PPE & Safety Equipment Tenders in Karnataka

SITC of 2 x 500kVA substation and 250kVA DG set i/c of laying of HT/LT cables and Providing of IEI, LED Fitting & fans, Flood lights and Providing of safety equipments in substation area and construction of G.I roof shed, strom water drain & cable trench etc at CRPF Torali Belagavi, Karnataka SH: Providing services of Computer Operator, Office Assistant for Office assistance at O/o The EE(E), CPWD, Mysuru.

SAFETY CABINET FOR FRAILJ WOODEN (12" X48" X12" ) ( 1 the number pi ), SAFETY EQUIPMENT CABINET WOODEN (72" X30" X12" ) ( 2 the number pi )

thermal gloves, Surgical isolation Faceshield, Industrial and Protective Rubber Knee and Ankle Boots- as per IS: 5557, Safety Equipment Tool Kit for Labours

PROVIDING ONLINE CONTINUOUS EFFLUENT QUALITY MONITORING SYSTEM, PROVIDING PROTECTION WORKS, INSTALLATION OF BULK FLOW METER, INSTALLATION OF CCTV, SUPPLYING AND FIXING OF FIRE FIGHTING EQUIPMENTS, PPE KIT, TOOL KIT AND INSTALLATION OF NEW POISONOUS GAS DETECTION SYSTEM FOR 250 KLD SBR TYPE STP IN K R NAGARA TOWN UNDER JAL HI AMRIT (JHA) INITIATIVE UNDER AMRUT 2.0.

Industrial Safety Gloves - Leather and Cotton (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number ( ) : GEM/2024/B/5433807 Dated : 24-09-2024 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 20000 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : HAL LCA Tejas For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, LCA TEJAS DIVISION. ACCOUNT NO: 39187604397 IFSC CODE: SBIN0001114 BANK NAME: STATE BANK OF INDIA, HAL BRANCH. (Hal Lca Tejas) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of 2/6 quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

ISCAR Carbide Tips TPKR 43 PDTR HS 2204 IC 328, Tig Welding Helmet, Safety Googles MK 1706, Lixing lithium Battery Coin Cell, GLOVES PIKA - as per sample, GLOVES Leather - as per sample, Safety Goggles, Neutral Eye Glasses scratch proof, Emery Cloth Medium as per sample

UNIVERSAL NOZZLE GUNMETAL, SIZE 63MM, FOG NOZZLE GUNMETAL, 63MM, RAT 7KG CM2, DIAPHRAGM, DELUGE VALVE RUBBER, 460MM, SUPPLY OF PRESSURE SWITCH 06 KG, ACTUATOR, VALVE, BALL, 1 2IN, VLV, SOL, NORGREN SINGLE PILOT, 5 2, SPLY OF NRV SIZE 1.1 2IN, BRASS, ... LEVEL:135DBA, SAFETY SHOES , ... SHOES, SAFETY HELMET , ... SHIELD, SAFETY HELMET , ... REUSABLE, GUM BOOTS , ... BLACK, GUM BOOTS , ... BLACK, GUM BOOTS , ... BLACK, GUM BOOTS , ...

provide soft starter for the 90 HP backwash stand by pump installed at Kembalu water purification unit of the Kabini Water Project of MCC and electrical wiring for the newly constructed filter bed and lighting system and to test and control the ... provide safety equipment and ...

RETRACTABLE BLOCK POLYMER CASING WITH SS WIRE ROPE, AS PER TENDER SPECIFICATION, SAFETY HARNESS BELT FULL BODY ISI FOR TERMINAL, AS PER TENDER SPECIFICATION, SS WHEEL TROLLEY FOR FALL ARRESTER ITEMS, AS PER TENDER SPECIFICATION, HORIZONTAL LIFE LINE UPTO 15 MTS WITH INSTALLATION, AS PER TENDER SPECIFICATION

Pitambri, Garbage Bag Medium, Garbage Bag 1 Roll, Safety Helmet, TP Roll 210 MM, 2 in TP Roll, Baygon Spray, Exo Soap, Harpic, Black Leather File, File, NCML, Green paper, Himalaya Napkin, Paper Bag, Dranex, Ajanta Clock, Chipping Hammer, Safety Google, Scissors Small, Araldite, Heatx, Box Plastic, Big Box Plastic, Pipe

Squeegee Washer Wiper Mopper (Version 2.0) (Q4), Nutrient Supplement for Soil Fertility and Soil Health (Sericulture use only) (Q4), Industrial Safety Gloves- Leather and Cotton (Q3), Industrial and Protective Rubber Knee and Ankle Boots- as per IS: 5557 (Q3), Kitchen Chimney (Q3)

Biomedical Waste Management Service - weight basis - Collection, Lifting, Transportation, Treatment, Disposal, Documentation and Reporting, Storage and Handling; National Tuberculosis Institute(Laboratory), Bangalore; Face Mask, Gloves, Apron, PPE ki..

