Loading
Loading…
Loading…
171 results • Best match
Const of underpass VUP LVUP SVUP for long term mitigation measure on potential BS loca from Bhonga Kheda to Suktara sec of NH44 at km 593.950 VUP 610.360 VUP 615.920 VUP 621.140 VUP n under Road Safety in MP on EPC Mode
Installation of Road Furniture for Enhancement of Road Safety on km 108.700 (Vadodara) to km 381.000 (Vapi) of 6-Lane NH-48 and Development of Model Safe Road from km 155.000 to km 175.000 of Vadodara-Bharuch section of NH-48 on Item Rate Basis
Convex Mirror (Road Safety) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Bidder Turnover, Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6498454 Dated : 25-07-2025 Bid Document 1/7 Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Element Air Cleaner, Cable Comp Front Brake, Shoe Comp Brake Rear, Oil Return Tube LH, Thermoplastic Hose, Dust Bag 3900040661, Brg Tapper Roller Rear
Convex Mirror (Road Safety) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6640440 Dated : 03-09-2025 Bid Document 1/5 Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Manpower Outsourcing Services - Fixed Remuneration - Admin; Administrative Operator or Office Assistant or Executive Assistant; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Others; Road Safety Trainer; Graduate
Road Signage Board with MS Frame and ACP sheet with UV Print 42 inch x 30 inch, Road Signage Board with MS Frame and ACP sheet with UV Print 60 inch x 32 inch, ACP Sheet Board with Iron Frame to Golden Mirror Letter 96 inch x 18 inch, Frosted Film UV Print 36 inch x 72 inch, ACP Sheet Board with UV Print 48 inch x 24 inch with SS Studs, ACP Sheet Board with UV Print 36 inch x 24 inch, ACP Sheet Board with UV Print 24 inch x 18 inch with SS Studs, ACP Sheet Board with UV Print 72 inch x 30 inch with SS Studs, Flex Banner with Frame 108x108 inch, Eco Vinyl with pasting 46x36 inch, UV Vnyl with pasting 60x36 inch, Cyber Security Poster with Frame 12 inch x 18 inch, Frosted Film Plan 36 inch x 72 inch, Instruction board with ACP Sheet and MS Frame, Metal Cust with UV Print 6 ft x 8 ft, Brass Chain 18 ft
Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others, Manpower Outsourcing Services - Minimum wage - Skilled; High School; Admin, Manpower Outsourcing Services - Minimum wage - Skilled; Graduate; Admin, Manpower Outsourcing ... State road safety Co ...
Talc Sheet, Plain File Cover, LRC Pad, A4 Cloth Envelope, FS Cloth Envelope, Red Plastic Road Safety Barrier, SS Bread Bin Kitchen Food Box, Duct Air Cooler, Display Board With Frame 12x10ft Naam Namak Nishan, Touch Less Dispenser Sanitizer Pump, Pen Stand, BP Checking Machine, Biometric Door Lock With Access, Brief Case For Mail, Wall Mounting Fan, Small Wall Fan, Weight Machine With Body Scanner, Apron Cloth, Knife Set, Soap Dispenser, Cable 2.5Core, Gas Pipe, Plastic Garbage Cover
Moving Die Rheometer - MDR, Carbon Black Dispersion Analyzer, Lab Mixing Mill -2 roll- Rubber and Thermoplastic Elastomer -Hot and Cold, Fatigue Testing machine for rubber, Melt Flow Index or Melt flow rate - MFI Digital, COMPUTERIZED Vicat Softening Point - VSP and Heat Deflection Temperature - HDT APPARATUS, vaccum type Rubber Compression Moulding Machine, Izod and Charpy Impact Tester Digital, UV light Accelerated Weathering Tester - Digital, Environmental Stress Cracking Resistance - ESCR for rubber, Scratch Hardness Tester, Flammability Tester -UL-94, Dumbbell Cuting Press with ASTM D412 all die types, IRHD hardness Tester Digital, Rebound Resilience Tester, Dynamic Mechanical Analyzer
LED Batten (Q2), MCB - Miniature Circuit - Breakers for A.C. Operation as per IS/IEC 60898 (Part 1) (Q2), LED Luminaire (Recessed Luminaire) (V3) Conforming to IS 10322 (Part 5/Section 2) (Q3), LED Bulkhead Light (Q3), LED Luminaire for Floodlight ... DK Thermoplastic cable ... DK Thermoplastic cable ...
