Office Furniture Tenders in Telangana

Modular Work Stations (V3) (Q2), Executive Table (V4) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2) (3 (3 ))

Executive Table (V3) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6613087 Dated : 28-08-2025 Bid Document 1/7 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Customised Linear workstation, Customised Cubical Shaped, Customised L Shaped Workstation, Customised L Shaped Executive Office Table, Customised U Shaped Executive Office Table with additional work moveable table

revolving chair MSME Exemption For Years Of Experience And Turnover No Revolving Chair ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment false * Height Adjustment ± 5(mm) up to 90 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * 1/5 Ergonomic Seat Design false true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism false * Type of locking N.A * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm 2/5 Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite 3/5, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 860 * Backrest Height ±15mm 430 * Backrest Width ±10mm 440 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 460 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.4 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 2-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO 4/5 OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shaik Abdul Nabisa 500071, Office of Chief Project Director 4 th Floor, Rail Nilyam Secunderabad-500071 1 15

revolving chair Average Turn Over of Last 3 Years 2 Lakh (s) Revolving Chair ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat true true, false 1/6 Design Back type push back push back, height adjustable backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden 2/6 Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material 19 mm (+/- 2 mm ) ROUND pipe with cushion steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * 3/6 DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 460 * Backrest Width ±10mm 520 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 520 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered YES YES, NO 4/6 product is ISO 18001:2007 certified Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 R Ramachandran 501218, IG APS-II CISF SW Bangalore(Camped at RGIA Hyderabad) PO&PS- Shamshabad Dist- Rangareddy PC-500108 20 15

revolving chair ( PAC Only ) Experience with Gov. Required 5 Year (s) MSME Exemption For Years Of Experience And Turnover Yes Revolving Chair ( 10 ) ( Under PAC ) Make godrejinterio Model godrejinterio Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type 360 Degree swivel, posture control with multilocking position synchronized mechanism, central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at 1/6 multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design false true, false Back type height adjustable push back, height adjustable backrest has separate adjustable headrest true true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism true * Type of locking 4-Position Locking * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium 2/6 Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 65 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 65 * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric 3/6, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, 100% polyester fabric, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * DIMENSION Overall Chair Height ±15mm 670 * Backrest Height ±15mm 600 * Backrest Width ±10mm 480 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 500 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year 4/6 CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 CONTRACTS AND MATERIAL MANAGE DIRECTOR 500069, RESEARCH CENTRE IMARAT, P O VIGNYANA KANCHA 10 15

revolving chair MSME Exemption For Years Of Experience And Turnover No Revolving Chair ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest brown * 1/5 Ergonomic Seat Design false true, false Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm 2/5 Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite 3/5, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 1220 * Backrest Height ±15mm 730 * Backrest Width ±10mm 500 * Seat Height ±15 mm 480 420, 450, 480, 500, 520 Seat Width ±10 mm 500 440, 520, 550, 460, 360 Seat Depth ±10 mm 500 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO YES YES, NO 4/5 9001:2015 certified OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shaik Abdul Nabisa 500071, Office of Chief Project Director 4 th Floor, Rail Nilyam Secunderabad-500071 1 15

Desktop Computers (Q2), Computer Printers (Q2), scanners (Q2), Line Intractive UPS with AVR (Q3), Computer Table (Q3), Revolving Chair (Q3)

Providing dismantling and refixing along with supply, delivery and laying of fabric cloth, hardware accessories and new 25 mm thickness MDF table tops to the existing Godrej make modular work station cabins repairs and replacement of various spares ... back revolving chairs at ...