High Pressure Fire Fighting Hose with Delivery Couplings as per IS 14933 (Q2), Triple Purpose Nozzle-IS:2871 (Q3), Indusrial Safety Helmet (Png)-IS 2925 (Q3), butterfly valve - as per IS 13095 (Q3), Industrial and Protective Rubber Knee and Ankle Boots- as per IS: 5557 (Q3), Safety Footwear - Bis Specification-IS:15298 Part 2 (Q3)

Biomedical Waste Management Service - weight basis - Collection, Transportation, Disposal, Treatment; Primary Health Centres; Polycarbonate Jars, White puncture proof containers, Needle Cutters, Gum Boot, Face Mask, Gloves, Apron, PPE kits, Goggles, ..

Bio Medical Waste Management Service - Per bed basis - Collection, Lifting, Transportation, Treatment, Disposal; Primary Health Centres; White puncture proof containers, Face Mask, Gloves, Apron, PPE kits, Injections & needles, Syringes, Scalpels, Br..

Biomedical Waste Management Service - weight basis - Collection, Lifting, Transportation, Treatment, Disposal, Documentation and Reporting; Primary Health Centres; Needle Cutters, Manual Hub Cutter, Gum Boot, Face Mask, Gloves, Apron, PPE kits, Goggl..

T V 55 INCH, Office Table, Digital Wall Clock, Torch, POLE MTD, Epiostomy Tray Set, GUM BOOTS, Refrigator 322 LITRE LG, SLIPPERS, PLASTIC TRAY M, Fridge Thermometer, RADIUM CUTTER, Torch MEDIUM, Torch SMALL, Digital B P Machine, FOGGER MACHINE, I V STAND, SUTURE REMOVING SCISOR, ELBOW LENGTH GLOVS, DOMESTIC GLOVES, BED SIDE LOCKER S S, PATIENT EXAMINATION TABLE, MATTRESS FOR EXAM TABLE, DOUBLE FOOT STEP S S, BED SIDE SCREEN WITH CURTAIN S S, DRESSING TROLLY S S, ANIMAL DUST BIN

Safety Footwear - Bis Specification-IS:15298 Part 2 (Q3), Rain Coat-IS:4761 (Q4), Industrial Safety Belts and Harnesses- as per IS: 3521 (Q3), Life-Buoys or Life rings as per IS 5326 (Q3), Industrial and Protective Rubber Knee and Ankle Boots- as per ... Indusrial Safety Helmet (Png)-IS

Industrial Safety Helmet (V2) as per IS 2925 (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/5834291 Dated : 20-01-2025 Bid Document 1/5 EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Cut-off Wheel, CALIPERS, Industrial Safety Gloves- Leather and Cotton, Welding Hand-Shield For Eye Protector-IS:5983, DARK GLASS FOR WELDER'S SCREEN, Welding Electrode - Copper coated solid wire for CO2 gas shielded arc welding ( BEML) -as per C4002 BEML Welding Electrode, Hammers-IS 841:1983, Spirit level, Grinding Wheel-IS 2324, Try Square, Precision Height Gauge

Sewer Inspection Camera, Power Roding Apparatus, Hydraulic Sewer Root Cutter Nozzle, Gas Monitor, Safety Tripod, Nylon Rope Ladder, Blower with Aire Compressor, Full Body Wader Suit, Gas Mask, Breathing Apparatus, Safety Body Harness, Air Line ... of PPE Items

Emery Cloth (Q3), Industrial Safety Gloves- Leather and Cotton (Q3), Button Cell or Coin Cell Battery (Q3), battery cell as per IS:9128 and IS:8144 (Q4), magnifying glass (Q3), PTFE Teflon tape used in self closing valves of LPG cylinders (Q3), hand held search light (Q3), Ear Muffs (Q3), Pouches-IS:1462 (Q4), Domestic Vacuum Flasks as per IS 7708 (Q4)

Instant Glue, O Ring Cord, Anti Corrosive Ardox, Tray Paint Roller, Tape Measuring Steel, Safety Goggles, Chain Silver for Call Boatswain, Call Boatswain, Face Mask, Fluorescent Tape Yellow, Fluorescent Tape For Night Marking, Wipper Soft Rubber, Wind Socks, Twine Flax Sewing, Twine Flax Sewing Fine, Ear Plug, White Spirit, Silicon Sealant Compound, Rubber Latex Long Gloves, Tape Transparent, Soap Hard Yellow, Rope Wire Steel, Turpentine Oil, Thinner general Purpose, Tape Roll Seal Tefloan Thread, Silicon Cartridge Water Proof