plastic moulded chair Plastic Moulded Chair ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE SINGLE ... FILLED THERMOPLASTIC , ... UNFILLED THERMOPLASTIC , ...
Movement Sensor LED BATTEN 20W Aluminium housing with Pc difuser with IP 20, MOVEMENT SENSOR FOR LED LIGHT COMPATIBLE FOR 2KW Time Delay, Mirror for Bathroom with 3 in 1 Led Light WAM White and Warm White Wash Basin Mirror for Wall 24 X 24 Inch ... for cat eye solar ...
plastic moulded chair ( PAC Only ) Plastic Moulded Chair ( 10 ) ( Under PAC ) Make nilkamal Model chr2135 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE ... FILLED THERMOPLASTIC , ... UNFILLED THERMOPLASTIC , ...
tactical boot pu sole Average Turn Over of Last 3 Years 500 Lakh (s) Experience with Gov. Required 2 Year (s) Tactical Boot Pu Sole ( 880 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing ... puff Thermoplastic 2.0 ... Stiffener Thermoplastic 2.0 ...
LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II) (Q2), LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS Scheme - II) (Q2), LED ... delinater Road safety delinater ...
Air bubble film, Liquid Lab Wash Detergent, Insulated Electrical Conduits Pipe-IS 9537, Metal polish, liquid as per IS:5487, Plastic Buckets-IS 3730, Laminated Cloth Hessian, Gum (Paper Adhesives, Liquid Gum And Office Paste Type)- IS 2257, ... For Road Marking -IS:164, ...
VHIR Register, Asha Sangini Register, VHSNC Register, Sub Center Register Register, Asha Voucher Booklet, Asha Sangini Reporting Booklet, Asha Master Payment Register, Asha Home Visit Form-1, ASHA Monthly Reporting Form-2, ANM Reporting Form-3, ... Walls, Road Signage , ...
PVC bends, 110mm dia SWR PVC bends, 75mm dia SWR PVC Pipe clamps, 110mm dia SWR PVC Pipe clamps, Size 3 Hydraulic door closer bearing ISI mark To carry door a width upto 1000mm, Engine Oil 2T, Turpentine Oil, Water thinnable cement primer Alkali ... paint, Road marking paint ...
Steel Butt Hinges as per IS 1341 (Q3), Sinks (Q3), Metal Alloy Casting Water Tap with Aerator (V2) (Q3), Towel Rail Ring/Rack/Hooks for Bathroom (Q3), Towel Rail/Ring for Bathroom (Q3), Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3), ... Paint road marking white ...
Splice Closure for Optical Fiber Cables (V2) (Suitable For Non-Ribbon Fibre Splicing) As Per TEC Specification (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years Of Experience Yes | Complete Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6768017 Dated : 15-10-2025 Bid Document 1/10 Number of Auto Extension count 1 Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Primary product category Splice Closure for Optical Fiber Cables (V2) (Suitable For Non-Ribbon Fibre Splicing) As Per TEC Specification Time allowed for Technical Clarifications during technical evaluation 4 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Item wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India Schedule 1 EMD Amount (In INR) 12373 Schedule 2 EMD Amount (In INR) 62629 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 27 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). The EMD Amount will be applicable for each schedule/group selected during Bid creation. 2/10 (c)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : GAIL INDIA LIMITED NOIDA, GAIL India Limited, GAIL India Limited, Ministry of Petroleum and Natural Gas (Gail India Limited)