Sofas ( PAC Only ), Centre Table ( PAC Only ), Executive Table ( PAC Only ), Credenzas ( PAC Only ), Almirah Steel- IS:3312 ( PAC Only )

Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V3) (Q2) ), Composite Office Tables confirming to IS 8126 (V2) (Q2) Chair (Q2) ( PAC Only )

Plastic Chairs For General Purposes conforming to IS 13713 (V3) (Q2), Revolving Chair (V5) (Q2), Writing Pad Chair (Q2) ( ( 3 3 ))

Modular Extendable Conference Table (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6475947 Dated : 04-08-2025 Bid Document 1/8 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 10 Bid Number : GEM/2025/B/6851534 Dated : 05-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Revolving Chair (V4) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Bid Number : GEM/2025/B/6301739 Dated : 11-06-2025 Bid Document 1/7 Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Restaurant Chair, Restaurant Table, Plastic Moulded Chair- IS 13713, Revolving Chair, Computer Table, Multimedia Projector (MMP), Domestic Refrigerators-IS 1476, Projector Screen

Supply, delivery and fixing of new medium, high back executive office revolving chairs, visitor chairs at O/o Director (Finance) wing, CGM(P and A)/STP-I, DCF, O/o DGM(E), EDP Wing and laying of rubber coir door mats, sun control film, office storage almarah at O/o CGM(P and A)/PCC-I, Estate wing and other accessories at front and rear admin. building blocks under building and vehicle maintenance Sub Division in UFW Division

Revolving Chair (V5) (Q2) ( PAC Only ) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC) *In case any ... category Revolving Chair (V5) ...

Revolving Chair (V4) (Q2) ( PAC Only ) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC) *In case any ... category Revolving Chair (V4) ...

Empanelment of Manufacturers / Cooperatives / Vendors / Suppliers at the Hyderabad Agricultural Co-operative Association (HACA) Ltd Hyderabad for supply of Printing Stationery Office Furniture Office Equipment Food grains Food commodities Edible oils Pulses, Rice Vehicles / Machinery / Agriculture Equipment etc different categories as per experience / turnovers they would be classified for future requirements

revolving chair Average Turn Over of Last 3 Years 1800 Lakh (s) Experience with Gov. Required 10 Year (s) Revolving Chair ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black, brown, maroon - Ergonomic Seat Design false Back type fixed push back, height 1/5 adjustable backrest has separate adjustable headrest true Seat type fixed fixed, sliding Seat is curved false - Locking mechanism false - Type of locking upright locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - 3/5 DIMENSION Overall Chair Height ±15mm 890 As per GeM Catalogue. Backrest Height ±15mm 730 As per GeM Catalogue. Backrest Width ±10mm 500 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 520 420, 450, 520 Seat Width ±10 mm 500 440, 550, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Aditya Mishra 500069, RESEARCH CENTRE IMARAT, P O VIGNYANA KANCHA 10 15 Required No ePBG Required No

Meeting Table (V2) (Q3), High end Office Table/Desk Furniture Set/Suit (Q3)

Procurement of office furniture to Circle-39 office, Ameerpet, Khairatabad Zone, GHMC (Item No.06)

Procurement of office furniture for new Circle Office of Madhapur Circle-50 ,Kukatpally zone,GHMC.

Supply and Delivery of Office Furniture i.e Tables, Chairs in Medak Municipality under 15thFCG/MGF

Modular Work Stations (V2) (Q3) ( PAC Only ), Office Chair (V3) (Q2) ( PAC Only )

Revolving Chair (V4) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6560477 Dated : 12-08-2025 Bid Document 1/8 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority DRDO Auto CRAC Days 45 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V4) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6642200 Dated : 04-09-2025 Bid Document 1/9 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority DRDO Auto CRAC Days 45 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V5) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6957735 Dated : 03-12-2025 Bid Document 1/7 Number of Auto Extension count 2 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

revolving chair ( PAC Only ) MSME Exemption For Years Of Experience And Turnover Yes Revolving Chair ( 30 ) ( Under PAC ) Make godrejinterio Model godrejmakeoxbomidbackchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber 1/6 Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type height adjustable push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism false * Type of locking N.A * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & adjustable integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish 2/6 With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Steel covered with polypropelene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin 3/6 elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 1140 * Backrest Height ±15mm 570 * Backrest Width ±10mm 440 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 70 * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 70 * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO 4/6 BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 CONTRACTS AND MATERIAL MANAGE DIRECTOR 500069, RESEARCH CENTRE IMARAT, P O VIGNYANA KANCHA 30 15

Chair (Without Wheels) for General Purpose (Q2), Sofa (V3) (Q2), Revolving Chair (V5) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2) (3 (3 ))