Package No. 1 - ATAL TINKERING LAB OF NITI AAYOG ELECTRONICS DEVELOPMENT, ROBOTICS, INTERNET OF THI, Package No.2: ATAL TINKERING LAB OF NITI AAYOG RAPID PROTOTYPING TOOLS, Package No.3 ATAL TINKERING LAB OF NITI AAYOG MECHANICAL, ELECTRICAL and ... AND SAFETY EQUIPMENT

Industrial Safety Helmet with Lamp (Version 2) as per IS 2925 (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Pre Dispatch Name of the Empanelled Inspection Agency/Authority RITES Bid Number ( ) : GEM/2025/B/6109804 Dated : 04-04-2025 Bid Document 1/6 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Reserved for Make In India products Reserved for Make In India products Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Mechanically Woven, Double-Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses And Rock Fall Netting-IS:16014 (Q3), Tarpaulins made from High Density Polyethylene ( HDPE ) Woven Fabrics- as per IS: 7903 (Q3), hand held search light (Q3), ... Indusrial Safety Helmet (Png)-IS ...

Package No. 1 - ATAL TINKERING LAB OF NITI AAYOG ELECTRONICS DEVELOPMENT, ROBOTICS, INTERNET OF THINGS AND SENSORS (Q3), Package No. 2 Atal Tinkering Lab of Niti Aayog Rapid Prototyping Tools (Q3), Package No. 3 Atal Tinkering Lab of Niti Aayog ... and Safety Equipment (Q3)

Package No. 1 - ATAL TINKERING LAB OF NITI AAYOG ELECTRONICS DEVELOPMENT, ROBOTICS, INTERNET OF THINGS AND SENSORS (Q3), Package No. 2 Atal Tinkering Lab of Niti Aayog Rapid Prototyping Tools (Q3), Package No. 3 Atal Tinkering Lab of Niti Aayog ... and Safety Equipment (Q3)

Package No. 1 - ATAL TINKERING LAB OF NITI AAYOG ELECTRONICS DEVELOPMENT, ROBOTICS, INTERNET OF THINGS AND SENSORS (Q3), Package No. 2 Atal Tinkering Lab of Niti Aayog Rapid Prototyping Tools (Q3), Package No. 3 Atal Tinkering Lab of Niti Aayog ... and Safety Equipment (Q3)

Package No. 1 - ATAL TINKERING LAB OF NITI AAYOG ELECTRONICS DEVELOPMENT, ROBOTICS, INTERNET OF THINGS AND SENSORS (Q3), Package No. 2 Atal Tinkering Lab of Niti Aayog Rapid Prototyping Tools (Q3), Package No. 3 Atal Tinkering Lab of Niti Aayog ... and Safety Equipment (Q3)

POLISH METAL BRASS, SUPER MOP REFILL, TAPE TRANSPARENT 1 INCH, CANDLE WAX, ABRASIVE PAPER TAPE TRANSPARENT 2 INCH, ANTIRUST SPRAY, WONDER TAPE 2 INCH, SAFETY GLOVES, DISTILLED WATER, HAND WASH LIQUID, CLEANING LIQUID FOR UTENSILS, SCRUBBER WITH ... THIOUREA, SAFETY GOGGLES , ...

9KG ABC FIRE EXTINGUISHER HOSE, 25KG DCP HOSE WITH NOZZLES, 25KG ABC CYLINDER HOSE, 75KG HOSE WITH NOZZLES, 4 INCH BUTTERFLY VALVE, 6 INCH BUTTERFLY VALVE, HYDRANT POST WASHERS, WIND SOCKS CLOTH, MONITOR PICKUP TUBE, HVLR PICKUP TUBE 3 INCH, HVLR ... CHARGES, SAFETY GOGGLES KARAM ...

