood, Other wood Thickness of Top Pannel (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 0.7 mm thickness of MS sheet, 0.8 mm thickness of MS sheet, 20 ± 2 mm thickness of MDF/Particle board, 19mm thick Commercial Block Board BWP grade, 19mm thick Decorative Block Board BWP grade, 19mm thick Commercial Block Board MR Grade, 19mm thick Decorative Block Board MR Grade Thickness of Bottom Pannel (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 2/5 19mm thick Decorative Block Board MR Grade Thickness of Back (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 20 ±2 mm thickness of MDF/Particle Board, 19mm thick Decorative Block Board MR Grade Thickness of side Pannels (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 19mm thick Decorative Block Board MR Grade Thickness of Shelves Pannels (mm) 0.7 mm thickness of MS sheet 0.5 mm thickness of MS Sheet, 0.6 mm thickness of MS Sheet, 15 ±2 mm thickness of MDF/Particle Board, 19mm thick Decorative Block Board MR Grade Thickness of door Pannel (mm) 0.8 mm thickness of MS Sheet 0.6 mm thickness of MS sheet, 0.7 mm 3/5 thickness of MS sheet, 19mm thick Decorative Block Board MR Grade DIMENSION Overall Width ±5(mm) 900 - Overall Depth ±5(mm) 450 - Overall Height ±10(mm) 1830 1830, 2115 Working Width of Drawer ±50(mm) 850 - Working Height of Drawer ±3(mm) 345 - Working Depth of Drawer ±5(mm) 285 - COLOUR & FINISH Paint Powder Coating Powder Coating, Ennamel Paint, Mica Finish, Polish, Melamine Polish, Teak finish/polish Colour of MDF Prelaminated Particle Board As per buyer's choice - Colour of Paint As per buyer's choice - WARRANTY Warranty Period in number of years 1 1, 4, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Doddi J K Chakravarthy 500058, DMRL, P. O Kanchanbagh, Hyderabad 4 25

Supply of office table, Chairs, re-moderate the flooring and minor repairs to the Zonal Commissioner's office Building, Secunderabad Zone in Begumpet Circle-30, Secunderabad Zone, GHMC.

Aluminum Office Cupboard, L-Shape Office Table, Office Table

PH&MED- TGRERA- Providing office furniture & other Items for accommodation of office of the Real Estate Regulatory Authority in the 2nd floor of DTCP Office Complex, AC Guards, Hyderabad

ALMARAIH (SMALL) MAKE: GODREJ, ALMARAIH (BIG) MAKE: GODREJ, 4 DRAWER FILING CABINET WITH SINGLE LOCK, STEEL ALMIRAH DOUBLE DOORS (GLASS DOORS)

WORK SURFACE SYSTEM-1 2350 X 2350 X 750, WORK SURFACE SYSTEM-2 1800 X 2100 X 750, DOCUMENT STORAGE CABINET TYPE-1 1800 X 500 X 750, DOCUMENT STORAGE CABINET TYPE-2 2350 X 500 X 1800, WORK SUPPORT SYSTEM TYPE-1 47CM W X 48CM D X 76.4CM H, WORK SUPPORT SYSTEM TYPE-2 51CM W X 48CM D X 64.5CM H, WORK SURFACE SYSTEM TYPE-3 1350 X 600 X 750