Steel Tables, Revolving Chair, Chairs-Office- IS 3499, Public Place Seating Chair, Almirah Steel-IS:3312, Wooden Lab Stools Experience Criteria 1 Year (s)

PLASTIC CHAIR (Q3), VISITOR CHAIR (Q3), REVOLVING HIGH BACK FABRIC CHAIR (Q3), OFFICE TABLE WITH DRAWER (Q3), OFFICE TABLE WITH DRAWER AND STORAGE UNIT (Q3), STEEL BOOK CASE/ALMIRAH (Q3), WOODEN BOOK CASE (Q3)

PLASTIC CHAIR (Q3), VISITOR CHAIR (Q3), REVOLVING HIGH BACK FABRIC CHAIR (Q3), OFFICE TABLE WITH DRAWER (Q3), OFFICE TABLE WITH DRAWER AND STORAGE UNIT (Q3), STEEL BOOK CASE/ALMIRAH (Q3), WOODEN BOOK CASE (Q3)

revolving chair Average Turn Over of Last 3 Years 14 Lakh (s) Experience with Gov. Required 10 Year (s) Revolving Chair ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic As per GeM Catalogue. Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height 1/5 adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 890 As per GeM Catalogue. Backrest Height ±15mm 460 As per GeM Catalogue. Backrest Width ±10mm 500 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 420 420, 450, 520 Seat Width ±10 mm 500 440, 550, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.5 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 750 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO 4/5 OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Aditya Mishra 500069, RESEARCH CENTRE IMARAT, P O VIGNYANA KANCHA 25 45

OFFICE CHAIR, DINING TABLE, DINING CHAIR, GREEN NET, ACRYLIC BOARD, AUTOMATIC SHOES POLISH MACHINE

Conference Table 15 Seater hyderbad rci location as per specifications in the ATC documents and all complete as directed by the Engineer in chrage, Conference Table 25 Seater hyderbad rci location as per specifications in the ATC documents and all ... chrage, Office Table as ... chrage, Revolving Chair LRDE ...

Procurement of Office Systems, Printers, Scanners and Office Furniture for various offices of Kukatpally Zone, CMC Recall

Procurement of office furniture for new Circle Office of Allwyn Colony-Circle-51 in Kukatpally Zone, GHMC.

Modular Work Stations (V3) (Q2), Revolving Chair (V5) (Q2), Chair (Without Wheels) for General Purpose (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2) (3 (3 ))

Pedestal Fan Make Crompton, Godrej Interio Almirah Steel with 4 Shelves, A4 Spiral Binding machine, Godrej Interio Revolving Chair, Computer Speaker, Paper Shredding Machine, Extension Board

Professional Large Format Display Size 247 cm (Q3), Point to point non upgradable video conferencing system (Q3), Angular Revolving Chair with ARM 360 Degree swivel (Q3)

Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V4) (Q3), Revolving Chair (V5) (Q2), Chair (Without Wheels) for General Purpose (Q2), Computer Table (V2) (Q2)

Dining Tables - Handcrafted (Q3), Single/Double Bed - Wooden - With/Without Box (Q3), Wooden Almirah (Q3), Executive Table (V2) (Q3), Chair Office (V2) (Q3), Centre Table (Q3)

Revolving Chair (V5) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6843135 Dated : 31-10-2025 Bid Document 1/7 Number of Auto Extension count 3 Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Payment Timelines Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

CRFQ No: 1000396379, Tender Due Date: 08.12.2022 @15:00 Hrs.

Conference Table, Foldable Table, Side Table, Conference Chair, Single Seater Sofa, HDMI Matrix Switcher 8 x 8, Gooseneck mic, Collar Mic, Cordless Mic, Mixer 32 Channel, Mic Cable, Aux to Mono Cable

Repair of 5 seater sofa set, Repair of conference revolving chair with forward tilt mechanism, Repair of single seater sofa set, Repair of sofa set three seater

Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V3) (Q2) ( PAC Only ), Revolving Chair (V4) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover

Chair for General Purpose (Q2), Revolving Chair (V5) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No