Custom Bid for Services - Value for Labour cost (WELDER) including Minimum wage, VDA, PPE kit and Uniform for 2 years including 18 percentage GST, Custom Bid for Services - Value for EPF, ESI, Bonus, PMSBY, PMJJBY and ASSY for the labours for 2 years including 18 percentage GST Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Value for Labour cost (WELDER) including Minimum wage, VDA, PPE kit and Uniform for 2 years including 18 percentage GST, Custom Bid for Services - Value for EPF, ESI, Bonus, PMSBY, PMJJBY and ASSY for the labours for 2 years including 18 percentage GST Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Value for Labour cost (WELDER) including Minimum wage, VDA, PPE kit and Uniform for 2 years including 18 percentage GST, Custom Bid for Services - Value for EPF, ESI, Bonus, PMSBY, PMJJBY and ASSY for the labours for 2 years including 18 percentage GST Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - Value for Labour cost (Semi- Skilled for CMM data & Record Maintenance) including Minimum wage, VDA, PPE kit & Uniform for 2 years including 18 percentage GST, Custom Bid for Services - Value for EPF, ESI & Bonus, PMSBY, PMJJBY & ASSY for the labours for 2 years including 18 percentage GST Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage

Labelling Stickers, Tab Nifedipine 10mg, Elbow length gloves, Mother baby tag, HB Strips with machine, Protein urea strips, Bukery ballon cathetra, Anterior vaginal retractor, Posterior vaginal retractor, Khayls forceps, Coper T removal hook, Baby ... specified, Gum boots , ...

Leather Hand Sleeve - BHEL (Q3), Industrial and Protective Rubber Knee and Ankle Boots- as per IS: 5557 (Q3), Welding apron (Q3), Welding Helmet-IS 5983 (Q3), scrubbing brush (Q3), Industrial Safety Gloves- Leather and Cotton (Q3), Gas Lighter (Q3), Welding Goggles For Eye Protector-IS:5983 (Q4), Safety Footwear - Bis Specification- IS:15298 Part 2 (Q3), welding cable (Q3), DARK GLASS FOR WELDER'S SCREEN (Q3), Welding rod for Low and medium alloy steel - as per 1395 (Q3), Welding Electrode - Copper coated solid wire for CO2 gas shielded arc welding ( BEML) - as per C4002 BEML Welding Electrode (Q3), Electrode Holder - as per IS 2641 (Q3)

Industrial Surgical Gloves Powder Free 5 MIL, Industrial Paper Mask 3 Layer with elastic ear band, Half Face Respiratoary Protection -3M 6200 -Complete Set, Purple Nitril Hand Gloves -Kimberly Clark, Round Cup Mask- N95 3M 9004, Cut Resistance Hand ... tested, Safety Helmet , ...

Anti Cockroach Gel, Baygon Spray, Bucket plastic 15 Ltrs Cap, Araldite Adhesive, Cloth bunting Red 57 width, Cloth bunding green 57 width, Bucket plastic 20 Ltrs Cap, Brush Steel wire, Boric Powder, Bleaching Powder Stablised, NCML Solution Teepol, ... cell, Safety gloves , ...

DRILL CHUCK 3 4 inc, DRILL CHUCK 1 2 inc KEYLESS, DRILL CHUCK 1 4 inc KEYLESS, PLAIN WELDING GLASS 12 SIZE 4 1 4 inc X 3 1 4 Inc, BLACK WELDING GLASS 12 SIZE 4 1 4 inc X 3 1 4 inc, BLACK WELDING GLASS 13A SIZE 4 1 4 X 3 1 4 inc, WELDING GOGGLES BLACK ... V, Safety Gloves Nitrile ...

Custom Bid for Services - MRPL Tender No 3900000871 Service code 1026540 Providing Engineer resource as per BOQ and in GEM overall total lump sum rate to be quoted considering 3636 days including GST, Custom Bid for Services - Service code 1041214 ... of PPE as ...

Cutting Wheel, Grinding Wheel, Pedestal Grinding Wheel Green, Pedestal Grinding Wheel Black, Abrasive cutting wheel, Abrasive cutter, Welding screen glass, Flat file, Round File, Half round file, Welding rod, Safety Goggles, Carbide Insert, Carbon brush hand grinder, Band saw blade, TeflonTapes standard, MIG Welding roll, Bench vice fixed basesize, Centre punch, Measuring Tape 5m, Band saw bearing, Gas cutter nozzle, Tap Handle, Magnetic VblockPair, Tap Set, Tap M8125mm, Tap M162mm, Tap M142mm, Tap M12125mm, Tap M12150mm, Tap M61mm, Tap Set size14BSP, Tap Set size 18BSP, Drill bit 18mm, Drill bit 16mm, Drill bit 14mm, Drill bit 12mm, Drill bit 11.5mm, Drill bit 11mm, Drill bit 8.2mm, Drill bit 6.2mm, Drill bit 6.5 mm, Drill bit 8.8 mm, Drill bit 8.5mm, Drill bit 5.5mm, Drill bit 5 mm, Drill bit 4.5mm, End mill cutter 8mm, End mill cutter 6mm, End mill cutter 4mm, Grinding wheel green, Grinding wheel Black, End mill cutter 10 mm, End mill cutter 16 mm, Chop Saw 350 mm, HSS Tap, Cutting Oil Bid Number : GEM/2025/B/6762675 Dated : 07-10-2025 Bid Document 1/46

Electronic component soldering machine 25 30 W, Manual wrench set 20 pieces, Watch maker tool set, 20 pieces screw driver set, Pipe tool wrench medium duty manual operated, Stripper for electric wires, Electric cable cutter steel, Hot gun for glue ... rechargeable, Safety jacket for ...

Anti Cockroach Gel or Chalk, Baygon Spray, Araldit Adhesive, Synthetic Liquid Detergent for Industrial purpose, Bucket Plastic 15 ltrs Capacity, Cloth Bunting Red 57 width, Cloth Bunting Green 57 width, Bucket Plastic 20 ltrs Capacity, Boric Powder, ... Roller, Safety Goggles , ... Putty, Safety Gloves , ...

Supply of manpower for the services like civil repair works, electrical work and pipeline repair or maintenance work for the colony qtrs and other buildings and operation and maintenance of bio gas (as detailed in scope of work in NIT) scope of work ... card, PPE and ...

Envelope Cloth Coated, Paint Roller, Bag Gunny, Synthetic Foot Mat, hand Wash Liquid, Paint Brush, Plastic Mug, Detergent Powder, Dut Bin, Cotton Waste, Bag Biodegradable for Garbage, Hand Towel, Brush Sweeping hand, Feather Broom Phool Jhadu, Super ... Roller, Safety Goggles , ...

Gum Boots, Rubber Gloves, Drugs Display Rack, Chairs, Cupboards, Plastic Trays, Plastic Containers 1 litr, multi PARA Cardiac Monitor, Glucometer, Green Colour Bag 30x40 inch, Black Colour Bag 30x40 inch, Red Colour Bag 30x40 inch, Yellow Colour Bag 30x40 inch, consentrated perfumed Phenyl 5 ltr, Dry Mop jambo size, Wet Mop jambo size, Bleaching Powder 25 kgs, Soap Oil 5 ltr, Hand Wash 5 ltr, Normal Saline 0.45percen 3L, Normal Saline 0.9percen 3L, TUR Infusion Set, 3 Way Foley Catheter 22F, 3 Way Foley Catheter 20F, DJ Stent 5F 26cm, DJ Stent 3.8F 26cm, Glycine 1.5percen 3L, Urografin 20ml, Guide Wire 0.0032 Terumo, Guide Wire 0.0025 Terumo, TUR Loop Double Stem, TUR Loop Single Stem, HF Cord Double Stem, HF Cord Single Stem, Toomy Syringe 100ml, complete Teeth Set, Cold Cure Powder 5 kgs, Heat Cure Powder 5 kgs, Heat Cure Liquid 4 ltr, Impression Paste 400 gms, Green Stick, Alginate 750 gms, POP 25 kgs, Vaseline 750 gms, Lower Anterior Teeth Set, Upper Anterior Teeth Set, Suction Tips, Etchant Gel, Cloth Roll 30m, Digital Weighing Scale, Sodium Fluoride Powder, Hack Saw Blade, Hack Saw Frame, Instrument Trolley, Wax for Sealing, Candles 8 inch, Crystal Salt 1kg, Whatman Filter Paper, Slotted Angle Rack, Plastic Basin Bowl 2L, Elbow Length Sterile Gloves, Office Chairs, all in one desktop, Elbow Operated Taps, Plastic Container 1L, Plastic Container 250ml, Eosin 500 ml, Methylene Blue 500 ml, Thymol, Sodium Borate 500 gms, Sodium Citrate 500 ml, Sodium Chloride EP 500gms, Wintergreen Oil 250 ml, Syringes 25cc Bid Number : GEM/2026/B/7080645 Dated : 09-01-2026 Bid Document 1/53

Hand wash Liquid, Cleaning Liquid for Utensils, Cleaning Bar for Utensils 500 Gm, Wiper long handle, Brush with long handle, Scrubber with Handle, Disinfectant Fluid white Phenoil, Rags Cotton coloured, Deodoriser Refill for Ship Head 8cm x 3 cm, ... cell, Safety Gloves , ...

Hand wash Liquid, Cleaning Liquid for Utensils, Cleaning Bar for Utensils 500 Gm, Wiper long handle, Brush with long handle, Scrubber with Handle, Disinfectant Fluid white Phenoil, Rags Cotton coloured, Deodoriser Refill for Ship Head 8cm x 3 cm, ... cell, Safety Gloves , ...